Used Linear Actuator for sale (2,827)

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Nwsdpfx Aoyuzg Hogwsd Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr231491, Manufacturer: DECKEL MAHO, Model: DMF 220 linear, Year of manufacture: 2001 Control system: Siemens 840D Powerline Travel and Axes X-axis (longitudinal): 2,200 mm Y-axis (transverse): 560 mm Z-axis (vertical): 720 mm Rapid traverse X/Y/Z: 50 m/min X-axis drive: High-dynamic linear drive Work Table Clamping surface: 2,600 x 600 mm Max. table load: 2,200 kg Main Spindle Speed range: 20 - 12,000 rpm (standard) Drive power (100% duty cycle): 35 / 25 kW (S1/S6) Max. torque: 130 / 87 Nm (at 100% duty cycle) Tool holder: SK 40 according to DIN 69871 Tool Changer Number of stations: 30-position magazine Tool change time (chip-to-chip): approx. 4-6 seconds (depending on model) Dimensions & Weight Space requirement approx.: 6,500 x 3,500 mm Machine weight approx.: 12.5 t The machine can be inspected under power by appointment. Technical data and specifications subject to change and error; prior sale reserved! Refurbished 5-axis CNC machining center Deckel MAHO DMF 250 linear in good condition. Year of manufacture: 2004. Control: Heidenhain iTNC 530. Technical data: X travel: 2,500 mm. Y travel: 920 mm. Z travel: 820 mm. B-axis: x/- 105° Worktable: 3,100 x 900 mm Nsdpfx Asyvt S Eegwowd Spindle interface: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 positions Equipped with: - Chip conveyor - Through-spindle coolant 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg The machine can be viewed by appointment. Technical data and specifications subject to change and error, as well as prior sale!

Condition: reconditioned (used), Year of construction: 2011, CNC Vertical Machining Center DECKEL MAHO DMF 260 linear, NEW DMG Design With Siemens 840 D path control with Shop Mill Year of manufacture: 2011 Travel distances: X 2600 mm Y 700 mm Z 700 mm Spindle speed range: 20 – 14,000 rpm, stepless (SK 40) Including the following accessories: - Rigid angle table, 2920 mm x 750 mm clamping area - Controlled swivel milling head (B axis) - NC rotary table by Hofmann with tailstock, center height: 200 mm - Vertical tool changer with 40 magazine slots (SK 40) - Electronic handwheel - Full enclosure with sliding doors and interior lighting - Coolant high pressure system, 40 bar - Chip conveyor - Operating modes 3 + 4 - 2 x Rotoclear (rotating viewing window) - Partition wall - Coolant system Nwjdpoyvvlnofx Agwed - RITTAL control cabinet cooler - 4 height-adjustable machine feet - Operating manual

Condition: good (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 2601-0324, spindle speed (min.): 6,500 rpm, spindle bore: 42 mm, travel distance X-axis: 326 mm, travel distance Y-axis: 265 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 18 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 6,500 rpm, type of input current: three-phase, bar passage: 42 mm, The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center featuring 6 linear axes and 2 C-axes. Direct drives enable high acceleration rates and precise machining operations. Both the main and sub spindles have been fitted with new bearings, and the machine has undergone a comprehensive overhaul. The following components have recently been renewed: - Drive motor of the driven tool 2 replaced - Sub spindle newly fitted with bearings - New door interlock switch installed Spindles: Main and sub spindle each up to 6,500 rpm, main spindle bar capacity 42 mm, sub spindle 38 mm Tool capacity: 26 stations, up to 11 powered tools; turret with Y-axis for milling and threading operations Axes / travels: Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm Nodpfx Ajyvy I Tegwswd Rapid traverse: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min Control: FANUC 160i-TB with 15" DMG SlimLine panel Including IEMCA Boss 545-E bar feeder The IEMCA Boss 545-E bar feeder (type 32 LL, year 2007) is included in the scope of delivery and enables continuous material feed up to Ø 42 mm. It operates on 400 V / 50 Hz and requires 6 bar air pressure; its own weight is approx. 860 kg. Inspection & collection: On-site inspection is possible If you are interested or have technical questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231486, Used, refurbished 5-axis CNC machining centre Deckel MAHO DMF 250 linear Year of manufacture: 2004 Control system: Heidenhain iTNC 530 Technical specifications: X-axis travel: 2,500 mm Y-axis travel: 920 mm Z-axis travel: 820 mm B-axis: +/- 105° Working table: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 – 18,000 rpm Tool changer capacity: 30 positions Equipped with: Nedoyu Nciopfx Agwjwd - Chip conveyor - Through-spindle coolant, 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg The machine can be inspected under power by appointment. Technical data and information subject to change and error; prior sale excepted!

Condition: like new (used), Year of construction: 2012, machine/vehicle number: IntNr231419, As-new, completely overhauled CNC 5-axis vertical machining centre DMG DMU 40 eVo linear, year of manufacture 2012, IntNr231419 Control system Brand: HEIDENHAIN Model: 530 Main drive Spindle speed range: 14,000 rpm Number of axes: 5 Travel distances X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 375 mm Includes: - Automatic tool changer with 120 SK 40 tool holders - Table rotary feed-through for workpiece clamping - Side door for robot loading - Renishaw tool breakage monitoring - Heidenhain measuring probe - High-pressure coolant system (IKZ) with 600 l tank - Emulsion extraction system - Active spindle cooler Nodpfjyu Nccox Agwewd - Linear drives for X and Y axes - Glass scales The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in technical data and specifications!

Condition: ready for operation (used), Year of construction: 2017, operating hours: 29,532 h, spindle speed (max.): 10,000 rpm, overall weight: 27,750 kg, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 4,000 kg, number of axes: 5, This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information. • Table dimensions: 3200 mm (L) x 1100 mm (W) • C 360° rotary axis • Maximum load capacity: Table 4000 kg / Divider 1200 kg Nwedpfx Aeyr Sc Hsgwjd • Tool magazine capacity: 60 pockets Additional equipment • Tool measurement systems: Mechanical and laser (BLUM) Technical Specification Taper Size ISO 50

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 143630, overall weight: 6,325 kg, This is a KUKA 1500/3 T linear unit for KRC4 robots Year of manufacture 2013 Nwjdpfxett Sbdo Agwed Total length: 17m

Condition: used, Year of construction: 2003, turning diameter max. 246 mm turning length 600 mm control 840 D Powerline Siemens greates pass round over bed 400 mm Swing dia. over traverse guideway 300 mm centre distance 600 mm turning speed range - main spindle max. 6.000 min/-1 power capacity - main spindel 16 kW max. Torque 155 Nm spindle diameter in front bearing 100 mm spindle bore 68,5 mm spindle nose 140H5 Spindle speed range subspindle max. 4.000 min/-1 power capacity - Sub spindle 7,5 kW max. Torque 48 Nm spindle diameter in front bearing 75 mm Njdpfxeypv Tqs Agwowd spindle bore 37 mm spindle nose 140H5 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tools max. 5.000 min -1 power capacity - driven tools 3,7 kW max. Torque 24 Nm tool taper VDI 30 Tool dimensions with square shank 20 x 20 mm x-axis 160 mm z-axis 450 mm rapid traverse X: 60 m/min rapid traverse Z: 45 m/min Feed force X: 2,5 kN Feed force Z: 4 kN rapid traverse C: 200 1/min max. Torque C: 155 Nm total power requirement 32 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 8,0 x 3,0 x 2,7 m CNC - Turning- and MillingCenter GILDEMEISTER - CTX 320 linear V5 - Main- and Subspindle - tool-drive - C-Axis - ShopTurn

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: HEIDENHAIN, number of axes: 3, This 3-axis DECKEL MAHO 64 V linear was manufactured in 2002. It features an SK40 tool holder and a 30-tool automatic tool changer. The machine includes a paper band filter. Note, the probe requires servicing due to a communication error. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO 64 V linear machine we have for sale. Contact us for more information. • ATC capacity: 30 tools Additional equipment • Paper band filter (coolant filtration) • Probe (needs service; communication error) Nwsdpfx Agox D E Hhjwjd Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment Nwsdpfxsx Nr Tus Agwod • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Technical Machine Benefits • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of axes: 4, This 4-axis DMG CTX 420 Linear V6 was manufactured in 2002. It features a Siemens 840D Powerline control, VDI 40 tool holder, Y-axis, chip conveyor, and a counter spindle. The machine has been fully overhauled by Eichten Werkzeugmaschinen GmbH, ensuring it is in perfect condition. If you are looking to get high-quality turn-mill capabilities, consider the DMG CTX 420 Linear V6 machine we have for sale. Contact us for more information. Additional equipment • PCU 50 • Y-axis • KSA pump • Hollow clamping cylinder 65 mm • Counter spindle with ejector cylinder • Parts catcher • Discharge conveyor • Sauter star turret with angled tools • Preparation bar loader Machine Benefits Technical Machine Benefits • In the event of sale, some tool holders, including driven tools, would also be sold. Extra Information The machine was completely dismantled, cleaned, checked for all functions, and overhauled by Eichten Werkzeugmaschinen GmbH in December 2023 before it was put into operation. It is therefore technically in perfect condition. Nwjdpfxjx D R Hgo Agwed

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840 D, table width: 500 mm, table length: 500 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of slots in tool magazine: 303, number of axes: 4, This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions. Additional equipment • Scraper belt chip conveyor with coolant system 980 liter, paper belt filter, discharge height 950 mm, width 380 mm, IKZ 80 bar / 14 l/min through spindle center (AD), pressure infinitely programmable, selectable via NC program, Roof flushing of the working area 180 l/min via flushing nozzles with a ripple valve • Rotating viewing window / work area door • Flushing gun with pump Nsdpjyi Ekfefx Agwswd • Double gripper • Wheel magazine • NC rotary table Ø 630 mm • 3D path control Machine Benefits Qualitative Machine Benefits • Mcis tdi tool management (module tdi machine) - overview , tool handling, planning • Extraction mechanical and electrical preparation for oil mist extraction • Tool breakage check mechanical design Technical Machine Benefits • Number of pallets: 12 // round pallet storage: rs 12 • Rotary pallet changer // work table with pallet support // permissible load: 600 kg // 2 pallets 500 x 500 mm with t-slots // pallet management // pallet changer cladding // claw flushing pallet • Cooling through the spindle center: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine slots hsk a63 • Infrared measuring probe renishaw pp60 optical (omp60) hsk-a 63 • Mpc machine protection control (machine protection through rapid shutdown) • Laminated glass safety pane for right-hand cabin door window Extra Information Documentation and Electrical circuit diagram (German) available

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Nwodpfeymcvmsx Agwsd Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2011, operating hours: 35,000 h, number of axes: 3, This 3-axis CONCEPT LASER M3 Linear was manufactured in 2011. It features a robust power supply with a total consumption of 7.4kW, supporting a laser system, IT, and control voltage components. Essential for operations requiring compressed air and nitrogen, it ensures a steady flow and pressure. Ideal for precision metal 3D printing. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Machine connection: cee plug, 400v 32a 6h, 3-meter cable • Compressed air: pressure: 7-8 bar, unlubricated Nwsdpfx Aex Nh Rcegwod • Flow rate: 130 l/min • Machine connection: coupling plug nw 7. 2, 3-meter fabric hose • Nitrogen n2: pressure: 5 bar, purity: >2. 5 • Flow rate: 100 l/min • Machine connection: hose nipple with sealing cone - 60° cone, 3-meter fabric hose Extra Information Power supply: Supply voltage: 3P/N/PE AC 400V, 10%, 50Hz-60Hz Fuse: 32A Power consumption: Laser system: Max. 34kW IT: 05kW Control voltage: 05kW NC (incl. axes): 10kW Extraction: 12kW Air conditioning unit: 08kW Total: 74kW

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,504 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 110 mm, overall weight: 20,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D Powerline, number of axes: 7, This 7-axis DMG Gildemeister GMX 400 linear was manufactured in 2004, featuring a maximum turning diameter of 640 mm and a turning length of 1,585 mm. It includes a Sinumerik 840D Powerline control, a milling spindle with a max speed of 12,000 rpm, and a tool magazine with up to 120 positions. If you are looking to get high-quality turn-mill capabilities, consider the DMG Gildemeister GMX 400 linear machine we have for sale. Contact us for more information. Additional equipment • Oil mist extraction • Coolant tank with belt filter system • Internal coolant system with 80 bar pressure • Approx. 30 tool holders Nwedpfxsx D S Dge Agwjd Machine Benefits Technical Machine Benefits • Drive power - main spindle: max. Torque 600 nm • B-axis: +/- 120° • C-axis resolution: 0. 001° and 1° • Maximum turning diameter: 640 mm • Turning length: 1585 mm • Standard turning diameter: 400 mm • Distance between centers of main spindle: max. Bar diameter 90 mm • Chuck diameter: 250 mm (max. 400 mm) • Number of tool positions: 12 positions • Turret tool holder: 40 mm din 69880 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, controller manufacturer: HEIDENHAIN, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. • Tool magazine: 60 tools • Through-spindle coolant (IKZ): 40 bar • Spindle overhauled in 2024 • B and C axes overhauled in 2024 Additional equipment • Automation (product handling), freely adjustable for product format and positioning • Paper belt filter Nwodex Rd Hpopfx Agwed • Blum laser tool break detection • Extraction system excluded Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: HEIDENHAIN, controller model: Plus IT 3D CNC Pilot 4290 plus it, number of axes: 7, This 7-axis DMG GILDEMEISTER GMX 250S Linear was manufactured in 2008. A turn-mill centre featuring the advanced Heidenhain Plus IT 3D CNC Pilot 4290 control unit, it represents the pinnacle of turning and milling capabilities. Contact us for more information. • Control unit: Heidenhain Plus IT 3D CNC Pilot 4290 plus it • 4th axis with tailstock (special feature) • Tool magazine with 22 tool positions (optional) • Description: The pinnacle of turning and milling! Additional equipment Nedpeyfv Rbsfx Agwswd • Chip tray

Condition: ready for operation (used), Year of construction: 2004, operating hours: 31,960 h, controller manufacturer: HEIDENHAIN, number of axes: 2, This 2-axis DMG GILDEMEISTER CTX 320 linear V3 was manufactured in 2004. A versatile turn-mill centre, it offers robust construction and precision for complex machining tasks. If you are looking to get high quality turning and milling capabilities consider the DMG CTX 320 linear V3 machine we have for sale. Contact us for more information. Additional equipment Nwedpfsx Nr T Uex Agwjd • Bar package with a pick-up device and parts conveyor belt • Bar guide for 1.5 metre bars and workpiece stop • Hainbuch SK 65 clamping top • Indicator light for machine's operating status • Cooling unit for air conditioning the control cabinet • OPTIONAL: A basic tool kit / A large selection of Hainbuch SK 65 clamping heads Machine Benefits Technical Machine Benefits • 12-position tool turret with driven tools at all stations Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,395 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, This 3-axis Gildemeister CTX 620 linear was manufactured in 2007. A horizontal turning machine, it includes tool holders and a tail stock. Consider the opportunity to buy this Gildemeister CTX 620 linear horizontal turning machine. Contact us for more information. Siemens 840D with shopturnSpindle with integrated motorTailstockChip conveyorSpray gunAutomatic doorHollow clamping cylinder SMW 121 mmSMW Autoblok 400 BHD-FL ø 118 hollow Additional equipment Nwjdpfx Aox Stlqsgwjd • Tool holders (as shown in pictures) will follow • Tailstock will follow

Condition: good (used), Year of construction: 2024, Linear Robot / Take-Out Robot SEPRO S5-25 med Manufacturer: SEPRO Robotique S.A.S. Model: S5-25 med Machine type: Linear robot / take-out robot for injection molding machines Serial number: R017622-01 Year of manufacture: 2024 Max. power: 1.5 kVA Weight: 100 kg Voltage: 3×400 V to 3×480 V ±10 % Frequency: 50/60 Hz Short-circuit withstand: 10 kA Automation system manufacturer: SEPRO Robotique GmbH Nwodeytnxgopfx Agwsd Automation project no.: R017622-01 G Customer installation no.: 6145 CE marking: present Location: Freiburg

Condition: used, Year of construction: 2017, We offer you: CNC Bed Milling Machine Manufacturer: DMG MORI Model: DMF 260-11 linear Year of manufacture: 2017 Control: Celos with Siemens 840D sl Operate Main spindle renewed Nwodewtd A Njpfx Agwjd Technical specifications: Travel distances: - X-axis travel: 2,600 mm - Y-axis travel: 1,100 mm - Z-axis travel: 900 mm Main spindle: - Speed range: 20 - 15,000 rpm - Drive power (40/100%): 46 / 30 kW - Torque (40/100%): 200 / 130 Nm - Tool holder: SK 40 Worktable: - Fixed table with integrated rotary table - Clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool stations: 60 positions - Chip-to-chip time: 7.5 s - Power-on hours: approx. 21,000 h - Operating hours: approx. 9,200 h Technical features: - ICS (internal coolant supply) 40 bar - Coolant spray gun - Rotating viewing window - Tropical package - Dynamic package Accessories: - Paper band filter 600l - Chip conveyor - Heidenhain TS 649 DMG touch probe - 3D quickSET - 2x Oil and emulsion mist separators - 4-color signal lamp - Electronic handwheel Accessories, pictured tools, and clamping devices are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Year of construction: 2008, condition: ready for operation (used), A CNC 7-axis counter-spindle lathe DMG Mori is available. Turning diameter: 640mm, max. turning length: 1185mm, travel X1/X2: 550mm/180mm, travel Y: +/-90mm, travel Z1/Z2: 1185mm/1050mm, rapid traverse X/Y/Z: 40m/min/24m/min/70m/min, speed: 5000rpm, B-axis: +/-120°, machine dimensions X/Y/Z: approx. 7800mm/4000mm/3000mm, weight: approx. 15000kg, control: Heidenhain plusIT Pilot, machine hours: 51320h, spindle hours: 34158h. Documentation available. An on-site inspection is possible. Nodpfjywy R Djx Agwjwd

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 07-08, spindle speed (max.): 12,000 rpm, travel distance X-axis: 480 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 275 mm, controller model: SIEMENS SINUMERIK 840D sl, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 480 mm Travel Y-axis: 250 mm Travel Z-axis: 275 mm Resolution X, Y, Z axes: < 0.1 µm Feed rate X-axis: max. 48 m/min Feed rate Y and Z axes: max. 24 m/min Rotary axis for workpiece (A-axis) Incremental resolution: < 0.0001 degrees Rotary axis speed range: max. 200 rpm Universal rotary axis speed range: max. 2,500 rpm Torque: max. 88 Nm Swivel axis for grinding head (C-axis) Swivel range: 225 degrees Resolution: < 0.0001 degrees Swivel speed: max. 360 degrees/s Grinding spindle (motor spindle) Speed: max. 12,000 rpm Drive power: max. 15 kW Control system: SIEMENS SINUMERIK 840D sl Drive: SIMODRIVE SIMATICS S 120 MACHINE DETAILS Nwodpfx Agoytfzxowsd (No information provided) EQUIPMENT (No information provided)

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel distance: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball guide size 20 Payload: 60 kg Maximum speed of ball screw: 3000 rpm Nwjdpjw Uc T Isfx Agwed Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current consumption: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit is mounted on a welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit available under stock number 59700