Used Machinning Cnc Centar for sale (64,931)

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 183-89, CNC Vertical Machining Center Make: CHIRON Group Model: CHIRON FZ 12 W Year of manufacture: 1999 Machine No.: 183-89 Typical technical specifications of the CHIRON FZ 12 W: Machine type: Control system: usually Siemens 840D or Heidenhain X-axis travel: approx. 550 mm Y-axis travel: approx. 300 mm Z-axis travel: approx. 425 mm Table size: approx. 660 × 350 mm Table load capacity: approx. 500 kg Spindle speed: depending on version, 10,000 – 20,000 rpm Tool holder: SK40 or HSK-A63 Tool changer: 12–24 positions Rapid traverse: up to 60 m/min Main spindle power: approx. 10–15 kW Coolant system Central lubrication Gbjdoy Sr Ikepfx Aivju Fully enclosed safety cabin Machine weight: approx. 4,500–5,500 kg The machine is part of CHIRON's well-known FZ series and is especially suited for high-speed aluminum and steel machining.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Type: DMC 835V Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Gbsdpjzw Tw Usfx Aivsu Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Condition: good (used), Infotec 1008 Rotary CNC machine adjustable RPM, manual or auto, 3Ph Gbjdpfx Aex Ai T Njivju

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Gbsdpfxoy Auxmj Aiveu Year of manufacture: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x plasma unit with Kjellberg HiFocus 161i power source Prepared for retrofitting with an oxy-fuel torch Kemper System 8000 filter system with pre-separator Asper Basic nesting software integrated into the CNC control 121026ä

Condition: used, Year of construction: 2016, Vertical CNC drilling and machining center Manufacturer: Weeke Type: Optimat BHX Year of manufacture: 2016 Technical data - Working area X: max. 3,050 mm - Working area Y: 70,850 mm - Workpiece thickness Z: 12,60 mm - Workpiece weight: max. approx. 35 kg - Number of axes: 3 Godpfxozy N E Ho Aivobu - Milling spindle: 5 kW - Milling spindle speed: max. 18,000 rpm - Tool holder: HSK-F63 or ETP 25, depending on the version - Tool change: automatic tool magazine - Tool positions: 4 - Vertical drilling spindles: 13 - Horizontal drilling spindles X: 4 - Horizontal drilling spindles Y: 2 - Drilling unit: V13 High Speed - Drilling unit power: 2.3 kW - Drilling speed: 1,500 - 7,500 rpm - Max. drilling depth: approx. 38 mm - Drilling diameter: max. approx. 35 mm - Spindle spacing: 32 mm - Dado saw: in X-direction - Dado saw blade: approx. 100 mm - Workpiece transport: throughfeed system / transport chain - Workpiece clamping: collet gripper, vacuum-free clamping system - Control system: HOMAG powerControl / powerTouch - Software: HOMAG woodWOP - Total connected load: approx. 11.5 kW - Dust extraction connection: approx. 160 mm - Dust extraction air requirement: approx. 2170 m³/h - Weight: approx. 1500 kg - CE Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1995, CNC portal flame cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm 8 x oxy-fuel torches, type ALFA 8 x Omnilift 200 Without rail Without table Without filter 121026ä Gsdsyay Dhepfx Aivobu

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC-Steuerung Gedpjzc D Dwefx Aivjbu Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Table surface: 1600 x 2000 mm Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Type: S20 Turbo Year of construction: 2004 Type of control: CNC-Steuerung Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Gsdpfxozx Nyne Aivobu Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: The machine can be viewed while powered up.

Condition: used, Year of construction: 2012, CNC machining center Manufacturer: Unverzagt Type: UVA 550 Plus Year of manufacture: 2012 Gjdpfxswv Tm Ne Aivsbu Control system: Siemens 828D Operating hours: approx. 3,000 Travel ranges: X/Y/Z: 600 x 400 x 500 mm Tool positions: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Hexagon function buttons Chip conveyor Spindle cooler IKZ (internal cooling system) 121026ä

Condition: used, 4-axis CNC milling machine Manufacturer: Quick Gbjdpfxjzvgmyo Aiveu Type: UA-481 New machine Technical data: 380 V-3-phase Working area: 2100 x 3050 x 400 mm 9 kW HSD/HSK-F-63 spindle NC Studio control 10 linear tool changers Double-layer vacuum table with 6 zones Yaskawa servomotor 2 Becker pumps (250 m³/h) NC Studio control with German language Optionally available at an extra charge: - 10-position rotary tool changer on the gantry - 12-position rotary tool changer on the gantry - 2 pneumatic pressure rollers for multiple part clamping - Vacuum table with T-slot for manual fixing of components Other configurations available upon request.

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS 5-axis – year of manufacture 2003 – fully functional – ideal as a complete spare/donor machine. The machine is currently operational and can be inspected while running. Due to its age, various original parts are no longer available from Schüco. Therefore, the machine is being sold at any reasonable offer. Preferably sold as a complete unit; the buyer is responsible for disassembly and transport. TECHNICAL DETAILS X-axis: 6,650 mm Y-axis: 800 mm Z-axis: 500 mm X-axis feed rate: 0-40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0-30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: from 0-90° continuously C-axis rotation: from 0-360° continuously Rotation speed of B- and C-axes: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a length of 6,000 mm: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling: Ø 300 mm Maximum spindle motor power: 7 kW Spindle motor power for disc milling: 7 kW Spindle motor speed: 0-30,000 rpm Tool change time: < 15 s (from clamping to clamping) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 Total machine weight: 6.5 tons WORKING AREA Gedpexr N Rmofx Aivebu Number of clamping blocks: 8 pcs Positioning of the clamping blocks: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: good (used), Year of construction: 2007, CNC traveling column milling machine Manufacturer: KEKEISEN Machine model: UFF 4000/16 Control system: Heidenhain iTNC 530 Year of manufacture: 2007 TECHNICAL DATA X-axis travel: 4000 mm Gbjdoz Ear Sspfx Aiveu Y-axis travel: 1400 mm Z-axis travel (vertical): 1600 mm Table area: 4200 x 1500 mm Table load: 10 t Spindle speeds (gear stages): 20 – 7000 rpm Spindle drive: 30 kW Rapid traverse: 18 m/min Machine weight approx.: 24.0 t + table EQUIPMENT FEATURES + CNC control system HEIDENHAIN iTNC 530 with fast MC424 + X-axis with hydrostatic guidance + B-axis with stepless swivel function + Air, water supply through the spindle and spray ring + Edge gap filter for water purification + Additional tank and pump for deep hole drilling at 80 bar + Minimal lubrication system + Chip conveyor with water pump and water tank + Cooling unit for hydrostatic guidance + Cooling unit for spindle and gearbox cooling + NC dividing head WALTER TABIH Evolution 320 EG, year of manufacture 11/2014, with horizontal table axis and tailstock MK6, center height 320 mm, max. Subject to changes and errors in the technical data and specifications.

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Gbedpfsv R E Rdex Aivou Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, CNC Machining Centre – Horizontal | Brand: HÜLLER HILLE | Type: NBH 95 Year of manufacture: 2001 The machine can be inspected under power by prior appointment. Condition: In working order / ready for operation. TECHNICAL SPECIFICATIONS: Working area - X/Y/Z axes: 630/630/630 mm - Workpiece swivel range within the working area: Ø 750 mm - Spindle clearance above top edge of pallet: min./max. 150/780 mm Pallet - Pallet clamping area: 400 x 500 mm - Transport load per pallet: approx. 0,6 tons - Fixture height: 880 mm - Pallet changeover time: approx. 7 sec. NC rotary table (B-axis) - Smallest incremental step: 0,001 degrees - Positioning uncertainty A according to ISO 230-2: 0,003 degrees - Permissible torques on the clamped table: * Tangential torque: max. 3.200 Nm * Tilting torque: max. 4.500 Nm Working spindle / Gearbox headstock - Tool holder: HSK-A 63 - Diameter at front bearing: 80 mm - Drive power 100% duty cycle/40% duty cycle: 21/30 kW - Speed range: max. 16.000 rpm - Torque at 100% duty cycle / 40% duty cycle: max. 100/143 Nm Feed / Feed force / Rapid traverse - Feed range, X, Y and Z axes: 1 – 50,000 mm/min - Feed force, X, Y and Z axes, 40% duty cycle: approx. 10.000 N - Rapid traverse speed, X, Y and Z axes: 50 m/min - Rapid traverse of rotary table: 40 rpm - Acceleration: approx. 7 m/s² - Ball screw (pitch): Ø 40 (20) mm Tool magazine: - Tool positions: 144 - 2 additional tool cassettes, each with 47 positions - Number of tool loading and unloading stations: 1 - Tool diameter / max. tool diameter: 75 / 175 (200) mm - Tool length: max. 400 (450) mm - Tool weight: max. 12 kg - Magazine cassette load capacity (including cassette): max. 600 kg Electrical system - Total power requirement: 80 kW Machine installation - Space requirements, area: approx. 16,75 m², height: 3,2 m - Ready-to-use machine weight: approx. 13,5 tons ACCESSORIES / EQUIPMENT: - Control: Siemens SINUMERIK 840D - Chip conveyor - Additional equipment for automated production: MPS pallet storage system - Documentation - CE marking - ... Technical data sheet with full details, including information on the further features, available on request. No guarantee is given as to the completeness or accuracy of the technical specifications and specifications. – Subject to prior sale – Godpfsz Emp Rex Aivobu

Condition: used, Year of construction: 2007, -no machining tools required -spindle replaced in 2018 -NUM control replaced in 2019 -machining dimension X: 5500 mm -machining dimension Y: drilling 1440 mm / milling 1780 mm -safety device: bumpers / protective grating -automatic central lubrication via CNC control -central extraction system -rear tool magazine HSK 63 with 24 positions -chip conveyor -TV-Morbidelli table with 10 supports, L=1500mm -vacuum cups, approx. 15 pcs, X=145/Y=145/H=50 mm + approx. 8 pcs, X=145/Y=55/H=50 mm -positioning aids on Morbidelli table -vacuum cup positioning via laser -vacuum pump, 250 CBM/H -drilling head speed adjustable via machine inverter -CNC control with PC office -prepared for teleservice Gedpez Ehvrefx Aivjbu -drilling unit with 30 spindles and 4+2 horizontal spindles -base for vacuum cup attachment to support rail Location: Supplier

Condition: used, Year of construction: 2012, CNC laser cutting machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Laser operating hours (approx.): 4,000 - 5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Sheet metal thickness, steel (max.): 15 mm Sheet metal thickness, stainless steel (max.): 8 mm Sheet metal thickness, aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet on the left, Ø 250 mm Gbsdpfex Eh Drsx Aivju Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions, overall machine: approx. 10,400 x 3,610 mm 121026ä

Condition: used, Year of construction: 2005, Processing size: 3000 x 1600 x 180 mm High-pressure pump 60 HP / 45 kW Model E-60 Operating pressure 4,130 BAR Water consumption 4.69 liters/min. Software: Watercad-CAM Automatic cutting optimization Storage location: customer Godpfxexgfbqs Aivsbu

Condition: used, Year of construction: 2012, No. 3274 CNC machining center HOMAG PROFI BAZ 222/40/F/K Used, year of construction 2012 Working range X max. 4000 mm Working range Y max. 1550 mm Gjdpfx Aiey S Edxjvobu Workpiece thickness max. 300 mm (incl. clamping devices) 5-axis main spindle HOMAG DRIVE5+ Spindle power 15 kW (S6) / 12 kW (S1) Spindle speed 1000 - 24000 rpm Tool clamping system HSK-F63 18-position rotary tool changer Pickup station for saw blade Ø 350 mm Drilling head with 21 spindles 17 vertical drilling spindles 2 horizontal drilling spindles in X-direction 2 horizontal drilling spindles in Y-direction Grooving saw swivelling 0° / 90° Edge banding unit HOMAG POWER EDGE 360° edge banding Pre-cutting station 2-position edge roll magazine 2 independent Y-axes for main spindle and edge banding unit Console table with 8 consoles Vacuum clamping devices 2 vacuum pumps, total capacity 2x 100/140 m3/h Control HOMAG powerControl PC85 Programming system woodWOP 6.0 (according to original order configuration) woodWOP Premium package incl. 4 single-user licenses / woodWOP Wizard / woodWOP technology database / woodWOP CAD/CAM Standard interface / DXF interface / woodMotion machining simulation / woodScout diagnostic system / collisionControl collision monitoring / Schuler MDE Basic machine data acquisition Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Manufacturer: CHIRON Type: Mill 2000 Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Gbsdpfxezcwt Sj Aiveu Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power.

Condition: good (used), Year of construction: 2011, Machine is in good working condition. Parts shown by hand not come. Gbedpfsz Nx Ubox Aivju

Condition: used, Year of construction: 1992, functionality: unexamined, machine/vehicle number: FBZ-8732, travel distance X-axis: 2,500 mm, type of input current: three-phase, input voltage: 380 V, CNC bed-type milling machine Anayak FBZ-HV-2500 with a swiveling universal milling head, year of manufacture 1992, Fidia control system. Serial no. FBZ-8732, connection 380 V, 50 Hz, 60 A, 40 kW. Longitudinal travel X 2,500 mm, bed-type table with continuous T-slots. Equipment: Irudex chip conveyor with chip collection cart, hydraulic unit with hydraulic ring for hydraulic tool release, control panel with keyboard, safety guard with viewing window. Gbedpsz A Uitsfx Aivsu Location: Homburg (Saar), Germany. Inspection by appointment. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: used, Year of construction: 2001, functionality: unexamined, machine/vehicle number: 220 297-0151, travel distance X-axis: 2,030 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 810 mm, controller manufacturer: Heidenhain, table width: 780 mm, table length: 2,200 mm, overall weight: 11,600 kg, Equipment: chip conveyor, CNC vertical machining center TAJMAC-ZPS MCFV 2080 NT, year of manufacture 2001, Heidenhain control. Type MCFV 2080NT P26.00, No. 220 297-0151, weight 11,600 kg. Travel ranges X/Y/Z: 2,030 x 810 x 810 mm, table area 2,200 x 780 mm with 5 T-slots. Equipment: Full protective enclosure, chip conveyor with chip cart, electronic handwheel. Gbodpfx Aez A Uf Ujiveu Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex location; dismantling and loading by arrangement. All information without guarantee.

Year of construction: 2014, condition: used, X-axis: 2000mm, Y-axis: 1200mm, Z-axis: 1500mm, table surface: 2200x1200mm, number and width of T-slots: 7x22mm, distance between T-slots: 140mm, max. workpiece weight on table: 7.2t, working feed rate: 0-12,000mm/min, rapid traverse: 15m/min, acceleration: 1.5m/s², hydraulic unit power: 5.5kW, pump flow rate: 25l/min, working pressure: 110bar, tank capacity: 180l, cooling unit capacity: 6,100W, compressor power: 2.61kW, length: 5820mm, width: 6723mm, height: 3602mm, weight: 17t, spindle operating hours: 5,000h, with documentation, an on-site inspection is possible. Gsdpfsz Ea Rzjx Aivobu

Condition: used, machine/vehicle number: 008744, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Gsdpfjz Ig Ufjx Aivobu Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: excellent (used), FANUC Power Mate control Grinding range 800 x 400 mm Wheel diameter / width / bore 250/ 50 / 127 mm Magnetic plate 800 x 350 mm Misc. accessories Gbedpfoyla Nujx Aivou MARCELS MASCHINEN CH