Used Longitudinal Seam Welding Machine for sale (93,204)

Condition: good (used), Messer Griesheim welding machine Unitig GW 300 with torch earth cable direct alternating current Dkedeugv S Sspfx Ahuew

Condition: used, Micomat 250 Dkedjxc Tw Sjpfx Ahuew - 40-250A welding current - Shipping available at extra cost

Condition: good (used), Year of construction: 2008, – Capacity 35 kVA – Pneumatic – Throat depth 400 mm – Control TE 90 Mark II – Documentation – 400V Dodpfxow Tuiro Ahujkw

Condition: ready for operation (used), Herrmann HIQ Dialog 1200 SpeedControl Ultrasonic Welding Machine Generator rated power: 1200W Operating hours: 8704 h Ultrasonic active operating hours: 3 h Weldings performed: 61680 Year of manufacture: 2010 Cylinder diameter: 32mm Piston rod diameter: 12mm Cylinder stroke: 100mm You are welcome to visit us for a viewing. Dedpfjwcb Disx Ahujkw We can arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, input current: 16 A, Equipment: type plate available, Migatronic TIG DC HP Excellent TIG welding machine with the best working settings. Designed for complex welding tasks in the field. Djdpfsvbyazex Ahuskw The ideal service and assembly machine.

Year of construction: 2013, condition: ready for operation (used), 10 identical welding machines are available. Fuse protection: 32A, welding range: 40-350A, open circuit voltage: 18-43V, switch steps: 20, welding current at 100 percent duty cycle (40°C): 260A, length: 900mm, width: 560mm, height: 950mm, weight: 120kg. Standards: EN 60974-1 IEC 60974-1 international standard for arc welding equipment, protection class: IP23, protection against spray water and solid foreign objects smaller than 12mm, suitable for outdoor use, insulation class: H, cooling method: AF air cooling with fan, welding current range: 40A 16V to 350A 31.5V, open circuit voltage U₀: 18-43V, duty cycle at 350A: 50 percent duty cycle 5 minutes welding 5 minutes pause, at 330A: 60 percent duty cycle 6 minutes welding 4 minutes pause, at 260A: 100 percent duty cycle continuous operation possible, mains supply voltage: 3~400V 50Hz three phase, maximum mains current I₁ max: 25A, effective mains current I₁ eff: 18A. They are in good condition. An on-site inspection is possible. Dodpoxdc U Ajfx Ahujkw

Condition: excellent (used), Parallel-guided, water-cooled table spot welding machine Dodpfxjxapc Ss Ahuokw Manufacturer: DALEX Model: PMS 10-4 T Throat depth: 350 mm Rated power at 50% duty cycle: 32 kVA Secondary short-circuit current: 38.3 kA Secondary open-circuit voltage: 2.3 - 4.6 V Electrode force: 65-390 daN 8-position selector switch Single-stroke cylinder Foot pedal with machine table and CrNi steel shelves on left and right External control MPS 200 Operating manual in German Sample photo

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 2 pcs. Cloos MC 3 353 welding machines, year of manufacture 2010 and 2011, in excellent condition. These units were used in a training workshop and are in TOP CONDITION. Function test, inspection and welding test will be carried out before delivery. Dkjdpfx Ahow Hxcwsujw 1 Cloos welding machine MC 3 353 incl. wire feeder, 1 m connection hose package, 5 m ground cable, 5 m power connection cable, wire spool adapter, Euro central connection. Cleaning, maintenance and BGAV inspection included.

Condition: used, Dalex Works Pms 10-2 380V 50Hz rated power at 50 duty cycle: 63 kVA Dedpeg Rcpxefx Ahuskw secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V electrode force: 65-390 daN Machine weight 341 kg

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 16kVA Short circuit-current: 17kA Electrode force: 17-178daN Throat depth: 180-500mm --- Weld control: MPS 15036 (5-times, 1-program) Dkedpfxjxcx Ntj Ahuow --- Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: good (used), Year of construction: 2013, functionality: fully functional, For sale: Due to changes in our manufacturing division and production restructuring, we are offering a micro plasma welding machine for quick sale. Castolin Micro GAP 50 DC / Micro Plasma Welding Machine Year of Manufacture: 2013 Description: Designed for professional use in industry and trade. The Micro GAP 50 DC is ideal for welding tasks requiring precision, high-quality layer formation, and minimal dilution; particularly when fully automated welding is not practical or viable due to small batch sizes or task diversity. The machines can be supplied with various configuration options. Operation is via push-button selectors and rotary controls on the front panel display. The Micro GAP 50 DC is intended for manual and semi-automatic welding applications where frequent parameter changes are necessary. All settings are clearly displayed in plain text on the LCD display. Up to 100 memory slots are available for storing welding parameters. The powerful inverter delivers 33 A at 100% duty cycle, making it suitable for a wide range of micro plasma welding applications. Condition: Used, very good, barely used. Original price: Net €13,995 - Complete with accessories and documentation (see images) - Without gas cylinder - Without base/transport cart, which can be purchased optionally for €600 IMPORTANT: For logistical reasons, sale is limited to the European region. The buyer is responsible for removal, loading, and transportation. "The seller excludes any warranty for the purchased item. The item is sold as-is, without guarantee of suitability for any particular purpose or freedom from defects. The buyer confirms that they have inspected the item before purchase and are satisfied with its condition. The seller accepts no liability for damages arising from the use of the item. Any claims by the buyer against the seller are excluded." As of: 09/09/2025 Dkjdpfow A Iltjx Ahujw Price: €2,900 negotiable, plus VAT Prices are net, VAT to be added For further questions or additional information, please feel free to contact me.

Year of construction: 2018, condition: ready for operation (used), 5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal overload protection, central connection socket for welding torch. An on-site inspection is possible. Dkjdpsxdda Hefx Ahujw

Year of construction: 1995, condition: used, machine/vehicle number: 7393, Esab Air Assisted Spot Welding Machine Type: ZRED 164 Date: 1995 S/N: 7393 380V AC Djdpfjpuy Ayex Ahuskw Length: 1950mm Width: 600mm Height: 2400mm

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Dsdpfx Aew Rm Saohuskw Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Dodpfx Aev Dxm Sohuokw Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Year of construction: 2018, condition: ready for operation (used), 3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site inspection is possible. Dsdpjxdda Tjfx Ahuekw

Condition: used, Cooling unit Water recooling unit DALEX type DRF 2 Machine no. No. 38913719 Year of construction 1989 Volume flow 0.35 m3/h Cooling capacity 1950 Watt Operating pressure 2 to 3 bar Dsdpfog D H Ruox Ahuekw Refrigerant R 134a Unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volt, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Year of construction: 2021, condition: ready for operation (used), 20 identical welding machines are available. Type: cool41 U31, standard: IEC 60974-1, -2, -10 C.L.A, mains voltage: 400V, frequency: 50/60Hz, protection class: IP23, power consumption P min: 0.9kW, cooling capacity P max: 0.35MPa (3.5bar), max. current consumption: 2.5A, length: 539mm, width: 210mm, height: 415mm, weight: 22kg. Control: Comfort 2.0 with intuitive operation via click wheel, pulse spot normal mode continuously adjustable (especially for TIG welding), pulse pause ratio (balance) adjustable for example from 10-90%, Hz and kHz pulses up to approx. 15kHz, ActivArc technology dynamic arc control to ensure constant performance despite distance fluctuations and to prevent electrode sticking, improved root and penetration quality, spotArc Spotmatic functions for spot welding and tacking, 2-stroke and 4-stroke mode depending on torch trigger operation, manual metal arc welding often with MMA pulse automatic also integrated, gas pre-flow and post-flow times adjustable, upslope and downslope times also controllable, torch modes via torch trigger such as reduced secondary current, memory and job storage recurring welding tasks can be saved depending on version approx. 8-100 jobs, energy efficiency high efficiency, standby function available. Remote control and interfaces remote adjusters and functional torches can be connected, optional LAN WiFi gateway ewm Xnet, PC interfaces for parameter setting and monitoring. Very little used. An on-site inspection is possible. Djdpfxoxdc Upj Ahuskw

Condition: used, MIG MAG welding machine, protective gas welding unit EWM type MIG 230 Serial No.: L Year of manufacture: 1994 Output 230 Amp. = 35% duty cycle 120 Amp. = 100% duty cycle Dodpfx Aoitv Nnshujkw Adjustment range: 8 steps Power connection: 400 V, 50 Hz, 16 Amp. plug - 2-stroke and 4-stroke welding operation - Spot welding function - 2-roller wire feed - 3-meter hose assembly with central connection - Welding gas pressure reducer Dimensions (L x W x H): 1000 x 450 x 700 mm Weight: 70 kg in good condition

Condition: used, TIG Welding Machine MESSER GRIESHEIM Type Combitig GW 23 AC/DC The machine only operates with direct current welding and contact ignition Serial No. 445276 Year of manufacture: approx. 1990 Output: 230 Amps = 35% duty cycle 180 Amps = 60% duty cycle Dodpfsdzqa Iox Ahuokw 140 Amps = 100% duty cycle Infinitely variable setting range Current type: DC Mains connection: 400 V, 50 Hz, 32 A plug - 2-stroke / 4-stroke welding mode - DC welding with contact ignition works - AC welding and high-frequency ignition do not work - 7 meter hose package with hand torch - Connection plug for remote potentiometer (foot pedal) – foot pedal not included - Air-cooled - Gas pressure regulator Required space (L x W x H): 850 x 480 x 600 mm Weight: approx. 90 kg The welding test shows good results when welding stainless steel with DC; the HF ignition does not work, but the arc can be ignited via brief contact. When welding aluminum with AC, no arc is formed.

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition Djdpodzqblofx Ahuskw The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: used, Welding edge shaper, edge shaper, edge chamfering machine TRUMPF Chamfering of steel plates for weld seam preparation Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Power: 2000 watts Dsdpedz Sq Esfx Ahuokw Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30° bevel angle - resharpenable steel for high tool utilization - Set up for 20 mm sheet metal For chamfering straight and curved edges with a radius of at least 40 mm. For chamfering edges on flat and curved workpieces as well as pipes with an internal diameter of at least 80 mm. Weight: 14 kg

Condition: used, TIG Welding Machine DALEX Type GL/W 201 TIG Welding Unit Machine No.: 201 Year of manufacture: approx. 1995 Power output: 200 Amp at 35% duty cycle 160 Amp at 60% duty cycle 120 Amp at 100% duty cycle Adjustable range: stepless Current type: DC – Direct Current Dsdei E Izvopfx Ahujkw Mains connection: 400 Volt, 50 Hz, 5.9 kVA, 32 Amp plug - 2-stroke and 4-stroke welding function - 8-meter TIG torch package - HF ignition - Shielding gas pressure regulator - MMA welding for stick electrodes - Fan cooling - Socket for foot pedal (foot pedal not included) Space required (L x W x H): 850 mm x 450 mm x 700 mm Weight: 90 kg The welding test shows very good results when welding stainless steel with DC. Overall in very good condition.

Condition: used, MIG MAG welding machine, shielded gas welding machine CLOOS Type GLC 357 N MIG MAG welding power source Serial No. 576 Year of manufacture: approx. 1985 Rated output: 350 Amps Output: 350 Amps - 80% duty cycle 310 Amps - 100% duty cycle Infinitely variable adjustment range Connection hose package: 4.5 meters Power supply: 380 Volt, 50 Hz, 32 Amp plug - 2-stroke and 4-stroke welding function - External wire feeder type CK 72 ZK with 2-roll drive and 4.5 meter hose package Dedpjhubg Tefx Ahuekw - 3 meter hose package with central connection and CLOOS hand torch - Water-cooled - Pressure gauge for gas cylinder - Welding machine equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle Dedpfxed N E Rve Ahuekw 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results.