Used Mais for sale (3,741)

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve Dedeb A Nvbepfx Ag Djur -Manufacturer: Festo, Maintenance unit with filter and control valve, original packaging -Type: LFR-1/2-D-MIDI -Pressure: max. 16/12 bar -Number: 2x filter control valves available -Price: per piece -Weight: 1.3 kg/pc.

Condition: good (used), Line choke, line filter, frequency converter, frequency converter, drive converter, transformer -Manufacturer: R. Hogenkamp, Netzdrossel BV: 10833 -Type: 3UI 60/a -Quantity: 9x mains choke available Dedpfxen Nzi Ro Ag Djur -Price per piece -Dimensions: 120/80/H110 mm -Weight: 2.2 kg/pc.

Condition: used, Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve Dsdpfx Aekahkveg Dsur -Maintenance unit: with stable bracket -Outputs: 2x individually lockable -Pressure: Max. 10 bar / 150 PSI -Dimension: 390/325/H520 mm -Weight: 16 kg

Condition: used, PLC control, electronic module, interference filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter -Manufacturer: Siemens, mains filter interference filter -Type: :B84131-M3-A116 -Voltage: 440/2500V 50 - 60Hz Dodpfx Aoubfynog Dsur -Dimensions: 180/105/H50 mm Weight: 1.7 kg

Condition: used, Filter control valve, switch-on valve, maintenance unit, water separator -Connection: 1/4" -Number: 5 pieces available Dsdpfxoct H Tne Ag Dour -Price: per piece -Dimensions: 80/80/H190 mm -Weight: 0.7 kg

Condition: good (used), PLC control, electronic module, interference filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter, noise filter -Manufacturer: Okaya, Noise Filter -Type: 3SUP-HL200-ER-6 -Voltage: 3x 500V 200A 50/60Hz -Dimensions: 480/200/H200 mm -Weight: 20 kg Dsdpfx Aswuqm Rsg Deur

Condition: used, High-frequency ignition device, heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, UV flame simulator, ignition transformer, pressure monitor, pressure switch, mains transformer -Manufacturer: Siemens, power transformer for LMV5 system -Type: AGG5.210 -Voltage prim: 120 V -Number: 2x transformers available Dujdpfjghnf Eox Ag Der -Price: per piece -Dimension: 120/85/H80 mm -Weight: 0.3 kg/piece

Condition: used, Filter control valve, switch-on valve, maintenance unit, water separator -Connection: 3/8 " -Number: 2 pieces available Dujdpfx Aoct H Tljg Dor -Price: per piece -Dimensions: 65/60/H190 mm -Weight: 0.5 kg

Condition: used, To ensure the long-term performance, precision, and operational reliability of your sheet metal processing machines, it is essential to carry out regular maintenance, repair, and inspection procedures in accordance with manufacturer specifications and legal requirements. Our qualified service technicians perform these tasks professionally and reliably. These include: • Maintenance work to ensure uninterrupted operation (cleaning, lubrication, inspection and replacement of wear parts) • Repairs in case of malfunctions or breakdowns, including fault diagnosis, refurbishment, and adjustment Dujdpoygk Epjfx Ag Dor • Inspections in accordance with DGUV Regulation 3 and the Machinery Directive to verify safety and performance Upon completion of the work, you receive comprehensive documentation of all measures performed, including inspection reports and recommendations for any required follow-up actions. We will be happy to prepare a tailored quotation or schedule a maintenance appointment based on your specific operational requirements.

Condition: good (used), Mains filter for frequency converters, PLC control, mains filter, mains filter -Lenze: Mains filter E94AZMS0094 -Dimensions: 530/100/H70 mm Dujdpfxofkza Sj Ag Dor -Weight: 6.1 kg

Condition: used, mileage: 1 km, first registration: 06/1979, Year of construction: 1979, machine/vehicle number: 011 / 11, Snow plow for large parking lots /and in the harbor area Year 1979 - 81 Attachment plate size 5 hydr. lowering cylinder - lifting cylinder hydr. lateral adjustment running wheels Frame is made of steel Blade is made of ALU Dujdpfx Agsga Anns Der Track length : 5.200 mm Scraper bar : Vulkulan 20 - 60 % 3 pieces to choose from !!! More winter maintenance equipment available !!! Sale in existing condition !!!

Condition: new, Year of construction: 2019, functionality: fully functional, BIHLER cards for BIHLER controls: 1 pce. BIHLER # 800-97-0355.1 1 pce. BIHLER # 800-97-0356.1 1 pce. BIHLER # 800-97-0357.1 1 pce BIHLER # 800-97-0358.1 1 pce BIHLER # 800-97-0465.1 1 pce BIHLER # 800-97-0467.1 1 pce BIHLER # 800-97-0613.1 1 pce BIHLER # 800-97-0614.1 Dodex U D S Hspfx Ag Dsur 1 pce BIHLER # 800-97-0615.1 1 pce. BIHLER # 800-97-0656.1

Condition: excellent (used), Filter tray -Type: LR-D-MIDI-A -Pressure: max. 12 bar -Weight: 3 kg Dujdpfx Aob A Stzeg Djr

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20241204, total height: 905 mm, overall weight: 550 kg, total length: 1,200 mm, total width: 1,200 mm, type of input current: three-phase, tank capacity: 220 l, usable tank capacity: 110 l, input voltage: 400 V, workpiece width (max.): 200 mm, workpiece height (max.): 200 mm, outer diameter: 200 mm, workpiece length (max.): 200 mm, rotational speed (min.): 1,400 rpm, inner dimension width: 240 mm, power: 4.5 kW (6.12 HP), input frequency: 50 Hz, warranty duration: 12 months, load capacity: 100 kg, Vibra-Dry DK 200 WT maize dryer with pneumatic emptying and steel base. The high-quality Vibra-Dry DK 200 WT maize/grain dryer with a working volume of 220 liters is for sale. This versatile machine is perfect for drying and polishing with crushed corn granules, resulting in a flawless and shiny surface. Main features: Working principle: The moist parts are automatically transported from the circular vibrator via the separating table into the dryer. Pneumatically controlled outlet valve: For automatic emptying after drying. Coating: Inner walls and inlet and outlet area with durable 2-component PU coating to minimize wear and reduce noise. Temperature control: Adjustable between 30°C and 50°C via manual control in the control cabinet, with levels for 0%, 50% and 100%. Automatic temperature maintenance by switching the heating on and off. Technical details: Filling with approx. 10-15% crushed maize granules (25 kg recommended). Commissioning: Use of GM 16 or GM 20 maize grains required. The machine is reliable, robust and ideal for farms that value quality and efficiency. Enquire now! Dedovi Nhdopfx Ag Dsur

Condition: good (used), Here we offer an Indramat main spindle unit. Indramat RAC 2.2-250-380-A01-W1 main spindle unit Type: 2.2-250-380-A01-W1 Scope of delivery: (See image) 2 weeks commissioning guarantee Dujdpfx Agjda Itle Dsr The unit comes from a Commons resolution. We provide also with express shipping / express shipping (DHL, UPS, TNT) We can answer questions on the phone for you. Written order possible by email or fax

Condition: used, Automatic packing machine Manufacturer: MAIR Model: .90.D.6.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE_M_TS-31J-WILT_4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Djdjyma Adjpfx Ag Dsur Length: 4 - 12 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/6/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 4 – 12 m Square bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 2 Tn

Condition: used, Multihead cutting machine TRA2000/7/7, made by MAIR Including: Dsdpfx Ageymaype Djur 1) Loading table 2) Cutting machine with 7 cutting heads 3) Operator control panel 4) Unloading bin Optional to be build new upon requirement : 5) Double output craddle 6) New electrical control panel with frequency converters for cutting motors 7) Sound and safety protection cover Max. tube length: 7.500 mm Max. loading capacity: 2.000 kg Round tubes (outer ø): 12 – 50 mm Square tubes (hxw): 12×12 – 40×40 mm Rectangular tubes (hxw): 12×16 – 50×30 mm Max. thickness: 2,5 mm Length of tubes to be cut: 330 – 7.400 mm Number of cutting heads: 7

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader Dujdpfxeymax Eo Ag Djr 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Duodpfx Asymaw Uog Djr Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Year of construction: 2025, condition: refurbished (used), OFF-LINE Packing line .90.4.F Made by MAIR Revamped 2025 Scope of supply: 1 New chain transport system, with 4 lifting chains, to collect the tubes from the roller conveyor. 2 Automatic tube by tube feeding unit 3 Single Row preparation section 4 Automatic bundle formation unit, with interchangeable: - 4 Bundle holding support for square bundle - 4 Bundle holding supports for hexagonal bundle 5 Strapping bridge with manual strapping unit Signode 6 Movable carriage for frontal extraction of finished bundle 7 Finished bundle storage unit 8 New Electrical control panel with operator control desk 9 New emulsion draining & bundle weighting system Tube diameter (Round): 16 - 90 mm Tube diameter (Square): 16×16 – 80×80 mm Tube diameter (Rectangular): 20×16 – 80×40 mm Squares bundles: 250×250 – 500×500 mm Hexagonal bundles (size of side): 150mm – 350mm Bundle weight: Max. 2Tn Dodpfsymav Rox Ag Dour

Condition: used, MAIR Automatic packaging machine MPS RH150/D/4/SL & SIGNODE Automatic strapping unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL Model MPS RH150/D/4/SL Pat. automatically packs round tubes in hexagonal bundles. The Machine allows the strapping operation to be carried out automatically in a fix position, with the bundle moving sideways and stopping automatically at the programmed strapping positions. It is composed of: - Four tube lift chain conveyors with carrier teeth and intermittently driven for the lifting of one tube at a time, coming from the threading machine, to the aligning area; - One driven rollway to align the tube against an adjustable end-stop, before the row formation; - Two storage areas for the tube row; necessary during the bundle evacuation cycle; - One sturdy structure in welded structural steel, forming a bridge; - Tube row handling system which picks up a row of tubes at a time from the second row storage and places it down onto the bundle forming brackets. - Handling is performed by a series of electromagnets which perform a rotary movement during the row transfer cycle; - Four driven vertical brackets for bundle formation and holding. They are provided of adjustable blades according to the required bundle size and shape and they will be lowered in order to allow the bundle laying down on the evacuation trolley. - Driven evacuation trolley, sliding on rails fixed to the floor and equipped with lower driven rollers and pairs of retaining vertical loose rolls. - Driven flat conveyor to transport the bundle after the strapping area. Dusdjymahyspfx Ag Dor - Driven storage chains suitable to approach bundles at the selected quantity. - Drainage station for bundle lifting, to allow the coolant outlet from tubes; it is equipped with two hydraulic devices driven by a hydraulic power pack. - Control switch cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. 3. WEIGHING STATION Model KG8/DY The weighing station weighs tube bundles by means of load cells. Bundles are transferred by the driven storage chains to the weighing position. The Weighing Station is located under the pneumatic lifting devices which will lift the bundle in order to allow the weighing operation. It is composed of: - Bottom frame to be fixed to the floor, complete with four supports, linkages and loading cells. - Top holding frame, able to receive the bundle lifting devices. - Compact weight transmitter. 4. MANAGEMENT INFORMATION SYSTEM Model DATAPACK 3/T The Datapack Management System software allows the operator : - To control and monitor tube production in real time. - To set the a new bundle configuration with its strap application positions. - To store the various bundle configurations and strap application positions into an archive where they can be easily retrieved. - To create batches of different bundle configurations and then load them into one production sequence. - Monitor all alarm and fault messages (trouble...

Condition: used, Double chamfering line TFA3/D/12.5 Tube facing & bevelling The MAIR TFA3/D/12.5 double chamfering line is a high-performance industrial solution designed for simultaneous facing and internal/external bevelling of steel tubes. The line is capable of processing two tubes at the same time, finishing both ends with high precision and repeatability. Engineered for demanding production environments, this chamfering line is suitable for carbon steel tubes, hot or cold rolled, pickled or zinc-aluminium coated. Thanks to its CNC-controlled chamfering units, automated tube handling and integrated chip removal and blowing systems, the MAIR TFA3/D/12.5 ensures high productivity, consistent quality and reduced manual intervention. Scope of supply The complete MAIR TFA3/D/12.5 double chamfering line is composed of: · Accumulating table for single-tube extraction via chain conveyors · Walking beam system for synchronized transport of two tubes Dujdpjyl Upvofx Ag Djr · Two CNC chamfering machines, each equipped with: - Heavy-duty welded steel frame - Double chamfering unit with servo-driven linear movement - Tube clamping devices with interchangeable jaws - Toolholder disks for facing and internal/external bevelling - Hydraulic tool locking system (Morse taper) - Centralized lubrication system - Presetting bench for toolholders - Control panel · Chip conveyors located under the machines · Driven rollways and adjustable tube clamping stations · Blowing station for internal tube cleaning with adjustable system · Set of tooling (to be confirmed) Technical data · Manufacturer: MAIR · Model: TFA3/D/12.5 · Application: Double tube facing and inside/outside bevelling · Tube diameter range: 17.2 – 89 mm (3/8" - 3") · Tube length: 4 – 12.5 m · Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated) Tube diameter range: 17.2 – 89 mm (3/8" - 3") Tube length: 4 – 12.5 m Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated)

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2015 servo envelope inserting system available. 12 station base system!!!!! More pictures will follow soon. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2015 Configuration: - 12 station base - 11x RF2 rotary feeder (other feeders possible) - Divert bin 1, 2 - Conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Dujdpsxyfmgefx Ag Der Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Year of construction: 2018, condition: ready for operation (used), Various metalworking machines are available as remaining stock. 1/2/3) Three wobble riveting presses Thielicke GmbH & Co. KG WN6, year of manufacture: 1998. 4) Schlenker & Cie Atlas W4 high-speed planer, year of manufacture: 1961, weight: approx. 1700kg. 5) Spot welding machine J.u.W. Müller GmbH Opladen OMP67F, year of construction: 1960. 6) Ring welding machine Ing. G. Wenninger/BAPO KH III, year of construction: 1940s, conversion: 1964. 7) Cross-cut saw Berg & Schmid Mini Compact, year of construction: 2018. 8/9/10) Three presses. Including vices and lathe accessories. On-site inspection is possible. Individual sale possible. Duedpfou Tuvcex Ag Dsr

Year of construction: 2012, condition: ready for operation (used), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible. Dusdpfx Ajwty Etog Der