Used Metal Rolladen Maschine for sale (36,120)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Dwodpfozizkyex Ac Usb Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Kingsland Compact 40 Metal Working Machine, Punching Cap 20 x 15 & 38 x 8, Shearing Cap 200 x 13 & 350 x 6, Angle Cutting 90 deg, 80 x 80 x 8, 45 deg 50 x 50 x 6, Section Cutting 30 Ø, 25 Sq, 75 x 38 Section. S/No. 400 150 03, Includes Various Punches etc. in Cabinet. Country of Origin: United Kingdom Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Dwodpfx Aszn Uyfec Uob

Condition: ready for operation (used), functionality: limited functionality, Year of construction: 2021, laser source model: HF, laser power: 80 W, table length: 1,000 mm, table width: 600 mm, workpiece height (max.): 230 mm, resolution (max.): 1,000 dpi, No minimum price – guaranteed sale to the highest bidder! Suitable for professional engraving and cutting of various materials such as wood, acrylic, glass, plastic, and metal! TECHNICAL DETAILS Laser power: 80 W Laser source: Synrad HF-CO₂ laser source Dwjdpszx Dz Hofx Ac Usb Table size/working area: 1,000 x 600 mm Maximum workpiece height: 230 mm Maximum resolution: 1,000 dpi Maximum cutting speed: 3,200 mm/s MACHINE DETAILS Power supply: 230 V Dimensions & Weight Machine dimensions (L x W x H): 1,480 x 900 x 1,120 mm Machine weight: 300 kg EQUIPMENT Microsonic autofocus sensor for automatic distance detection and precise focusing LED interior lighting Rotary engraving device for cylindrical workpieces External extraction system Durable Synrad CO₂ laser source

Condition: good (used), functionality: fully functional, Year of construction: 2013, Used swivel bending machine by Schroder Dsdpfx Asyhdz Tsc Uowb Model: SPB Evo 3200 4.0 UD Capacity: 3200 x 4 mm Upward and downward bending Year of manufacture: 2013 POS 3000 CNC control (graphical) Hydraulic upper clamping CNC backgauge with 4 finger types (standard, clamping, side clamping) Additional lower blade

Condition: used, Year of construction: 2006, turning length: 1,298 mm, turning diameter: 356 mm, spindle speed (max.): 4,000 rpm, controller model: MORI SEIKI MSX 850III / MAPPS III, center width: 1,250 mm, TECHNICAL DETAILS Maximum turning diameter: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swinging diameter over bed: 923 mm X-axis travel: 260 mm Z-axis travel: 1,345 mm Maximum spindle speed: 4,000 rpm Spindle bore: approx. 80 mm Number of turrets: 1 Number of tool positions: 12 Dwedpezwgqujfx Ac Uob MACHINE DETAILS Control system: MORI SEIKI MSX 850III / MAPPS III Dimensions & Weight Dimensions (L x W x H): 5,000 × 2,300 × 2,400 mm Machine weight: 7,600 kg EQUIPMENT IRCO SIMAG loader magazine Chip conveyor Powered tools C-axis Y-axis

Condition: used, Year of construction: 2013, total length: 5,100 mm, total width: 1,800 mm, total height: 1,950 mm, Colour: White Empty weight: 7.500 kg Price: On request - Year: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 40032 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 445 - Swing over bed [mm]: 890 - Carriage turning diameter [mm]: 490 - Distance between centres [mm]: 3000 - Bed width [mm]: 700 Dwedpfxsznmlgo Ac Ujb - Spindle bore [mm]: 155 - Min. spindle speed [rpm]: 3.7 - Max. spindle speed [rpm]: 1000 - Max. workpiece weight [kg]: 5000 - Options: Three-jaw chuck, Removable bed, Fixed steady, Quick-change tool post, Digital readout - Swing over removable bed [mm]: 1060 - Type of digital readout: Fagor - Transport dimensions: 5100mm x 1800mm x 1950mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, Dedpfx Acjzzyt Ds Ujwb and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,350 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 39 m/min, feed rate Y-axis: 39 m/min, feed rate Z-axis: 39 m/min, workpiece weight (max.): 2,500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 35 W, number of spindles: 1, number of slots in tool magazine: 50, Equipment: chip conveyor, documentation/manual, We offer this Hurco BX50i vertical machining center in very good condition, manufactured in 2020. It was first put into service in 2021. Model: BX50i Work table surface 1500 x 960 mm T-slots 6 x 22 mm Maximum permissible uniformly distributed loads 2500 kg Dodpozzlu Tofx Ac Uowb Door opening 1100 mm Distance between the 2 columns 1060 mm Distance from spindle nose to table min/max 180/780 mm Spindle speed: 0 – 18000 rpm Hybrid spindle bearings Bearing lubrication: Grease/air Spindle taper: HSK63 FORM A Peak power (for 1 min) Continuous 47 HP - 35 kW at 2800 rpm 33.5 - 25 kW at 2800 rpm Maximum speed: 18,000 rpm Number of tools: 50 Center spindle coolant: 40 bar KNOLL paper filtration If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: good (used), Thalmann Pico 1mm steel - 1.75mm aluminum The machine was recently inspected and adjusted by a professional. It is in perfect working order and ready for immediate use. It bends all angles precisely up to a length of 6 meters. The shears are sharp and cut electrically. The control is simple and includes a foot pedal. Testing under power is possible – a forklift is available on site. The machine is privately owned and is being offered here as a friendly service (facilitated sale). Dedpfx Aozyzz Tjc Uswb Private sale – near Heilbronn.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, overall weight: 7,500 kg, grinding diameter: 300 mm, controller model: Siemens Sinumerik 840D Solutionline, No minimum price – guaranteed sale to the highest bidder! The control system was upgraded to a Siemens Sinumerik 840D Solutionline in 2014. The new control system was overhauled in 2016! TECHNICAL DETAILS Spindle speed range: 170–18,000 rpm Grinding diameter: 20–300 mm Swinging diameter: 350 mm (500 mm) Workpiece length: 300 mm (1,300 mm) Recommended grinding depth: up to 300 mm Center height above the workpiece table: 200 mm (300 mm) Center height above the grinding table: 330 mm (430 mm) Workpiece spindle bore: 50 mm (70 mm) Grinding table, Z-axis Total grinding table travel: 650 mm (950 mm) Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed rate: 0–9.99 m/min Feed rate: 0–99.99 m/min Incremental feed value during reversal: 0–0.999 mm Grinding table, X-axis Total grinding table travel: 150 mm Resolution: 0.001 mm/rev Rapid traverse: 5 m/min/rev Grinding feed rate: 0–5 m/min/rev Feed rate: 0–99.99 mm/min/rev Incremental feed value during reversal: 0–0.999 mm/rev Workpiece spindle head, B-axis Dwsdpfx Acezwmz Ts Uob Swivel range: −32° (−23°) to +2° Resolution: 0.0001° (0.36″) U-axis Total travel: 300 mm Resolution: 0.001 mm/rev Traverse speed: 5 m/min MACHINE DETAILS Control system: Siemens Sinumerik 840D Solutionline Machine weight: approx. 7.5 t Space requirement: approx. 5.00 × 4.00 × 2.20 m

Condition: excellent (used), Year of construction: 2011, MODEL AMADA TOGU EU PRESCISION TOOL GRINDING MACHINE WHEEL CBN 150 MAX TOOL DIAMETER 160 MAX GRINDING DEPTH ,ONE CYCLE, 0.99 SPINDLE MOTOR 1.5KW Dwodpfx Acszx Sixj Ueb SPINDLE MOTOR SPEED 3000 RPM VERTICAL TRAVERSE 200 MACHINE WEIGT 470 KGS PWOER CONSUMPTION 4.8 KVA

Year of construction: 1991, operating hours: 19,888 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1.844, MACHINE DETAILS Control system: CNC Dedpszxcl Rjfx Ac Uswb Operating hours: 19,888 h

Condition: used, Year of construction: 2014, functionality: fully functional, overall weight: 300 kg, total length: 1,800 mm, total width: 800 mm, total height: 1,500 mm, conveyor belt width: 300 mm, LOMA IQ3+ Metal Detector Conveyor Belt System Model 2014 Dsdpjx Tivzjfx Ac Uewb

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center width: 400 mm, turning length: 2,000 mm, feed rate X-axis: 420 m/min, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 3,800 kg, disc diameter: 450 mm, three-jaw chuck diameter: 320 mm, faceplate diameter: 450 mm, Metal Technics Polska Professional CNC machines, lasers and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe and Asia—used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision and reliability. UNIVERSAL LATHE MTP 800x2000 7.5 kW SPINDLE BORE 105 + DRO Manufacturer code: CW6180X2000 UNIVERSAL LATHE 800 × 2000 The machine is designed for machining workpieces, most commonly rotational solids (shafts, cones, spheres, internal and external threads). Typical tools include turning tools, drills, and threading tools. Thanks to modern solutions and equipment, the lathe is ideal for professional and industrial applications. Technical Data: Max. turning length: 2000 mm Swing over bed: 800 mm Swing over cross slide: 570 mm Swing in gap: 1035 mm Z-axis travel: 230 mm Gap length: 330 mm Bed width: 400 mm Tool post rotation: 70° X-axis travel: 420 mm Spindle speed: (16 steps) 25–1600 rpm Spindle bore: 105 mm Spindle mount: D1-8 Spindle taper: MT5 Feed X-axis: (25) 0.022–0.74 mm/rev Feed Z-axis: (25) 0.044–1.48 mm/rev Tailstock quill diameter: 90 mm Tailstock taper: MT5 Tailstock quill travel: 235 mm Tailstock adjustment: 11 mm (0.4") Dsdpfxeyzz Sqs Ac Uewb Metric threading: (54) 0.45–120 mm Diametral threading: (42) 0.88–160 DP Module threading: (46) 0.25–60 mm Whitworth threading: (54) 7/16–80 TPI Main motor power: 7.5 kW Power supply: 400 V Dimensions (L×W×H): 3740 × 1140 × 1910 mm Weight: 3800 kg Equipment: 3-axis digital readout (DRO) 3-jaw chuck Ø 320 mm 4-jaw chuck Ø 400 mm Faceplate Ø 450 mm Drive plate Splash guard Cooling system Fixed steady rest max Ø 250 mm Traveling steady rest Chuck guard Reduction sleeves Dead center Tool set

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, turning diameter: 295 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 750 mm, controller model: Hurco WinMax V11, TECHNICAL DETAILS Swinging diameter over cross slide: 402 mm Swinging diameter: 295 mm Spindle speed (max.): 3,000 rpm Travel in X-axis: 250 mm Travel in Z-axis: 750 mm Driven tools: VDI 40 Speed of driven tools (max.): 4,000 rpm MACHINE DETAILS Dwjdpfezy Iknsx Ac Ujb Control system: Hurco WinMax V11 Machine weight: 5,000 kg EQUIPMENT Renishaw tool measuring arm Internal cooling: 20 bar

Condition: used, Year of construction: 2014, YCM NSV 156A – Vertical Machining Center Vertical machining center with a 30-tool tool magazine, controlled in 3 axes with a Fanuc MXP-200FB control system. New Z-axis cover will be installed, 3400 cutting hours, standing under power. - Working range X/Y/Z: 1530 / 650 / 610 mm - Table surface: 1630 x 650 mm - Spindle taper: ISO 40 - Spindle motor: 22/7.5 kW (1 min/cont.) Included Optional Equipment - Spindle speed 12,000 rpm, BT40 Big Plus, 22/7.5 kW (1 min/cont.) - Tool changer/magazine for 30 tools, BT40 Big Plus - Spindle chiller - High-lift chip conveyor, hinge-belt type - Full enclosure guarding with roof - Through-spindle coolant, 20 bar, via pull stud - Heavy-duty coolant pump, 3 bar - Coolant nozzles around the spindle - Chip flush-out - Oil skimmer - Automatic main power shutoff (M30) - M-code, 1 pair - Safety door - Foundation bolts - Tool length/diameter/breakage measurement (Renishaw TS-27R) - CE marked - Prepared for 4th axis Technical Specifications – YCM NSV156A Travel Travel X/Y/Z 1530 / 650 / 610 mm Spindle nose to table surface 80 – 690 mm Table Table surface1630 x 650 mm Number of T-slots, pitch6 x 18 x 100 mm Table load capacity1500 kg Table surface to floor 950 mm Spindle (tool standard MAS BT40 Big Plus)Speed, S5 12,000 rpm Max torque 127 Nm Feed Rates traverse X/Y/Z48 m/min Working feed X/Y/Z, max1 – 20,000 mm/min Motors Spindle (1 min/10 min/cont.)22.0 / 15.0 / 7.5 kW AC X-axis feed5.5 kW AC Y-axis feed5.5 kW AC Z-axis feed 5.5 kW AC Ball Screws X/Y/Z axis Ø 45 mm Tool Changer Number of tool positions 30 Changing system Random (tools swap positions) Tool standard MAS BT40 Big Plus Pull stud YCM Max tool length 300 mm Max tool diameter (all pockets occupied)76 mm Max tool diameter (with adjacent pockets empty)125 mm Max tool weight6 kg Machine Dimensions Height 3051 mm Floor space, approx.2770 x 3855 mm Weight, approx.10,000 kg Power requirement39.5 kVA Standard Equipment NSV 66A, NSV 85A, NSV 102A and NSV 156A, with Fanuc MXP200FB control system - Spindle motor Alpha T8i (22 kW / 1 min) - Speed 12,000 rpm, max torque 127 Nm - Spindle ISO 40 - Tool standard MAS BT40 Big Plus + YCM special pull stud - Spindle chiller - Chip augers, dual, on both sides of the table - Fully enclosed guarding with roof - CE marked - Fanuc MXP200FB control system with YCM software Dwjdpezz Ad Sofx Ac Usb - PCMCIA card for easy program transfer and expanded memory - Memory 1280 m (512 kb) - 10.4" TFT color display with graphics - Manual Guide i – simplified menu-driven programming - AI Operation Plus - Helical interpolation - Tool offsets, total 200 - Coordinate systems: 48 - Synchronized (rigid) tapping - Macro B - Tool offset type C - High-speed function AI Nano CC - RS-232 interface

Condition: new, Year of construction: 2026, functionality: fully functional, turning length: 2,000 mm, turning diameter: 660 mm, spindle bore: 105 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, spindle motor power: 7,500 W, total height: 1,460 mm, total length: 2,840 mm, total width: 1,150 mm, type of input current: three-phase, overall weight: 3,600 kg, swing diameter over bed slide: 360 mm, Equipment: documentation/manual, Universal Lathe 660 × 2000 with DRO The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Operation manual (English) Machine available immediately. Technical Specifications Turning diameter over bed – 660 mm Turning diameter over cross slide – 360 mm Turning diameter in gap – 900 mm Turning length in gap – 250 mm Turning length – 2000 mm Bed – induction hardened Bed width – 350 mm Chuck diameter – 315 mm Spindle bore – 105 mm Spindle nose – D1–8 Spindle taper – MT7 Spindle speed range – 25 – 1600 rpm Maximum tool size – 25 × 25 mm Longitudinal feed range – 0.044 – 1.48 mm/rev Cross feed range – 0.022 – 0.74 mm/rev Metric threads – 0.2 – 14 mm Inch threads – 2 – 112 T.P.I. Module threads – 0.1 – 7 M.P. D.P. threads – 4 – 112 D.P. Rapid feed – longitudinal 4.2 m/min Tailstock quill diameter – 75 mm Tailstock quill travel – 180 mm Tailstock taper – MT5 Main motor power – 7.5 kW Coolant pump power – 0.1 kW Dimensions (L × W × H) – 2840 × 1150 × 1460 mm Weight – 3600 kg Dodpfxeyvgbfe Ac Uewb Delivery to the customer is possible. Delivery cost is determined individually according to the quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: used, Year of construction: 2005, turning length: 705 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, controller model: MORI SEIKI MSX-850, TECHNICAL DETAILS Turning diameter: max. 356 mm Standard turning diameter: 275 mm Turning length: max. 705 mm Travel in X-axis: 260 mm Travel in Y-axis: ±50 mm Total travel in Y-axis: approx. 100 mm Travel in Z-axis: approx. 795 mm Rapid traverse rate X/Y/Z: 30 m/min Tool stations: 12 MACHINE DETAILS Dwodpfozwgwzex Ac Uob Design: SY with Y-axis Control system: MORI SEIKI MSX-850 Bar feed magazine: LNS Quick Load Servo 2 Bar length: max. approx. 1,500–1,600 mm / 63″ EQUIPMENT Tailstock Driven tools Y-axis LNS Quick Load Servo 2 bar feed magazine

Condition: good (used), Year of construction: 2003, operating hours: 25,000 h, functionality: fully functional, type of input current: three-phase, overall weight: 13,000 kg, FOR SALE: Finn-Power F5 S Turret Punch Press Available for purchase is a high-quality, Finnish-made Finn-Power F5 S turret punch press. Manufactured by the renowned Lillbacka Corporation, this machine offers robust performance and precision for demanding sheet metal fabrication. Technical Specifications: Machine Type: Finn-Power F5 S Manufacturer: Lillbacka Corporation, Finland Manufacturing Year: 2003 Punching Force: 300 kN Djdpfjy Iwmwex Ac Ujwb Max. Working Pressure: 300 bar Machine Weight: 13,500 kg Key Features: CE Certified: Fully compliant with European safety and quality standards. Heavy-Duty Build: The 13.5-ton machine weight ensures excellent stability and vibration damping for high-precision work. Proven Reliability: Built with industry-leading technology and patented Finnish engineering.

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: HFE50-20LV010254, functionality: fully functional, pressing force: 50 t, stroke length: 350 mm, throat depth: 400 mm, working width: 2,090 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 8 Axis configuration: Y1 + Y2 + X1 + X2 + R1 + R2 + Z1 + Z2 Press force: 50 t Max. working width: 2,090 mm Frame distance: 1,665 mm Overhang: 400 mm Max. stroke: 350 mm Punch holder: Quick-change holder Tool holder type: European design MACHINE DETAILS Drive system: CNC Control system: Amada Operateur 2 CNC Power: 6 kW Dedpjzzbalsfx Ac Uewb Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,000 x 2,800 mm Weight: 5,500 kg Transport packages: 2 EQUIPMENT Tools Documentation CE marking

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 290 kg, power: 0.37 kW (0.50 HP), input voltage: 400 V, total length: 800 mm, total width: 750 mm, total height: 1,550 mm, feed length X-axis: 220 mm, feed length Y-axis: 220 mm, feed length Z-axis: 200 mm, grinding spindle motor power: 370 W, Special Offer – 5% Discount Available! Slotting Machine The Slotting Machine is a compact and reliable machine designed for precision slotting, keyway cutting, internal profiling and shaping operations. Its rigid construction and adjustable stroke make it an ideal solution for tool rooms, maintenance workshops and metalworking facilities. The machine features a rotating head with a 90° swivel, allowing greater flexibility when machining complex workpieces. With six selectable stroke speeds and a maximum stroke length of 125 mm, it delivers accurate and efficient machining for a wide range of applications. The robust construction ensures excellent stability and precision while maintaining low operating costs. The machine is suitable for both repair work and small-batch production. Main Features * Heavy-duty construction * Adjustable stroke * Six stroke speed settings * 90° swivelling head * High machining accuracy * Compact design * Easy operation * CE certified Technical Specifications * Maximum stroke: 125 mm Dwsdpfx Aceyux E Hs Usb * Stroke speed: 60–350 strokes/min * Number of speed steps: 6 * Head rotation: 90° * Table size: 500 × 200 mm * Table travel (X/Y): 220 mm * Z-axis travel: 200 mm * Motor power: 0.37 kW * Tool shank diameter: Ø10 / Ø16 mm * Machine dimensions: 800 × 750 × 1550 mm * Machine weight: 290 kg Applications * Slotting * Keyway machining * Internal profiling * Shaping operations * Tool rooms * Maintenance workshops * Metalworking * Small-batch production Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 63284-0012, turning length: 650 mm, turning diameter: 300 mm, spindle motor power: 15 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 680 mm, milling spindle length: 6,000 mm, type of input current: three-phase, bar passage: 65 mm, total height: 1,920 mm, total length: 3,130 mm, total width: 1,710 mm, spindle nose: A2-6, overall weight: 4,500 kg, Equipment: documentation/manual, MACHINE INFORMATION Manufacturer: Hyundai Model: KIA SKT2100SY Year: 2009 Condition: (Used) Great Serial Number: 63284-0012 Control: Fanuc Control Accessories: LNS Barfeed, Live & Static Tool holders, Swarf Conveyor, Parts Catcher, Tool Probe. Location: COVENTRY, UNITED KINGDOM MACHINE SPECIFICATIONS Control: Fanuc Control Bar Capacity: 65mm Chuck Size: 8″ Main, 6″ Sub Max Cutting Diameter: 300mm Dsdpfxszwhp So Ac Ujwb Max Cutting Length: 650mm Spindle Speed: 5000rpm Turret Positions: 12 Milling Speed: 6,000rpm Swing: 820mm X Axis Travel: 215mm Y Axis Travel: 110mm total (+55mm) Z Axis Travel: 680mm C Axis Travel: 0.001 degree

Condition: good (used), Year of construction: 1964, number of straightening rollers: 17, straightening roller diameter: 45 mm, Sheet width: 1650 mm Sheet thickness: 4 mm Straightening roller diameter: 45 mm Djdpfxjzzl H Nj Ac Uowb Support rollers: 140 pieces Straightening rollers: 17 pieces

Condition: used, Year of construction: 2003, LARCON METAL Model: LIJADORA DE RODILLO Number: 29 Year of construction: 2003 Dedpfx Acjxrz Nbs Uswb kW: 4 RPM: 1500

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 52 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, spindle motor power: 2,200 W, total height: 1,650 mm, total length: 1,900 mm, total width: 830 mm, type of input current: three-phase, overall weight: 790 kg, Universal Lathe TORNADO 400 × 1000 – 2.2 kW / 400 V With Digital Readout and Work Light Key Features Precision spindle roller bearings The spindle is equipped with high-precision roller bearings that ensure excellent machining accuracy and reliable operation even during intensive use. High-quality hardened and ground steel gears in the headstock transmission All gears inside the headstock are made from high-grade steel, hardened and ground to ensure smooth, quiet operation and long service life. Easy and quick gearbox operation The intuitive gearbox design allows quick and convenient speed changes and easy adjustment of machining parameters. Powerful drive motor The machine is equipped with a sufficiently powerful motor that ensures stable performance even under heavy loads. Dedpfoyr Ihlex Ac Ujwb D1-5 spindle mounting system The D1-5 camlock spindle system allows quick and secure installation of chucks and other accessories. Wide range of thread cutting capabilities The machine enables cutting of various thread types (metric, inch, module, and others), making it a versatile tool for many applications. Technical Specifications 🔩 Turning Capacity Maximum swing over bed: 400 mm Swing over cross slide: 250 mm Swing in gap: 520 mm Distance between centers: 1000 mm Maximum workpiece length (chuck + tailstock): ~920 mm 🛠️ Slides and Travels Compound slide travel: 125 mm (0.02 mm accuracy) Cross slide travel: 240 mm (0.04 mm accuracy) Longitudinal travel: 750 mm (0.2 mm) ⛓️ Drive and Speeds Main motor power: 2.2 kW / 400 V Coolant pump power: approx. 40 W Spindle speeds: 18 ranges (I/II) 65 – 1810 rpm 🧰 Threads and Feeds Metric threads: 0.4 – 7 mm Inch threads: 4 – 60 T.P.I. Module threads: 0.4 – 3 mm D.P. threads: 8 – 84 D.P. Longitudinal feed range: ~0.053 – 1.291 mm/rev Cross feed range: ~0.011 – 0.276 mm/rev 🧱 Construction and Spindle Bed width: 218 mm Spindle bore: 52 mm Spindle taper: MT6 Spindle nose: D1-5 CAMLOCK Tailstock: Quill diameter: 50 mm Quill travel: 110 mm Taper: MT4 📏 Dimensions and Weight Machine dimensions (L × W × H): approx. 1900 × 830 × 1650 mm Weight: approx. 640 – 790 kg (depending on configuration) Standard Equipment 2-axis digital readout (optical scales) 3-jaw chuck 200 mm + internal jaws set 4-jaw chuck 200 mm Faceplate 280 mm Steady rest Follow rest Dead centers MT4 – 2 pcs. Spindle reduction sleeve MT6 / MT4 Change gears set Coolant system Working light Lubrication pump Chuck key and toolpost wrench Set of service tools Safety guards compliant with CE standards Operating manual (English) CE Declaration of Conformity Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.