Used Mobile Hacker for sale (6,326)

Condition: new, Year of construction: 2025, Suction nozzle diameter: 1 x 200, 3 x 100 mm Nominal air flow rate: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Credshpmawepfx Aaxjd Weight: 178 kg

Condition: excellent (used), functionality: fully functional, power: 74.9 kW (101.84 HP), fuel type: diesel, overall weight: 10,500 kg, operation weight: 10,500 kg, first registration: 01/2009, Year of construction: 2009, operating hours: 4,809 h, Wacker Neuson 9503 EW/SW/4X4X4/Hydr. Adjustable / 4800 hours • Manufacturer: Wacker Neuson • Type: 9503 WD • Year of manufacture: 2009 • Operating hours: 4809 hours • Overload warning device • Transport dimensions: L: 5.88 meters x W: 1.92 meters x H: 2.88 meters • Power: 74.9 KW/102 hp • Engine: Deutz TCD 2012 • Maximum reach: approx. 6 meters • Digging depth: approx. 3.6 meters • Mechanical quick coupler system • Quick coupler: Lehnhoff / SW08 • High and low speed gears • Immobilizer • Auxiliary hydraulics • All-wheel steering 4x4x4 • Dozer blade • Total weight: 10500 kg • German machine • First owner • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. Cedpfezduh Usx Aaxerd - Sale subject to our general terms and conditions.

Condition: excellent (used), Year of construction: 2000, operating hours: 10,900 h, functionality: fully functional, overall weight: 16,000 kg, power: 308 kW (418.76 HP), Willibald MZA 3500 / Shredder / Chipper / Crusher • Manufacturer: Willibald • Type: MZA 3500 • Year of manufacture: 2000 • Operating hours: 10,900 hours • Engine: MAN D 2876, 6-cylinder diesel • Power: 308 kW / 418 hp • Inlet opening: 500 mm • Number of axles: 2 tandem axles • Braking system: Air pressure • Number of cutting blades: 48 • Rotor speed: 1300 rpm • Drawbar: 40 mm • Fiberizing of organic material for composting, up to a diameter of 30 cm • Shredding of old wood and waste wood, up to a diameter of 30 cm • Total weight: 16,000 kg • German machine Codpfx Aozdtzmjaxsrd • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, machine/vehicle number: 586A, overall weight: 2,000 kg, axle configuration: 1 axle, first registration: 06/2004, The mobile fitting ramp is in a fantastic condition directly from the military Well maintained and cared for, as good as new condition, the trailer is equipped with: 1 crank support at the front, 2 hydraulic supports at the rear with these the loading edge can be raised from 1030 mm to 1530 mm, the platform can be extended to a length of 5360 mm with the folding rear ramps, the total length of the ramp is 5840 mm. - The adjustment ramp is adjustable in height up to a height of 1580 mm - load capacity 2.5 tons, the ramp is made of aluminium and coated with anti-slip. - The hydraulic drive is 220Volt, extension cable with retraction mechanism integrated in the trailer. - The trailer has the dimensions L/W/H 5240/ 1920 / 1140 in folded driving mode. - The drawbar is height-adjustable - the trailer is overrun-braked with 40mm drawbar (can also be converted to a ball coupling, not included in the price) - tire size 215 R 14C, other extras: support wheel for cranking. - New price of the trailer was 50000 CHF - 3 pieces in stock ! ! - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal - Crodsqx S A Nopfx Aaxod

Condition: good (used), Year of construction: 2022, operating hours: 710 h, functionality: unexamined, Equipment: Methor chain basic package without shredding system Csdjvrz Rvopfx Aaxjrd - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min - 24-V electric control - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding funnel with path sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special equipment: Shredding system size L (8 teeth) Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Irrigation

Condition: good (used), Year of construction: 2022, operating hours: 2,806 h, functionality: fully functional, Equipment: Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Crjdswnfwqspfx Aaxjd Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Credpoxx Tigofx Aaxed Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2022, operating hours: 3,250 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Crjdpfoxx N T Isx Aaxed Central lubrication system Custom paint finish in RAL Delivery date to be arranged

Condition: used, Year of construction: 2022, operating hours: 4,561 h, functionality: fully functional, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Cedpjyhckmefx Aaxsrd Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: used, Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection Codpfxoxx N Dgo Aaxord - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2454320049, overall weight: 130 kg, total width: 660 mm, total length: 660 mm, total height: 980 mm, power: 1.5 kW (2.04 HP), input voltage: 230 V, cutting width (max.): 420 mm, Cardboard shredder for recycling cardboard and producing void fill material (cardboard mesh). Includes AL-KO extraction unit. Easy adjustment of the cardboard mesh width via a movable stop. Regardless of the width of the cardboard to be shredded, cardboard mesh of uniform width is always produced. Crsdpfx Aoy Dqvdeaxed

Condition: used, functionality: fully functional, empty load weight: 1,750 kg, total length: 4,465 mm, Year of construction: 2023, construction height: 2,750 mm, construction width: 2,500 mm, Truck Condition: Ready for operation and fully functional Technical condition: New Description: Mobile tire press for tire fitting. Industrial tires up to 20 inches, all tools included. Road approval. Codpsx Alniofx Aaxjrd Mobile tire press for tire fitting. Industrial tires up to 20 inches, all tools included. Road approval.

Condition: used, Year of construction: 2016, functionality: fully functional, Timber sawing line with horizontal band saw and timber outfeed mechanisation, including control cabinets and hydraulic unit. The roller conveyors are each 11 metres long. The mobile band saw is set up stationary and axles, wheels, tow bar and mudguards are present. Comes with 12 associated saw blades. Crsdpfxeypat Ie Aaxjd Available from mid-April/May Mobile saw Wimmer Zenz BN110, year of manufacture 2016, equipped as follows: Manufacturer: ZENZ Type: MOBILE SAW (MOBILSÄGE) Model: BN 110 Equipment: Clearance: 110 x 130 cm Cutting width: 95 cm Cast iron wheels, 850 mm diameter Band saw blade width: 100 mm Drive motor: 22 kW Length: 11 m with drawbar Width 2.55 m, height 2.70 m Weight: 3,500 kg Vertical support: 5.00 Log turner: 1.00 Level adjustment with claws: 4.00 Log roller: 2.00 Pre-cutter: 1.00 Official operational permit for overrun brake: 1.00 SPS control Band saw blade 6000x100x1.1 mm stellite Water cooling with 20 l barrel 20 l barrel and nozzle mounted on the blade guide Chain turner: 2.00 Extension 3 m without support beam Chip collection box

Condition: used, overall weight: 800 kg, working height: 2,201 mm, BPL – Flexi-Lift Brubek B.V. Mobile lifting aid Vertical lift: 1,950 mm Fast product lifting, raising, rotating, and repositioning User-friendly operation of the load lifter Mobile crane with a small footprint The system operates exclusively with compressed air Codpfezil Sbex Aaxsrd Flexible lifter Weight: 800 kg Operating height when lowering: 1551 Minimum operating height: 251 Maximum operating height: 2201 An inspection while the unit is powered can be arranged upon prior appointment. Price on request All technical specifications are subject to typographical errors and omissions Sale exclusively to countries within the EU.

Condition: used, Year of construction: 2014, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,000 m³/h, overall weight: 900 kg, inlet: 300 mm, negative pressure: 2,900 Pa, rotational speed (max.): 3,000 rpm, We offer our Höcker Polytechnik Vacumobil JT300-L – Industrial Dust Extraction Unit The Höcker Polytechnik Vacumobil JT300-L is a high-performance mobile industrial dust extraction system, designed for continuous operation in demanding woodworking and production environments. Equipped with automatic jet-cleaning (compressed air filter cleaning), this unit ensures consistent suction performance without downtime, making it ideal for workshops running multiple machines simultaneously. Key Specifications: Motor power: 7.5 kW Airflow capacity: 6,000 m³/h Codpfx Aoygw Rxjaxjrd Working airflow: 5,100 m³/h Negative pressure: 3,100 Pa Filter surface area: 28 m² Extraction inlet: 300 mm Collection capacity: large multi-bin system 500 liters Main Advantages: Continuous operation thanks to automatic jet-cleaning system High extraction capacity – suitable for multiple machines (CNC, edge banders, planers, etc.) Industrial-grade safety features, including backflow protection and integrated fire safety options Energy-efficient motor technology (IE3 / optional IE5) Robust and reliable German engineering Applications - perfect for: Woodworking workshops CNC machining centers Furniture production Medium to large industrial operations The JT300-L offers nearly double the capacity of smaller models (e.g. JT200), making it the ideal solution for businesses looking to scale up production while maintaining a clean and safe working environment. We also sell our smaller Höcker Polytechnik Vacumobil JT200-L on Machineseeker. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2014, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 3,400 m³/h, noise level: 71 dB, overall weight: 425 kg, extraction connection diameter: 200 mm, nominal flow rate: 3,400 m³/h, negative pressure: 2,900 Pa, rotational speed (max.): 3,000 rpm, We offer this used Höcker Polytechnik VACUMOBIL 200 mobile exhaust system, year of construction 2014. Manufacturer: Höcker Polytechnik Model: VACUMOBIL JT200-L JT = jet cleaning (compressed air filter cleaning) The JT version is an upgraded version of the VT (vibration cleaning) version. The JT200-L is ideal for continuous use (CNC, planing line, nesting) Crodpoygw Iqjfx Aaxod Better continuous operation Less maintenance during intensive use Type of input current: three-phase Negative pressure: 2.900 Pa Volume flow: 3.400 m³/h Overall weight: 425 kg Input voltage: 400 V Suction socket: 200 mm Power: 4 kW Rotational speed (max.): 3,000 rpm Input frequency: 50 Hz We also sell our JT300-L model on Machineseeker. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2017, operating hours: 6,100 h, condition: excellent (used), functionality: fully functional, Year 2017 6100 Hrs 1 Owner Csdpoxz R Tnefx Aaxjrd JCB Engine Fitted With 0-20 / 40mm Deck Extremely Well Looked After Unit

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: VWASGFF24A2114884, power: 81 kW (110.13 HP), mileage: 42,800 km, axle configuration: 2 axles, lifting height: 16,100 mm, lifting power: 210 kg/m, overall weight: 3,500 kg, empty load weight: 3,500 kg, construction height: 2,920 mm, fuel type: diesel, Working height: 18.10 m Platform height: 16.10 m Lateral outreach: 12 m Load capacity: 210 kg Self-leveling: No Crsdpsy Edbvofx Aaxsd Vehicle length: 6.70 m Vehicle width: 2.10 m Vehicle height: 2.92 m Adjustable front outrigger width: 2.67 / 3.45 m Rear outrigger width: 2.63 m Engine drive: Diesel Platform drive: Diesel / Electric 230V

Condition: good (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: VWASGFF24A2114885, power: 81 kW (110.13 HP), mileage: 21,991 km, axle configuration: 2 axles, load capacity: 210 kg, overall weight: 3,500 kg, empty load weight: 3,500 kg, fuel type: diesel, Working height: 20.80 m Platform height: 18.80 m Outreach at 200 kg: 8.00 m Outreach at 120 kg: 10.00 m Outreach at 80 kg: 11.00 m Slewing range: 360° Rotating platform: 2 x 90° Platform dimensions: 1.34 x 0.64 m Payload capacity: 210 kg Self-levelling system: No Vehicle length: 6.70 m Vehicle width: 2.10 m Vehicle height: 2.92 m Adjustable front outrigger width: 2.67 / 3.45 m Rear outrigger width: 2.63 m Unladen weight: 3,500 kg Cedpfeyia S Uex Aaxsrd Engine: Diesel Special features: No passenger seat

Condition: new, Year of construction: 2025, color: grey, Container description Our offer includes a complete package with high quality and is therefore unbeatable. We only purchase gas appliances from qualified, high-quality manufacturers. The construction and the entire kitchen with the equipment are NEW! 1. information about the container Availability: Delivery time immediately Color: Anthracite Delivery included in the price, delivery to the edge of the shelf. 2. structure made of isothermal aluminum fiberglass laminate with excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Dimensions Total length: 3000 mm Total width: 2000 mm Overall height: 2300 mm 3. gastronomic equipment; kitchen made of stainless steel and wood Gas appliances Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas deep fryer "Bertos" , 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 2 x 11 liter propane gas cylinders Cooling options Small under-counter refrigerator "Liebherr" Refrigerator with glass front, also suitable for drinks Water system Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with fittings Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Brushed stainless steel serving surface and work surfaces Insulating wall at the hob (fireproof) Extractor hood with labyrinth filters Non-slip floor for gastronomy Cjdpezg E Dljfx Aaxsrd Optional spit protection Access through a side door Warranty 1 year warranty on body and kitchen This price applies to the standard equipment shown. Changes or additions will incur additional costs. Of course, we can also build this model differently! Delivery time is 6 months. Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Condition: like new (used), functionality: fully functional, power: 20 kW (27.19 HP), gearing type: hydrostat, fuel type: electric, color: blue, overall weight: 13,700 kg, empty load weight: 13,700 kg, operation weight: 13,700 kg, lifting power: 11,000 kg/m, lifting height: 10,000 mm, tire size: Voor 315×70-15 | Achter 250×70-15, tire condition: 90 %, axle configuration: 4x2, number of seats: 1, first registration: 02/2014, mast type: telescopic, Year of construction: 2014, operating hours: 286 h, Equipment: adjustable boom, crane, hydraulics, === MAIN SPECIFICATIONS === Year of manufacture: 2014 Operating hours: 286 h Max. lifting capacity: 11,000 kg Total weight: 13,700 kg Power: 2 × 10 kW (80V electric motors) Drive type: Electric (battery 80V – 830Ah) Transmission: Front axle via gear reducer Steering system: Rear-wheel steering, hydraulic with load-sensing system Boom: Hydraulic telescopic boom (2 sections) Max. boom angle up: +60° Max. boom angle down: −10° Drive system: Electric with electronic speed control (MOSFET type) Tyres: Front: 4 × 315×70-15 | Rear: 2 × 250×70-15 (non-marking) Brakes: Hydraulic service brake, automatic parking brake Hydraulic system: Gear pump, 22 MPa maximum pressure CE certification: Yes (2006/42/CE – 2004/108/CE) Country of origin: Italy === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Crsdjxn Sm Aopfx Aaxjd Ready for immediate transport and use Fully electric drive – zero emissions Hydraulic telescopic boom with two extensions Non-marking tyres, suitable for indoor use Includes hydraulic winch, enclosed cab, and working lights === CONDITION === Excellent condition – only 286 working hours. Crane fully tested and ready for immediate use. Available from stock. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price €89.999 (EXW / excl. VAT). The JMG MC 110 is a powerful electric industrial crane with a lifting capacity of 11 tons and a high-strength telescopic boom. Thanks to its electric drive, compact size, and non-marking tyres, this machine is ideal for use in production halls, warehouses, and maintenance environments. The MC 110 combines precision, safety, and zero emissions — a reliable solution for indoor lifting operations. === DELIVERY === Crane loading available on request for smooth handling during shipment. Flexible delivery options tailored to your destination and logistics preferences. All shipments are professionally handled by the logistics team of Collé Rental & Sales.

Condition: used, Year of construction: 2024, functionality: unexamined, machine/vehicle number: 2945, Promag B3 Machine Data Designation: Promag B3 Max. Load Capacity: 1600 kg Year of Manufacture: 2024 Serial Number: PO1621 Lifting Devices Cedpfezim I Rox Aaxord Chain Hoist: LIFTKET 2000/2-3/0.75 Load Capacity: 1600 kg Lifting Height: 2 m Lifting Speed: 4.0 m/min

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2015, load capacity: 200 kg, lifting height: 10,000 mm, platform length: 750 mm, platform width: 980 mm, overall weight: 4,800 kg, construction height: 1,980 mm, next inspection (TÜV): 07/2027, fuel type: electric, color: yellow, Equipment: UVV, - Maintenance, new - UVV inspection, new - DGUV V3 inspection, new - Hydraulic hoses, new, 2022 4. KEY DATA AND DESCRIPTION 4.1. Key Data (technical data) Max. platform height: approx. 10.00 m Working height: approx. 12.00 m Max. lateral reach: approx. 5.15 m Slew range of the upper carriage: 355° Max. inclination during operation: 3.0° Weight: 4800 kg Platform load capacity: max. 200 kg Basket swivel: 1 x 90° / 1 x 85° Crjdozipz Hjpfx Aaxjd Basket dimensions: 0.75 x 0.98 m Gradeability: max. 16% Drive power (rated power of the drive unit): Driving: 2 x 2 kW Lifting – Steering: 2 kW Electrical system: Battery: 24 V 345 Ah Operating and control voltage: 24 V DC Control system: Electro-hydraulic Transport height: 1.98 m Transport width: 0.98 m Transport length: 3.24 m Outside turning radius: 1.47 m Inside turning radius: 1.20 m Ground pressure max. 2.8 t / wheel Basket arm angle: 145° Pivot point height: 6.50 m Hand-arm vibration < 2.5 m/s² Whole-body vibration < 0.5 m/s² Sound pressure level < 55 dB

Condition: used, first registration: 09/2012, TS Industrie Wood Chipper 190M Price incl. VAT. * 1251 m³/h Credpfx Aaezalrwsxod * Up to 19 cm trunk diameter * Hopper and discharge chute can be rotated * 50 hp Kubota diesel engine * Service and TÜV inspection included with purchase Errors and prior sale excepted.

Year of construction: 2004, condition: good (used), Atlas Copco XAS 67 air compressor 3.7 m3/min Operating hours: 2,371 hours Crodjiywpzopfx Aaxsd Deutz engine Type: diesel