Used Lot Of Hand Tools for sale (46,075)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Tjdpfszux Iyjx Akiod Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Machine With: 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, Tsdpfxozqr Hne Akijd 1250mm between centres, 80mm spindle bore, 25-2500rpm spindle, 7.5kW Spindle Motor, coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: excellent (used), Electric, handheld nibbler TruTool PN 200 Product features The new TruTool PN 200 oscillating shear is primarily used for cutting C-L-U profiles, trapezoidal sheet metal, and other similar elements. The device features a short tool for processing sheet metal with a profile depth of up to 85 mm, as well as C-L-U profiles. Also suitable for corrugated sheets. Ideal for hard-to-reach places. The working direction can be easily adjusted by 360° in 45-degree increments without the need for tools. Minimum changeover time: Punch and die can be replaced quickly and easily, without interruptions and without tools. Unmatched speed: Fast and efficient, 2.1 meters per minute for structural steel with a strength of 400 N/mm². Applications: Trapezoidal sheet metal For cutting profiles with a depth of up to 86 mm and a width of 132.5 / 40 mm. For straight and angled cuts. Profiles For cutting C-L-U profiles. Corrugated sheet metal For trimming and cutting. For angled cuts, as well as internal and radial cutouts. • MAXIMUM SHEET THICKNESS: • MAXIMUM SHEET THICKNESS FOR STEEL 400 N/MM²: 2 mm • MAXIMUM SHEET THICKNESS FOR STEEL 600 N/MM²: 1.5 mm Todpfx Ajz Sb Hmokied • MAXIMUM SHEET THICKNESS FOR STEEL 800 N/MM²: 1 mm • MAXIMUM SHEET THICKNESS FOR ALUMINUM UP TO 250 N/MM²: 3 mm • RADIUS: • SMALLEST RADIUS: 50 mm • GENERAL INFORMATION: • WORKING SPEED: 2.1 m/min • NUMBER OF STROKES AT NOMINAL LOAD: 1500 1/min • STARTING HOLE DIAMETER: 24 mm • RATED POWER INPUT: 550 W

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs Tedoyzf Naspfx Akied For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor Tedpfezb Ipzex Akied 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm Tedpfxex D Tbmo Akiod 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Tsdpfoyaywhjx Akisd Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Quantity 4, Nordson Durablue 4 Hot Melt Pumps Each with one hand held glue spray gun Power 240 volt In excellent condition Tedpfxj Agcyvo Akied

Condition: excellent (used), Year of construction: 2023, Distance between Centres 1000mm, Swing 360mm, Swing over cross-slide 225mm, Tsdpfx Akoxz Dqgjiod Spindle Speed 50-4000rpm, 52mm spindle bore, Prototrak RLX control, toolpost, 3 jaw chuck, Coolant, interlocked guards

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 113L160577, travel distance X-axis: 1,270 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, feed rate X-axis: 11 m/min, feed rate Y-axis: 11 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 35 kVA, controller manufacturer: FANUC, controller model: SERIE 31I-MODEL B, workpiece length (max.): 1,400 mm, workpiece width (max.): 700 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,800 kg, total height: 3,050 mm, total length: 3,700 mm, total width: 3,240 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,800 kg, rotational speed (min.): 100 rpm, rotational speed (max.): 9,000 rpm, overall weight: 10,100 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 9,000 rpm, operating hours of spindle: 7,883 h, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, Equipment: documentation/manual, High-speed package, with optical scales on the X and Y axes. Tedpfx Akszlpgneijd

Condition: used, A fully operational metal processing company is for sale, complete with all production equipment, a customer base, and ongoing orders. This is more than just a sale of equipment – it’s the transfer of a thriving business with a current workforce of 6 employees. Production is uninterrupted; the company fulfills existing orders, operates on a subcontracting basis, and has secured future contracts through won tenders. The company boasts a modern equipment park, mostly from 2024-2026, allowing it to perform the entire main cycle of sheet metal processing: laser cutting of sheets and tubes, bending, laser and conventional welding, grinding, and other metal processing operations. Production Facilities The premises are rented under favorable terms: Production space: approximately 400 + 600 m² An additional second floor is available, offering approximately 800 m² for further expansion Overhead cranes are installed in the premises Low rental cost Main Production Equipment 2026 HN-6020 Sheet Metal Laser Cutting Machine Laser power: 12 kW Working format: 6000 × 1500 mm Metal thickness to be cut: up to 10 mm 2025 Hongnili Tube Laser Cutting Machine Raycus laser source Laser power: 3 kW Tube length: up to 6 m Wall thickness to be cut: up to 10 mm 2025 LEMANS B320/4 Bending Press Equipped with bending press tooling Tjdpfx Akez A Rwajijd 2024 Hongniu HN-3000W Laser Welding Machine Power: 3000 W Other Production Equipment Automatic grinding machines for parts after laser cutting Bevel grinding machine Band saw Welding machines Various production tools and auxiliary equipment A significant stock of sheet metal is available in the warehouse Transportation and Handling Equipment Electric Jungheinrich forklift Diesel Linde forklift Volkswagen Crafter cargo van Included with the company: The entire operational company is for sale, including production equipment, an existing customer base, ongoing projects and orders, won tenders, subcontracting activities, a team of 6 employees, metal stock, transportation, and other equipment and tools necessary for production. This is an opportunity to take over an already functioning metal processing company and continue production immediately, without the need to build a production base and assemble equipment from scratch. We will provide more information about the company, equipment, and sale conditions upon request. The company and the operational production can be viewed in advance by appointment. I have not specifically mentioned the company name, location, and sale price here – it is quite logical in this type of advertisement to reveal some information only to a serious buyer. Once we have the exact names/models of the laser manufacturers and the parameters of the LEMANS press, we can further refine the technical details.

Condition: used, XYZ 2-OP Compact Vertical machining Centre Year 2017 Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Tedszu Ni Uspfx Akiod Spindle BT 30 Spindle 3hp 8 Station Tool Changer Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 Tsdpfxsy Du N Ue Akiod YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: used, Graphtec CUTTING PRO FC7000MK2-100 grit-rolling digital servo plotter for cutting foils, vinyl and other materials Cutting width: 100 cm Max speed: 148.5 m/min Knife pressure: 0.196-5.88 N / 20-600 gr Control panel with buttons for position, menu, test cut and etc. Compatible with software for cutting like Cutting Master Tsdpj Aaxtwefx Akisd Ports for PC connection Comes with stand and waste bag In very good working condition

Condition: excellent (used), functionality: fully functional, Several tools are available, including a V1300 and a TruBend 7036. See images. Location: Berlin Availability: Upon request, no later than the end of October. Tjdpfx Aez Dvi Djkied Additional images available upon request. Ideally, everything would be sold as a package.

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, Todpfx Asq R Tnzekied spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger.

Condition: used, Year of construction: 2025, width of the strips 100 mm band length 2000 mm band speed 15/30 m/sec Tjdpjxcg Evefx Akijd tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad connected load frequency 400 V total power requirement 2,5 /3,3 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,2 x 0,75 x 1,4 m Exhibition machine, unused. Belt sander with - 40 grit sanding belt - 8 sanding rollers

Condition: ready for operation (used), Year of construction: 2021, operating hours: 300 h, functionality: fully functional, total height: 1,000 mm, total width: 550 mm, total length: 1,200 mm, laser power: 1,500 W, laser wavelength: 1,075 nm, ambient temperature (max.): 45 °C, The machine is in very good condition with less than 300 operating hours! TECHNICAL DETAILS Laser power at the workpiece: 1,500 W Wavelength: 1,075 ± 5 nm Type of laser beam delivery cable: LLK-A / BF 10 Laser safety Laser protection class: 4 Performance Level Emergency Stop button (PLE) TSS – Triple Security System Tedpszb Nl Rsfx Akisd Installation conditions and options Ambient temperature: 5–45 °C Integrated cooling Operating concept Machine control: Touch panel Programmable channels: 9 WLAN MACHINE DETAILS Dimensions (W x H x D): 550 × 1,000 × 1,200 mm EQUIPMENT Integrated pilot laser BLT laser welding device PenWelder Laser beam delivery cable Connection cable Contact tips and guide rail Configurable access control OPC-UA interface Remote service

Condition: used, Year of construction: 2022, 2022 | Wacker Neuson AP1850e | Used Hand compactor 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 2300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Like new machine 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41482 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Tjdpfx Ake Aa Di Rsiod 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 570 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, Machine Tool Description The HYUNDAI-WIA HI-V410D is a vertical machining center designed for high-precision and high-productivity operations. Manufactured in 2005, it features a Siemens 810D CNC control and is particularly suited to multi-axis machining with automatic tool change and twin-pallet capability. General Technical Data Brand: HYUNDAI-WIA Model: HI-V410D Category: Vertical Machining Centers (Rotary Pallet) Year of manufacture: 2005 CNC Control: Siemens 810D Machine weight: 6,500 kg Machine Dimensions: Length: 5,100 mm Width: 2,150 mm Height: 3,060 mm Spindle Spindle taper: ISO 40 Spindle speed: 10,000 rpm Spindle motor power (continuous / 30 min): 12 / 16 kW Working Capacity X-axis travel: 570 mm Y-axis travel: 410 mm Z-axis travel: 580 mm Distance spindle nose to table surface: 197 – 777 mm Distance column to spindle center: 495 mm Table Todpfx Aoxfaqwjkisd Table size: 2 x (650 x 410 mm) Number of tables: 2 Maximum table load: 2 x 200 kg No. 2 rotary tables Ø160 mm with tailstock support Feed Rates Rapid feedrate X/Y axes: 36,000 mm/min Rapid feedrate Z axis: 30,000 mm/min Working feedrate X/Y/Z axes: 1 ÷ 10,000 mm/min Tool Changer Tool taper: BT-40 Tool magazine capacity: 24 stations Maximum tool diameter: Adjacent tools: Ø90 mm Non-adjacent tools: Ø150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Chip conveyor Coolant tank with pumps Spindle line air conditioner Transformer Manuals, electrical diagrams and CE Declaration

Condition: used, mileage: 70,000 km, power: 85 kW (115.57 HP), first registration: 10/2010, fuel type: diesel, overall weight: 3,500 kg, color: yellow, gearing type: automatic, emission class: euro4, loading space length: 4,350 mm, loading space width: 2,050 mm, loading space height: 2,070 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Iveco Daily / Size: 2 - Maxi / VAT can be shown separately. Mileage: 70,000 km Net price: €5,880 MOT: 07/2027 ---- Further equipment/special equipment see below: ---- Please, no emails / no emails Due to time constraints, we cannot process them. Thank you for your understanding! ---- Opening hours and further information: Viewing and purchase possible without prior appointment: MON - THU: 9:00 AM to 4:00 PM FRI: 9:00 AM - 1:00 PM SAT: 9:00 AM - 12:00 PM Address: Tabakried 11 84076 Pfeffenhausen For questions: Christian Hirsch For questions: Christian Hirsch Please try again later as we are often in a customer meeting. More offers at: ---- Service booklet available: yes Emissions class: EURO 4 Environmental badge: green Previous owners: 1 - Rear view camera - LED interior lighting with motion sensor - Load compartment length 4.35 m - Load compartment width 2.05 m - Load compartment height 2.07 m Interior equipment: Cup holders, Power steering Exterior equipment: Sliding door, Electrically adjustable & heated side mirrors, Central locking including remote control, Electrically operated windows - front Technology: Outside temperature display, On-board computer Safety & Environment: Driver's airbag, Electronic immobilizer, ABS, ESP, Traction control, Particle filter Other: Non-smoker For questions: Christian Hirsch For questions: Christian Hirsch Please try again later as we are often in a customer meeting. More offers at: / More offers at: / Equipment was determined using a VIN query; technical errors may occur. Opening hours and further information: Viewing & purchase possible without prior appointment: MON - THU: 9:00 AM to 4:00 PM FRI: 9:00 AM - 1:00 PM SAT: 9:00 AM - 12:00 PM Address: Tabakried 11 84076 Pfeffenhausen D- Germany ---- The information provided online is a non-binding description. It does not represent guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors. Errors and prior sale are reserved. For questions: Christian Hirsch For questions: Christian Hirsch More offers at: / More offers at: / Equipment was determined using a VIN query; technical errors may occur. Tsdpfxjz D R Hks Akisd ---- More offers at: / More offers at: / Equipment was determined using a VIN query; technical errors may occur. The information provided online is a non-binding description. It does not represent guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors. Errors and prior sale are reserved.

Condition: used, mileage: 265,000 km, power: 125 kW (169.95 HP), first registration: 11/2001, fuel type: diesel, overall weight: 7,490 kg, color: green, gearing type: mechanical, loading space length: 6,000 mm, Equipment: ABS, electronic stability program (ESP), parking heater, IVECO ML75E17 – TECTOR – BOX BODY – AIR SUSPENSION – 6 M LONG – FIRST OWNER – DRIVES EXCELLENT – ----VEHICLE HISTORY * GERMAN VEHICLE * FIRST OWNER * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT * MANUAL TRANSMISSION * ENGINE BRAKE * AUXILIARY HEATER * AIR SUSPENSION * 6 M LONG * PERMISSIBLE TOTAL WEIGHT: 7,490 KG * UNLADEN WEIGHT: 4,300 KG Todpfez Iu Nqox Akisd * PAYLOAD: 3,190 KG * TIRE SIZE: 225 / 75 R 17.5 * GOOD TIRES * ENGINE AND TRANSMISSION RUN WELL ---- EXPORT / NOTE EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2,000 EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2,000 EXPORT REGISTRATION EXW POSSIBLE IN 10 MINUTES (AUTHORIZED EXPORTER). VEHICLE RESERVATIONS ONLY IN WRITING. VERBAL AGREEMENTS ARE NON-BINDING. SUBJECT TO CHANGES, ERRORS AND PRIOR SALE.

Condition: good (used), Second-hand machine in good condition Control type: Conventional active digital Location : 35708 Haiger Price : 13.500€ excl. Technical data: Digital display 3-axis digital display HEIDENHEIN TNC 134 Travel X-axis 500 mm Travel Y-axis 350 mm Travel Z-axis 380 mm Tool holder Vertical milling head SK 40 with hydr. tool clamping DIN 2080 ring groove Table type Fixed table Table clamping surface Todpfxeigv Ips Akiod 800 x 360 mm T-slot size 14 mm Weight 1,600 kg Dimensions 1500 x 2000 x 1900 mm Accessories - Central lubrication - coolant system - Operating instructions

Condition: used, mileage: 785,762 km, power: 132 kW (179.47 HP), first registration: 07/2013, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 09/2026, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 7,350 mm, total width: 2,550 mm, total height: 3,610 mm, Equipment: ABS, air conditioning, had accident, soot filter, tail-lift, MAN TGL 8.180 Refrigerated Box Truck ThermoKing V500 1st Owner Workshop Maintained The vehicle has an error message: transmission control fault, but is ready to drive. Standard Equipment: - MAN 8.180 refrigerated box - Cruise control (speed regulator) - 6-speed gearbox – Type: ZF 6 AS 800 OD, Tipmatic - Automatic climate control - Rear plastic fenders (full shell) - Roof air deflector - Side underrun protection - Seat cover/upholstery: comfort quality - Exterior sun visor - Front underrun protection - Central locking - Additional high beam/fog lights - Axle configuration: 4x2 - Curb/forward view mirror - Anti-lock braking system (ABS) - Safety belt indicator, left - On-board computer MAN-Tronic - Front compressed air coupling - Electronic braking system MAN-Brakematic - EURO 5 engine - Cab type: C (Compact) - Suspension: leaf spring - Tinted windshield - Alternator 28 V 80 A - Rear axle HY-0718 Body/Construction: - Chassis - Heated fuel filter - 100-liter plastic fuel tank - Adjustable steering column (steering wheel) - Raised air intake, dry air filter lower right - Engine 4.6 L – 132 kW Diesel (D 0834) - Engine brake - Wheelbase 3,900 mm - Spare wheel holder behind rear axle - Disc brakes, rear axle - Disc brakes, front axle - Front mud flaps - Tinted side windows - Rear axle stabilizer - Plastic bumper - Tinted door windows - Rear underrun protection - Viscous fan - Front axle VOK-05 offset - Gross vehicle weight: 8.00 t Special Equipment: - End cross member - Trailer coupling: Ringfeder 4040 G 145A - 12V/24V trailer socket - Trailer socket with ABS - Car phone antenna - Audio system: MAN CD radio 24V - Pre-wiring for radio 24V Todpsy Ng A Dsfx Akisd - Electrically adjustable and heated exterior mirrors - Wide-angle, electrically adjustable and heated left exterior mirror - Wide-angle, electrically adjustable and heated right exterior mirror - 155 Ah battery - Right-side kerb/side mirror, electrically adjustable and heated - 2-line brake connector at rear chassis - Entry lighting, driver/passenger side - Electric windows - Flame start system - etc. Appointments and test drives by telephone arrangement. All information provided online is a non-binding description and does not constitute guaranteed characteristics. The seller is not liable for typing or data transmission errors. Subject to prior sale and errors.

Condition: used, Lot of second-hand Weinig grinding wheels and clamping flanges for professional use in Rondamat grinding machines. Technical data: - Flange bore: 38 mm Tsdpfx Ao Afm I Tjkijd