Used Material Feeder for sale (18,807)

Year of construction: 2009, condition: used, Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Manufacturer: Genie, Superlift Contractor SLC-18 -Load capacity: max. 295 kg -Lifting height: max 5.1 m -Techn. Data: see photos -Equipment: with winch, with standard fork -Dimensions: 1880/800/H2170 mm Gksdsi Dbz Sjpfx Acmod -Own weight: 151 kg

Condition: new, Technical data for the shelf connector: Shelf system: Nedcon Type: NS Gedpfx Asi Dfm Ejcmskd The scope of delivery includes: 01x Set of screwed spacers NR, L300, new consisting of: 01x Spacer NR, L=300, galvanized 02x Hex head screw 8.8 M10x25, galvanized 02x Serrated nut 6-lobe 8.8 M10, galvanized flange 02x Flat washer M10, galvanized

Condition: ready for operation (used), jaw width: 160 mm jaw height: 45 mm span width: 173 mm total height: 173 mm Gkedpfsd Hyflsx Acmsd weight:

Condition: ready for operation (used), jaw width: 120 mm Gkodpfxod Hy Rys Acmsd jaw height: 40 mm span width: 120 mm total height: 120 mm

Condition: ready for operation (used), jaw width: 110 mm jaw height: 33 mm Gsded Hy Rzopfx Acmskd span width: 75 mm total height: 100 mm

Condition: used, Material clamp, material gripper, load clamp Lifting clamp, hoisting clamp, block grab Manufacturer: NORDGREIF, Type 7548 Year of manufacture: 1997 Load capacity: 500 kg Gripping width: 280 to 420 mm - Width adjustment via trapezoidal thread with hand crank - Rubber protective coating on the gripping surfaces Gkedpfx Aodz Spnecmed - for crane operation - with CE marking Weight: 50 kg good condition

Condition: good (used), Rapid Load 12 Bar feeder Bar Loader Turn diameter bed: mm Turn diameter support: mm Passage: 6-80mm Turning length: 150-1215mm X axis: mm Y-axis: mm Z-axis: mm Turning speed: - Rev/min Cone: Longitudinal displacement drilling head (X axis): mm Arm travel height (Y axis): mm Min distance column -- drilling spindle (X axis): mm Max distance column -- drilling spindle (X axis): mm Spindle diameter: mm Max drilling depth: mm Max drilling depth: x mm Bed dimensions: x mm Gkodpfx Acouhznbjmjd Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation available Location: Hamont-Achel, Belgium Rapid Load 12 Bar feeder Bar Loader Bed turning diameter: mm Support turning diameter: mm Throughput: 6-80mm Turning length: 150-1215mm X-axis: mm Y-axis: mm Z-axis: mm Speed: Rpm Taper: Drill head longitudinal displacement (X-axis): mm Arm height displacement (Y-axis): mm Min distance column -- drill spindle (X-axis): mm Max distance column -- drill spindle (X-axis): mm Spindle diameter: mm Max drilling depth: mm Max clamping: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation present Location: Hamont-Achel, Belgium Rapid Load 12 Stangenlader Bettdrehdurchmesser: mm Drehdurchmesserunterstützung: mm Opening range: 6-80 mm Drehlänge: 150-1215 mm X axis: mm Y-axis: mm Z-axis: mm Speed: - U/min Cone: Längsverschiebung des Bohrkopfes (X-Achse): mm Armhöhenverschiebung (Y axis): mm Minimum distance between sleeve and drilling spindle (X axis): mm Maximal distance between module and drilling spindle (X axis): mm Spindle diameter: mm Max. Drilling depth: mm Maximal machining wall: x mm Bettmaße: x mm Schnittlänge: mm Schnittstärke: mm Steuerung: Fanuc Construction year: 1997 Betriebszeiten: Transportmaße: 166x60x105 cm (LxWxH) Documentation verfügbar Standort: Hamont-Achel, Belgium

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm Gkedpjwav R Sofx Acmod width:600mm weight:80g in good condition! If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection Gkodpswh Tq Sjfx Acmed • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 12355, Offer 25080 Movable panel rack with 10 movable material stands Technical specifications: Gedpfsv Ra Idex Acmskd - Stand - Shelf dimensions / support dimensions W 3000 x H 1800 mm - Shelf depth / footprint 180 mm - Maximum load per shelf: 2000 kg - Slide-in support bracket - Track rail L 4750 mm - Total space requirement approx. L 4750 x H 2200 x D 4000 mm - Weight approx. 3000 kg

Condition: reconditioned (used), Now in stock at Glendale we have this Morgana Major Folder. This Morgana Major is in perfect working condition having been refurbished by a Morgana trained engineer. It includes a recently replaced new motor and rollers. The sheet count is very low at just 283,000 sheets. This Major folder also includes the perforation and scoring unit. The Morgana Major has been designed to offer a wide range of ‘big machine’ features within a compact and easy to operate design. Changing from one size to another, or for different folds, can be accomplished in seconds. The Morgana Major incorporates counting and batching, with perforating and scoring as standard. A number of unique features have been developed to ensure that the Morgana Major can handle output from digital processes, as well as litho printing. The fold rollers are extremely durable and have the ability to handle a wide variety of stock without adjustment. Not affected by paper dust, their unique composite material will positively grip high gloss papers or work from digital print engines. The Dial-a-Fold plate settings enable all adjustments to be made without removing the covers. An LED display, accurate to 0.1mm, shows the fold plate position and allows easy and accurate repeat job settings. A powerful suction feed handles a wide range of coated or non-coated material and incorporates side lay alignment of the sheets before they enter the fold plates. The feed table also has a suction chamber to control curled or statically charged paper. A larger sheet size of 365mm width and 648mm length makes the Morgana Major even more flexible, capable of producing 6pp A4 documents. The machine speed is fully adjustable from 4500 to 27,500 sheets per hour, giving the operator complete control over the production of a wide range of stocks. The plug-in perforator/scorer is included with this Morgana Major and work is delivered into a catch tray. Key Product Features • Powerful suction feeder handles a wide range of paper weights • Side lay alignment of the sheets, prior to folding • Low pressure suction chamber to control curled paper before it enters the fold rollers • Fully enclosed fold plates with ‘dial-a-fold’ and LED display, fitted with anti-static brushes, skew and micro adjustments • Plug in perforating and scoring attachment • Variable speed Gkjdjv Hr D Nspfx Acmjd • Tray to catch work when perforating or scoring • Long delivery belt stacker • Counting & batching • Double sheet, anti jam detector Specifications Manufacturer Morgana Model Major Folder Condition Refurbished Stock Number 114925 Max sheet size 674mm x 365mm Min sheet size 148mm x 140mm (94mm with optional narrow sheet attachment) Max paper weight 240gsm (grain direction depending) Min paper weight 56gsm Feeder capacity 500 sheets 80gsm Feeder Suction Feed Speed 4,500 to 27,000 per hour Perforating & Scoring Attachment included Power requirements 240v 50/60hz Machine weight 120kgs Dimensions (L)1168mm x (W)493mm x (H)990mm

Condition: good (used), Year of construction: 1998, Baujahr 1998 Spindelstunden 52’000h Stangendurchlass 40mm Gkedpfetth Hgox Acmjd Fanuc Series 18i-T Späneförderer Toolsetter integriert 12Stationen 1Spindel, X und Z Achse Kurzstangenlader Spannzangenfutter F48

Condition: used, Year of construction: 1988, BOBST Printing Machine with 4 bottom colors anilox cilinders 120l/cm and 80l/cm Gksdpfjv Ifpusx Acmod TRANSFER BOBST FLATBED DIE CUTTER BOBST AUTOPLATINE SPO 1600, max format 1100 mm x 1600 mm / 43.3" x 63" with 4 Bottom Printing unit and transfer Bobst * Vacuum feeder * Die cutting section * Waste elimination section * Centerline II * High pile delivery with two lifting tables * Max sheet format: 1100 mm x 1600 mm / 43.3" x 63" * Min sheet format: 520mm x 600mm / 20.5" x 23.6" * Cutting force: 400 t * Materials: E, B, C, CB, BE flutes * Max speed: 6,000 sheets/hour Possibility to sell them separately

Condition: good (used), Horizon RD-4055 Rotary Die Cutting Machine The machine is in perfect condition, has low mileage, and is ready to work. Machine setup is via the control panel. Made in Japan. The set consists of: – FFU-4055 sheet feeder – RD-4055 rotary die cutter with double magnetic cylinder (top and bottom) – SPC-4055 separator Manufacturer’s description: – Cost reduction thanks to multiple die reuse, – Machine operation via TOUCH & WORK touchscreen, – Short machine setup time, – Precision and excellent final product quality, – Very easy and quick die assembly on the magnetic cylinder Technical data: – Maximum sheet size before processing: 400 x 550 mm – Minimum sheet size before processing: 200 x 275 mm – Processed material: standard paper, coated paper, and cardboard – Material thickness: 188 to 400 g/m² – Feeder stack height: 500 mm – Production speed: 6,000 cycles per sheet hour Gsdpfx Aoz R Iq Uocmskd Factory set of tools and accessories, instructions.

Condition: refurbished (used), Year of construction: 2019, operating hours: 450 h, functionality: fully functional, type of input current: three-phase, total height: 2,836 mm, total width: 2,930 mm, total length: 2,500 mm, overall weight: 6,500 kg, empty load weight: 6,500 kg, Equipment: documentation/manual, Refurbished Optima 154 shredder. In very good condition - like new. Is a single shaft shredder of medium speed. Electric drive and hydraulic pendulum feeder, with low energy consumption. The pendulum feeder press the material against the rotor, Gjdpfxo Aarako Acmjkd equipped with fixed teeth that cut the material against anvil steels.
 The feeder, is operated by a last generation hydraulic system with proportional valve or hydraulic variable displacement axial piston pump.
 The process is set from software in the PLC. Key benefits: • Low electrical consumption. • Low dust and noise level. • Very simple maintenance. • It is not necessary with rotor cooling. • Can process material down to 10mm in one step. • Technical availability from 96% to 98%. • Possibility to add water in the inlet. Shreds materials: 
 Industrial waste • Urban waste • Logs • Laminates • Bark • Wood waste • Paper • Craft • Plastic • Textiles. Is on a hook-lift platform, so easy to transport. New price Optima 154 shredder - aproximately euro 300 000,00

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 495 mm, total height: 780 mm, total width: 585 mm, overall weight: 17 kg, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system is available immediately! TECHNICAL DETAILS Build volume X-axis: 230 mm Build volume Y-axis: 190 mm Build volume Z-axis: 200 mm Layer height: 0.06–0.4 mm Build plate: Heated glass plate Build plate temperature: up to 120 °C Filament diameter: 2.85 mm Nozzle temperature: up to 280 °C Print speed: up to 150 mm/s Material flow: up to 24 mm³/s Compatible print cores: AA 0.4; BB 0.4; AA 0.25; AA 0.8; BB 0.8; CC 0.4; CC 0.6; DD 0.4 MACHINE DETAILS Technology: Fused Deposition Modeling (FDM) Software Print preparation: UltiMaker Cura, Cura Cloud Printer management: UltiMaker Digital Factory Supported operating systems: Windows, macOS, Linux Environmental conditions Operating temperature: 15–32 °C Operating humidity: 10–90% RH, non-condensing Storage temperature: 0–32 °C Non-operating humidity: 10–90% RH, non-condensing Installation: Away from direct sunlight Power supply: 100–240 V AC Gkjdpfx Acez Tf D Djmed Mains frequency: 50–60 Hz Power consumption: 350 W Operating noise: < 50 dB(A) Connectivity: WLAN 2.4 GHz, LAN, USB Monitoring: HD camera Dimensions & Weight Dimensions: 495 × 585 × 780 mm Net weight: 14.4 kg Operating weight: approx. 17 kg EQUIPMENT Dual-extrusion print head Automatic nozzle lift system Interchangeable print cores Dual-gear feeder Filament flow sensors Dual spool holder with NFC detection Color touchscreen HD camera Heated glass plate PEI print bed Spool holder with material guide Power cord Ethernet cable USB stick Operating manual CE marking Print Core AA 0.4 – 2 pieces Print Core BB 0.4 – 1 piece Nozzle cover – 3 pieces

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, LNS Sprint 552 - Bar Feeder Gkodpfx Acjz Truiemjd - Bar diameter: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, or 8 bars - Additional accessories and sleeves

Condition: used, The Nagema FBFC/1 is a heavy-duty, industrial Continuous Butter Making Machine (CBM) engineered for the commercial dairy sector. Manufactured by the historic German engineering brand Nagema, this machine processes bulk cream into high-quality butter via a fully continuous automated cycle. A detailed technical breakdown of the machine's specifications and functional systems is outlined below. ----- Technical Specifications - Production Capacity: Up to 2,500 kg/h of finished butter output. - Raw Material Suitability:Sweet / Cultured Cream: 45% to 50% fat content. - Sour Cream: 38% to 42% fat content. - Dimensions: Approx. 390 cm (Length) × 100 cm (Width) × 255 cm (Height). - Total Machine Weight: Approx. 3,100 kg. - Main Drive Motor (Beater): 22 kW to 30 kW operating at 650 to 1,950 rpm (manually adjustable via an external handwheel or modernized variable frequency inverter). - Auxiliary Drives:Auger feeder motor: 0.4 kW (925 rpm). - Raw material pump engine: 1.1 kW (2,760 rpm). - Water pump motor: 1.1 kW (2,760 rpm). - Integrated Centrifugal Pumps: 2x Nagema pumps with a maximum capacity of 13 m³/h. - Electrical Parameters: 380V / 50Hz, 3-phase power supply. ----- Structural Design & Materials - Hygienic Construction: All areas that come into contact with the product are made entirely of premium stainless chromium-nickel steel to satisfy strict food safety regulations. - Frame: Heavily reinforced painted steel, cladded completely with a stainless steel outer shell. - Controls: Simple, user-friendly control interface deployed directly on the machine body. Modernized variations often feature integrated variable frequency drives (VFD/Inverters) for smooth, digital speed management of the main churning drum. ----- Step-by-Step Functional Sections The FBFC/1 achieves continuous production by arranging its mechanical processes sequentially within its horizontal frame: [[1]()] - The Churning Cylinder (Beater): Cream is continuously pumped into the front end of a cooling-jacketed cylinder. Inside, the high-speed rotating beater strikes the cream forcefully. This mechanical action rapidly disrupts the fat globule membranes, reversing the emulsion to separate raw butter grains from liquid buttermilk. Godpfez S Ni Uox Acmjkd - Separation and Additional Churning: The resulting mix moves into a designated separation block. The buttermilk is systematically drained and collected by integrated centrifugal pumps, leaving behind a concentrated formation of pure butter granules. - The Kneading Zone: Dual counter-rotating augers push the raw butter grains forward. This mechanical kneading forces out remaining pockets of buttermilk moisture, tightly binds the butter matrix, and distributes water particles evenly. This process ensures the exact moisture profile (ranging from 16% to 25% based on settings) before the final product exits the machine. - Outfeed Distribution: The dense, finished butter is continuously extruded from the mouthpiece, frequently feeding directly into bulk packing systems or automatic wrapping machines. Technical Data & Specifications - Machine Type: Semi-automatic auger-fed system - Maximum Output: Up to 150 to 151 cartons per hour (depending on operator speed) - Product...

Condition: new, functionality: fully functional, A new log step feeder will be made to order based on your technical requirements. Gkedpfx Ajyfmn Rocmod

Condition: excellent (used), functionality: fully functional, power: 160 kW (217.54 HP), fuel type: electric, maximum load weight: 48,800 kg, lifting height: 18,000 mm, Year of construction: 2012, Fuchs Terex RHL860D – Electric Material Handling / Loading Equipment We offer this excellent-condition, ready-to-work Fuchs Terex unit. Manufacturer: Fuchs Terex Model: RHL860D Year of Manufacture: 2012 Condition: Very good This machine is fully electric driven, offering significant operational and environmental advantages: Key Advantages of Electric Drive: Zero CO₂ emissions Gkodeyf Nnyjpfx Acmjd Low noise levels with high-torque electric motors Minimal heat generation Future-proof drive technology Low maintenance and operating costs Comprehensive monitoring of power supply quality and machine grounding Designed for 24/7 operation Large working radius, expandable with optional cable drums or power packs An ideal solution for efficient, sustainable, and continuous material handling operations. Shipping assistance available from the Port of HaminaKotka, Finland. An electric excavator is well suited for this type of application, where the need for relocation is minimal. When necessary, the machine can be driven to the maintenance hall using a dedicated power cable. Compared to an internal combustion engine, the electric motor is largely maintenance-free. Another major advantage of electric power is that fuel does not gel even in severe cold conditions. During cold periods, the hydraulic system is kept continuously running, ensuring that the hydraulic oils remain warm. The Terex Fuchs contains 700 liters of hydraulic oil, and oil change intervals are determined through oil sample analysis. A significant reduction in operating costs is achieved through electric operation, which is considerably cheaper than diesel. The power supply comes from the factory network at 690 volts, which is stepped down on the machine to the Terex Fuchs operating voltage of 400 volts. The electric motor driving the hydraulics has an output of 160 kW. The pump delivers nearly 500 liters per minute at a pressure of 360 bar. Power to the pump is supplied according to the oil demand of the hydraulic consumers, which reduces overall power requirements.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 15,080 h, Liebherr LH30. Year: 2015. Hours: 15,090. Industrial boom 6.80 m. Industrial stick 5 m with front cylinder. Four outriggers. Solid tires. CE certificate. Good condition. Gksdpfx Asya Iadscmed

Condition: used, Year of construction: 2022, - FANUC 0i-TF CNC Control - 60° slant bed - Cross slide with linear guides - Part separator - Coolant unit - Chip conveyor - Power on time: 2775 h - Machining time: 743 h - Year of manufacture: 2022 LNS Sprint 552 - Bar feeder - Bar diameter: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar capacity diameter: 32 mm - Max. spindle speed: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Working area: - Workpiece diameter/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank diameter: 20 mm - Tool holder (square): 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: Gkedpfx Aswrp Dpecmsd - Power 100%/40% DC: 3.7 / 4.4 kW - Torque: 20.2 Nm - Energy consumption: 5.4 kWh - Total power: 8.8 kW - Operating voltage: 400 V - Rated current: 16 A Dimensions & weight: - Footprint: 1900 x 1030 mm - Weight: 1230 kg

Condition: ready for operation (used), functionality: fully functional, bar length: 3,200 mm, bar diameter (max.): 43 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Min. bar changeover time 27 sec. Feed rate 150 mm/sec., adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Gksdpfxow Rcfvo Acmed Installed power 3 KW Compressed air 6 bar Weight 900 kg

Condition: excellent (used), Year of construction: 2011, Vibratory feeder for aligning under slicer, cutting machine, or dicing machine Gjdjwykktopfx Acmekd

Condition: used, Der Streifeneinleger Josef Foellmer OK 90 eignet sich perfekt für den Einsatz in Druckmaschinen aller Hersteller. Geeignet für Heidelberg SM52, SM74, SM102, XL106 und CD102 Druckmaschinen. The Josef Foellmer OK 90 strip feeder is ideal for use in printing presses from all manufacturers. Suitable for Heidelberg SM52, SM74, SM102, XL106, and CD102 printing presses. Gsdpfxexp H Uqs Acmjkd Streifeneinschießer - Tab Inserter Josef Foellmer OK 90 Year 1998 - Serial-No. 91882 mobiler Streifeneinschießer / mobile  Tab Inserter on rolls Höhenverstellbar / Height adjustable Streifeneinleger für alle Druckmaschinentypen Strip feeder for all types of printing machines Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test