Used Measuring Beam for sale (10,147)

Condition: good (used), approx. 4 pieces h.a.l.m. Solar cell measuring system, cetisPV-CTL1 cetisPV-XF2-C cetisPV-XF2-R cetisPV-XF2-P Complete device - second-hand -: Price per unit ex location: 8.350.-€ (net) Complete device IV measuring system Manufacturer: H.A.L.M. Type: cetisPV Consisting of: CTL1 cetisPV-XF2-C cetisPV-XF2-R cetisPV-XF2-P Complete device Year of manufacture: unknown Ljdpfx Ahoukiu Neberl Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: like new (used), functionality: fully functional, Model D2: Measurable sheet sizes: 100 - 1600 mm Accuracy of reading: 1/2 mm (1/10 mm possible) Angular deviations: 1/2 mm Built-in glare-free illumination: 3 fluorescent tubes (174 Watt) Voltage: 220 V - 50 Hz Exterior dimensions in mm: 1775 x 1150 x 220 Ledpfjya Hfljx Ahbsrl Weight (without iron frame): ± 86 kg Price per item: 3,000. There are three measuring tables of this type available.

Condition: defective spare-parts repository (used), functionality: limited functionality, Dear Sir or Madam, Lrsdeyrcx Sspfx Ahbjl We hereby offer you the following device for sale: Keyence XM-1200 coordinate measuring machine. The device is defective and currently not operational. The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 13 May 2026. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: used, functionality: unexamined, Dear Sir or Madam, We hereby offer you the following device for sale: Keyence WM-C3000 coordinate measuring machine. The machine is sold with the equipment documented in the photos and specified in the advertisement text. Lsdpfxeyrcx Eo Ahbsrl Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 13 May 2026. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: used, Dear Sir or Madam, We are pleased to offer the following equipment for sale: Keyence VL-500 measuring system. The machine is sold with the equipment shown in the photos and listed in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! The equipment originates from an insolvency. We are auctioning this off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information regarding the current highest bid. Lsdpfx Ahey Iaa Toberl Your bid becomes binding upon receipt by email. Please submit your binding bid by 10:00 am on 13 May 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: used, functionality: unexamined, Dear Sir or Madam, We are pleased to offer the following machine for sale: Keyence XM-5000 coordinate measuring machine. The machine is sold with the equipment shown in the photos and listed in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! The equipment originates from an insolvency. We are auctioning this off to the highest bidder on behalf of the creditor/bank. Lrsdjy Iaayjpfx Ahbel This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Please submit your binding bid by 10:00 am on 13 May 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: used, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, VideoCheck S 400x200 3D CNC Year of manufacture: 2014 Measuring range: X = up to 400 mm Y = up to 200 mm Lrodpfxsxbifpj Ahbjl Z = up to 250 mm Installation area: Depth: 770 mm Width: 778 mm + 400 mm travel Height: 1673 mm + 200 mm travel Measuring device weight: up to 480 kg Max. workpiece weight: mmax = 40 kg

Condition: excellent (used), Year of construction: 2014, Year of manufacture: 2014 Lrodpfxey Rypmo Ahbel Operating hours: < 1000h Model: Optiv Classic 321GL tp Type: Multisensor measuring machine (Video + Touch Probe) Measuring range: approx. 300 × 200 × 100 mm Equipment: Granite base, optical sensor, touch-trigger probe • Maximum traverse speed (X/Y/Z): 160 mm/s • Maximum workpiece weight: 20 kg • Measurement resolution: 0.05 µm Measurement accuracy – Optical sensor • X/Y: Ex, Ey = (1.6 + L/250) µm • XY: Exy = (2.0 + L/250) µm • Z: Ez = (3.9 + L/200) µm Measurement accuracy – Touch-trigger probe system • X/Y: Ex, Ey = (2.0 + L/250) µm • XY: Exy = (2.5 + L/250) µm • Z: Ez = (2.9 + L/200) µm Measuring volume • Optical sensor: 300 × 200 × 150 mm • Tactile sensor: 230 × 200 × 150 mm Dimensions & weight • Dimensions (L × W × H): 705 × 986 × 890 mm • Machine weight: 170 kg Features • 3-axis microprocessor CNC with vector path control • Software: PC DMIS Vision • Vision sensor for contactless precision measurement • CCD camera with motorized 6.5× CNC zoom • DC servo motors • TESA probing system (1 body, 1 module), modular probe changer (TESASTAR, 4 slots / 4 modules) • Linear guides on all axes • Coaxial LED top light (white) • LED backlight (green + diffuser) • Multi-segment LED ring light • Evaluation computer included Technical data subject to change without notice. Prior sale reserved.

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231474, KEYENCE Model Series IM-6020, Year of Manufacture 2012 For sale is an optical measuring machine, KEYENCE IM-6020, in good, fully functional condition. The IM series is recognized for fast, high-precision, and operator-independent measurement, making it ideal for use in quality assurance, goods-in inspection, and production monitoring. Technical specifications (overview): Model: IM-6020 Year of manufacture: 09/2012 Measuring principle: Optical / non-contact Measuring range (X/Y): approx. 200 × 200 mm Measuring range (Z): Height measurement via autofocus Measuring accuracy: up to approx. ±2 µm (depending on measurement conditions) Repeatability: Very high, operator-independent Camera: High-resolution CCD camera Illumination: Incident light / transmitted light / contour illumination Measuring functions: - Length, angle, radius, and diameter measurement - Contour and form measurement - Comparative measurement (OK/NOK) - Automatic dimension recognition Software: KEYENCE IM software for quick program creation Measuring time: A few seconds per component (even for multiple features) Condition: - Used - Well maintained - Fully operational - Ready for immediate use Machine dimensions: approx. 900 x 500 x 1500 mm Machine weight: approx. 32 kg The machine can be inspected by appointment. Subject to prior sale and changes or inaccuracies in the technical data and specifications. Ledjy Htv Espfx Ahberl

Condition: ready for operation (used), Year of construction: 1986, Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joystick, SCR200 probe change magazine, calibration sphere, extensive probe accessories. Weight: approx. 2400kg, overall dimensions X/Y/Z: approx. 2100mm/1900mm/2350mm. Inspection possible by arrangement. Ljdpfsy T N H Tsx Ahborl

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 2299.001, For sale is a high-quality Modular Mass Production Tester (MPT) from NTS Optel – a professional testing and measurement system designed for automated quality control of optical components such as wafers, sensors, or micro-optics. This machine was developed for precise high-volume inspection of optical components and delivers the highest measurement accuracy, reliability, and flexibility for industrial applications. Thanks to its modular design, the tester can be perfectly adapted to specific production or development requirements. Lrjdpfx Aey R Dzgjhbjl 🔍 Features & Equipment • Integrated laser module (940 nm, circularly polarized) for precise optical illumination • High-resolution camera with automatic calibration and large field of view • Robot-based wafer handling (EFEM) for automated loading and unloading • Analysis software for evaluating efficiency, contrast, uniformity, and performance • CE-certified, including safety interlock and cleanroom-compatible design • User-friendly control via touchscreen and integrated GUI system • Connectivity for LAN, power, and compressed air (6 bar) ⚙️ Technical Advantages • Automatic image capture and evaluation of test specimens (DUTs) • Supports customer-specific software modules (DLLs) • Low maintenance, robust construction, high operational reliability • Optional: Z-axis control and wafer flip station 💡 Applications Ideal for research, development, quality assurance, and series production in the following sectors: • Optoelectronics • Sensor manufacturing • Semiconductor technology • Microsystem technology

Condition: like new (used), Year of construction: 2023, functionality: fully functional, type of input current: DC, input voltage: 24 V, temperature: 60 °C, operating temperature: 60 °C, protection type (IP code): IP67, Equipment: documentation/manual, type plate available, We are offering this as-new Endress+Hauser 8BE25-AFT5ABAB4A1A5 flow meter, year of manufacture 2023. Nominal voltage: 24 (20…30) V DC Power consumption: 3.5 W Switch output current: 500 mA Protection rating: IP67 Enclosure type: Type 4X Connection size: 1″ Tri-Clamp Material: 1.4539/904L Medium temperature range: -40…125 °C Ambient temperature range: -40…60 °C A total of 16 units are available. 8 units remain unopened in their original packaging. The other 8 units were unpacked and then determined to be the wrong type. They have not been in contact with any liquids. Therefore, they are in as-new condition. Lrjdpjy R N Ncsfx Ahbol Documentation is also still unopened and available. Price per unit: €1,750 Price is negotiable for purchase of the entire lot. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2010, 1" image sensor, 6.6 megapixels, CMOS Lredpfx Ahjy Ru Eijbsl Double telecentric lens Z-axis travel distance 30 mm Z-stage maximum load 3 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 640 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, total height: 2,320 mm, total width: 920 mm, total length: 1,130 mm, compressed air connection: 4 bar, Equipment: documentation/manual, Aberlink Axiom too 600 CNC CMM Machine Type: CNC Co-Ordinate Measuring Machine Version: Axiom too 600 Year: 2007 Condition: Like New as had very little use Lrodpfx Asyap R Rjhbsl Includes Upgrade to full CNC Auto Temperature Compensation SMC Refrigeration Air Dryer Aberlink Software PC & Monitor Description When the original Axiom CMM was released in 1997 it revolutionised CMM design utilising extremely innovative CMM technology. The Axiom was hugely successful but now Aberlink have taken all the best features from the original model and improved upon them. The Axiom too offers a larger measurement volume and higher accuracy than its predecessor, incorporating the very latest in materials technology. This Axiom too is the 600 size and is full the CNC version. Technical Specifications Measuring Volume: 640 x 600 x 500mm Accuracy: B89 0.008/300mm (VDI (U3) 0.0035 + L/250mm) Measuring System: Renishaw readheads and tape scale Resolution: 0.0005mm Probe System: Renishaw Max Velocity Vector: 500mm/sec Max Acceleration Vector: 1000mm/sec2 Bearings: Air Bearings on all axes Z Axis: Pneumatically counterbalanced Max Balance Weight: 1kg Air Consumption: 23 I/min (0.8 cfm) at 4 bar Required Air Pressure: 4 bar (60psi) Software: Full Graphical Interface designed for Windows Dimensions: 1130 x 920 x 2320mm Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Lrodpfx Ahsxyungsbsl Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, For Sale: S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland Lrsdpew Nygnsfx Ahbsl 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Lrodpfx Ahsw Nyfwebel Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes Ljdsy Dpmuopfx Ahbjrl CE

Condition: excellent (used), length 340 mm diameter - cutter standard 210 mm Lredpfxoy Ivdno Ahbsl weight 25 kg dimensions 0,5 x 0,3 x 0,3 m Master gear for gear checking machines. Neccessat´ry for calibration!

Condition: good (used), Tiger Beam Spreader Bar TAV Crane Spreader Bar with Two Adjustable Swivel Load Hooks Lrjdpfsy Nyyisx Ahbol These crane spreader bars offer versatile application for transporting a wide variety of loads in crane operations. This adjustable beam spreader bar features two adjustable assemblies, each equipped with a swivel hook for attaching the load. The spacing between the adjustable assemblies is set independently on each side using a notched grid system. This allows the desired working width to be adjusted very quickly. The adjustable assemblies can be quickly and easily repositioned along the beam within the grid increments (dimension VR). Thanks to this adjustability, the range of potential applications is significantly expanded compared to a rigid, fixed-width spreader bar. The Tiger TAV series crane spreader bars are equipped with two adjustable assemblies—including integrated handles—and two swivel load hooks. The scope of application for a beam spreader bar is extremely diverse. They are found everywhere: in manufacturing facilities, plant construction, on construction sites, and in intralogistics operations. In the field of intralogistics—specifically for loading large, heavy, and elongated cargo onto trucks, trains, and ships—they have become an indispensable tool. Tiger Support Stands for the safe storage of Tiger beam spreader bars | Load Capacity: 1,000 kg | Model: AFG5 Product Features Model: TAV-5-4 Load Capacity: 5,000 kg Hook Spacing (L): 2,000 – 4,000 mm Tiger Spreader Bars for Crane Operations Adjustable Crane Spreader Bar with 2 Load Hooks Suspension Point: Designed for single hooks (DIN 15401) Finish: Painted in RAL 1004 (Golden Yellow) Dead Weight: 335 kg Overall Height: 800 mm Manufacturer's Price: €3,223.71 Support Stands: €877.03 Find more items—both new and used—in our online shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. Lredey Tanuspfx Ahbel All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfer unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment of upper spindle: electric Optionally with/without feed Feed brake system: Yes Feed speed infinitely variable up to: 3 – 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing cutter on jointer: Yes Powered rollers in table: 1 Control type: PLC control Spindle position display: mechanical numerical display Infeed rollers before jointer: Yes Air cushion table: triple track Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Lrodpfx Aewwwkhohbol Location: Nattheim

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser power: 40,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, overall weight: 5,000 kg, Equipment: cooling unit, X axis travel distance (mm): 3500mm Y axis travel distance (mm): 28000mm Z axis travel distance (mm): 850mm A axis travel distance (mm): ±90° C axis travel distance (mm): ±90° U axis travel distance (mm): 30mm Maximum speed: 40m/min Positioning accuracy: ±0.1mm Support steel types: H-beam, channel steel, I-beam, T-beam, angle steel Maximum size of steel section: 1000mm*400mm Lrodpfjvzyf Dsx Ahbsl Maximum weight of steel: 5tons

Condition: excellent (used), Catalog number: 7996 TECHNICAL DATA - max. main blade diameter with scoring blade: 400mm - blade bore diameter: 30mm - max. cutting height: 120mm - main blade adjustable up/down + angle - blade guard - with a sizing carriage - cutting length on the carriage: 3200mm - cutting width with guide: 1270mm - with a side carriage - with a scoring blade - max. scoring blade diameter: 120mm - spindle diameter: 20mm - scoring blade motor: 0.75kW - main motor: 5.5kW - 2 types of rotational speeds: 4000, 6000 rpm - dust extraction nozzle diameter: 75mm, 100mm - table dimensions: 1060x640mm Lrodoy T Ntaopfx Ahbsl - table dimensions with extension and widening: 1660x1550mm - dimensions (L/W/H): 3350x3470x1400mm - weight: 770kg ADVANTAGES – clamping bar included – with table extension and widening – unpainted – used saw, very good condition Net price: 16,900 PLN Net price: 4,030 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, 3D Coordinate Measuring Machine | Brand: MAUSER/ZEISS | Type: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally available with an air-conditioned hall. The machine has been calibrated regularly by ZEISS. The last calibration was performed on August 7, 2025, the next calibration (recommended) is scheduled for August 2026. TECHNICAL SPECIFICATIONS:: Measuring ranges (Length x Width x Height): 6.000 x 2.500 x 2.000 mm Travels: - X-axis: 6.000 mm - Y-axis: 2.500 mm - Z-axis: 2.000 mm - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5,0 + L/250)µm, V2 = 3,5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5,0 + L/250)µm - Environmental conditions for maintaining the specified accuracy: * Temperature range: 21°C +/- 3°K * Temperature fluctuation: 0,5°K/h, 1,0°K/d, 0,5°K/m - Environmental conditions for operation: * Temperature range: + 15°C up to 35°C * Humidity: 30 up to 70% General features, Equipment: - Portal measuring machine with ultra-precision guides and ball-screw drives - Second Y-axis with granite guideway and air bearing - High-resolution Zeiss scales Ledpfey Iub Sex Ahbjrl - Positive-drive mechanisms in all three axes - Collision protection for the quill and probe head (for VAST-TK) for manual and setup modes - Safety position for crane interlock - Reference temperature compensation - Microcomputer control - Practice piece: cube, star-shaped stylus - Reference probe D = 8 mm, length: 115 mm - Reference standard D = 30 mm - includes basic software package - Load-bearing capacity: Limited only by the foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -