Used Mesh Baskets for sale (1,731)

Condition: used, L: 1250, W: 1050, H: 560 (mm). Product: Mesh Stillages. Type: Fixed construction stackable. Version: B-quality, with damage. Dodpjmn Ii Iefx Af Uoki Material: steel. Walls: mesh. Floor: steel. Euronorm (mm): 1200 x 1000. Colour: green. Surface treatment: painted. Internal length (mm): 1175. Internal width (mm): 980.

Condition: used, A used fully collapsible mesh container, also called a gitterbox, is a versatile and efficient storage and transportation solution. The walls fold down easily, allowing for compact storage when the container is not in use. The container can be stacked both when collapsed and unfolded. Djdpjx Ahq Hefx Af Uoki This optimizes storage space and logistical

Condition: used, Used mesh container - Eurnorm dimensions 1200x800 mm, 864 liters. Combining robustness with ease of use, this mesh container is the ideal choice for storing and transporting bulk goods. The open mesh walls mean that the contents are always immediately visible, which speeds up storage management and makes inspection easier. Dedpfxjyccy De Af Uoki Thanks

Condition: used, Used galvanized steel mesh container in Euro format 1200 x 800 mm. One long side of the mesh box can be folded open halfway. The steel frame and mesh are hot-dip galvanized. Thanks to its sturdy four-legged base, the mesh box is suitable for forklifts and pallet trucks and can be picked up from any side. Dkedpsyccyqefx Af Usi The top has a raised

Year of construction: 1988, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible. Dksdpfewfg Ewsx Af Uei

Year of construction: 2009, condition: ready for operation (used), A fully automatic lattice girder welding system for the production of reinforcing steel (rebar) is available. Outlet height: 1400mm, beam length min./max.: 800mm/16000mm, base width: 58mm, beam width range: 70mm-116mm, max. production capacity: 15m/min. Beam type KT: upper beam diameter range: 5mm-16mm, lower beam diameter range: 5mm-16mm, diagonal beam diameter range: 4.5mm-9mm, beam height range: 70mm-400mm, diagonal pitch: 190mm-210mm. Beam type KTS: top chord diameter range: 5mm-7mm, bottom chord diameter range: 5mm-7mm, diagonal beam diameter range: 5mm-7mm, beam height range: 80mm-310mm, diagonal spacing: 200mm. Documentation available. On-site inspection is possible. Dsdpowfg Ekjfx Af Uoki

Year of construction: 2001, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range with a bar diameter of 3mm to 6mm: 500mm-2150mm, mesh width range with a bar diameter of 2mm to 3mm: 500mm-2000mm. Grid length range with a rod diameter of 3mm to 6mm: 600mm-3000mm, grid length range with a rod diameter of 2mm to 3mm: 600mm-2000mm. Min. cross wire pitch: 12.5mm, min. longitudinal wire pitch: 25mm, wire diameter range: 2mm-6mm, max. number of longitudinal wires: 52, production capacity: 52 strokes/min, rated power at 50%: 840kVA, max. stack height: 600mm. Total system dimensions X/Y/Z: approx. 20000mm/7600mm/3400mm. Including longitudinal wire distributor in 40mm and 50mm pitch and longitudinal wire console in 40mm, 50mm and 75mm pitch. Documentation available. On-site inspection is possible. Dksdpfx Afswfg Eqs Uoi

Year of construction: 2007, condition: ready for operation (used), A glass and carbon roving production line (reinforcement mesh) Wilhelm Kneitz for the construction industry is available. 1) 3D production system consisting of two combined knitting machines Karl Mayer DG 6-30 2HS ELS, year of manufacture: 2007, working width: 2133.6mm, production capacity: approx. 800m²/8h, dimensions X/Y: approx. 8000mm/15000mm, weight: approx. 2600kg. 2) 2D production system consisting of one knitting machine Karl Mayer Cop HS 2-ST HG, gauge: 1/6inch, year of manufacture: 2012, working width: 2540mm, max. possible working width: 3505.2mm, dimensions X/Y: approx. 5500mm/8000mm, installation area X/Y: approx. 14000mm/18000mm. 3) Sample unit Karl Mayer Malimo 14022/PS-S2, year of manufacture: 1998, gauge: 1/6inch, optional gauge: 1/12inch, max. working width: 1270mm, installation area X/Y: 4000mm/6000mm, speed: approx. 800rpm. Documentation available. An on-site inspection is possible. Dkodpfx Afoxpw Tds Uji

Condition: used, Year of construction: 2000, functionality: fully functional, total width: 1,000 mm, total length: 3,650 mm, total height: 1,850 mm, overall weight: 600 kg, 1 Hambi Mattenschneidemaschine TV 25 V, working width 2.50 m, year of manufacture 2000, max. 12 mm single bar or 8 mm double bar, cutting time forward/backward approx. 13/10 sec. Connected load 3 kW. Dksdpfsvxtc Djx Af Usi

Condition: good (used), Slit screen basket, slit screen baskets, replacement basket, replacement baskets, separator basket, separator slit screen, separator filter grid, separator grid -Slotted sieve basket for: screw separator -Gap dimensions: 2 x 47 mm Dkedpfx Afjc Uc Urs Uoi -Unfolded dimensions: 1000 x 955 mm -Dimensions: 595/1000/H313 mm -Weight: 16 kg

Condition: excellent (used), Fire basket, fire baskets, fire pit, fire bowl -Square -Material: Steel -painted: Black -Number: 2 baskets available Dedsb Tgr Sspfx Af Uoki -Price: per piece -Dimensions: 500/500/H560 mm -Weight: 22 kg

Condition: excellent (used), Fire basket, fire baskets, fire pit, fire bowl, -Triangle -Material: Steel -painted: Black -Number: several baskets available Price: per piece -Dimensions: 570/570/H570 mm -Weight: 18 kg Djdpfx Ajb Tgr Usf Uoki

Condition: excellent (used), Fire basket, fire baskets, fire pit, fire bowl, Dedpfx Afeb Tgr Ts Uski -Around -Material: Steel -painted: Black -Number: several baskets available -Top diameter: 600 mm -Diameter at bottom: 380 mm -Dimensions: 600/H380 mm -Weight: 16 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: wire mesh, mesh wire -Wire division: 50 mm -Thickness: 25 mm -Drawing with the pictures -Total length: 550 mm Dodpfx Afoc Spnae Uoki -Total height: 194 mm -Weight: 20 kg

Condition: used, Thermoplastic polyurethane elastomers, pressure hose, air hose, plastic hose -Mesh protection hose: red -Number: 4 boxes available -Price: complete -Dimensions: 375/285/285 mm per box Dsdpfx Ajd Nkrzof Ujki -Total weight: 18.5 kg

Condition: ready for operation (used), Used blasting machine. Powered by four 7.5 kW motors. Includes custom-made blasting baskets with a width of 3500 mm. Ideal for cleaning and derusting metal surfaces. Dedox Tuwdjpfx Af Uoki Unreasonable offers will not receive a response. On-site visits are not desired and can only take place by appointment. All listed prices are exclusive of VAT. No rights can be derived from this advertisement or any related communications. The offered materials are circular in nature and may be classified as used, slightly used, or second-hand. Signs of use may be present, and quantities, availability, and specifications may vary. We strive to provide information as accurately and up-to-date as possible, but despite our care, price, type, or content errors may occur. We reserve the right to correct these errors.

Year of construction: 2021, condition: used, functionality: fully functional, You are bidding here on a Hobart rack conveyor dishwasher, model CN series. The machine was first installed in a canteen operation in 06/2021 and was used there for lunch service. Due to business closure, operations stopped in 12/2024. The dishwashing system was purchased new by the operator, treated with care, and all necessary maintenance was professionally performed. The machine will likely be available for delivery from February 2026. HOBART presents the new generation of the proven CN series as a powerful PROFI version – the new rack conveyor dishwasher delivers increased efficiency and cost-effectiveness, making commercial dishwashing even more sustainable. Professional, powerful, and reliable for the daily demands of commercial kitchens. Optimal wash results with low energy consumption – even for plastic items. The CN series rack conveyor machines are modular, operating from left to right with pre-wash, main wash, rinsing, drying, and roller conveyor discharge. You will receive an invoice with indicated VAT. Equipment details: • Climate exhaust air heat recovery for smart energy use • Climate-Pro heat pump saves up to 20 kWh • LC detergent saving system • Triple rinse • Washing system with wide-angle nozzles • Dynamic-Dry drying • Automatic water consumption • Empty rack detection • Permanent soil removal: ASR soil discharge • Control system with USB interface • Drop-in washing system • Color-coded cleaning aids • Coded curtains • Coded wash and rinse arms • Deep-drawn drain fitting • Fully deep-drawn wash basin • Easy-to-clean condenser • No contact between wares and wash water • TRI-RINSE: high-quality rinsing result via 3-stage zone • PERMANENT-CLEAN soil removal: revolutionary filter system eliminates manual pre-rinsing • LC detergent saving: reduces detergent consumption by up to 50% • Automatic water adjustment: machine consumption automatically adapts to load • CLIMATE heat recovery: optimally uses exhaust air • CLIMATE-PRO heat pump: innovation meets efficiency and cost-effectiveness • RACK-FLOW sensor system: easy one-person operation • Fully deep-drawn tank: no residue build-up • Easy-to-clean condenser • Deep-drawn drain fitting • DYNAMIC-DRY drying: optimal results thanks to new blower technology with higher dynamic airflow—up to 50% increased efficiency Technical data: • External dimensions (W x D x H): 4215 x 2336 x 2150 mm (see photo sketch) • Pass-through width: 510 mm • Pass-through height: 440 mm Dkodpfxox R R Utj Af Uoi • Electrical connection: 400V 3NPE 50Hz; 26.5kW • Model: CN-C-A-CDC • Serial number: 866707054 • Year of manufacture: 2021 6 months warranty on electrical components, limited to the replacement of defective parts (excludes labor costs for removal and installation). Warranty claims require installation and commissioning by an authorized Hobart service provider. Subject to change and errors.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 3945, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Serial number 3945 Dodpfxeyn Rgvo Af Uoki Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering It consists of - Vibrator for charging - 300 kg capacity - Magnetic conveyor for filling the furnace - Tempering furnace - max working temperature 950 C 3 temperature control zones strip width 250 mm Capacity 30-50 kg/h Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries

Condition: new, High quality grating supports with high load capacities, low priced alternative for grating - new -. Prices on request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (for a 2,70m truss then 3 supports are needed = 2.655mm) 1335mm Frame depths: 1,05m 1,10 1,20m Other depths on request! Uniformly distributed load: between 250 and 1.500kg Standard (price applies to the standard version): 1.000kg, i.e. also per pallet Grid size: 50 x 100 or 25x100mm Please also indicate which type of beam (truss type) you have when making an inquiry! So whether box profile (or IPE beam) 50 or 40mm, or whether you have trusses with step. Advantages: no sharp edges 200% safety factor - independent of the rack beams Can be tested for permissible deflection and structural failure Wide range of standard sizes and load capacities Dksdpfx Afeiuvxbo Uei MantaMESH is our market leading wire mesh shelving solution. MantaMESH delivers certainty with more than 70% open area and a 200% safety factor that exceeds the requirements for ANSI MH26.2 - 2007, NFPA 13 and the FM Global Approval Standard for ESFR Sprinklers. Compatible with ANSI MH 26.2 - 2007 Manufactured in Germany Pre-welded seamed support channels Pre-galvanized finish Maximum deflection independent of rack beams: 1100 mm deep: 6.67 mm at 1000 kg load Load at structural failure independent of support beams: 1100 mm deep: 2000 kg Mesh has more than 70% open area Example configuration - we will be happy to create a configuration for your application!!! Depth 1102mm width 881 mm 4 pre-welded support channels 50x100mm mesh size 1000 kg UDL independent of the support beams Front: fold 30mm outwards Rear: Fold outside 30mm downwards Item weight 9.43kg

Condition: good (used), Year of construction: 2013, 335 USED Basket Washer. EXTERNAL DIMENSIONS (in cm): - Width 138, - Length 95.5, - Height 195 (240 with the chamber open). The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. Dsdpfeyrgwlex Af Ueki We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: new, New MB Series Work Platforms – Designed as personnel baskets for use with forklifts, they serve as practical and standard-compliant aids. Technical Data Mounting type: Entry brackets Entry bracket inner distance: 160 mm Entry bracket inner width: 200 mm Entry bracket inner height: 80 mm Access position: Bottom Access side: Longitudinal Permitted number of persons: 2 Platform width: 800 mm Platform length: 1200 mm Finish: Painted Customs tariff number (EU): 84312000 Net weight: 120 kg Length: 1290 mm Width: 805 mm Height: 1890 mm Shipping length: 1290 mm Shipping width: 805 mm Shipping height: 1220 mm RAL code: RAL 2000 Color: Yellow-orange Load position: 600 mm Permitted total weight: 300 kg Stackable: No Delivery condition: Assembled Typical applications include maintenance, repair, assembly, and general service work both indoors and outdoors. Work Platform Type MB-D/L (Long Version) Approved for 2 persons – max. total weight: 300 kg Dimensions (LxWxH): 1290 x 805 x 1890 mm Dsdpfoygwrcox Af Uski Platform area: 1200 x 800 mm Net weight: approx. 120 kg Solid steel construction (square tubing), Exceptionally robust quality for long-term use With inward-opening access door Slip-resistant working platform Fork entry pockets with pin lock to prevent slipping off the forks Entry pocket dimensions: A 160 | B 200 | C 80 mm Galvanized tool tray Anchor points for PPE (personal protective equipment) Continuous toe board (height 150 mm) Rear wall with mesh guard, foldable to guardrail height TÜV Nord certified safety in accordance with DGUV standards Entry from the narrow side with forklift, ideal for e.g. reach trucks Painted finish: yellow-orange RAL 2000 Manufacturer MSRP: €952.00 net plus 19% VAT Condition: New / unused Construction type compliant with DGUV/UVV requirements Optional new UVV inspection available Delivery time: 5 working days Freight terms: ex works, loaded free of charge Loading: possible by forklift Shipping / Freight: Germany-wide €139 net, Europe-wide shipping possible If interested, simply write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Errors excepted All prices net plus VAT.

Condition: good (used), Dimensions: Diameter: 950 mm Height: 970 mm Djdjhx Nfgspfx Af Ujki Weight: 316 kg Sieve hole size: 2 mm

Year of construction: 2026, condition: new, functionality: fully functional, Screen Meshes and Perforated Sheets for VS Screening Machines Our high-quality screen meshes and perforated sheets are designed for efficient screening of soil, wood chips, gravel, and building rubble. Each mesh and sheet is built for durability, precision, and easy replacement - ideal for VS COMPACT, VS MEDI, and VS BIG models. Mesh Specifications: • Replaceable steel screen mesh • Standard opening: 20x20 mm, squared • Wire diameter: Ø3 mm • Fits all VS machines sizes • Custom openings available from 3 to 100 mm Perforated Sheet Specifications: • Replaceable cold-rolled steel sheet • Standard hole size: Ø20 mm, rounded • Thickness: 2 mm • Compatible with all VS models • Custom perforations from 3 to 100 mm Dksdpfx Afoxm S Eie Uei For custom mesh sizes or other modifications, contact us - we offer tailor-made solutions for all VS screening machines.

Condition: used, Year of construction: 2024, load capacity: 300 kg, empty load weight: 150 kg, total length: 1,200 mm, construction width: 800 mm, Passenger basket Dksdpfx Asu D Tcfof Uei Technical condition: New Description: Product information Work basket type RAK-duo The work basket, work platform, personnel basket or aerial work platform offers safety during repair and maintenance work on elevated parts of buildings, machinery, ceiling lighting, stocktaking etc. in accordance with the accident prevention regulations (UVV). Thanks to its robust steel construction and non-slip worktop, the work basket offers safe working at a wide range of heights. In addition, it is secured by a locking pin and prevents slipping off the forks. The work basket / work platform is equipped with a tool tray as standard and manufactured in accordance with BGVD 27 (industrial trucks) and leaflet U048.03 of the Wholesale and Warehousing Trade Association. The only work platform that can be picked up on both the wide and the narrow side and is therefore perfect for reach trucks.

Condition: used, A used mesh container with Euronorm dimensions of 1200 × 800 mm is a practical and well-organized storage solution for a variety of warehouse and logistics applications. Djdpfjx Hug Ejx Af Uoki With a generous 700-liter capacity, the container offers ample space for bulk goods, parts, returns, or order picking. The container is constructed of blue-painted