Used Mig for sale (392)

Condition: used, functionality: fully functional, The Selco NEOMIG 242 is a classic, extremely robust MIG/MAG welding machine from the Italian premium manufacturer Selco (which was acquired by voestalpine Böhler Welding several years ago). Unlike modern, fully digital inverter machines, this is a stepped, electromechanical transformer system. This means that it is considerably heavier and larger than a modern compact inverter, but it is considered practically indestructible in metalworking shops and workshops, with an enormous service life and a very stable arc. Technical data at a glance Feature Value / Specification Welding process MIG/MAG (gas-shielded welding) Connection voltage 400 V (3-phase / three-phase) Welding current range 30 – 240 A Duty cycle 30% at 240 A60% at 170 A100% at 131 A Voltage levels Multi-stage, manually adjustable Wire feed Integrated, mechanical roller feed Max. power consumption approx. 8.3 kW Cooling Typically gas-cooled (standard hose package) Important features & practical advantages Classic transformer technology: Since no sensitive electronics are installed in the power unit, the NEOMIG 242 tolerates dust, metal grinding dirt and moisture much better than modern inverters. It also operates absolutely reliably under harsh conditions in the workshop or on-site. Excellent welding properties: Selco was known in the industry for its perfectly matched copper transformers and chokes. The system provides a very spatter-free, smooth and even arc in steel, stainless steel and also in thinner aluminum applications. Intuitive operation without unnecessary features: No complicated digital menus. You select the appropriate welding level, adjust the wire speed on the potentiometer and can start immediately. Using toggle switches, modes such as 2-cycle / 4-cycle (for long seams) as well as spot and interval welding can also be activated. Used market assessment: Since this series is no longer produced new, it is a real insider tip on the used market for workshops and ambitious DIY enthusiasts. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law. Dwedpfx Aaezd S Rye Iec

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Dodpfxew Rm Sas Aa Ijwc Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: ready for operation (used), functionality: fully functional, The Wolfking TSMIG 850 grinder-mixer is a versatile machine designed to meet the needs of the meat processing industry. Thanks to its dual grinding and mixing function, it ensures homogeneous and consistent processing, even at low temperatures. Indeed, this grinder is equipped with robust paddles that ensure optimal distribution of the ingredients, resulting in a perfect texture for each production batch. Furthermore, this machine is ideal for companies looking to maximize their output and improve the efficiency of their production line. With its robustness and ease of maintenance, the grinder-mixer easily integrates into demanding industrial environments while ensuring high long-term reliability. In summary, the Wolfking TSMIG 850 is an essential choice for professionals seeking to optimize their meat production processes, while ensuring better management of raw materials and increased productivity. Specifications: TSMIG 850/225 Mixer Paddle mixer Djdezqdw Sjpfx Aa Ijwc Weight: 1800 kg Power: 41 kW Amperage: 71 A Voltage: 3*400 V Frequency: 50 Hz Dimensions (L x W x H): 1900 x 1900 x 2650 mm IP.65 5XWFPSKX

Condition: used, twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley Dwodpfx Aaozxdrre Ioc all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid

Condition: used, MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package -MIG/MAG hose package: Intermediate hose package for welding robots -Length: 6.0 m -Connector: 16-pin Dwodpfx Aaet U Tras Ioc -water cooled -Transport dimensions: Ø 560 x 120 mm -Weight: 9.8 kg

Condition: used, MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package -MIG/MAG hose package: Intermediate hose package for welding robots -Length: 6.0 m -Connector: 16-pin -water cooled Dodpfx Aot U Trgoa Iswc -Transport dimensions: Ø 600 x 130 mm -Weight: 10,9 kg

Condition: excellent (used), Year of construction: 2011, volume flow: 1.98 m³/h, operating pressure: 10 bar, pressure: 13 bar, ALMIG BELT 15 screw compressor 15 kW motor Capacity: 1.98 m³/min Dwsdewxzf Sspfx Aa Iec Pressure: 10 bar Year of production: 2011

Condition: excellent (used), Year of construction: 2021, volume flow: 1.07 m³/h, operating pressure: 10 bar, pressure: 10 bar, Screw compressor ALMIG BELT 7 Motor 7.5 kW Capacity 1.07 m3/min, Djdpfowxzgiex Aa Ijwc Pressure 10 bar Year of manufacture 2021

Year of construction: 2002, condition: used, functionality: fully functional, For sale are 2 used dispensing/roller conveying systems from the manufacturer Springer. These high-performance systems are designed for a maximum material length of up to 6 meters and achieve a throughput of up to 120 cycles per minute. Ideal for efficient and precise dispensing of wood or other materials in high-volume production. The dispensing systems are ready for use (disassembled). Price upon request. Dwjdpszudzlefx Aa Ijc

Condition: used, Year of construction: 2006, Technical details: workpiece weight: 1,1 t control: RobAssist über makro-Technik / VME-Bus-CPU Rotary-table: Ø 800 mm rotary table tiltable: 370° Grad table - tiltable: 115° Grad total power requirement: 35 kVA Total weight, approx.: 4000 kg dimensions L x W x H: Roboter: ca. 2,5 x 4,5 x 3,8 m dimensions electric cabinet: ca. 600 x 800 x x2200 mm dimensions L x W x H: Absaufanlage: ca. 0,7 x 0,8 x 2,7 m dimensions L x W x H: Drehmodul: ca. 1,4 x 1,4 x 1,1 m The system is currently in the technical department. Welding robot system consists of: -Gantry with robot: Reis Robotics, RVL20-16.3 kVA, stroke radius max. approx. 1600 mm, speeds = axis 1: 3 m/sec, axis 2: 185°/sec. Axis 3: 150° / sec., axis 4: 450° / sec., axis 5: 450° / sec., axis 6: 500° / sec, -2x columns: Column spacing 3300 mm, columns on base plate 900x900mm; columns Ø 350 mm -Turntable/tilt and turn module: Model RIS, type RDK11 Torque max. tilting axis = 4,200 Nm and turning axis 2,200 Nm Speed of tilting axis = 19° / sec. and turning axis 45° / sec. Dedpevzq Hrofx Aa Ijwc -Welding unit: Fronius, type TPS 2700; welding current range: MIG/MAG 3-270 A and electrode 10-270 A as well as TIG = 3-270 A; protection class IP 23 -Welding fume extraction: Teka, type DUST Buster DB-302 R, air volume flow max. 300m³/h, filter class Kategori C, filter area 2.2 m² -Cooling unit: Type FK 4000 R, power 2 kW, protection class IP 23, pressure 4 bar Equipment: -safety light barrier with transmitter and receiver Hand-held programming device *

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMN, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 3680 with HotKnife (NearLine, Generation 1) Showroom Machine, Manufactured 2025 Specifications: Min. paper format: 200 x 250 mm Paper weight: 115 x 600 g/ m2 Thickness of sheets max. 0,7 mm: Overlap > 0 Thickness of sheets max. 1,4 mm: Overlap < 0 Suitable kinds of film: Polypropylene, Polyester, Nylon Film thickness: 24-50 μm Inner diameter of film reel: 3“ = 76,2 mm Outer diameter of film reel: 350 mm Output / laminating speed: 3-25 m/min(regard. technological conditions) Maximum output: - Average monthly capacity of machine: 100 000 B2 sheets Max. paper pile: 60 mm / length of sheet < 350 mm 30 mm / length of sheet > 350 mm Max. feeding table load: 20 kg Laminating temperature: according film manufacturer – max. 135°C Sheet overlap tolerance: ±1 mm Max. pressing force (0,6MPa): 15 kN Max. pressing force (0,8MPa): 19,5 kN (WARNING = limited life of the pressure roller) Max. linear NIP pressure, press 0,6 MPa: 60 N/mm / sheet width 250 mm 50 N/mm / sheet width 300 mm 41,6 N/mm / sheet width 360 mm Linear NIP pressure= 30 N/mm: sheet width 250 mm / 0,30 MPa sheet width 300 mm / 0,36 MPa sheet width 360 mm / 0,43 MPa Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Dwjdpozh S Ugofx Aa Ioc Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: used, Year of construction: 2006, Technical details: power consumption: 30 / 15,5 350 / 31,5 A welding current: Gleichstrom V open-circuit voltage: 15,5 - 41,0 V total power requirement: 16 kVA kw weight of the machine approx.: 125 kg dimensions of machine: L: 1,05 x B: 0,5 x H: 0,70 m Compact welding machine - Welding rectifier with integrated wire feeder -MIG MAG -Connected load 9.7 kVA Dwodpfx Aaeu Nwgfj Ijc -2-stroke; 4-stroke; spot; interval -Cooling type AF -Protection class IP 23 -Insulation class H -Welding torch and earth cable *

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding torch Dedpfex Nn Rpox Aa Iowc -MIG/MAG hose assembly: Gas-cooled -Length: 4.7 m -Type: DIX MS 330-4 SA -Transport dimensions: 400/480/H100 mm -Weight: 4.2 kg

Condition: used, MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction Dwjdpfxjt U Trto Aa Ijc -MIG/MAG hose package: with welding fume extraction -Length: 4.35 m -water cooled -Transport dimensions: 640/540/H120 mm -Weight: 4.8 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding torch Dwsdpjx Rwa Asfx Aa Iec -MIG/MAG hose package: water-cooled -Length: 3.5 m -Transport dimensions: 400/360/H80 mm -Weight: 3.5 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.5 m -Transport dimensions: 420/380/H80 mm Dsdjx Rwbgepfx Aa Iswc -Weight: 4.4 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding torch Dwodpfox Rwdnex Aa Isc -MIG/MAG hose assembly: Gas-cooled -Length: 3.5 m -Transport dimensions: 430/360/H85 mm -Weight: 3.2 kg

Condition: new, functionality: fully functional, Lorch Cobot Welding World – flexible welding automation for small and medium-sized businesses Doderuml Sjpfx Aa Iewc Automate economically, produce more efficiently: The Lorch Cobot Welding World offers a simple and cost-effective entry point into collaborative robotic welding. The modular complete solutions are particularly suitable for small and medium-sized series, changing components, and recurring welding tasks. The welder remains responsible for the process, while the cobot executes programmed sequences precisely and reproducibly. This relieves employees from monotonous and physically demanding tasks, while productivity, process reliability, and welding quality increase. Compared to classic industrial robot solutions, the cobot concept offers greater flexibility and comparatively low investment costs. Individually configurable product portfolio: With the myCobot system, the system can be assembled to suit the respective manufacturing task. Solutions for MIG-MAG and TIG welding, powerful Lorch power sources, coordinated cobot torch systems, and the UR12e from Universal Robots are available. The intelligent Lorch Cobotronic software enables intuitive programming and user-friendly operation – also ideal for companies without extensive robotics expertise. The portfolio includes, among other things: - Lorch IQS for state-of-the-art MIG-MAG welding with the highest weld seam quality, innovative technology, and maximum process performance - Lorch S-RoboMIG XT for economical MIG-MAG welding with high reliability and excellent quality - V-RoboTIG for precise and visually high-quality TIG welds - Linear axis Cobot Move for expanding the work area - Rotary tilting table Cobot Turn 100 A for optimal positioning and rotation of workpieces - Cobot SeamPilot for automatic detection and tracking of the weld seam path - Functions such as SmartCopy, TouchSense, SeamTracking, weaving, and AVC Complete solution including service: Lorch and qualified cobot partners support the project holistically – from application consulting and configuration to assembly, installation, and commissioning, as well as operator training. The solution is ideal for metal construction, mechanical engineering, contract manufacturing, and industrial production companies that want to increase their capacity, relieve skilled workers, and achieve consistently high-quality welding results. Flexible financing, efficient automation: In addition, financing, leasing, and rental models are available so that users can benefit from a practical, quickly integrable, and future-proof automation solution with flexible financing options. New – Cobot generation UR8L – more reach and flexibility: With the UR8L, Lorch expands the Cobot Welding World to include a powerful welding robot for larger and longer components. Its reach of 1,750 mm, a payload capacity of 8 kg, and the compact wrist enable excellent accessibility – even for demanding workpiece geometries and confined working areas. Doc 1: Cobot brochure (DE) Doc 2: Cobot brochure (EN) Doc 3: Technical details MIG/MAG Cobot (DE) Doc 4: Technical details MIG/MAG Cobot (EN) Doc 5: Technical details TIG Cobot (DE) Doc 6: Technical details TIG Cobot (EN)

Condition: new, welding current max. 250 A Dwsdpfey Aa Itex Aa Ioc open-circuit voltage max. 66 Volt connected load frequency 400 V weight 65 kg Dimensions (LxWxH) 900 x 500 x 750 mm MIG/MAG gas-shielded welding machine: incl. 3m hose package.

Condition: used, MIG/MAG hose package for robots Djdpsfdd A Dofx Aa Iowc -Hose package with: wire feed for robots or automatic welding machines -Length: 3.4 m -Water cooled -Weight: 5.5 kg

Condition: used, MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.2 m -water cooled Dwsdpfet U Trmjx Aa Iec -Transport dimensions: 600/500/H120 mm -Weight: 4.6 kg

Condition: used, MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction Dodot U Tryepfx Aa Ijwc -MIG/MAG hose package: with welding fume extraction -Length: 4.25 m -water cooled -Transport dimensions: 600/500/H130 mm -Weight: 4.8 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding torch Dwjdpfx Aaox Rwcwj Ijc -MIG/MAG hose package: water-cooled -Length: 4.4 m -Transport dimensions: 430/400/H100 mm -Weight: 3.5 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose assembly: Gas-cooled -Length: 3.9 m -Dimensions: 450/450/H90 mm -Weight: 3.2 kg Dwedpfx Aeutur Sea Ijc

Condition: good (used), MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: gas-cooled Djdpfx Aeucmm Esa Iewc -Length: 4.7 m -Transport dimensions: 500/470/H70 mm -Weight: 3,9 kg