Used Marposs for sale (117)

Condition: ready for operation (used), Year of construction: 2002, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: fanuc, controller model: 16i MA, table width: 1,000 mm, table height: 500 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, overall weight: 9,300 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 8,000 h, spindle nose: HSK 63A, number of slots in tool magazine: 25, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, High-speed, high-precision vertical machining centre of Japanese manufacture. Furthermore, equipped with the following OPTIONS: MARPOSS wireless 3D workpiece measuring probe, swarf/chip conveyor, high-pressure coolant through the spindle, extended coolant system: 12 nozzles, 100 l/min capacity, electrospindle: 20,000 rpm, 22 kW, HSK 63A taper, with dedicated chiller, tool magazine expanded to 25 positions, FANUC high-dynamic drives (Alpha 22 and Alpha 30), ballscrews cooled by a dedicated chiller, linear optical scales, tool setter (length and breakage detection), active tool load monitoring, ROTOCLEAR on the main door, FANUC SUPER GI option (Geometric Intelligent Control), FANUC RISC option (Reduced Instruction Set Computer), FANUC NURBS option (Non Uniform B-Spline), Nljdpfx Aoxryb Noa Esk FANUC DATA SERVER option (160Mb), FANUC ETHERNET network port option, serial RS 232 output.

Condition: excellent (used), Center height 300 mm Nledpfetpgnhex Aa Eok Distance between centers 3500 mm Grinding wheel 760 x 305 x 100 mm With DRO With measuring control MARPOSS Misc.accessories MARCELS MASCHINEN AG

Condition: good (used), Year of construction: 2022, CNC Lathe Manufacturer: DMG MORI Machine Model: CLX 350 V1 Control: SLIMline 0i-F Plus Fanuc Touch Year of Manufacture: 2022 Controlled X/Z axes TECHNICAL DATA Turning Length: 540 mm Spindle: Motorized spindle 11/16 kW Tool holder: VDI30 with 12 AC motors - Speed: 5,000 rpm - Spindle Nose: A2-6" main spindle - Drive Power (100/40% duty cycle) 11/16.5 kW Turret: 12-station - Driven: 12 stations - Tool holder: VDI 30 EQUIPMENT FEATURES + Technology cycle for applying alternating speed for vibration-critical setups + Direct X-axis position measuring system + Programmable positioning and Pressure force. + Ergonomic DMG MORl SLIMline® control panel + Hollow clamping device, max. bar capacity D65 mm + Tailstock, hydraulically movable via M-function + External electronic handwheel + Chip disposal package: + Chip conveyor with right-side discharge instead of the chip tank + 4-color signal lamp + Differential pressure clamping for the main spindle + Foot control pedal for tailstock + Automatic NC tailstock: Maximum machining flexibility - full force control in the range of 0.7 - 3.5 kN + High-pressure pump 12 bar + Coolant spray gun 5 bar + Manual tool measuring device in the work area, made by MARPOSS + Mechanical oil mist separator type AFS 600 Nsdpfx Ajw Hxi Dea Ejlk Subject to changes and errors in technical data and information.

Condition: used, Year of construction: 2005, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 560 mm, - Manufacturer: Matsuura - Fanuc 31i with Manual Guide - Model: V-plus 550 - Year of manufacture: 2005 - X-axis: 550.0 mm - Y-axis: 410.0 mm - Z-axis: 560.0 mm - Table length: 870.0 mm - Table width: 400.0 mm Nlsdjxwbqcopfx Aa Ejk - Max. workpiece weight: 400.0 kg - Tool magazine capacity: 30 positions for BT40 - Max. spindle speed: 15,000 rpm - Through-spindle coolant - Marposs laser probe - Machine documentation

Condition: ready for operation (used), Year of construction: 2012, operating hours: 21,109 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 80, TECHNICAL DETAILS Travel X-axis travel: 550 mm Y-axis travel: 1,000 mm Z-axis travel: 500 mm Axes A-axis: +300° / -120° C-axis: 360° C-axis resolution: 0.0001° Clamping Table Table dimension: Ø 500 mm Table dimension with zero-point system: 356 mm x 356 mm Max. table load: 350 kg T-slots: 18H8 x 4 Workpiece size: 650 x 500 mm Njdpew Stpujfx Aa Ejlk Spindle Spindle speed range: 50 – 20,000 rpm Spindle power: 18.5 kW (S6) Spindle torque: 95 Nm (S6) Tool holder: HSK63 Control Control manufacturer: Fanuc Automatic Tool Changer Tool holder: HSK63 Number of tool positions: 80 Indunorm Pallet Changer Pallet size 1 for automation: 6 pcs 398 mm x 398 mm Preset pallet for Erowa IST: 1 pc 398 mm x 398 mm Pallet size 2 for automation: 15 pcs Erowa ITS115 mm Pallet size 3 for automation: 32 pcs Erowa ITS50 mm Transfer weight incl. pallet: 300 kg Rapid Traverse Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A/C-axis: 18,000°/min (equivalent to 50 rpm) Feed Rate Feed X-axis: 32 m/min Feed Y-axis: 40 m/min Feed Z-axis: 40 m/min Feed A/C-axis: 12,000°/min (equals 33.3 rpm at max. 500 kg) Feed A/C-axis: 18,000°/min (equals 50 rpm) MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,550 x 3,200 x 2,900 mm Machine weight: 16,000 kg Operating Hours (as of 30.04.2025) Power-on hours: 41,624 h Operating hours: 21,877 h Machining hours: 16,829 h Spindle hours: 21,109 h EQUIPMENT - Chip conveyor - Paper band filter - Bed flushing - Electronic handwheel - 6 Parotec pallets 398 mm x 398 mm - 1 Pre-pallet Parotec for Erowa ITS 398 mm x 398 mm - Extensive Fanuc control options - Machine documentation - Marposs infrared probe - Preparation for oil mist extraction - Blum laser tool measurement - Work area flushing - Hand rinsing gun - External coolant with 3 nozzles, 7 bar - Internal coolant 15 bar - Coolant temperature control - Internal & external air supply

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460043, Technical specifications: # Machining workspace: X 300 mm; Y 500(725) mm; Z 375 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis A (rotary table) and 2 rotary axes B (indexing divider head) with direct angular measurement system, max. rotational speed 50 rpm, accuracy ± 5" # Max. clamping/part size: Ø 575 x 830 mm; max. weight 360 kg # Rapid traverse speeds: X/Y/Z – 65/75/75 m/min; positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm Nodpfxjxwvr Is Aa Eelk # Spindle speed: 1–17,500 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tool positions / chip-to-chip average 2.5 sec # Maximum tool size: Ø75 mm / length max. 275 mm / 7.5 kg Electrical connection: # Voltage: 3x400V / 50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Required installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # Oil filtration system max. 80 bar: Knoll 550 K-1 450_2450 (can serve two machines simultaneously) # Cooling system for spindle, guideways, and control cabinet # 2 oil lubrication systems # Oil vapor extraction/recovery unit: IFS Vario E2000 (2,000 m³/h) # Fire suppression: Kraft & Bauer # Part presence detection: pneumatic detectors (low pressure) # In-process measurement: Marposs T25 # Tool breakage monitoring and length check: inductive sensor # Tool holder detection in spindle # Documentation: operating manuals only Machine condition: Operational / In production

Condition: used, _____ Description: Year of manuf. : 2020 Control : Sonstige WEISS CNC Centre width : 6 mm In Generel: ear of construction:2020 Control system:WEISS CNC Centre width:6 mm Centre height:200 mm Grinding wheel dimensions:400x60 mm + 0x60 mm Workpiece headstock: Speed:1 rpm Workpiece weight max.:25 kg Sanding diameter max.:390 mm Mounting:MK4 Grinding headstock: Peripheral speed:2 m/s Nodpjv Armcefx Aa Eelk Grinding disc dimensions right:0 x 60 mm Grinding disc dimensions left:400 x 60 mm X-axis:380 mm Z-axis:1,1 mm B-axis:torque motor, infinitely variable Tailstock: Pinole diameter: mm Pionole stroke:45 mm Mounting:MK 4 Cylinder fine adjustment:+/- 0.04 mm Equipment: Positioning sensors:Direct scales Grinding spindles:2x grinding spindle (left/right) GAP / Crash Controll:Structure-borne sound (Sensotronik) Balancing:MPM balancing device Workpiece measurement:Marposs PF ME Automation:Robot interface prepared Set-up mode:Electronic handwheel Emulsion mist separator:Mechanical Dresser:For external grinding wheel left/right Accessories:Various grinding discs + flanges

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 3025180903, center height: 180 mm, workpiece weight (max.): 150 kg, grinding length: 600 mm, grinding diameter: 355 mm, spindle speed (max.): 1,000 rpm, TECHNICAL DETAILS Grinding diameter: 355 mm Grinding length: 600 mm Center height: 180 mm Max. workpiece weight: 150 kg Speeds Workpiece spindle, stepless: 0 – 1,000 rpm MACHINE DETAILS Nledpjwm Hr Tjfx Aa Eok Total power requirement: 30 kW Approx. machine weight: 7 t EQUIPMENT - CNC precision cylindrical grinding machine with mobile control and operating panel - Marposs P5 measuring device - Industrial filter mounted - 2-way portal robot for automatic loading

Year of construction: 2001, condition: used, turning diameter:670 mm turning length:3000 mm control:840 z-axis:3150/3000 mm y-axis:-125/+175 mm x-axis:700/260 X+ mm c-axis:0,001 ° main gear-box motor:60/40 kW spindle turning speed range:2600/3300 U/min spindle diameter in front bearing:160 mm Spindle bore:115 mm lower slide:2 x 12, VDI 40 mm upper slide:25 kW no. of tools in the magazine:90 Stück workpiece length:900 mm tool taper:HSK 100 / VDI 40 Nsdpfx Aslqaffja Eolk rapid traverse::15/20 m/min total power requirement:140 kW weight of the machine ca.:35 t dimensions of the machine ca.:13 x 4,5 x 3,6 m CNC TURNMILL center with opposed spindles and 2 saddles, used for Alu operation only - SIEMENS 840 C control for 8 axis - Left/Right spindle with C-axis, KNCS 400 mm power chuck - Lower saddle with 2 x 12-fold revoving heads - Turning.- boring,- milling unit on top saddle, HSK 100 tool taper, 25 kW drive motor, 10-4000 r/min, B and Y axis - Coolant device with 80 bar and rotating filtering, coolant liquid cooler, oil mist exhauster - MARPOSS Workpiece measurring device - Chip convyor, complete splash housing with sliding doors

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your is: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung: -WSS mit Konus MK5, optional mit Adapter MK5/Kurzkegel -RST mit MK4 Konus. Optional mit Feinverstellung -Schleifspindelstock T1/T2/T3 -T1 Schleifscheibendurchmesser 400mm -T2 Schleifscheibendurchmesser 300mm -T3 Innenschleifeinrichtung riemengetrieben. -Schleifspindelmotor 4,4kW -B-Achse hochauflösend -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs -GAP Control (Sensor am Schleifspindelstock) Nledouwv H Topfx Aa Eek Optionen gegen Aufpreis: -HF Innenschleifspindel -Hochgenauer, höchst kippsteifer Werkstückspindelstock -Messteuerung Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Year of construction: 1971, condition: ready for operation (used), machine/vehicle number: 713406, -KOM 105- Offered here is a grinding machine from the company Kehren & Co with a filter system from the company FAUDI. This is a segment grinding machine with vertical grinding spindle. The machine has 2 grinding tables/magnetic plates for pendulum machining. Technical data: Grinding machine: Manufacturer: Kehren & Co Type: D7B Year of manufacture: 1971 Make No: 713406 Nlsdpsg Nt A Ejfx Aa Eek 2 grinding tables/ magnetic plates with 700mm diameter. Grinding method: segment grinding Control: Marposs weight: 6.600kg Filter system: Manufacturer: Faudi - Filtersystems Type: AFB 1,3 / 1001 Year of manufacture: 1992

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-09, Technical Characteristics: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + rotary table axis A and 2 rotary axes B, equipped with an index divider head with direct angular measuring system, max. rotation speed 50 min⁻¹, accuracy +/- 5" # Axis A swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max. tool diameter: Ø 82 mm / max. length 250 mm / max. weight 5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Total installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment Includes: # CNC control: Siemens 840D Power Line # Chip extractor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, up to 80 Bar: Knoll HL 450/1200 # Cooling system for spindle, linear guides, and control cabinet Nsdpoxwmvkofx Aa Ejlk # 2 independent oil lubrication systems # Oil vapor extraction/recovery system: LTA AC3002 # Fire suppression system: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process measurement: Marposs T25 # Tool breakage detection: Blum Novotech # Tool holder detection system in spindle # Documentation: incomplete Machine Condition: NOT OPERATIONAL # Hydraulic oil leakage at Peiseler rotary table # New hydraulic pump available in stock

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your is: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung: -WSS mit Konus MK5, optional mit Adapter MK5/Kurzkegel Nsdpeuwv H Hjfx Aa Eolk -RST mit MK4 Konus. Optional mit Feinverstellung -Schleifspindelstock T1/T2/T3 -T1 Schleifscheibendurchmesser 400mm -T2 Schleifscheibendurchmesser 300mm -T3 Innenschleifeinrichtung riemengetrieben. -Schleifspindelmotor 4,4kW -B-Achse hochauflösend -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs -GAP Control (Sensor am Schleifspindelstock) Optionen gegen Aufpreis: -HF Innenschleifspindel -Hochgenauer, höchst kippsteifer Werkstückspindelstock -Messteuerung Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Year of construction: 1964, condition: used, -WKG 429- Offered here is a grinding machine from the company Naxos Union. This is a vertical rotary table surface grinding machine with 2 vertical grinding spindle units. Technical data: Nedjg Nt Dbjpfx Aa Eolk Manufacturer: Naxos Union Type: FRDA 600/1000 Year of manufacture: 1964 Rotary table: Ø 1100mm grinding wheels Ø: shrink head 475/254 Grinding wheels Ø: finishing head 457/357 Weight: 8t Grinding method: segmental grinding Segment grinding heads: 2 pieces Accessories: Dressing device Water box with paper belt filter Marposs control

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15KX239200001, Technical specifications: Work Area - Maximum turning diameter: 210 mm - Maximum machining diameter: 200 mm - Maximum workpiece length: 220 mm - X1/X2 axis travel: 220 mm / Rapid traverse in X: 24 m/min - Z1/Z2 axis travel: 220/770 mm / Rapid traverse in Z: 36 m/min - Y1/Y2 axis travel: +/-40 mm / Rapid traverse in Y: 12 m/min Automation: - Axis strokes: X - 210 mm; Y - 680 mm; Z - Left 2080 mm / Right 3360 mm; α 270˚ - Maximum speeds (m/min): X - 35; Y - 120; Z - 160; α 270˚/1.5 sec Nledpexwuhuofx Aa Esk - Load/unload gripper specifications (pneumatically powered): Outer diameter up to Ø170 mm; jaw stroke 30 mm; gripping force: external 128 kgf / internal 138 kgf Main Spindle: - Spindle nose: A8 - Maximum speed: Left 5000 rpm / Right 5000 rpm - Power at 100% duty cycle: Left - 15 kW / Right - 7.5 kW - Bar capacity: left spindle - 65 mm / right spindle - not available Tool Turret with Driven Tools: - Tool interface: BMT55 - Number of positions: 15 upper / 12 lower station turret, all driven positions - Maximum speed: 4500 rpm; Milling motor power: 4.5 kW Electrical Equipment: - Operating voltage: 200V, 3-phase, 151A fuse - Connected load: 55 kVA Dimensions: - Machine dimensions (L×W×H): 3200 × 2200 × 3500 mm - Weight: 10,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip removal, gantry loading/unloading from conveyors - Automation includes: Gantry robot + 2 loading/unloading conveyors - CNC control: Fanuc FS31i Model A Series - Chip removal conveyor - Coolant filtration 40 bar max: Filber S.L. FTH5/10, 200 l/min - In-process control: Marposs T25 - Broken tool detection system: Peek tool menu Murata/Fanuc feature enabled - Part detection through spindle: Low pressure compressed air sensors - Bar feeder interface max Ø65 mm - Documentation: Electronic and hard copy available Machine condition: OPERATIONAL

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds Njdeuxfu Nspfx Aa Ejlk - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460042, Technical Specifications: # Machining Area: X 300 mm; Y 500(725) mm; Z 375 mm # Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexable divider head, featuring direct angular measuring system, rotational speed up to 50 min⁻¹, accuracy +/- 5” # Maximum Part Clamping Dimensions: Ø 575 x 830 mm; Maximum weight 360 kg # Rapid Traverse Rate: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance Between Spindles: 300 mm # Spindle Speed: 1-17,500 rpm Nlsdpfx Aaexwvlnj Eok # Spindle Taper: DIN69893-HSK-A63 (with internal coolant) # Automatic Tool Changer: 2 x 32 tool positions / chip-to-chip average 2.5 seconds # Maximum Tool Diameter: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Installed Power: approx. 85 kVA / 125A Dimensions: # Installation Footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment Includes: # CNC Control: Siemens 840D SL # Linear Axis Measuring System: Heidenhain linear scales # Chip Extractor: Knoll Type 550 K-1 # Oil Cooling System # Oil Filtration System, max 80 bar: Knoll 550 K-1 450_2450 (can serve 2 machines simultaneously) # Shaft, Guideways, and Switchboard Cooling System # 2 Oil Lubrication Units # Oil Vapor Absorption/Recovery Unit: IFS Vario E2000 (2,000 m³/h) # Fire Suppression: Kraft & Bauer # Part Presence P/Y: low pressure air detectors # In-process Gauging: Marposs T25 # Tool Breakage Detection System: BRK and length check via inductive sensor # Tool Support Detection System in Working Spindle # Documentation: Only manuals available Machine Condition: Fully operational

Condition: used, Year of construction: 2005, grinding diameter 500 mm grinding length 1500 mm centre height 250 mm Control GRINDplusIT Maschine wird teilüberholt mit Messprotokoll und Gewährleistung innerhalb Deutschlands und Anrainerstaaten geliefert. Nsdpowulrhsfx Aa Eolk 1 UR-RS 175 / 1500 standard version (T1, T2, T5, T7) 1 grinding wheel set T1 400x63x127mm 1 grinding wheel set T2 400x63x127mm 1 grinding wheel set T5 400x63x127mm 1 internal grinding device T7 0120 mm for HF spindles 1 centre height 250 mm 2 grinding head motor: drive power 10.0 kW 1 CNC control Heidenhain GRINDplusIT 1 Kel-ASSIST 100 PLUS (includes Kel-Assist 100 and thread calculation) 1 KEL-POLY, out-of-round grinding 1 KEL-NET for CNC control GRINDplusIT 1 B-AXIS GRINDplusIT: ‘CNC-controlled B-axis’ (standard) 1 GRINDplusIT: v constant 35m/s or 45m/s_adjustment of grinding spindle via control 1 T1, T2, T5, T7: T1 and T2: v=constant, T5: v=variable (Danfoss), T7: HF spindle 1 operating unit for 1x MFM or MFV spindles, VACON 22kW 1 x HF internal grinding spindle Fischer MFM 1224/42/31 re. HJND 21 1 x HF internal grinding spindle MFV 1260/4 re 1 x HF internal grinding spindle IBAG HF 33 S 60 P 1 tailstock with manual retraction 1 MICRO-ADJUSTMENT: tailstock lower section with micro-adjustment 1 spring-loaded quill insert 1 pneumatic relief for the tailstock 1 upper table flooding (standard) 1 reinforced workpiece spindle MK 5 DIN 55026 size 5’ 1 C-AXIS: CNC-controlled C-axis to workpiece spindle box reinforced 1 lower part FIXED for the workpiece spindle box reinforced 1 KELPOS: Active longitudinal positioning MOVOMATIC, mounted on the grinding head 1 diameter measuring head Movomatic; DU200 1 measuring control unit Movomatic ES124 / digital 1 KELSET: KELSET tool measurement system, MARPOSS 1 Basic module for KEL-TOUCH cut-off sensor and KEL-BALANCE balancing device 1 KEL-TOUCH, cut-off sensor for diagonal/tandem 1 Full emulsion enclosure 1 Coolant cleaning gun connected to the table 1 Emulsion grinding mist extraction system 1 lubricant for initial filling HF dressing device type IBAG on OT Data from state of delivery without guarantee

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm Nlsdpfx Aaoxwl Tzj Esk - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm weight of the machine ca. 3 t High-End Kellenberger 1500U Ideal for spindle producer or overhauler -BEMA Internal grinding device with separate, cooled motor. Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when it is in position. A quantum leap in safety -Infinitely variable grinding spindle speed 1000-1500 rpm -Infinitely variable internal grinding spindle speed 0-100%. -Digital display of grinding spindle speeds -Swivelling angle display top table -swivel angle display grinding headstock -Marposs gaper sensor for external grinding only -fluid gating sensor Marposs internal grinding -Center height up to 250mm possible Machine is already delivered. Identical machine can be built with additional Nlodpfxot Ii Rrj Aa Esk with additional options. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg Nljdpfoxwlmuox Aa Eok - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: used, grinding diameter 250 mm grinding length 1000 mm centre height 125 mm grinding wheel diameter 500 mm grinding wheel width 80 (100) mm bore 203,2 mm MK5 work piece spindle speed 20-400 U/min workpiece spindle swivable +/- 360 ° Nedpfod Ih Egox Aa Ejlk grinding head swivellable +/- 0 ° 0-9,99 mm/Ø 0-9,99 mm/Ø table swivelabel +/- 10 ° table speeds 0,02-6 m/min 130 kg max. workpiece weight -without tailstock 130 inkl. Spannung kg cross travel 270 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 5,5-7,5 kW weight of the machine ca. 2,7 t As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. delivery: completely overhauled including a new control Examples: Accessoies: - Marposs auto-sizing-attachement - Balancing for the wheel. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Njdpfoxwl N Asx Aa Eslk Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: used, Year of construction: 2010, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Fanuc 310is Completely machanically overhauled with grinding process and setup of one part. Original photo taken on the EMO 2010. CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Cooling lubricant switch-off for table devices Full casing emulsion Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for arobo bezel Nodpfxevdk N Es Aa Ejlk

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with Nsdpjuxfucsfx Aa Eelk integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...