Used Metal Spinning Machine for sale (66,513)

Condition: good (used), Year of construction: 2011, Edging and contouring - deburring machine Guedpfxownpflo Ad Rsi ROLEI Type: 00645-KKE2 Year: 2011.

Condition: excellent (used), functionality: fully functional, Timesavers Series 22-1050-WMDMD The Series 22-1050-WMDMD, with a working width of 1050 mm and a table opening of 0.8-100 mm, is ideally suited for processing laser-cut, stamped, water jet-cut, or plasma-cut parts, thanks to its 3 stations. Gsdpfsznlxrjx Ad Reui The belt grinding station allows for the removal of burrs and protruding edges. Subsequently, the edge burrs are removed and the edges are slightly rounded using the disc brushes. To achieve a uniform result, we have incorporated two oscillating brush stations in which the disc brushes rotate alternately to the left and right. Thanks to the quick-change system for belts and brushes, the machine can be reconfigured in just a few steps. The conveyor belt, as well as all other stations, are frequency-controlled, allowing for stepless speed adjustment.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, working width: 1,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, total length: 2,210 mm, total width: 1,530 mm, total height: 1,940 mm, overall weight: 1,200 kg, input voltage: 400 V, workpiece height (max.): 50 mm, power: 6 kW (8.16 HP), input current: 18 A, Edge rounding up to 1100mm width. Gusdpjtzfntefx Ad Roi Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both the outer and inner contours of stainless steel, steel or aluminum parts that have been cut in either a laser, shearing or punching machine. This machine processes parts of various dimensions, including products as small as 50x50mm. The DM1100 C has a station with double cross belts for edge rounding and leaves clean, smooth and burr-free edges on the complete parts. DM1100 C Working capacity (mm) 1100x50 No. of cross belt stations 1 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Cross conveyor motor (kW) (2x) 3 Feed motor (kW) 0.18 Total power (kW) 6 Power consumption (A) 18 Rod suction connection per head (Ø mm) 150 Dimensions (mm) 2213x1530x1940 Weight (kg) 1200

Condition: good (used), Year of construction: 2021, functionality: fully functional, Workpiece width – max. 780 mm Workpiece height – max. 120 mm Gusdpfx Adj Agrgvo Rji Workpiece dimensions – min. 20x20 mm Total power requirement 6 kW Machine weight approx. 445 kg Space requirement approx. 1500x1100x1550 mm

Year of construction: 2026, condition: new, functionality: fully functional, power: 1,500 kW (2,039.43 HP), overall weight: 2,000 kg, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, documentation/manual, This laser metal cutting machine can operate sheet material with a thickness of 3-4 mm. Wattsan 1530 can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It features a working space of 1500x3000 mm. The loading rollers of the precise Wattsan 1530 E make material feeding easier. The E-series laser metal machine has a maximum travel speed of 80 meters per minute. Laser power can be up to 1,5 kw. The bed here is made of steel. You can give our managers a call for additional details! Wattsan 1530 E characteristics Working area: 1500x3000 mm Laser power: up to 1500 W Weight: 1900 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Gsdpfsiicwljx Ad Rjui Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2026, condition: new, functionality: fully functional, power: 1,500 kW (2,039.43 HP), overall weight: 1,800 kg, table length: 2,500 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, This laser metal cutting machine can operate sheet material with a thickness of 3-4 mm. Wattsan 1325 can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It features a working space of 1300x2500 mm. The loading rollers of the precise Wattsan 13250 E make material feeding easier. The E-series laser metal machine has a maximum travel speed of 80 meters per minute. Laser power can be up to 1,5 kw. The bed here is made of steel. You can give our managers a call for additional details! Gusdpfx Adeiicw Eo Rei Wattsan 1325 E characteristics Working area: 1300x2500 mm Laser power: up to 1500 W Weight: 1620 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2026, condition: new, functionality: fully functional, power: 6,000 kW (8,157.72 HP), overall weight: 2,000 kg, table length: 2,500 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, This laser metal cutting machine can operate sheet material with a thickness up to 12 mm. Wattsan 1235 can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It features a working space of 1300x2500 mm. The loading rollers of the precise Wattsan 1325 S make material feeding easier. The S-series laser metal machine has a maximum travel speed of 120 meters per minute. Laser power can be up to 6 kw. The bed here is made of steel. You can give our managers a call for additional details! Wattsan characteristics Working area: 1300x2500 mm Laser power: up to 6000 W Weight: 1640 Guodpfsiicwzsx Ad Rsi Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, total width: 900 mm, total length: 2,050 mm, total height: 2,100 mm, Year of manufacture: 1956 Colour: Green Empty weight: 2.400 kg Godpjz R Dt Eofx Ad Reui - Year: 1956 - Serial number: 3706 - Drive system: Conventional - Drive system: Gear drive - Number of drills [pcs]: 4 - Power [kW]: 6 - Table type: Fixed table - Table length [mm]: 1800 - Table width [mm]: 350 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 25 - Reach [mm]: 275 - Main spindle power [kW]: 6.0 - Min. spindle speed [rpm]: 180 - Max. spindle speed [rpm]: 2000 - Options: Tapping function - Transport dimensions: 2050mm x 900mm x 2100mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2026, condition: new, functionality: fully functional, power: 6,000 kW (8,157.72 HP), overall weight: 4,800 kg, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, documentation/manual, Efficiency, multifunction, and safety — this laser metal cutter is a combination of three. It's time to enhance your production efficiency by 1.5 times! Wattsan 1530 can handle stainless steel, carbon steel, galvanized steel, copper, aluminium, and titanium. This CNC laser cutter for metal has two working tables that measure 1500x3000 mm, which can replace each other. The standard equipment set includes a 6-meter-long pipe-cutting module and the cabin, which protects the operator from reflected radiation and sparks during cutting. You can give our managers a call for additional details! Wattsan characteristics Working area: 1500x3000 mm Laser power: up to 6000 W Weight: 5500 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Gujdpfoiicxfsx Ad Roi Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 600 mm, sheet thickness (max.): 120 mm, workpiece height (max.): 120 mm, grinding width: 800 mm, The grinding and deburring machine offers an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent processing by rounding the edges of the parts and removing burrs, resulting in a significantly improved surface quality. Using the latest technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. The user-friendliness combined with a robust design enables smooth integration into your production processes. With our grinding and deburring machine, you not only optimize processing times, but also increase the precision and durability of your products. Benefit from high-quality processing and increase your production efficiency. Gedpfx Adswzv E Ee Rsui

Condition: used, Year of construction: 2009, machine/vehicle number: 10000850, Item No. 21166 Hydro-pneumatic metal circular sawing machine Technical data: - Saw blade diameter up to 350 mm - Saw blade feed, continuously adjustable, hydro-pneumatic - Maximum opening width of the pneumatic vise 205 mm - Cutting range: - with saw blade diameter 350 mm - at 90°: - round 120 mm - square 110 mm - flat up to 200 x 90 mm - or 140 x 110 mm Gedpozzpp Isfx Ad Rsui - at 45°: - round 100 mm - flat 100 x 100 mm - Miter adjustable: - left up to 45° - right up to 45° - 30° - 4 saw blade speeds 10 + 20 + 40 + 80 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro-spray cooling system - Discharge conveyor with stop 4000 mm - Infeed conveyor 2000 mm - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

Year of construction: 1989, condition: not inspected (used), machine/vehicle number: 117-0690-7892 Messemodell, Brief Description: Gujdpfsw Rldzox Ad Roi - 2x12 spinning positions - SE9 boxes - Corolab - 1 start-up trolley - SRZ (precision winding) - Machine documentation available Last Use (Jan. 2024): - Application-specific product testing of polyester fibers - 0.9 - 1.7 dtex, 32-38 mm cut length - Approx. 45kg/sample to assess running behavior under constant machine settings - Mainly in Nm34, Nm50 - Untested, only for spare parts use! The machine has been dismantled and stored, but can be inspected on site. Pick-up only by buyer in 14727 Premnitz, no shipping. If interested, we look forward to your offer. Written inquiries only, please.

Condition: new, Year of construction: 2026, MBSM 150-20 For grinding surfaces, edges, and for rounding High-torque motors with vibration-free operation to achieve the best grinding results Working height adjustable by stepless tilting of the grinding unit Workpiece support adjustable in angle Continuous flat grinding surface allows grinding of even long workpieces One dust extraction port each on the spark guard and on the rear band roller Protective cover can be folded away Quick belt change in seconds thanks to the quick-release system Gjdpshk Df Djfx Ad Reui Simple adjustment of the belt path via adjusting screw Motor with brake and safety switch Dimensions and weights Length approx. 527 mm Width/Depth approx. 995 mm Height approx. 1025 mm Weight approx. 114 kg Dust extraction Nominal size of dust extraction port, external 60 mm Electrical data Connection voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idle, without dust extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Grinding belt length 2000 mm Grinding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Godpfsxtaxwsx Ad Roui Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, STC-Ref:G-022-7715 Heidelberg Plattenabkante // Platebender, Year: 2008 Gsdpfx Aozcuzyjd Rjui equipped: - suitable for Heidelberg SM / CD - Plate bender --> available: immediately, in stock

Condition: new, Year of construction: 2026, working width: 4,200 mm, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, sheet thickness copper (max.): 1 mm, back gauge: 1,320 mm, overall weight: 1,000 kg, total length: 4,500 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, foot remote control, Electric press brake RED-4200/0.8/150* with foot pedal and backstop. New electric precision sheet metal bending machine for 0.8 mm steel and 1 mm aluminum sheets. The main features of this sheet metal processing machine are its efficiency and precision. The bending machine enables bending operations with a maximum angle of 150 degrees. Electric control: A user-friendly control panel increases ease of use and the precision of repeatable bends. Roller shear: Enables cutting across the entire working width. Robust construction: The 18 mm thick bending beam ensures durability, while the 80 mm opening and the three-stage stroke adjustment of the upper beam facilitate material positioning. Machine equipment: Gsdpfxjc I T Rxj Ad Rsui electric control: upper and lower beam Foot pedal for control Electric backstop up to 1320 mm Control panel Additional equipment: Roller shear up to 1 mm steel sheet / 1.5 mm aluminum - 500 euros Manual folding machine - 100 euros Magnetic alignment aid, 2 pcs, 36 cm - 100 euros Shipping throughout Germany: 500 euros Invoice will be issued without VAT as an intra-community supply.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 109884, Offer 26167 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90°: - Round 130 mm - Square 120 mm - Rectangular 300 x 40 mm - or 240 x 85 mm - Cutting range at 45°: - Round 130 mm - Square 110 mm Godpfx Adezibmbo Rsui - Rectangular 245 x 40 mm - Miter adjustable left and right, each 0 - 90° - 2 cutting speeds: 13 + 26 m/min - Drive: 400 V / 1.2 / 1.8 kW - Feed rate of the saw blade, hydraulically continuously adjustable - Vertical material clamping - Coolant system - Space requirement: approx. W 800 x H 1850 x D 1100 mm - Weight: approx. 850 kg - Infeed – roller conveyor with storage area: 4000 mm - Outfeed – roller conveyor with measuring stop: 4000 mm

Condition: new, functionality: limited functionality, Year of construction: 2025, control type: manual, Equipment: CE marking, documentation/manual, OMEC 4-Roller Mechanical Symmetric Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand new, CE certified. Made in Italy. Double pinch. Top and bottom rollers powered with equal torque. Side rollers motorized for upward/downward movement. Front-opening top roller. Special bearings for side rollers. External lever to control roller inclination. Sheet clamping with bearing-actuated device. Two-pedal foot control. Electrical panel compliant with CE standards. Millimeter indicator for sheet clamping position. Standard equipment included with the plate rolling machine: - Frontal conical device on top roller. - No. 2 digital displays for the side roller positions. - No. 1 digital display for the motorized sheet clamping. - Grinding/Turning of rollers after hardening treatment. - Roller hardening. - Side sheet loading table with sheet centering stops, marked in mm. Gusdpfx Adey E Schj Rei Working length: 1530 mm. Top and bottom roller diameter: 90 mm. Side roller diameter: 95 mm. Plate thickness: 1.5 – 2 – 2.5 mm. (1.5 x D / 3 x D / 5 x D). Roller hardness: 55/60 HRC, 2 mm case depth. Installed power: 1.8 kW. Dimensions: 2290 x 750 x h 1150 mm. Weight: 690 kg.

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,100 mm, type of input current: three-phase, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness copper (max.): 50 mm, sheet thickness brass (max.): 50 mm, total length: 2,000 mm, total width: 2,590 mm, total height: 2,150 mm, overall weight: 2,500 kg, input voltage: 400 V, warranty duration: 12 months, table width: 1,100 mm, workpiece height (max.): 50 mm, power: 13 kW (17.68 HP), workpiece width (max.): 1,100 mm, pass-through width: 1,100 mm, DM1100 2C Gusdpfxsyiyhle Ad Rsi Working capacity (mm): 1100×50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2-8 Feed speed (m/s): 0.6-3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13 Current consumption (A): 30 Dust extraction port per head (Ø mm): 220 Dimensions (mm): 2000X2590x2150 Weight (kg): 2470

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support Gujdpeif Sg Sjfx Ad Rji - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: excellent (used), functionality: fully functional, TOYOSK 01C 550II-TMS Fixed 48 Multi spindle Machine Manufacturer: TOYOSK Gedswcp Enepfx Ad Rsui Type: 01C 550II-TMS Spindle diameter min.: M4x8 Spindle diameter max.: M4x15 Table size: 280x360mm Spindle speed: 430, 710, 1030 Power: 1.5kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings) If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Gjdpfxswa Uwdj Ad Roui Pulse welding unit with inverter welding power source Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition

Condition: new, Year of construction: 2026, Custom-Made Machines Tailored to Your Production Needs. Our custom-made machines are meticulously designed and engineered to meet the unique demands of your production processes. Whether your focus is finishing, oxide removal, or radius edge rounding, these machines deliver outstanding precision and performance. -Finishing: Achieve smooth, high-quality finishes on a wide range of materials, ensuring a consistently professional, polished appearance. -Oxide Removal: Effectively eliminate surface oxides to provide a clean, contaminant-free surface—essential for further processing or coating applications. -Radius Edge Rounding: Guodpfohq Dbxox Ad Rei Precisely round edges to your specified radius, enhancing both safety and the overall quality of your finished products. -Customization Options Each machine is tailored specifically to your requirements, offering flexibility in: Processing Speeds: Adjustable to match your varying production demands. Special Features: Options include dust and fume extraction systems, adjustable pressure settings, and programmable configurations designed to optimize your workflow. Built for Durability.. Constructed with longevity in mind, our custom machines are built to perform reliably through extended production cycles. Whether for small-scale projects or high-volume industrial applications, these machines provide exceptional results, year after year.

Condition: as good as new (ex-display), functionality: fully functional, Timesavers Series 10 The Series 10 features a pivoting head and a side for quick abrasive wheel changes. We use this side to remove spatter and high burrs. The second side has a mount for a flap brush, which is used for edge rounding and finishing. Due to the various tool options, the Series 10 is a true all-rounder and is suitable for deburring, edge rounding, finish sanding, and removing heavy scale. The 180° rotatable head allows for quick and easy tool changes. Guedpfx Adjznlyvs Roi The machine is equipped with a vacuum system, and the motor speed is continuously adjustable. The machine is extremely flexible, comes with rollers for easy movement, and its simple operation makes it a user-friendly machine that is accessible to everyone.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,000 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,230 mm, total width: 1,600 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 2,200 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, table length: 2,000 mm, table width: 1,000 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,000 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,000 mm, height adjustment type: mechanical, input current: 39 A, number of spindles: 9, pass-through width: 1,000 mm, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are pleased to offer our premium deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable company with extensive experience in the production of metalworking and woodworking machinery. With decades of expertise and innovation, Madora is recognized for delivering robust, efficient, and operator-friendly solutions tailored to the needs of industrial clients throughout Europe. Our machines are engineered for precision, performance, and long-term reliability – all at competitive prices. The GP 1000 2Z is an outstanding, versatile deburring machine designed for cleaning sheet metal after various cutting processes. This model is fitted with two ‘Z’-type oscillating and rotating heads. What does this mean in practice? It allows for two operations to be performed simultaneously: not only does it efficiently remove scale after plasma cutting, but it also deburrs and rounds off the edges of workpieces following laser cutting. The broad range of working thicknesses and widths of up to 1,000 mm make it possible to process both small and large components. Guedpfx Adewztn Do Rei With suitable tooling, the machine is also capable of heavy edge rounding and oxide removal. The GP 1000 2Z deburring machine features a TFT touch-screen control panel, enabling the operator to continuously and precisely manage machining parameters such as workpiece height, feed rate, and tool rotation speed.