Used Miter Fence for sale (1,858)

Condition: used, Year of construction: 2015, - Feed rate: maximum 40 m/min - Motor power: 5.5 Kw - Working length: 7.35 meters Miter saw Manufacturer: Tigerstop Type: UKA 600 Year of manufacture: 2015 Tiger UKA 600 miter cutting system consisting of: Tiger Stop 7.5 automatic feed and stopper Overall length: 7.95 meters Working length: 7.35 meters Net working length (automatic saw): 6 meters Voltage: 220 volts 50 Hz Motor power: 0.45 Kw Feed rate: maximum 40 m/min (depending on the load) Accuracy: +/- 0.4 mm as a sliding guide. Infeed table for TigerStop 6.8 Overall length: 7.4 meters Chedpezuyx Hjfx Ap Dsd Table width: 325 mm Upward stroke miter saw model UKA 600 with pneumatic lift and clamping device Saw unit mounted on a rotary table with diameter: 980 mm Diameter of the saw blade: 600 mm Cutting capacity: 165 x 240 mm at 90 degrees Maximum cutting height: 165 mm at the fence and 175 mm diameter (at 90 degrees) for round material Cutting angle: 30 - 90 - 30 degrees 45 - 90 - 45 degrees with automatic function Motor power: 5.5 Kw Voltage: 400 volts 50 Hz Working height: 920 mm The machine is controlled by a push button for semi-automatic operation or fully automatically for 90-degree angles via the TigerStop. The rotary table is controlled by a Tigerstop servo drive TigerDrive. Outfeed/infeed table with side protection Length: 3.7 meters Width: 325 mm PC control with Beamworks program, computer with touch panel and computer cabinet. Cutting list download option for csv file. Extension with 6-strand flipper loading device For automatic loading of material with a length of 500 - 6000 mm. Shorter pieces can be placed directly on the infeed table. Loading device consisting of: 6 flipper beams with tables including the 2 aluminum profiles 80 x 40 mm per beam, the flippers, the connecting tube, 1 pneumatic cylinder with 24-volt valve. The net loading length is approximately 1.38 m. 1 additional support strand without flipper on the outside of the loader 2 extra cylinder set for the loading device Complete electrical control cabinet with PLC, power supply, Emergency stop safety relay, complete wiring etc. (Including additional electrical wiring for the safety fence door) Label printer package for Beamworks Safety fence on the back of the machine, only on the infeed side. Including entrance door with safety lock And additional protective device on the front to prevent intrusion between the loading strands. Product length measurement with sensor in the protective cover, controlled by the Tigerstop control. The length measurement and download with Tigerlink only work with 90-degree cuts. Tigerlink download software for downloading a csv file (cutting list). Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Miter saw, complete with machine stand, manual stop, 3 m infeed roller conveyor RLK, and 2 m outfeed roller conveyor RO. Chjdpfx Ae Aax Aljp Djd

Condition: ready for operation (used), Year of construction: 1993, Langzauner LZK 4 edge sanding machine with oscillating veneer edge sanding unit Sanding unit infinitely adjustable from 0- 45° miter fence Oscillation Height-adjustable sanding beam to utilize the entire belt width Table size 1250 x 350 mm Motor power 3kW Belt length 3000 mm Chodpfx Asuacg Aop Dod Belt width 200 mm Belt speed 22m/sec Weight approx. 450 kg Space requirement 1900 x 900 mm year of construction 1993 Condition checked for function Price 5500.-

Condition: used, Martin T 65 C Automatic panel saw Heavy-duty precision panel saw 5.7" touchscreen LCD color display at eye level Motor: 5.5 kW Saw blade adjustable from 0 to 46° Cutting height up to 204 mm Saw blade diameter up to 550 mm “ProLock” quick-change system for saw blades Anodized aluminum length stop with continuous support, fine adjustment for both folding stops, scale with magnifying glass, and electronically assisted length compensation for angled cuts. Extendable cutting length: 95–3,220 mm Rip fence length: 3,000 mm Electromotive parallel fence positioning with control system integration, anodized, folding aluminum guide rail, and four-point ball bearing guide. Safety area (0–200 mm) in hold mode, display resolution 0.1 mm, repeatability ±0.05 mm. Cutting width with parallel fence: 1,100 mm Double miter fence MitreX CE version Machine is WORKS-TESTED, in very good condition, from a small business First delivery 2016 Codpfx Ae Aba Dmep Dshd Ex works

Condition: used, Year of construction: 2026, New demonstration machine! General technical features: - Control: 7.0" touchscreen ConnectTouch control - Cutting height and cutting angle electronically controlled, digital input of cutting height and angle (controlled positioning of the motorized axes) and movement of the motorized axes in hold mode (axis movement via push button); display resolution: 0.1 mm or 0.01°; repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron, table extension as standard across the entire table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite structure, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm, main saw blade ø 30 mm with additional holes, scoring saw ø 36 mm, tool cutting width max. 20.0 mm for machines with single-sided tilting, 6 mm for machines with double-sided tilting; saw blades up to 350 mm can be lowered under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool tilt: 0° to + 47°, tilting only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / saw blade ø 450 mm; T7710/1: +45°: 106 mm / ø 450 mm; T7710/2: +45°: 104 mm / ø 450 mm; -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, due to its design, the motor can be overloaded several times its rated power for a short period of time and thus offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is rotatably mounted around its vertical axis. In addition, it can be swiveled to the right, so that larger components can also be processed easily - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stop elements; dimension display via scale with magnifying glass; cutting length 95 - 2000 mm, extendable up to 3220 mm - Cross table: Made of powder-coated steel, workpiece support in anodized aluminum, two sliding supports for extending the support area; length stop can be placed in the front and rear position without lifting; one-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating, Cast iron: Table surface finely milled, Aluminum: Aluminum components anodized - Protective cover / extraction: Height-adjustable protective cover incl. interchangeable rear part for miter cuts; protective cover for saw blades up to ø 450 mm (optionally 550 mm); extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; total extraction connection Ø 140 mm; minimum air volume: Vmin 18.5 m3/min at 20 m/s, negative pressure 1,400 Pa - Electrical equipment: Contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (control panel, stand) Cedpez A Hh Usfx Ap Dohd

Condition: like new (used), functionality: fully functional, Panel Dividing System SCHEER FM 16 – DNC 3100 x 3100 As New – Machine No. 33542 The SCHEER FM 16 is a high-performance, electronically controlled panel dividing saw featuring advanced drive technology and an intuitive control interface. The machine has been fully overhauled and newly painted – its condition is virtually as new. Ideal for precise, automated cutting of wood-based panels in continuous industrial operation. Main Technical Data: • Cutting length: 3100 mm • Cutting depth / Blade projection: 80 mm • Saw motor: 7.0 kW • Scoring motor: 1.1 kW (can be switched off) • Feed speed: 2 – 40 m/min (steplessly adjustable) • Return: Rapid traverse, automatic lowering • Operator interface: SCHEERWIN, graphical, document-oriented (64-bit) on Windows 10 • Drive system: Küenle frequency inverter with Stöber synchronous servo drives incl. absolute encoder – for highest positioning accuracy and dynamic control Features & Highlights: • FM 16-3100 longitudinal cutting saw with hardened guides and automatic forward/reverse travel • HP 5021 material feed table with 6 clamping carriages, servo drive & measuring resolution of 0.05 mm • WP angular pressure system, 2400 mm adjustment range, fully automatic • SP 5000 remnant cutting device for offcuts down to min. 5 mm • HP 5024 miter fence table (1800 x 800 mm), steel angle with Pertinax overlay Chedpfxsunwk Te Ap Dod • HP 5025 workpiece support table (1800 x 800 mm), also with Pertinax overlay • Air cushion system in the front tables, including radial fan Saw blades included: • KSB 4005 for main saw (ø 305 mm, Z = 60) • KSB 4006 for scorer (ø 200 mm) Condition & Service: • Condition: Overhauled & as new • Functionality: Fully operational • Warranty: 12 months Reliability in Continuous Operation: This machine is in use worldwide – even under extreme conditions. Whether in the dry climates of Africa or the humid environments of Southeast Asia (e.g., Thailand), the SCHEER FM 16 operates reliably in 3-shift systems – 365 days a year – and stands out for its superior precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electrical supplier components and wear parts.) Flexibility & Customization: We offer various models and equipment options – to fit every budget. We also realize custom tailored solutions based on your individual requirements. 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning and training optionally available.

Condition: used, Year of construction: 2025, Used Machine Year of manufacture: 2025 Condition: like new, delivered in December 2025 Features and Technical Specifications: - Solid worktable made of heavily ribbed gray cast iron for maximum stability and durability - Sturdy base frame made of welded steel—guarantees high torsional rigidity and vibration-free operation - Precision format sliding carriage made of anodized aluminum—smoothly guided by a high-quality ball-contact system - Carbide guideways—for lasting precision and minimal maintenance - Swiveling cast iron saw unit with dual segment guide - Exact zero-point swivel for maximum cutting accuracy - Solid rip fence with round bar guide - Equipped with a sliding eccentric clamping device - Integrated miter cutting device on the sliding carriage—for fast and precise miter cuts - Scoring unit with belt drive - Format sliding table length: 2600 mm - Trimming length: 2600 mm Chodpozk N Txjfx Ap Dsd - Format sliding table width: 360 mm - Table length: 940 mm - Table width: 560 mm - Cutting width with rip fence: 900 mm - Max. crosscut width to the left of the saw blade: 3200 mm - Saw blade tilt: 90–46° - Max. cutting height at 90°: 100 mm - Max. cutting height at 45°: 71 mm - Saw blade diameter: 315 mm - Speed: 4,000 rpm - Scoring blade diameter: 120 mm - Scoring blade speed: 9,000 rpm - Motor: 6 kW Weight: approx. 560 kg

Condition: new, Altendorf F 45 EvoDrive – new Exhibition machine, special price - Electrically powered height and swivel adjustment 0 – 46° for the - Control panel at eye level, swiveling - Machine height 91 cm - Template holder, directly on the control panel - Extended cutting height through swivel adjustment, max. blade diameter 550 mm - Motor 5.5 kW (7.5 hp) VARIO - Preparation for a 2-axis scoring saw - Table extension 840 mm - Double roller carriage with carriage length 3200 mm - Miter stop Cedozymblopfx Ap Dehd - CNC parallel fence 1300 mm - Front support roller Duplex is not included in the price but can be purchased at a favorable price.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 39/7053, cutting length (max.): 5,100 mm, saw blade diameter: 550 mm, total length: 5,350 mm, total width: 1,900 mm, total height: 1,550 mm, type of input current: three-phase, pivoting range: 45 °, input voltage: 400 V, air pressure: 6 bar, overall weight: 1,400 kg, space requirement height: 1,550 mm, space requirement length: 8,300 mm, space requirement width: 1,900 mm, We are offering this used Rapid DGL 250 double miter saw, manufactured in 2008. Manufacturer: Rapid Model: DGL 250 Year of manufacture: 2008 Condition: used Category ID: 1062 Type ID: 1498 Machine type: Double miter saw Cutting length: 5100 mm Control: PCE5000 Dimensions: L/W/H 5350/1420/1900 at a cutting length of 3700 mm Swivel range: 45 and 90 degrees Saw blade: 550 mm Feed: right Dust extraction system included Chjdsz Hy Hfepfx Ap Dod Currently still in use, due to new investment. Available from week 20. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, type of input current: three-phase, cutting height (max.): 120 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, actuation type: electric, Equipment: CE marking, saw blade guard, scorer, Efficient and precise cutting with high ease of operation thanks to the electromotive adjustment of the main saw blade (height/angle) and the parallel fence. Powerful motor, speed up to 5,000 rpm, scoring saw speed up to 8,000 rpm. Double roller carriage, the heart of the panel saw, smooth-running and durable. Cutting length max. 3,200 mm Safe operation thanks to proven safety devices. Equipment: Machine frame: Torsionally rigid and self-supporting guarantees the necessary smooth running and stability Codoz Dwftopfx Ap Dshd Control: PLC control Electromotive height adjustment and tilt 0-45° for the main and scoring saw blade via push and hold button. Saw unit: Powerful motors for excellent cutting performance Drive power/speed of the main saw spindle with automatic brake Main saw motor 7 kW, speed adjustment by switching over the drive belt, speeds 5,000 / 4,000 / 3,000 rpm Speed of the scoring saw 8,000 rpm Quick-change system for the main saw blade Saw blade angle is displayed numerically Double roller carriage: Linear, round guide rails ensure a precise and durable system with high-quality cutting results and a long service life Small rollers inside the carriage guarantee smooth sliding during cutting incl. upper carriage locking Carriage length 3,200 mm Parallel fence: max. width 1,250 mm with electromotive adjustment removable fence High-quality work table made of robust sheet steel guarantees high rigidity Safety zone starts approx. 200 mm in front of the saw blade Crosscut fence: Cross position of the panel is displayed numerically with telescopic device for cuts up to 3,100 mm and 90° guarantee Robust, gap-free flap units are easy to move Fence ruler is removable Cutting to length on the crosscut fence on the sliding carriage 3 digital displays with fine adjustment for high repeatability Display up to max. 3,200 mm Extraction: to prevent flying chips and dust protects the operator from hazards Table extension and table widening Design: Clamping shoe, sliding stick, sliding and return handle Miter stop for manual mounting on the sliding carriage Technical data: Main saw: Saw blade diameter 400 mm, speed 3,000/4,000/5,000 rpm, motor 7 kW S1 Scoring saw: Saw blade diameter 120 mm, speed 8,000 rpm, motor 0.75 kW S1 Saw blade tilt 0-45° Max. cutting depth at 45°: 85 mm Max. cutting depth at 90°: 125 mm Parallel fence: max. 1,250 mm Sliding carriage: 3,200 x 418 mm Max. cutting capacity: 3,200 mm Height adjustment: electromotive Angle adjustment: electromotive Table size: 1,020 (690+720) mm Extraction: Diameter 100 mm Space requirement: 6,700 x 3,900 x 1,890 mm CE marking in accordance with EU directives including documentation and maintenance instructions Saw blades are not included in the scope of delivery.

Condition: new, Panel saw ALTENDORF F 25, Type 6 -Exhibition machine- Double roller carriage, swiveling, manual height and swivel adjustment, parallel fence with manual fine adjustment, angle/miter fence, prepared for subsequent installation of a scoring unit ----- Technical data ----- Chjdou R S Hcspfx Ap Dsd Swivel range: 0 - 46 °, carriage length: 3,200 mm, cutting width: 1,000 mm, cutting height: 100 mm, max. saw blade diameter: 315 mm, max. saw blade overhang: 104 mm, Non-CE version: max. saw blade diameter: 350 mm, max. saw blade overhang: 121.5 mm, rip fence extendable up to: 3,450 mm, speeds: 4,200 rpm, motor power: 4.0 kW, 5.5 HP, work table height: 880 mm - large extraction hood is optional - - new exhibition machine -

Condition: new, Year of construction: 2023, machine/vehicle number: 23-04-35-001, F 25 Version 3 Manual height and swivel adjustment 0 - 46° of the saw blade with digital display. Motor 5.5 kW, 2 speeds 3,600 / 4,200 rpm. Double roller carriage 3200 mm, Parallel fence incl. fine adjustment and DIGIT X (digital display of the cutting width) Cutting width 1000 mm, Angle miter fence, cutting length up to 3450 mm, Basic scoring unit with LED light Saw blade diameter max 315 mm, saw blade projection max. 104 mm, Cutting height max. 100 mm, at 45° max. 70 mm, Large dust extraction hood (PSV), incl. option for front support roller, Csdpof A Ehtefx Ap Dohd immediately available from stock in Seevetal, subject to prior sale Ex works, excluding transport, assembly and instruction.

Condition: reconditioned (used), Year of construction: 2023, machine/vehicle number: GM010.0396, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, table length: 840 mm, Factory-refurbished Altendorf F45 with ProDrive control system! TECHNICAL DETAILS Cutting Data Cutting length: max. 3,200 mm Cutting width at rip fence: 1,300 mm Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm Carriage length, double roller carriage: 3,200 mm Table Data Table length: 840 mm Performance Data Power output: 5.5 kW MACHINE DETAILS Machine height: 910 mm Chjdpfx Apexc Uq Ho Dod Motor power: 5.5 kW (7.5 HP) Dust Extraction Connection Extraction, top: Ø = 80 mm Extraction, bottom: Ø = 120 mm Negative pressure: 1,200 Pa at total suction port, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Lighting Continuously variable speed control Scorer unit LED lighting 3-axis scorer including park position On/off switch on the double roller carriage Angle/miter fence Parallel stop DIGIT X 1,300 mm Front support roller Second support on the double roller carriage

Condition: good (used), Miter saw ZS 170 N, including machine stand, 3 m infeed roller conveyor with left-hand stop, and 2 m outfeed roller conveyor. Cedpfxj Aax Hds Ap Dshd

Condition: new, Year of construction: 2025, Panel Saw ALTENDORF F 35 Type 3 - 1000 with Scorer 7.5 kW (10 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle/miter fence Digit-L, Table extension/table width extension, Chodpfx Apjxyl Eco Dod With proven CDF surface ----- Technical Data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inch, Working table height: 910 mm, Extraction connection Ø: 80 + 120 mm Equipment: Altendorf F 35 Type: III - 1000 7.5 kW (10 HP) 3 speeds (M51064) Angle/miter fence Digit L option (M44154) Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Welcome to Maschinenhandel Knipfer We would be happy to arrange a viewing of the machines on our premises by appointment. We are not always on site, so please call or write to us in advance. ━━━━━ Made in the EU. New machine, top quality! - CE marking - 7.5 kW main motor - Scoring saw - Swiveling electrically - 45° - Height adjustment electrically - Max. cutting height: 155mm - Sliding carriage can be locked in various positions - Wide and narrow dust extraction hood, quick to change - Max. saw blade diameter: 350mm - Extendable table extension on the crosscut fence - Crosscut fence extendable up to 330cm - Edge trimming shoe - Clamping device - Miter gauge Cedemx R Efopfx Ap Dshd - Weight: 1100kg - Sliding carriage 320cm x 40cm - Cutting width at the parallel fence 125cm - Dust extraction port 120mm - Speed indicator ━━━━━ CONTACT & CONSULTATION ━━━━━ Your contact person: Johannes Knipfer Tel.: Gewerbegebiet Ost 25a 92353 Postbauer-Heng ━━━━━ IMPORTANT NOTE All information is subject to change without notice. Technical changes reserved by the manufacturers. Price changes, interim sales and printing errors reserved. Prices apply to collection. Shipping possible for an additional charge and by arrangement. Illustrations may show optional equipment that is not included in the price. A forklift is available for loading.

Condition: good (used), Year of construction: 2020, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, pivoting range: 45 °, actuation type: electric, table width: 780 mm, table length: 2,500 mm, overall weight: 660 kg, 5.5 kW, -45/+45° tiltable, electric height and swivel adjustment, left/right, 6 speeds, Aigner stop, 2 x 500 mm, digital display on the fence, Chsdpfx Apoykar Ho Djd table 2500 mm x 780 mm, mechanically programmable fence with two displays, system for quick removal from the work table, including Felder 3-roller feed system. New price: €18,700.00 Available approximately September 2026. Shipping possible for an additional charge!

Year of construction: 2008, condition: excellent (used), SAC CS40 Format Panel Saw year 2008 S/N 312029 Cutting length 3,200 mm Anodized aluminum sliding table 3200 x 420mm, locks for easy panel loading in any position steel gliding system Main saw arbor(30 mm) 45° tilting electric raise & lower of main blade. Main motor 5,5 kW, self-braking motor Chedpfx Aohwwlpop Ded utting speeds 2,600 - 4,000 and 5,600 rpm Blade diameter max 400 mm max cutting height 130 mm ( 90° ) 100 mm ( 45° ) rip fence 1,500 mm scoring saw motor 0,75 kW 120 mm (Dia. scoring blade - 8,000 RPM scoring unit w/external adjustment ) Square crosscut fence with stops, extension table with miter fence & sliding outrigger support. 400 V , 50 Hz weight 820 Kg CE ,marked

Condition: new, Year of construction: 2026, Altendorf F 35 - Type 1 Panel Saw Standard Technical Equipment • 15” Touchscreen (19:6) • Double sliding table 3,200 mm Csdpfxszylnqe Ap Dehd • Electrically adjustable tilting and height adjustment 0 - 46° of the main saw blade, max. 154 mm • Main drive with 3 speeds (3/4/5000 rpm) • Diameter of main saw blade 300 - 450 mm • Large protective hood - Scoring saw preparation - Double sliding table 3200 mm - Table extension 840 mm - Miter fence - Parallel fence 1000 mm Digit_X - 7.5 kW (10 hp) 3 speeds - Template holder, directly on the control panel - Front support roller

Condition: new, Year of construction: 2026, Panel Saw ALTENDORF F 35 Type 1 - 1000 Top for Solid Wood - New machine - immediately available from stock Bitburg - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large safety hood Double roller carriage, 3,200 mm Scoring unit-ready Rip fence, cutting width 1,000 mm Angle/miter fence 3,450 mm, without length compensation Table extension/widening: Powder-coated surface Saw blade tilting range: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade diameter: 450 mm Display size: 15 inch Working table height: 910 mm Chsdpfxoxyl Epe Ap Ded Extraction port diameter: 80 + 120 mm Options included: M45102 Rip fence 1000 mm Digit_X Location: ex-stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2011, We are offering this used Wegoma DS 130 BC miter saw, manufactured in 2011, for sale. Chjdpsz Ag Ecjfx Ap Dod The machine has been replaced in our facility with a new double miter saw with continuously adjustable swivel angles and has always functioned well up to now. Key specifications: • Type: DS 130 BC • Serial number: 09438 • Year of manufacture: 09/11 • Swivel angle: 45° (inward) and 90° (left and right saw heads independently) • Saw blades: d 500x4x80mm, Z=126 • Clamps: 2 vertical clamps, 4 horizontal clamps • Current application: Cutting aluminum extrusions (insect screen mesh) • X-axis: both saw heads move outward from the center • Cutting length: Maximum: 3600mm, Minimum: 300mm (with center stop) If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic scoring unit adjustment Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut stop with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Chodpeyftzkefx Ap Dod Scoring blade diameter mm: 120 Panel cutting size with extendable stop mm: 3200x3200 Swivel range degrees: 0° / +46° Max. cutting height at 90° mm: 150 Max. cutting height at +45° mm: 130 Saw blade rotation speed rpm: 2500, 3500, 5000 Scoring blade speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. The buyer is welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Condition: used, Year of construction: 2015, machine/vehicle number: 319 C1000075, cutting length (max.): 6,600 mm, saw blade diameter: 600 mm, For sale is a Schüco double miter saw PDG e-Cut600L, manufactured in 2015. The machine is designed for the precise cutting to length and miter cutting of profiles and features a version with a cutting length of 6,600 mm. With its two saw blades, each with a diameter of 600 mm, it is particularly suitable for professional use in profile and window manufacturing. The Schüco PDG e-Cut600L enables the cutting of profiles to defined lengths and processing with different miter angles. Technical data: Cjdez Spn Rspfx Ap Dshd • Version: 6.6 m • Motor: 230 / 400 V / 2 x 2.2 kW • Saw blade speed: 2800 rpm • Tilt angle: 20° (outward), 45° (inward) • Saw blade Ø: 2 x 600 mm • Cutting length (min.): 350 mm; 270 mm; (via software) • Cutting length (max.): 6600 mm

Condition: excellent (used), Year of construction: 2018, Premier Pallet Inverter / Pallet Turner Year 2018 Electrohydraulic operation Chodpfxewt S N Rs Ap Dsd Maximum opening 1875mm Minimum opening 1050mm Load capacity 2000kg Safety fencing included The FS 1900 Pallet Inverter Primary Uses: Invert boxes, bags, drums, pails, cans, glass vials, sheet steel and plastic, toilets, gas cylinders, super sacs and gaylords Handles almost any palletized load including slippery or unstable goods due to its high clamping pressure

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 241551, overall weight: 4,500 kg, The Ideal CSR102 CNC welding machine is in very good condition and ready for operation. It has been used very little. The electrodes operate in three axes. It has two rotary tables, each measuring 2100 x 1100 mm. It is located in a workshop, connected and ready for testing. It was purchased new in 2015. Cedo Adrimjpfx Ap Djhd It comes with technical documentation, both in paper and electronic format.