Used Mk4 for sale (241)

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 400 mm turning diameter over support: 220 mm turning length: 1100 mm centre height: 180 mm spindle passage: Ø 45 mm range of revolution per miute: 31,5 - 1.400 / 12 step U/min range of feed in x - axis: längs: 0,08 - 1,10 m/min range of feed in y - axis: quer: 0,028 - 0,40 m/min tailstock quill taper MT: MK4 tailstock quill adjustment: 200 mm total power requirement: 4,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,5 x 1,1 x 1,4 m Equipment: -Three-jaw chuck Ø 250mm manufacturer Forkardt with interchangeable jaws -Multifix steel holder -Cooling water device with pump -chuck guard -chip collecting tray Godpfx Aou Ix E Hecmekd -chip guard Accessories: -chuck spanner -tool holder -2 pieces gears *

Condition: used, mileage: 114,000 km, power: 350 kW (475.87 HP), first registration: 10/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Mercedes Benz Arocs 2648 / 6x4 / Truck-Mounted Crane / Assembly Crane / Roofer Crane!! Operating hours approx. 1500 hrs. GERMAN VEHICLE, all inspections performed by Mercedes Benz, original paint. CRANE: MKG / HMK 401 HPA 4 L / Rope winch, remote control, 26 m fully hydraulic - 900 KG, plus 2 x mechanical to 31 m - 400 KG. Gjdpfx Acsz Dlw Remjkd Axle load, front axle: 9.0 t, trailer brake: 2-line, audio-navigation system with Bluetooth comfort features, exhaust pipe downwards on the right, battery 220 Ah, air horn, electrical pre-wiring in the cab 24V / 100 A, suspension: rear leaf springs 2x13.0 t, suspension: front leaf springs 9.0 t, 4 leaves, parking brake additionally on the front axle, storage compartment on the upper rear wall, transmission: 12-speed - type: G 330-12, transmission lock for auxiliary drive, rear lights: construction site version, info display 12.7 cm with video function, fuel tank: 390 L, steel, left, air intake on the side of the cab, engine brake reinforced, auxiliary drive: MB 124-10c, parameterizable special module, spare wheel, pipe rupture protection in the brake system, reversing warning audible (external warning signal), rear cross member reinforced, drawers under the dashboard, seats in the cab: armrest for passenger seat, seats in the cab: driver's seat, comfort suspension seat, sun visor outside, sun protection roller on side windows, driver's and passenger's door, voltage converter 24V / 12V 10 A, steel rims 11.75x22.5 (on the front axle), steel rims 9.00x22.5, 12V socket additionally, 24V socket in the passenger footwell additionally, stone guard, carpet on the engine tunnel, door extension for the cab, CB radio preparation, preparation for reversing camera, straight front axle, increased ground clearance, additional thermal insulation, auxiliary heater (water), twin-disc clutch. Emission standard EURO 6, axle configuration: 6x4, trailer socket: 24V / 15-pole, Arocs, exterior mirrors electrically adjustable and heated, differential lock: rear axle, compressed air connection in the cab, compressed air tank: steel, cab: width 2.30 m, cab: mobile cab access, cab: hydraulic tilting mechanism, cab: L StreamSpace, cab variant: StreamSpace, cab: steel-sprung, comfort features, stowage compartment outside left, stowage compartment outside right, lift roof electrically, windshield tinted with band filter, preparation for comfort bunk above, wide, curtain for the sleeping cabin, seats in the cab: driver's seat backrest foldable, suspension: leaf spring / leaf spring, power windows, vehicle without rear window, generator 100 A, urea tank (AdBlue): 60 L, rear axle: bevel gear 233, interior filter: pollen filter, body / superstructure: chassis, comfort bunk below, comfort locking system, steering pump unregulated, air compressor: 2-cylinder, air dryer heated, engine: 12.8 L - 350 kW R6 diesel (OM 471), engine compartment encapsulation, ramp mirrors, waste heat recovery, disc brakes with partial protection, disc brakes on front and rear axles, seat cover / upholstery: fabric, seats in the cab: passenger multi-contour seat, stabilizer: rear axle, stabilizer: front axle, socket in the cab 24V, tachograph / EC control unit, underrun protection rear, fixed, preparation for toll collection, water pump regulated, permissible gross weight 26.0 t, oil cooler, transmission.

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, quick-release drill chuck, milling chuck, quick-change insert, collet chuck, reducing sleeves, snap-on holders, quick-change conical sleeve, reducing sleeve for tool holder systems, cylindrical Morse taper sleeve -Manufacturer: Multifix, Quick-change conical sleeve, cylindrical Morse cone sleeve, 6 pieces -Type: BL 440 MK 4 -Sleeve: Ø 40 mm Gkedpfx Ao Ahhgvscmsd -Morse cone: MK4 -Submission/Price: complete -Dimensions: Ø 44 x 145 mm -Weight: 0.7 kg/pc.

Condition: used, fixed center, fixed live center, fixed morse taper, fixed center, center Godoi Hmn Nopfx Acmjkd -Manufacturer: WMW ABW, fixed center point -Intake: Morse taper MK4 -Number: 17x centering tips available -Price per piece -Dimension: Ø 33/160 mm -Weight: 0.8 kg/pc.

Condition: used, Year of construction: 1992, operating hours: 53,500 h, functionality: fully functional, CNC turning machine Manufacturer: GILDEMEISTER Model: CTX-400 Year of manufacture: 1992 Control system: EPL-2 Operating hours: approx. 53,500 h Serial number: 310549 Technical data: - Turret: 12 stations VDI-30 of which 6 stations are driven - Spindle speed: 25 - 5,000 rpm Drive power: 27.5 kW at 60% duty cycle - Spindle bore: Ø 72 mm - X-axis travel: 212 mm Godpfxjzcd Hlo Acmjkd - Z-axis travel: 640 mm - Max. turning diameter: 500 mm - Turning diameter over guide: 290 mm - Hydraulic steady rest (following rest) Quill stroke 100 mm / MK4 mounting - Hydraulic steady rest SMW Autoblok - Hydraulic 3-jaw chuck 200 mm - Collet chuck Hainbuch - Chip conveyor - Parts catcher (disassembled / incomplete) - Complete programming manual - Mechanical and electrical documentation - Large accessory package of jaws / holders - Spare parts package (drive belts / small parts) - 2x foot switches - Machine weight: 5.2 t - Loading onto truck included

Condition: new, Drilling capacity cast iron / steel ----- 35 / 30 mm Tapping capacity cast iron / steel ----- 22 / 20 mm Motor ----- 1.5 kW Speed range ----- 75 ~ 3200 rpm Spindle stroke ----- 130 mm Spindle adaptor ----- MK4 Cross table ----- 600 x 190 mm Foot ----- 650 x 450 mm Diameter T-slots ----- 12 mm Maximum distance spindle - table ----- 610 mm Maximum distance spindle - foot ----- 1180 mm Weight ----- 390 kg Gkedeq E N Uxjpfx Acmod INCLUDING * LED work light * Cooling system * Digital depth stop * Tapping function * 2-speed motor 75-3200 rpm * CE plug * Toolbox with various tools

Condition: new, Drilling capacity cast iron / steel ----- 35 / 30 mm Tapping capacity cast iron / steel ----- 22 / 20 mm Motor ----- 1.5 kW Speed range ----- 75 ~ 3200 o/min Spindle stroke ----- 130 mm Spindle adaptor ----- MK4 Drilling table ----- 540 x 470 mm Foot ----- 650 x 450 mm Diameter T-slots ----- 12 mm Maximum distance spindle - table ----- 610 mm Maximum distance spindle - base ----- 1180 mm Weight ----- 320 kg INCLUDING * LED work light * Cooling system * Digital depth stop * Tapping function Gsdeq E N U Hjpfx Acmskd * 2-speed motor 75-3200 rpm * CE plug * Toolbox with various tools

Condition: new, spindle mount: MK 4, rotational speed (max.): 1,600 rpm, rotational speed (min.): 95 rpm, – Capacity: MK4 Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Tapping capacity in steel: M24 Gedpfoy Etyhex Acmjkd Tapping capacity in cast iron: M32 – 95/1600 rpm – Tapping function – Table 540 × 470 mm – Coolant system – Gear drive – Safety guard – Emergency stop – Tapping head with collets – Documentation – 400V

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional cylindrical grinding machine EMAG W 11 Evolution. The conventional external-internal face cylindrical grinding machine fits perfect for single parts, prototypes and small batches. The basis of the EMAG W 11 Evolution machines is the established KARSTENS cylindrical grinder concept. No hydraulics, axis drives with servo motors and screw spindle drive, technology entry of the grinding parameters via touchscreen, automatic dressing with compensation, automatic axis release. TECHNICAL DATA Workpiece lenght: max. 1,500 mm Center height: 200 mm | Ooption 320 mm Workpiece weight: 250 kg Gkjdpfx Aetmrlhscmed External grinding wheel diameter: max. 500 x 80 mm Workpiece headstock: MK4 | Option MK5 / MK6 Tailstock: MK 4 Price, delivery time and equipment of the machine according to agreement.

Condition: used, axle configuration: 3 axles, first registration: 06/2014, color: other, Tail lift: Yes = More information = Year of construction: 2014 Rear axle 1: Lift axle; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Steering; Tyre profile left: 50%; Tyre profile right: 50% Empty weight: 18.580 kg = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. Gsdjzuckrepfx Acmokd You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Gedpfsharwvjx Acmekd Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Distance from spindle nose to table 545 mm (short quill) Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, quick-release drill chuck, milling chuck, quick-change insert, collet chuck, reducing sleeves, mounting bracket -Quick-change chuck: Mount: MK4 / 32 mm -Measurements: see photos -Dimensions: Ø 72 x 210 mm -Weight: 2.1 kg Gsdpfx Acjhh Tktomjkd

Condition: as good as new (ex-display), Exhibition Machine Aluminum format sliding carriage (anodized) with hardened steel guide rods. Kickback protection for thickness planer. Anodized parallel fence with micrometric fine adjustment. Saw blade tilting up to 45° via handwheel. Table opening ø260 mm with under-table extraction. Milling fence 250 mm. Slot mortising table with Westcott collet chuck, Mori safety device. Exchangeable milling spindle with MK4 mount, made in EU! Jointer unit: Table width 410 mm Table length 1800 mm Cutterhead diameter 100 mm Number of cutter knives 4 pcs Cutterhead speed 4500 rpm Motor output 5 kW (S6) (4 kW S1) Thicknessing unit: Thickness capacity min/max 4 – 225 mm Feed speed 8 m/min Spindle moulder: Gsdpfx Ajwzzguocmekd Usable spindle length 125 mm Spindle height adjustment 175 mm Motor output 5.5 kW (S6) (4.5 kW S1) Max. tool diameter: For profiling 250 mm For tenoning 300 mm Spindle speeds 10000/8000/6000/5000/4000/3000 rpm Table openings 260 mm Circular saw: Sliding table length 3000 mm Saw blade diameter min/max 315 mm / 250 mm Tilting range 90° - 45° Max. cutting height 90° / 45° Saw blade 315 mm 103 / 72 mm Motor output 5 kW (S6) (4 kW S1) Weight 1090 kg Slot mortising table: Table size 300 x 500 mm Drilling length 250 mm Drilling depth 210 mm Height adjustment 160 mm

Condition: new, Year of construction: 2026, The CORMAK ZX 7055 VARIO DRO milling and drilling machine is a high-performance universal machine designed for drilling, milling, and tapping operations in steel and cast iron. Its robust cast-iron construction, continuously variable spindle speed control in two ranges, and digital position readout system ensure high accuracy and repeatability in single-piece and small-batch production. Main Advantages of the Machine Rigid cast-iron base and column – provide excellent stability during machining of demanding workpieces, reduce vibrations, and extend tool life. Continuously variable spindle speed control in two ranges: Low range: 75–438 rpm High range: 438–2500 rpm Allows optimal selection of cutting parameters depending on tool diameter and material. 2-axis digital readout system (DRO) – enables fast and accurate positioning while reducing setup time and eliminating reading errors from manual scales. Gkjdjyapyrspfx Acmjd Automatic spindle feed – ensures smooth cutting performance and reduces the risk of drill breakage during deep drilling operations. Thread cutting function – after reaching the preset tapping depth, the spindle automatically reverses direction. Ground gears – provide quiet transmission operation and stable spindle torque. Dovetail slideways on machine axes – ensure precise table movement and accurate geometry. Rotating head ±90° with height adjustment – allows easy execution of angled machining operations, chamfers, and undercuts. Left/right spindle rotation – enables safe tapping and tool withdrawal. Efficient cooling system – effectively removes heat from the cutting zone, prevents overheating of tools and material, improves machining accuracy, and extends cutting tool life. The core of the machine is a heavy cast-iron structure with wide guideways, minimizing deflection during face and end milling operations. The large cross table provides a spacious working area and features a precisely ground surface to ensure accurate workpiece positioning. The spindle with an MK4 taper is driven by an S1/S6 1.5/1.8 kW motor with variable speed control. The integrated cooling system stabilizes the cutting temperature and improves the quality of machined surfaces. The combination of a 2-axis DRO system, ground gears, and rigid guideways provides excellent dimensional repeatability and high surface finish quality. The automatic spindle feed and two-speed spindle range allow optimal machining parameters for: drilling in steel up to Ø32 mm, drilling in cast iron up to Ø45 mm, face milling up to Ø80 mm, end milling up to Ø28 mm. Standard Equipment Variable spindle speed control 2-axis digital readout system (DRO) Ø80 mm milling cutter head with inserts Drill chuck Cooling system Technical Specifications Parameter Value Maximum drilling capacity – cast iron (HT200) 45 mm Maximum drilling capacity – steel 32 mm Maximum face milling diameter 80 mm Maximum end milling diameter 28 mm Working table dimensions 820 × 240 mm Table travel (X/Y) 595 / 185 mm Maximum tapping capacity M24 Spindle taper MK4 Motor power (S1/S6) 1.5 / 1.8 kW Low spindle speed range 75–438 rpm High spindle speed range 438–2500 rpm Spindle travel – manual 107 mm Spindle travel – automatic 100 mm Distance spindle axis to column surface 250 mm Maximum distance spindle nose to work table 445 mm Net weight 350 kg Overall dimensions 1084 × 924 × 1550 mm Height with base 2150 mm

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Distance between centers: 1100 mm Center height: 180 mm / (250 mm = Option) Workpiece weight: 100 kg cantilevered, 300 kg between centers Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MK 4, stepless speed control 30-450 rpm, swivel range 0 - 90° Tailstock: MK4, quill travel 45 mm Gksdjh Rimmspfx Acmod Quill force: 200-600 N manual, (up to 2500 N possible, adjustable = Option) Table inclination: 10 degrees Travel of the infeed spindle: 80 mm Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm Grinding spindle motor external: 4 kW / (5.5 kW = Option) Stepless speed adjustment of the grinding wheel with potentiometer Grinding spindle motor internal: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor 1.5 kW Lubrication motor 0.1 kW Hydraulic tank 80 liters Machine weight: Net 3800 kg Infeed drive via DC motor Air cushion-assisted rapid adjustment of the grinding spindle head for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operating sequence, infeed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, infeed stop, incremental infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle head with steplessly adjustable drive with a rotating and lockable spindle. New digital infeed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, input for retraction, infeed increments, feeds, dwell times, clearance strokes, compatible with the old Karstens infeed control, with a color Siemens touch panel similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver -Front face driver: Mount: MK4 -Front dimension: Ø 20 mm -Dimensions: Ø 42 x 203 mm Gedpeuwgf Hjfx Acmskd -Weight: 1.0 kg

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver -Front face driver: Mount: MK4 Gedpsuza N Tsfx Acmekd -Front dimension: Ø 19 mm -Dimensions: Ø 34 x 162 mm -Weight: 0.6 kg

Condition: refurbished (used), Year of construction: 2026, Karstens K11 1000, Fully Equipped This cylindrical grinding machine has been completely overhauled at PS-Karstens. The machine has been inspected and is in very good condition. Since we specialize in Karstens cylindrical grinding machines, we can offer you a complete service (electrical and mechanical) for the machine after purchase. Technical Data: Center distance: 1000 mm Gkodpfx Aceh Riwdomed Center height: 180 mm Workpiece weight: 100 kg (overhanging), 250 kg (between centers) Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, stepless speed adjustment 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill stroke 45 mm, fine adjustment with cylinder Quill force: 200-600 N, hydraulically operated via foot pedal Table inclination: 10 degrees Adjustment travel of the feed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3800 kg Feed drive via DC motor Air cushion-assisted rapid adjustment of the grinding spindle head for quick and safe approach to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operating sequence, feed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, incremental feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle head with steplessly adjustable drive with a rotating and lockable spindle. Feed control for longitudinal grinding and plunge grinding, input for retraction, feed amounts, feeds, dwell times, rapid traverse Digital displays for grinding spindle B-axis, workpiece spindle, X-axis, Z-axis from HEIDENHAIN Paper band filter system, approx. 250 L Similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: used, live center, live center, live morse taper, live center, live lathe center, live center, centering cone Gedpfx Aetxkvfjcmekd -Manufacturer: ABW, rotating center point -Type: ZN 204 -Recording: MK4 -Dimensions: Ø 70 x 220 mm -Weight: 2.1 kg

Condition: good (used), Quick-change chuck, quick-change mount, quick-change head, quick-clamping drill mount, quick-change insert -without: admission -3x Sleeve: MK2 -3x Sleeve: MK3 -4x Sleeve: MK4 -Hole: Ø 42 mm -Price/Sale: complete Godscti A Sspfx Acmekd -Total weight: 11.8 kg

Year of construction: 2000, condition: ready for operation (used), General Data Measurements width 2105 mm Measurements depth 3485 mm Machine weight 7500 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 3500–5000 Spindle bore 61 mm Number of axis 4 Movement X-Axis Movement 530 mm X-Axis Feed Force 0–6000 mm/min X-Axis Rapid Traverse 30 m/min Y-Axis Movement ±70 mm Y-Axis Feed Force 0–6000 mm/min Gedpfx Acsx D N Ipomjkd Y-Axis Rapid Traverse 15 m/min Z-Axis Movement 1065 mm Z-Axis Feed Force 0–6000 mm/min Z-Axis Rapid Traverse 33 m/min Tail Stock Pinol diameter 80 mm Pinol way 870 mm Pinol tool taper MK4 Tools Number of station 20 Max weight 7 kg Max tool diameter 90 mm Max tool length 250 mm This 4-axis Mazak INTEGREX 200 Y was manufactured in 2000. It features a maximum turning diameter of 540 mm, a swing diameter of 540 mm, and a bar diameter capacity of 51 mm. The machine supports a workpiece weight up to 150 kg and offers a spindle speed range up to 5,000 rpm. It includes a Mazak KM 63 quick change tool system with 20 slots. If you are looking to get high-quality turning capabilities, consider the Mazak INTEGREX 200 Y machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), tool holder, milling holder, milling tool -7x shots: SK40 -Adapter -Mounting: SK40 -Holder tool: MK4 -Drill chucks, face chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 9.4 kg Gedec Il Ehspfx Acmjkd

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Center distance: 1100 mm Center height: 180 mm / (250 mm = Option) Workpiece weight: 100 kg unsupported, 300 kg between centers Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MK 4, infinitely variable speed adjustment 30-450 rpm, swivel range 0 - 90° Tailstock: MK4, quill stroke 45 mm Quill force: 200-600 N manually, (up to 2500 N possible, adjustable = Option) Table tilt: 10 degrees Adjustment travel of feed spindle: 80 mm Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW / (5.5 KW = Option) Infinitely variable speed adjustment of the grinding wheel with potentiometer Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 1.1 KW Hydraulic motor: 1.5 KW Gkodpfxjiv Au Ee Acmsd Lubrication motor: 0.1 KW Hydraulic tank: 80 liters Machine weight: Net 3800 kg Feed drive via DC motor Air cushion-assisted rapid adjustment of the grinding spindle stock for quick and safe approach to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operating sequence, feed movement via wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, incremental feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with infinitely variable drive with a rotating and lockable spindle. New digital feed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, input for retraction, feed amounts, feeds, dwell times, rapid traverse distances, compatible with the old Karstens feed control, with a color Siemens touch panel, scale in X and Z axis, manufacturer HEIDENHAIN. Similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: ready for operation (used), A Mori Seiki CNC lathe is available. Swing diameter over bed/slide: 450mm/300mm, max. turning diameter: 160mm, turning length: 525mm, travel X/Z: 135mm/560mm, bar capacity: 42mm, spindle bore: 52mm, spindle nose: JIS A2-5, spindle speed: 5000rpm, power: 7.5kW, torque: 172Nm, tool stations: 12, tailstock taper: MK4, quill diameter: 75mm, quill stroke: 80mm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2500mm/1500mm/1700mm, weight: approx. 3250kg, control: Fanuc Series 15-T. Documentation available. An on-site inspection is possible. Gksdpfozipf Sjx Acmsd

Condition: new, functionality: fully functional, spindle bore: 26 mm, turning diameter: 250 mm, turning diameter over top slide: 145 mm, center height: 125 mm, turning length: 750 mm, total length: 1,520 mm, total width: 670 mm, total height: 1,650 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 50 rpm, bed width: 135 mm, type of input current: DC, overall weight: 195 kg, three-jaw chuck diameter: 125 mm, spindle mount: MK 4, Turning and milling combination WMP250BVx750 with brushless motors including a luxury base cabinet LATHE Center distance ----- 750 mm Center height ----- 125 mm Diameter over bed ----- 250 mm Headstock bore ----- 26 mm Headstock spindle mount ----- MK4 Lathe speed ----- 50-2000 continuously variable rpm Gedsga T Emepfx Acmskd Motor power ----- 1.1 kW Weight ----- 135 KG MILLING UNIT Overhang of milling attachment ----- 170 mm Milling machine speed ----- 50-2250 continuously variable rpm Milling machine spindle mount ----- MK2 Milling head rotatable ----- +/- 90 degrees Travel of milling spindle quill ----- 50 mm Motor power ----- 600W Weight ----- 75 KG