Used Manual Edm Machine for sale (98,313)

Condition: like new (used), Year of construction: 2011, operating hours: 200 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 300 mm, workpiece weight (max.): 180 kg, total height: 1,967 mm, type of input current: AC, total width: 981 mm, total length: 1,047 mm, travel distance X-axis: 410 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 310 mm, overall weight: 410 kg, input voltage: 230 V, table width: 624 mm, table length: 805 mm, table load: 180 kg, compressed air connection: 4 bar, ambient temperature (max.): 30 °C, ambient temperature (min.): 15 °C, Equipment: documentation/manual, type plate available, Mitutoyo Crysta-Plus M443 Coordinate Measuring Machine with HP workstation and monitor Year of manufacture: 2011 Very little used, excellent condition Thanks to its integrated thermal error compensation, the Crysta-Plus M443 can also be used outside of a thermally stable measuring room within a temperature range of 15 to 30 °C. X-axis: 400 mm Y-axis: 400 mm Z-axis: 300 mm Accuracy (ISO 10360): E = 3 + 0.4 L/100 µm within a temperature range of 15 to 30 °C Resolution: 0.0005 mm Probe head: Renishaw MH 20i + PS12R Measuring table: Granite 624 mm x 805 mm Pneumatic axis clamping for each axis, additionally operable via foot switch Workpiece clamping: threaded insert M8, 13 positions Distance between columns: 625 mm Maximum workpiece height: 400 mm Maximum workpiece weight: 180 kg Machine weight: 480 kg Recommended installation area (incl. PC): 2.5 x 2.5 m Extensive accessories, e.g. probe heads, master ball The machine is operational and can be inspected and tested on site. Dksdpjxmhw Isfx Ahusw Packaging costs: Wooden crate, suitable for international shipping €800.00

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dkjdewhf Hfspfx Ahusw Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: excellent (used), Year of construction: 2017, travels: x 400 mm y 300 mm z 220 mm Wear-free tubular direct drive Water bath incl. cooler Automatic wire threading Dedpfx Asm Uyuxjhuskw

Condition: like new (used), Year of construction: 2022, Electrodes: Diameter from 0.3 mm to 3 mmSpindle head Z-axis travel: 280 mm7J axis spindle travel: 380 mmSingle-channel electrode length: 400 mmMaximum spindle feed rate: 1500 mm/minWorktable dimensions: 440 mm x 320 mmManual X and Y axis travel: X = 400 mm, Y = 300 mmMaximum distance between guide and table: 300 mmMaximum current: 30 ASpindle rotation speed: 0–200 rpm (adjustable)Maximum power: 4 KWPower supply: 380V / 50 HzAxis readout: 3 axesWater pressure: 8 MPaMaximum table load capacity: 380 KGWorking fluid: Deionized waterWater tank with pump: Electric pump includedIncluded accessories: Chuck, 2 guides (0.5 mm and 1 mm), sealing joints, single-channel electrode tubes The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change. Dodswnffnspfx Ahuskw

Condition: good (used), Year of construction: 2006, 2-component silicone system Swivel arm length: 2200 mm Width: 1180 mm Depth: 1000 mm Height: 2450 mm with swivel arm removed Dedpfx Ahoxatvisuekw Weight with barrel: ca. 450 kg

Condition: good (used), Year of construction: 1980, Travel X/Y/Z 350/250/300 mm, table size 480x360 mm, table - quill 450 mm, max. power 40 A; 4,8 kw; DRO Heidenhain, wire control system 3R, working hours 21383 h Dodpfx Aoiv H Egjhuokw

Condition: used, Year of construction: 2015, functionality: fully functional, Machine decommissioned due to purchase of a new one. Dkodpfjxnpmgjx Ahujw

Condition: used, Inverter Welding Machine for Manual Metal Arc Welding TECHNOLIT PROFImat 170 Plus Type MMA Welding Machine, Inverter Welding Machine, Manual Electrode Welding Inverter New – unused Serial No.: TB1703500316 Article No.: 440030 Year of Manufacture: 2022 TIG (DC) Output: 170 Amp. 45% duty cycle 150 Amp. 60% duty cycle 135 Amp. 100% duty cycle Dkodpfx Aji E Iz Ijhusw MMA Output: 170 Amp. 35% duty cycle 145 Amp. 60% duty cycle 125 Amp. 100% duty cycle Adjustment Range: 5–170 Amp. infinitely variable Power Supply: 230 Volt, 50 Hz - Hot start function (optimizes ignition characteristics, making it easier to start welding with difficult-to-ignite electrodes) - Anti-stick function (optimizes electrode control and prevents the electrode from sticking) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition - Suitable for stick electrode welding, for all electrode types up to Ø 4 mm - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Equipped with 230-volt Schuko plug - S-mark for welding under increased electrical hazard conditions - Overvoltage protection Dimensions (machine without cables) L x W x H: 310 x 155 x 265 mm Weight (without cables): 7 kg NEW – unused, from stock

Condition: used, Year of construction: 1995, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, total height: 2,230 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 400 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,500 kg, Charmilles Robofil 310 Year of manufacture: 1995 Travel paths (X/Y/Z): 400 x 250 x 400 mm Travel paths (U/V): 400 x 250 mm Taper angle: +/- 30° at 400 mm height Max. workpiece dimensions (width x depth x height): 850 x 500 x 400 mm Max. workpiece weight: 1000 kg Collision protection on X/Y/U/V/Z axes Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2230 mm Dodpfjw Hxqnjx Ahuekw Machine weight: 2500 kg The machine was in operation with our customer until recently and is available immediately.

Condition: defective spare-parts repository (used), Year of construction: 1995,  Machine with breakdown (unknown) proposed for spare parts. Dkedpowzifxsfx Ahujw

Year of construction: 2012, condition: ready for operation (used), General Data Measurements width 1850 mm Measurements depth 1300 mm Measurements height 2500 mm Machine weight 1540 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 250 mm Table Table load 400 kg Additional Equipment Max. Electrode Weight: 80 kg This 3-axis AgieCharmilles CABINET FORM20 die-sinking EDM machine was manufactured in 2012. Ideal for precision mold making and tooling applications, it offers robust performance and reliability. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles CABINET FORM20 machine we have for sale. Contact us for more information. Dodpfx Ahswpm Awoujkw Application Types EDM

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: ATH ADV 3 with C AXIS, workpiece weight (max.): 2,000 kg, input frequency: 50 Hz, positioning accuracy: 0.005 mm, Description AGIE ADVANCE 4 Travel/ races (X/Y/Z) 550 x 350 x 400 mm Max. Workpiece dimensions 920 x 750 x 370 mm Surface support 870 x 550 mm Max. workpiece weight Workpiece weight (without bath) 2000 kg Max. electrode weight Electrode weight 80 kg Table/quill distance min. 215mm Max table/keel distance. 615mm Quill stroke 400 C-axis Integrated, 0 - 55 rpm Generator power 60 A Dielectric integrated Details • X axis:550 mm • Y axis:350 mm • Z axis:400 mm • C axis: Yes • Max workpiece length: 920 mm • Max workpiece width:750 mm • Max workpiece height: 370 mm • Max workpiece weight: 2000 kg Conditions and size • Status:Visible • Condition: Good Dkedpfx Ahjv Rftlouew • Length:2050mm • Width:1800mm • Height:2868 mm • Weight:4200 kg Make offer / Make offer

Condition: used, Year of construction: 2000, functionality: unexamined, Decommissioned machine due to the purchase of a new one. Dkodjxnpkxjpfx Ahuow

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. Dkedpfx Aovg Rh Tshuow This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 2,180 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 200 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,190 kg, Charmilles Robofil 290P Year of manufacture: 2001 Travel distances (X/Y/Z): 400 x 250 x 200 mm Travel distances (U/V): 400 x 250 mm Taper angle: +/- 30° at 200 mm height Max. workpiece dimensions (W x D x H): 850 x 500 x 200 mm Max. workpiece weight: 500 kg Programmable pressure levels Injection pressure upper nozzle: 0...11.5 bar Injection pressure lower nozzle: 0...11.5 bar Standard wire guides: 0.25 mm Djdpjw Htdpjfx Ahuskw Machine dimensions: 1800 x 1600 x 2180 mm Machine weight: 2190 kg The machine was in use with our customer until recently and is available for immediate delivery.

Condition: refurbished (used), Year of construction: 2001, NICE MACHINE REFURBISHED Dedpfx Asxc Elhehujkw

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 2700 mm Measurements depth 2550 mm Measurements height 2545 mm Machine weight 5500 kg Control Unit Brand FANUC Model PC Main Drive Number of axis 5 Movement X-Axis Movement 800 mm Y-Axis Movement 550 mm Z-Axis Movement 510 mm V-Axis Movement 550 mm U-Axis Movement 800 mm Dodpfx Ahexbum Eeuekw Workpiece Workpiece weight 3000 kg Media Power consumption 12 kVA This 5-axis AgieCharmilles FI 640 CC was manufactured in 2008, featuring a robust design with machine dimensions of 2550 × 2700 × 2545 mm and a weight of 5500 kg. It supports a maximum workpiece weight of 3000 kg and dimensions up to 1300 × 1000 × 510 mm. Equipped with collision protection and automatic wire threading, it's ideal for precise wire EDM tasks. Contact us for more information about this machine. Application Types EDM

Condition: repair required (used), Manufacturer: FANUC Tip: A04B-0221-B201 The condition of the machine is unknown, it does not work, it is for sale in this condition, !!! Dkedoik Hb Tjpfx Ahuew We do not know what is the probleme!

Year of construction: 1990, condition: ready for operation (used), With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible. Dodpfx Ahow S Tygjuekw

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium CNC Control Dkodpow D Accofx Ahujw Travel (X / Y / Z): 550 x 350 x 400 mm Travel (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes automatically lowering work tank (drop-door) Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed: 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of complete system: 2600 x 2600 x 2340 mm Total weight of system: 3300 kg The machine is cleaned, completely overhauled and tested for all functions after order confirmation. You receive a 6-month warranty on the machine. Commissioning service is available upon request.

Condition: good (used), Year of construction: 2004,   Chuck type: EROWA Electrode changer: X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): CNC Type: Worktank length: Worktank width: Worktank height: Table length: Table width: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight (kg): Max. machining current (A): Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change. Dodewtzdwepfx Ahuekw

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 3030 mm Measurements depth 2687 mm Measurements height 2150 mm Machine weight 3500 kg Main Drive Number of axis 5 Movement Dkedpjxfcpvefx Ahuow X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 310 mm V-Axis Movement 150 mm U-Axis Movement 150 mm Workpiece Workpiece weight 1500 kg Additional Equipment Cooling/Temperature Control: Cooling system with temperature regulation Generator: Transistor pulse generator Output Current: 50 A Generator Size: 600 x 650 x 1765 mm Generator Size: 600 x 650 x 1765 mm This 5-axis Mitsubishi MV2400S wire EDM machine was manufactured in 2015. It features X, Y, Z movements of 600 x 400 x 310 mm and U, V axes at 150 x 150 mm, supporting a maximum workpiece weight of 1,500 kg. Equipped with an advanced Mitsubishi M700 controller with 3D CAD/CAM capabilities, it ensures precise machining. Consider the opportunity to buy this Mitsubishi MV2400S wire EDM machine. Contact us for more information about this machine. Application Types EDM

Year of construction: 1995, condition: ready for operation (used), X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible. Dksdpfx Aow Sxx Iehuow

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total height: 2,220 mm, total length: 2,400 mm, total width: 2,800 mm, workpiece height (max.): 250 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, overall weight: 4,500 kg, AGIECUT Vertex 3 Year of manufacture: 2007 Dsdpfx Asw Dn Svshujkw Travel distances: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.33 mm Submerged wire EDM machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and extensively tested by us after receipt of order. Including user training at Techma on your refurbished machine Optional: Transport, commissioning, training, chiller

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 2,500 mm, total width: 2,500 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 900 mm, overall weight: 3,000 kg, The GF AgieCharmilles CUT 20P, manufactured in 2013, is a high-performance, precise used wire EDM machine specifically engineered for demanding applications in the metalworking industry. Thanks to advanced technology and intelligent control, the CUT 20P delivers outstanding cutting quality, minimal maintenance requirements, and excellent return on investment. Main Features & Advantages: ✅ Compact design: Workpiece dimensions: max. 900 x 680 x 250 mm Maximum workpiece weight: 400 kg Travel ranges X/Y/Z: 350 x 250 x 250 mm U/V: ± 45 mm Taper cutting up to ± 25° / 80 mm ✅ High-precision machining: Positioning accuracy via glass scales Automatic wire tensioning for consistently precise cuts Surface finish quality up to Ra < 0.25 µm ✅ Efficient wire system: Dedpsw Dn Rljfx Ahuekw Wire diameter: 0.15–0.30 mm Automatic wire threading and re-threading 25 kg wire spool for extended operating periods ✅ Intelligent control & user-friendly operation: Windows-based control system with intuitive user interface 15” LCD display for easy programming DXF import & 3D graphic check for precise simulations ✅ Reliability & low operating costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs due to robust construction and durable wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool & mould making ✔ High-precision components ✔ Series production & prototyping Achieve maximum productivity with the GF AgieCharmilles CUT 20P – The optimal choice for precise and cost-effective wire EDM! 📌 Our used machine from 2013 is professionally cleaned, overhauled, and thoroughly tested prior to sale in order to ensure the highest quality and reliability. 📩 Contact us for a tailored quote or to arrange a demonstration! We are also happy to offer commissioning and on-site training on the machine.