Used Manual Bending Machine Pan for sale (74,925)

Condition: new, Year of construction: 2009, 30 mm 30 mm L-beam 20 x 20 x 4 mm flat steel 25 x 6 mm Axis diameter 20 mm work speed 11 U/min total power requirement 0,2 kW weight of the machine ca. 80 Kg dimensions of the machine ca. 0,6 x 0,6 x 1,5 m Bledpfx Afsv Skzdjmep Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation

Condition: ready for operation (used), Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front Blodexacdvopfx Afmep * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 220692, Equipment: emergency stop, sheet width 1550 mm plate thickness 6 mm diameter of upper rolls 228 mm Blodpfszxt Txjx Afmep drive elektronisch zwei angetri

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode Bodpopgmqiofx Afmolp automatic mode: Close upper beam, bend set angle, open upper beam bending beam or upper beam manually adjustable according to sheet thickness adjustable opening width of upper beam backgauge manually adjustable CE standard documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm power: 3,0 kW weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, A NELA plate bending machine (printing plate bending device) is a professional bending device for offset printing plates, manufactured by the German company NELA Brüder Neumeister GmbH. These systems precisely shape printing plates into the required form, ensuring a perfect fit into the cylinders of offset printing presses. Blsdpfez It Skjx Afmjp Compatibility: NELA manufactures bending devices specifically tailored to the requirements of major printing press manufacturers. Models like the HD/Nela SM 102 B, which are optimized for Heidelberg Speedmaster (SM 52, SM 74, SM 102) as well as XL machines, are particularly common. A Heidelberg NELA plate punch (also called a printing plate punch, plate perforator, or hole punch) is an essential precision tool in prepress. It is used to punch register holes or cutouts precisely into offset printing plates. This ensures flawless clamping and perfect alignment (register) of the plates in Heidelberg printing presses. Compatibility: Specifically designed for Heidelberg machine series such as the Speedmaster (SM) 52, 74, and 102. Hole spacing: Flexible configurations with variable hole spacings, such as 425 mm and 780 mm (for Autoplate systems), are common.

Condition: used, Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Blodeg T S Tajpfx Afmop Wire feeder Clear text display Press force monitoring Wire straightening device Bosch stripping devices Holder and brush motor with integrated tool W32/1-32 Soundproof cabin Former for copper wire with stamped parts Control cabinet Technical data: Drive power: 7.5 kW Speed (min. - max.): 40 - 250 rpm Press force / punching unit: 200 kN Longitudinal feed: 250 mm Longitudinal strip width: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), pipe diameter (max.): 30 mm, input voltage: 380 V, Tube bending machine Brand: Margua Model: CEM-30 Bsdpfx Afoz Dti Iomelp Maximum bending capacity: 30 x 1.5 mm Maximum square tube capacity: 25 x 25 x 1.5 mm Maximum center radius: 115 mm Minimum inner radius: 25 mm Motor power: 4 HP (Three-phase 380V) Tube accessories: - Dies for 22mm tube - Dies for 28mm tube - Dies for 20.5mm tube Drive and control: Electromechanical with angle selector and mechanical stop. Bending system: Die-forming draw bending (with or without mandrel).

Condition: used, total length: 1,500 mm, total width: 1,400 mm, total height: 1,400 mm, Year of manufacture: 1980 Colour: Green Empty weight: 2.500 kg Price: On request - Year: 1980 - Documentation available: No - CE certificate present: No - Serial number: 802315 - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 5.5 - Shaft diameter [mm]: 105 Bodpszx Undofx Afmjlp - Moment of resistance [cm³]: 30 - Top roll diameter [mm]: 275 - Bottom roll diameter [mm]: 275 - Capacity diameter round [mm]: 60 - Options: Extra rolls - Transport dimensions: 1500mm x 1400mm x 1400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, Equipment: CE marking, documentation/manual, Ercolina Profiling Machine Model: CE40MR3 Year: 2002 Complete documentation Condition: Used, excellent condition, ready for use Included accessories: None Shaft diameter: 40mm Bjdo Af Iqdopfx Afmelp

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. Bjdpfx Aou Ibyyjfmelp The bending machine is movable/adjustable. Equipment/accessories: 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, bending force (max.): 42 t, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending force: 42 t Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Ram stroke: 300 mm Ram width: 200 mm Bedpfxjz Nipcs Afmolp MACHINE DETAILS Motor power: 4.0 kW Dimensions and weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Unladen weight: 1,000 kg EQUIPMENT Documentation CE marking

Condition: good (used), Press brake with a working length of up to 6.2 m Suitable for sheet metal up to 1.25 mm thickness Bsdpj Afw U Rjfx Afmolp With rear manual back gauge With roller cutter With Knauf profile head

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Drive type: electro-hydraulic Bsdpfxozzlc Re Afmolp Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: good (used), Year of construction: 2005, Technical data: Min. bending capacity steel: ø 19.8 x 3.0 mm Max. bending capacity steel: ø 76.1 x 3.0 mm Max. bending capacity stainless steel: 76.1 x 1.65 mm Bending radius: max. 150 mm Bending angle: max. 190° Bending direction: clockwise (right) Max. tube length: 6000 mm Adjustable control panel CE marking Dimensions (length x width x height): approx. 7200 x 2000 x 1650 mm Weight: approx. 3 tons Bsdpfx Afs Ahr T Remolp Accessories: Tools D 20 R 40 D 30 R 75 D 25 R 50 D 16 R 40 Condition: Very good condition, little used The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 28,250 kg, total length: 7,500 mm, total height: 3,470 mm, total width: 2,600 mm, working height: 1,100 mm, stroke length: 365 mm, type of input current: three-phase, pressing force: 320 t, input voltage: 400 V, working width: 6,000 mm, feed rate X-axis: 21 m/min, feed rate Y-axis: 8 m/min, back gauge speed R-axis: 250 mm/s, power: 37 kW (50.31 HP), oil tank capacity: 250 l, Equipment: CE marking, safety light barrier, Durma AD-R 60320 CNC press brake / panel bender For sale: a Durma AD-R 60320 CNC hydraulic press brake, manufactured in 2022. Well-maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Manufacturer: Durmazlar (Turkey) – Serial number: 73672218668 Year of manufacture: 2022 Bending capacity: 6,050 mm x 320 tons Stroke: 365 mm Dimensions: 7,500 x 2,600 x 3,470 mm (L x W x H) Weight: 28,250 kg Motor: 37 kW, three-phase, 400V, control voltage 24V Hydraulic oil tank: 250 l CNC touchscreen control with automatic bending sequence programming Complete with a full set of Eurostamp tooling: punch 1311 (full length 6,000mm), punch 1310 “goat’s foot” (4,000mm), dies 3077/3082, and Multi-V Includes an extra gripper for parts with a minimum length of 200mm, and vacuum suction cups for part handling CE marked, photoelectric safety barrier Bodpfsz E Sm Iex Afmelp For technical questions or to arrange a visit, please contact us by email – we will be happy to answer any question or send further photos/videos of the machine in operation.

Condition: used, plate width 1020 mm plate thickness 4 mm diameter of upper rolls 110 mm total power requirement 2,2 kW weight of the machine ca. 900 Kg Bedpfez N Hwqjx Afmjlp dimensions of the machine ca. 2,1 x 0,7 x 1,2 m Fasti three-roll plate bending machine / plate rolling machine In excellent condition. The machine was completely overhauled in 2016.

Condition: used, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Year of manufacture: 2025 Colour: Blue Empty weight: 800 kg Price: On request Control: Teach-in Blsdpfjztxnqsx Afmjp Motor power: 4 kW Press force: 28 metric tons Maximum stroke: 180 mm Table: 300 × 550 mm - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 - Control: Teach-in - Motor power: 4.0kW - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment Bodpfxjxacfgj Afmjlp * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition Bledepu R Nvepfx Afmsp

Condition: good (used), The system is open at the top. Blasting height: 1300 mm Width: approx. 1000 mm Height: approx. 2150 mm Depth: approx. 1400 mm Weight: approx. 1000 kg Bedpfxjxu Eycj Afmjlp

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Blsdpfx Afstr U Hlsmsp Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, side roll diameter: 90 mm, sheet thickness steel (max.): 3 mm, Equipment: swiveling upper roller, - Capacity 1050 x 3 mm - Roller diameter 90 mm - Conical bending - Swing-out upper roller Bedpfsq H D S Rsx Afmelp - Brake motor - Foot control - Emergency stop - Documentation - 400 V

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Year of manufacture: 2025 Colour: Blue Empty weight: 450 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Top roll diameter [mm]: 155 Bjdsztxn Ropfx Afmslp - Bottom roll diameter [mm]: 155 - Bending speed [mm/min]: 11 - Capacity diameter round [mm]: 50 - Options: Digital readout - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale and available immediately: Bljdjz D Suvopfx Afmsp Used PICOT rolling machine Year: 2019 Type: RCS235-30 3 motorized rollers Maximum length: 3100 mm Maximum rolling thickness: 8 mm Maximum nibbling thickness: 6 mm Roller diameter: 235 mm Digital roller position display

Condition: excellent (used), Year of construction: 2005, Technical specifications: Working length: 3100 mm Max. bending capacity: 20.0 mm Bending allowance: 15.0 mm CNC control: SIEMENS Simatic Diameter of all rollers: 350 mm Hydraulic folding bearing Control panel with digital display Bledpj Afby Rofx Afmjp Motor power: 15 kW CE marking Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 21 tons Accessories: Bending aid at the top and on the side The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.