Used Marposs for sale (109)

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Bcjdpfx Afsxwl Tzo Esu Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: Bcodpfxexwlmuo Af Esu - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D Bsdpfx Asxwl N Ajf Escu - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: good (used), Working wheel dimensions (od x id x width) Ø610x80xØ304.8 mm Brand CNC FANUC Model CNC 21 Oi TB Maximum length between points 1060 mm Max. travel Z axis 750 mm Max. length to be ground 600 mm Point height 225 mm Ø min/max to be ground 10 - 300 mm Max. weight of the piece 125 Kg Max. travel X axis 325 mm Grinding wheel speed 45 m/s Main motor power 11 Kw Working head speed 30 to 1000 rpm Working head cone MORSE 5 Working head motor power 12 Nm Tailstock cone MORSE 4 Tailstock quill travel 70 mm Tailstock hydraulic movement 150 mm Total power 22 Kw Length 2300 mm Height 1900 mm Width 2634 mm Weight 7750 Kg Accessories Cooling equipment with paper filter; MARPOSS meter, positioner and balancer; Bcsdjtrgugjpfx Af Eeu

Condition: excellent (used), Year of construction: 2007, operating hours: 2,000 h, functionality: fully functional, turning diameter: 200 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 150 kg, overall weight: 5,200 kg, • Type: AWH 600 Machine Model: PMT AWH CNC Bodpfx Afjvwz Ule Eocu • Manufacturer: PMT Mascines LTD • Year of manufacture: 2007 • Live viewing available: YES • Condition: Good condition, ready to work • Automatic Marposs stone balancing, Automatic Marposs measurement Basic data of the machine: Maximum grinding diameter: 250 mm Maximum grinding length: 600 mm

Condition: good (used), Year of construction: 2002, LANDIS 3SE 14"x 60"ANGLEHEAD CNC GRINDER REBUILT BY LANDIS & TOOLED 2002 Equipped with: NEW FANUC CONTROL 2007 2-Axis Template Truform Servo Step Profile 30 Degree 30" Wheel Dead Headstock Table Traverse Marposs E39 Marposs Table Gauge Lateral Locator 3-Gauge TIR Gauge Steady Rests Wheel Balance Servo Motor-Traverse Stepping Motor Mist Collector Specifications: Swing: 14" Center Distance: 60" Motor: 1200 rpm Motor Pulley Diameter: 7.031" Spindle Pulley Diameter: 6.5" New Wheel Diameter: 30" Worn Wheel Diameter: 22" Max. Wheel: 8500 sfpm Max. Workhead: 333rpm X-Axis Ball Screw Pitch: 5mm per rev. X-Axis Total Stroke: 14.74" X-Axis Motor Pully Wheel Feed Diameter: 3" X-Axis Ball Screw Pulley Diameter: 3" Z-Axis Ball Screw Pitch: 10mm per rev. Z-Axis Total Stroke: 72.88" Z-Axis Motor Pulley Diameter: 3" Z-Axis Ball Screw Pulley Diameter: 6" Total Stroke: +/-2mm Total Marposs Voltage Output: =/-10vdc Bcedpertr Eaefx Af Eeu Dresser One Revolution of the Stepping Motor: .045" Diamond One Revolution of the Stepping Motor: .005" Weight: 25,000 lbs.

Condition: good (used), Year of construction: 2013, TOYODA (JTEKT) GL32M-63 CNC UNIVERSAL CYLINDRICAL GRINDER Equipped with: CBN Grinding Wheel Flagging Steady Rest Workhead Mounted Rotary Dresser Marposs P3SE System Monitoring Toyoda In Process Gaging Marposs E20N Acoustic Controller Air Gap Eliminator Workpiece Collision Control Coolant Pumps W/Magnetic Separator Pendant Control RH Workhead with Center LH Workhead with Center Work Rests Worklight Light Curtains Stacklight Extra Wheels Specifications: -Grind Center to Floor: 1,000 mm -Swing Over Table: 320 mm -Distance Between Centers: 630 mm -Grinding Diameter Range: 10 - 150 mm -Floor Space (Base machine w/auxiliary equipment): 3,400 x 5,000 mm -Net Machine Mass (approx.): 10,500 kg Grinding Wheel: Bcodpfxortrzps Af Eou -Type: CBN Wheel -Wheel Size (OD): 350 mm -Maximum Wheel Width: 60 mm -Surface Speed: 120 m/s Wheelhead: -Spindle Bearing: TOYODA STAT Bearing -Slide: V and Flat -Feed System: Ballscrew -Rapid Feed (on diameter): 30 m/min -Minimum Incsrement (on diameter): 0.0001 mm Workhead: -Type: Dead Spindle -Work Speed (Max): 500 rpm -Center Taper: MT #4 Footstock: -Type: Hydraulic -Taper Compensation: Manual -Maximum Center Retraction: 60 mm -Center Taper: MT #4 Motors: -Wheel Drive Motor: 15 kW, Belt-Drive -Wheelhead Feed Servomotor: 1.3 kW Tank Capacities: -Wheel Spindle Lubrication Oil: 80 L -Hydraulic/Lubrication Oil: 20 L

Condition: good (used), Year of construction: 2011, LANDIS LT-2 TWIN WHEEL CNC ORBITAL CRANK GRINDER Equipped with: Landis 6400 CNC Control Siemens TOUCH HMI Arobetech Steady Rest Marposs P7 Gage System Lateral Locator Twin CBN Grinding Wheels Rotary Dresser Headstock Tailstock Rittal AC Units Specifications: Bcsdpfertrxxsx Af Esu Maximum Center Distance: 680 mm

Condition: good (used), Year of construction: 2011, CNC 235 BUDERUS HARD TURNING/GRINDING CENTER, 2011 Equipped with: Main Spindle 2-I.D. Grinding Spindles 8 Position Turret Siemens 840D Control Hydraulic Chucking Rotary Dresser Chip Conveyor Gantry Loader Marposs E9066M Hydraulic System Chip Bucket Fire Suspension Sysem Chiller Bcodjrtryyepfx Af Eeu Specifications: Number of Main Spindles: 1 Maximum Work Part Diameter: 200 mm Maximum Part Length: 150 mm Maximum Number Machining Station: 4 Rapid Feed/Speed X/Z: 90/30 m/min

Condition: good (used), Digital display, length measuring system, length measuring device, linear scale, positioning display, digital scales, linear encoder, linear encoder, positioner, Balluf switch, position switch Bcsdpfx Ajw Act Ejf Esu -Manufacturer: Marposs, Balluf-Switch Positionnar -Type: 34 Measuring length: 80 mm -Dimensions box: 300/200/H100 mm -Weight: 1.9 kg

Condition: ready for operation (used), Overbeck / Marposs 6830219002 Operator Panel, used, minor signs of wear, 100% functional Bcjdoi Eccbopfx Af Eou

Condition: ready for operation (used), Marposs 6307000701 stepper motor control, used, normal signs of use, 100% functional Bcedpfx Afsi Eb Axs Eou

Condition: ready for operation (used), Marposs 6320600900 CPU Board, used, normal signs of use, 100% functional Bcedpsi Eb A Aofx Af Esu

Condition: ready for operation (used), Marposs-Prodar 6330320200 Operator Panel, used, minor signs of wear, 100% functional Bcodpfx Afsi Eb A Ho Eeu

Condition: ready for operation (used), Marposs 6840015704 card SN:22415-32436, used, normal signs of wear, 100% functional, delivery scope as per photos. Bcodox Et Huopfx Af Esu

Condition: ready for operation (used), Marposs 6840021303 / E348 CPU M12 486 SN:25001-24555, used, normal signs of wear, 100% fully functional, scope of delivery as shown in photos. Bedpfx Afjx Et H Io Eecu

Condition: ready for operation (used), Marposs E5N 8087240510 control unit SN:0DC3667, used, normal signs of wear, 100% functional, delivery as per photos. Bcodpfx Afex Et H Uj Eju

Condition: ready for operation (used), Marposs 6840015704 card SN:22415-32658, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bodpfx Afex Et Hzo Eocu

Condition: ready for operation (used), Marposs power supply, used, normal signs of wear, 100% functional, scope of delivery as per photos. Bsdpox Et Ifofx Af Eecu

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, Measuring computer Metrel (now Marposs) including measuring probes (3TL + 4x short + 12x long) removed from measuring device including 2x probe boxes and 2x control panels 2nd measuring computer available on request, but some components removed, not functional Bodpjvl Eurefx Af Eocu But with Metrel control cards

Condition: used, Year of construction: 2010, max. wheel diameter 180 mm gear width 40 mm max. module 4 min. module 1 M62 is a manually operated go/no go measuring station for checking the usual gear parameters on gear wheels. Due to the high-precision measuring tools and its robust design, the M62 Flex is ideal for monitoring the quality of gears under workshop conditions during production. M62 provides an accurate and robust solution for quick inspection ofgear teeth after machining, such as hobbing, shaving, grinding and honing on the production line. MARPOSS Industrial PC E9066 N with WINDOWS XP with 15" LCD display with 8 or 12 measuring ports for connecting 12 measuring sensors. Bcsdpfxevzh Nqs Af Eju Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), AEROEL 290D2B0 XLS 40 Laser Scan Micrometer Tabletop Laser Micrometer Measuring field (vertical): 40 mm Measurable diameters: from 0.06 mm to 38 mm Resolution (selectable): 10 µm / 1 µm / 0.1 µm / 0.01 µm Linearity accuracy (centered): ±0.5 µm for Ø ≤ 25 mm (up to ±0.75 µm for Ø up to 38 mm) Linearity (within the measuring plane): ±0.5 µm Lateral linearity (per mm deviation): ±0.5 µm/mm Repeatability (T = 1 s, ±2σ): ±0.07 µm Bodpfx Asw Et Avjf Eocu Beam spot size (elliptical): approx. 0.08 × 2 mm (Model A) or 0.06 × 0.1 mm (Model B) Scan frequency: approx. 1,500 Hz Scan speed: approx. 300 m/s Thermal coefficient (with “NO-VAR” option): approx. −11.5 µm/mm °C Power supply: 24 V DC, 0.3 A (1 A peak current) Laser source: VLD (Visible Laser Diode), wavelength λ = 650 nm Dimensions (L × W × H): approx. 500 × 134 × 68.5 mm Weight: approx. 4.2 kg Operating temperature: 0 °C to +50 °C (storage temperature −20 °C to +70 °C) Max. operating altitude: up to 3,000 m above sea level Technical description adopted as provided. You are welcome to arrange an inspection. We can arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. The specified company names and trademarks are the property of their respective owners and are used solely for identification and product description purposes. Technical data and item descriptions may be subject to change or error and are reserved.

Condition: new, Dittel Marposs WB HEAD-ST50X120 / FC NP TF 0950 / O3PL2024504 Electromagnetic built-in balancing head, SN:O14LW1379, unused, 100% functional, scope of delivery as per photos Bjdpfx Afoi D Upvo Eocu

Condition: new, Dittel Marposs WB HEAD-ST50X120 / FC NP TF 0950 / O3PL2024504 Electromagnetic built-in balancing head, SN:O14LW1381, unused in opened original packaging, 100% functional, scope of delivery as per photos Bedpoi D Upyjfx Af Escu

Condition: new, Dittel / Marposs O3PL0054004 ( F22028 ) WB-Stator-SP64 DSG CV 5,0 SN:O19LV1960 ,unused, 100% functional, scope of delivery acc. photos Bsdpfelcf Rmex Af Ejcu