Used Manual Arbor Press for sale (25,850)

Condition: good (used), Year of construction: 2008, pressing force: 30 t, Baler presses, Bramidan, 4-x 30 SLD, 30 tons pressing force – used - : Price ex location: only €3,950 (net) Manufacturer: Bramidan Model: 4-x 30 SLD Number: PEY297206-3 Year of manufacture: 2008 H: 2300mm / W: 1800mm / D: 1500mm Weight: 1,850kg 3x230/400V, 25/16 Amp, 4kW Condition: good (the photo with the warning tape is simply to indicate that the press is not being used anymore as a new, larger one has been purchased) Available: immediately Location: Husum Iedpfjyzcvwex Aateif Operating manual available

Condition: good (used), Year of construction: 2013, functionality: fully functional, Used 3 meter CNC press brake from Durma Model: AD R 30135 Capacity: 3100 x 135 tons Year of manufacture: 2013 Cybelec DNC 60 CNC control Akas Fiessler laser safety system Manual crowning Ijdpfx Asyvgqmjatjif 1 set of tooling from 1 to 6 mm

Condition: ready for operation (used), Pressing force: approx. 700 kN (approx. 70 tons) Iisdpfx Aasra Dddotof Motor power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Single bale weight: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m in length, 2.5 m in width, approx. 2.6 m in height Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Construction features large feed opening for cardboard possibility of automatic feeding (e.g., via conveyor) manual wire tying (4 wires) pallet lock and hydraulic doors for bale removal Advantages of this press large bales = fewer transports high pressing force suitable for continuous operation Available production years: 2018–2020

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1113, total width: 1,170 mm, total height: 1,510 mm, total length: 1,850 mm, briquette diameter: 60 mm, overall weight: 770 kg, Never used = New machine condition Year of manufacture: 2024 Operating hours: 6! - Option for water or oil cooling, suitable for larger or multi-shift operations (price is stated without cooling system) - Sufficiently large hopper ensures long machine runtime without the need for frequent material refilling Technical data: Motor power: 7.5 kW Briquette output: 40–100 kg/h depending on material Briquette diameter: 60 mm Briquette length max 60 mm (so-called endless briquette) Pressing pressure: 900 kg/cm² Hopper diameter: 1000 mm Dimensions: 1850 x 1170 x 1510 mm Weight: 770 kg Features: Hydraulic unit: 7 pressing cycles/min SIEMENS LCD programmable touch control panel Manual or fully automatic operation possible – SIEMENS PLC control Dual pressure gauge for improved pressure monitoring Briquetted material level probe Oil level probe Iodpfsyh Nfhox Aatjif Preheating unit for operation in low temperature environments Inspection window Can be connected to other machines in a production line Voltage: 400V – 50 Hz Moisture content of processed material must not exceed 18%

Condition: good (used), Year of construction: 1981, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 40 t, table width: 660 mm, table length: 530 mm, total length: 15,850 mm, total width: 12,450 mm, total height: 23,700 mm, overall weight: 4,500 kg, ram adjustment: 80 mm, stroke adjustment: 95 mm, LEN 40C Eccentric Press. Year of manufacture: 1981 (SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 40 tons - number of strokes in the machine: 70/142 min - number of strokes manual operation: 50 min - slider stroke adjustment: 8-95 mm - slider stroke: 80 mm - table surface: 660 x 530 mm Iiedpfx Aaetzwt Uotef - slider surface: 400 x 250 mm - extension: 265 mm - engine power: 3 / 4 kW - press dimensions: 1585 x 1245 x 2370 mm - weight: 4500 kg The technical condition of the machine is good. It is possible to inspect and check the machine in motion.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, machine/vehicle number: 109 262, For sale is a corner connection press complete with automatic adhesive injection unit from Schüco, Art. No.: EVM 280106, including an extensive range of accessories for various profile series, manual, and CE certification. The machine has seen very little use due to lack of space and is therefore in like-new condition. Iisdpfxeyc Sinj Aatjf

Condition: good (used), Year of construction: 1989, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 63 t, table width: 800 mm, table length: 630 mm, total length: 17,900 mm, total width: 14,250 mm, total height: 25,500 mm, overall weight: 5,850 kg, height adjustment type: mechanical, stroke adjustment: 105 mm, Eccentric press LEN 63C. Year prod. 1989(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 63 tons - number of strokes in automatic: 65/130 min - number of jumps manual operation: 45/50 min - slider stroke adjustment: 10-105 mm - slide stroke: 70 mm - table surface: 800 x 630 mm - slider surface: 450 x 280 mm - overhang: 315 mm - table - slider clearance: 335 mm - clearance between columns: 355 mm - number of gears: 2 - motor speed: 730/1440 min - motor power: 4/7,5 kW - press dimensions: 1425 x 1790 x 2550 mm - weight: 5850 kg The technical condition of the machine is good. It is possible to make a visual inspection and check the machine in operation. Iedpfx Aaetzxdzstoif

Condition: good (used), Year of construction: 2021, operating hours: 450 h, functionality: fully functional, Vertical Baler HSM V-Press 860 plus, Year of Manufacture: 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of Manufacture: 2021 Operating Hours: 450 Pressing Force: 60 t Drive Power: 4 kW Feed Opening: 1195 x 645 mm Filling Height: 1114 mm Bale Size: approx. 1200 x 1200 x 780 mm Iedpfx Aajzqr Irjtoif Bale Weight: 480 kg Binding: manual Theoretical Cycle Time (idle): 25 s Theoretical Throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, Paper, Cardboard Comment: The baler is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We accept no liability for the accuracy of the information provided or for any possible errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment condition is 100% advance payment.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Iiodpfx Aaezt H Uxjtof Made in Germany.

Condition: used, Single-column – Eccentric press PELS - RICHTER, type PEKR 125 Machine no. 20684, year of manufacture 1967 Pressing force: 125 tons Reach: 430 mm Table size: 1100 x 750 mm Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Iiodjfim Thepfx Aatef Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 450 mm Arbor hole: Ø 50 mm Stroke rate: 60 strokes/min Table height above floor: 900 mm Motor power: 7.5 kW Power connection: 380 volts, 50 Hz - Overload protection by shear plate in the ram - Compressed air coupling-brake combination DESCH - Ram weight balancing cylinder - Manual ram adjustment - Two-hand operation - Cam indexing mechanism - Central grease lubrication system Vögele - Stroke counter Space requirement L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm Iisdozp Ex Uspfx Aatsf - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: like new (used), Year of construction: 2025, COLUMBUS MOVE – The space-saving professional vacuum press for maximum flexibility Full performance. Minimal space requirements. Iijdpszqtngefx Aatsf The COLUMBUS MOVE was specifically developed for operations wishing to work professionally with vacuum technology—even with limited space available. Thanks to its mobile and compact design, the press can be easily stored after use, freeing up valuable workshop space. Ideal for: * Veneering * Laminating/form gluing * Coating * Curved workpieces * Flexible custom production Your benefits: * Space-saving MOVE system * Mobile and flexible use * Heavy-duty industrial construction * Lifetime guarantee on the machine structure * Premium BECKER vacuum pump * Quick-change membrane system * Connection for external vacuum bag * Simple operation and high operational safety COLUMBUS 360° included: With a practical manual, Master Manual, and AI support, you benefit not only from state-of-the-art technology but also from decades of application expertise. Technical specifications: * Usable area: 3050 x 1350 mm * Maximum payload: 1.0 t * Maximum workpiece height: 600 mm * Vacuum pump: BECKER 40 m³ * Weight: 670 kg Particularly attractive for companies seeking flexible production while making efficient use of valuable workshop space. COLUMBUS has been developing professional vacuum technology for woodworking operations for nearly 50 years. Viewing and personal consultation gladly by appointment.

Condition: like new (used), Year of construction: 2020, operating hours: 395 h, functionality: fully functional, machine/vehicle number: 980-416, total width: 2,098 mm, total height: 1,405 mm, total length: 2,316 mm, briquette diameter: 80 mm, overall weight: 1,800 kg, type of input current: three-phase, input current: 28 A, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 250 l, Equipment: cooling unit, emergency stop, WEIMA TH 814 Briquette Press! Top condition! Like new! Available immediately! Private sale (no VAT can be declared)! Operating hours: only approx. 400 hours The WEIMA TH 814 is a robust hydraulic briquetting press for industrial applications. It processes wood and biomass waste into highly compressed cylindrical briquettes with a diameter of 80 mm. The machine is designed for reliable continuous operation and offers high energy efficiency as well as a compact design for easy integration into existing plants. Model: WEIMA TH 814 Briquette diameter: 80 mm Applications: Wood, biomass, paper, plastic waste Year of manufacture: 2020 Throughput rate: up to approx. 180 kg/h Hydraulic motor: 11 kW Hydraulic system: automatic operation, suitable for continuous duty Weight: approx. 1,800 kg Dimensions (L × W × H): approx. 2,098 × 2,316 × 1,405 mm Hydraulic oil capacity: approx. 250 liters Feed hopper: approx. 1,400 × 1,400 mm Briquette length is adjustable and can be regulated via the feed auger's speed. Depending on the feed material rate into the pressing chamber, the briquette length will vary. The control is managed by a time relay in the control cabinet, which determines the running time of the feed auger's motor. Iiodoy Af T Iepfx Aatjf The machine has seen little use and is in very well-maintained condition. Sale due to underutilization. Trial run on-site possible. Loading on-site possible. Original operating manual (Hungarian) available. A German version can be provided by the supplier if needed. The integrated hydraulic system is equipped with automatic oil preheating and oil-cooling function. This ensures an optimal temperature range of the hydraulic oil, even at low ambient temperatures or during continuous operation. This allows reliable 24/7 continuous operation of the machine. The price is set fairly considering the condition and very low operating hours. Inspections can be arranged at short notice by appointment. If interested, I look forward to your message.

Year of construction: 2007, operating hours: 138 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 900K707385, Tablet Press PRESSIMA – as new, in ex-works condition Fully functional machine with complete documentation and software. Including multi-tip tooling set EU-D (5 × 4mm) (purchase price: €12,000, 6 months old) as well as a single-tip tooling set (5mm) EU-B. Both punch sets supplied by Ritter. The machine is equipped with an interchangeable turret. Both B- and D-type tooling can be used, in either EU or TSM standard. Operation • Suitable for small batch production • Main compression force measurement with digital readout on the machine panel • Digital display of parameters set via handwheels • Note: No automatic control system available Technical Data • Speed: 10–75 rpm • Max main compression force: 50 kN • Pre-compression force: 10 kN • Turret diameter: Ø 180 mm • Two-wheel feeder, variable speed • Drive motor: frequency controlled, 1.5 kW • Power supply: 400–480 V, 50/60 Hz • Total power consumption: 1.5 kW • Machine housing and press area: stainless steel • Press area unpainted, easy access, hard-nickel-plated surfaces • Central extraction port • Central manual lubrication pump for punches • Automatic lubrication pump for punches and guideways • Feeder motor integrated in the headpiece Mechanics • Handwheels for tablet thickness, main pressure, pre-compression, and fill • Rotary flap between fill tube and feeder • Solid pre-compression and main compression stations • Scrapers on upper and lower punches • Magnetic brakes on lower punches • 12 mm fill shoe as standard • Lower punch is lowered after dosing • Lower guideway and ejection rail easily removable • Machine status display on control panel Measuring and Analysis System • MS2300 for recording and analysis of up to 16 channels • Measurement/analysis of: o Main compression (upper) o Main compression (lower) o Pre-compression (upper) o Ejection force o Scraping force o Upper and lower punch displacement • Measuring amplifiers for main, pre-comp, ejection, and scraping force included Equipment / Features • Upper and lower punch shank bores with 4.8 mm keyways for guided tooling • Chamber-type feeder Iedoy Hl Aqspfx Aatsif • Turret hard chrome plated • Main compression force measurement incl. indicator on operator terminal • Accessory kit type 8 MX: o 4 EU-B blank dies o 4 EU-D blank dies o 4 plugs for EU-B/EU-D or TSM-B/TSM-D Optional • Control retrofit with Siemens S7-1200 and Siemens TP panel possible.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps Iiodpfsy S Rqwex Aatof 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: like new (used), Year of construction: 2016, pressing force: 400 t, passage width 2500 mm stroke 900 mm Total power requirement 62 kW machine weight approx. 27,5 t dimensions L x W x H approx. 3950 x 2200 x 4850 mm retraction force 40 t Main cylinder 2 pieces column diameter 220 mm installation height 1300 mm table size 2500 x 1600 mm ram size 3100 x 16000 mm table height above floor approx. 900 mm forward speed 200 mm/sec return speed 200 mm/sec working speed 5 - 15 mm/sec oil tank 1500 l oil quantity 1200 l pressure control adjustable from up to 50 - 400 t thermoforming cushion 1400 x 800 mm thermoforming unit capacity 30 - 60 t deep drawing cushion stroke 250 mm thermoforming cushion speed 5 - 80 mm/sec Iijdpsin Et Nefx Aatjf robust machine body with solid welded construction low maintenance and reliable piston rod with induction hardening and chrome plating T-slots according to customer requirements, if not specified 22mm according to DIN CE certificate manufactured according to EU standards operating instructions, technical documentation, documentation in German language engineering steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front + rear: Sick 1300mm Hydraulic components Bosch Rexroth Monitor Siemens 12 inch Electrical control box for wall mounting Interior of the press illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: Reduction of the idle consumption of the pump to approx. 2 kw Remote control for remote maintenance Two-hand operation on movable stand Further information: Pressure build-up up to 400 T within max. 4 seconds after closing the die. Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Operation of the press can be manual, semi-automatic or fully automatic

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Vacuum Press – Ready for Immediate Use | Excellent Condition | Versatile Applications For sale: High-quality vacuum press in excellent condition – ideal for joineries and woodworking companies seeking to work more efficiently and flexibly. Ijdpfszqtlfsx Aatoif This press enables you to: - Perform precise veneering - Carry out form bonding - Shape mineral-based materials and plastics - Achieve efficient production even for single pieces and custom solutions What this means for you: Expand your service portfolio and take on jobs that were previously not feasible or profitable. Technical Specifications: Vacuum Press Pioneer Vertical L Usable area: 3050 x 1350 mm Frame internal dimensions: 3130 x 1430 mm Max. workpiece height: 850 mm Overall dimensions: 3960 x 1640 x 1450 mm Weight: 880 kg Heater Pioneer Heat L Usable area: 2700 x 1100 mm Overall dimensions: 3110 x 1700 x 760 mm Weight: 685 kg Special features: - Easy operation - Low maintenance requirement - Versatile applications - Lifetime warranty (excluding wear parts) - Includes digital user manual and AI support! Inspection and test run possible at any time.

Condition: new, Year of construction: 2025, High performance CNC press brake PETERZEN model MORICO 70065 6 axis + 2 + 1 Rigid S355 steel frame Workbench structure and Ram manufactured from laminated S355 steel Symetric renforced Throats Heavy grey cast iron slydways with automatic lubrication system CNC Controller CYBELEC VisiPac 8 axis + 1 Bosch Rexroth servo valves Inovance servo drive systems DIEMA high resolution glass scales for high bending precision Bending force 700T Bending lenght 6500 mm Distance between columns 5100 mm Depth throat 420 mm Ram stroke 400 mm Closing Ram approach speed limited to 30 mm/s for human operation Closing Ram working speed 7 mm/s Return-speed 40 mm/s Main hydraulic motor 45 kW Machine weight 62,000 kg 8 Axes + 1 CNC controller Cybelec VisiPac Touchscreen monitor with vivid colors and high contrast 3D graphical profile drawing (Touch Profile) and precise 2D program creation The opening value can be setted individually in each sequence Machine can be inferfaced with different CAM software Easy single bends with the EasyBend page Correction menu Many languages available Centered lower die system 60 mm AMADA / WILA- tool or COLLY Standard Ram featured with intermittant tool holder for punches with AMADA or COLLY Standard dimensions and Fall down security All toolings adopt 42CrMo4 steel, induction hardened and cnc grinded 4 Axis Back gauge adopts linear guides and Ballscrews Back gauge travel X axis 1000 mm 2 automatic widened back gauge fingers on linear guide rails with helical rack and pinions (Axis Z1 and Z2) Automatic height adjustment (Axis R) 2 CNC Bending Followers 400 kg up to 60° angle Motorised displacement of bending followers and parking area on the right of the bending table Strong automatic mechanical crowning table. The compensation value is calculated and set by the CNC system. Safety Equipment : 3-position Foot switch with Emergency Stop Position Closing approaching speed limited to 30 mm/s for human operation Laser safety protection and permanent speed monitoring Closing bending (working) speed 7 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit category IV Iodpfxswd I Svs Aatsif Standard configuration and equipment : Electric control cabinet on left side CNC user interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 200 mm 1 Line of centred lower Dies (to be defined) Place of manufacture : Douarnenez (Britanny) in Northwest FRANCE Customisation available CE Certification in respect of CE2006/42 directive and EN12622+A1 European Standard Operation manual in English, German and French language Delivery and Services available worldwide Customized Quotation GROW YOUR BUSINESS WITH PETERZEN MACHINE TOOLS

Condition: repair required (used), Year of construction: 2019, pressing force: 220 t, overall weight: 12,620 kg, controller model: Delem DA-66T, working width: 3,050 mm, number of axes: 6, The press brake cannot be aligned because the X and R axes are blocked. This is a machine that is to be repaired or is intended for a project. TECHNICAL DETAILS Number of axes: 6 Axes: Y1 + Y2 + X + R + Z1 + Z2 Press force: 220 t Max. working width: 3,050 mm Frame spacing: 2,500 mm Crowning system: CNC-controlled Ram holder: hydraulic Tool holder type: WILA standard MACHINE DETAILS Drive: CNC Control: Delem DA-66T Power: 22 kW Dimensions & Weight Dimensions (L x W x H): 3,750 x 1,900 x 2,900 mm Ijdpfx Aezuw Eweatjif Weight: 12,620 kg Transport packages: 1 EQUIPMENT Tools

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Features and technical specifications: Electro-hydraulic drive Vertical press cylinders: 3 Vertical cylinder stroke: approx. 130 mm Vertical cylinders adjustable via a perforated grid Horizontal press cylinders: 2 Stroke of horizontal cylinders: approx. 130 mm Horizontal pressing force: approx. 2,000 kp Iiedpfxszk Nkdj Aatsf Medium-pressure beam: 1 unit Control: manual via hand lever Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg The information provided is subject to change until the machine arrives at our warehouse. Availability: at short notice Location: 63934 Röllbach

Condition: as good as new (ex-display), Year of construction: 2023, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Exhibition machine from 2023 with only approx. 2x operating hours condition like NEW special price on request Equipment: - robust electro-hydraulic workshop press, with fixed cylinder Iisdpfx Aasw U U Svotof - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Ijdpfxezt H U Es Aatsif Approximate format: 480 x 330 mm 3-ton pressure

Condition: used, Year of construction: 1992, machine/vehicle number: 97402, CHIESA SANSSON F1 PRESS FOR DIE CUT FORCE 60T. NEW BELT, FROM 2017 IS STORED IN THE WAREHOUSE USER MANUAL AVAILABLE Iiodpfx Ajwff I Djatef

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment: CE marking, For sale: a window and door press from the Italian company Casolin, model Junior. Baling press. Year of manufacture: 2008. Increased working area: 3000 mm x 2500 mm (exact dimensions in the photos – showing the press fully extended). The press is in good working order. We have the instruction manual in English. There is a minor issue with the joystick – it is functional and operational, but its base is likely damaged, and it has partially sunk inside. (photo attached). Export price – domestic price plus VAT. Iijdpjzhil Njfx Aatjf Transportation is the responsibility of the buyer; loading is the responsibility of the seller.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 3,100 mm, Equipment: documentation/manual, STANDARD EQUIPMENT Iedpfx Aaszcg Ixotoif Special beam and column design, implemented as a complex structure, automatically ensures the bending process without requiring separate control or manual adjustment. The two upper press cylinders are individually controlled (on the Y1 and Y2 axes), allowing for angle correction in seconds. AKAS safety light curtain (motorized) Electric foot pedal with 2 pedals and panic stop function Electronic selection for “Teach-In” programming of each axis Upper tool clamp, two-sided, with mechanical quick tool clamping Inverter – reduced energy consumption High-speed function, 100 tons up to 3 m Operating hour counter, first oil fill AMNC 3i graphic control with 18.5" touchscreen: Y1, Y2 – left and right press cylinders X1, X2 – front-to-back movement of rear backgauges Z1, Z2 – lateral manual movement of rear backgauges (4-axis) R – simultaneous height adjustment of rear backgauges Operation from memory or directly from USB Tool library (only for AMADA tools) Programming: 2D graphic, numerical angle, and Teach-In programming; 3D graphic with external software Modular tool system (835 mm, 415 mm, and segmented version – optional) DigiPro angle measuring system, infrared Technical data: Press force (kN) – 1,000 Table length (mm) – 3,110 Distance between columns (mm) – 2,705 C-frame opening (mm) – 420 Stroke (Standard) (mm) – 200 Stroke (Long Stroke option) (mm) – 350 Installation height (Standard) (mm) – 470 Installation height (Long Stroke option) (mm) – 620 Table width (mm) – 180 Table height (mm) – 960 Speed (approach) max. (mm/s) – 200 Speed (working) (mm/s) – 15 Speed (return) (mm/s) – 150 Number of controlled axes – 7 Rear backgauge travel range (X-axis) (mm) – 700 Rear backgauge travel range (X-axis, backgauge tilted) (mm) – 1,020 Rear backgauge travel range (R-axis) (mm) – 250 Travel speed (X-axis) (mm/s) – 500 Travel speed (R-axis) (mm/s) – 160 Travel speed (Z-axis) (mm/s) – 1,000 Electrical requirement (kW) – 16.5 Oil tank (liters) – 160 Control – AMNC 3i graphic control with 18.5" touchscreen DigiPro angle measuring system, cable-free – standard accessory Communication options with the machine – USB, UTP network External programmability – with BendCAM software