Used Line Bore for sale (13,809)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Cjdpfx Afjyhcabenjgn Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 U/min spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Additional information Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Cgsdjyf Ezijpfx Afnsn Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Cgjdpfju Tg I Djx Afnon Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Used (only test-run) vibratory finishing machine from PERS (image similar) Gentle deburring of small parts, laser-cut and stamped parts, formed, turned, and milled components. Suitable for all materials! Fully manually operated stand-alone unit. Low investment required! Technical Data: Year of manufacture: 12/2020 Cgsdpfx Ajhr Rkijfnen The machine is powered and can be inspected by appointment! Capacity: 120 l Bowl diameter: 640 mm Dimensions (LxWxH): 1,740 x 900 x 1,470 mm Power: 4 kW Voltage: 400 V AC / 3 phase Frequency: 50 Hz Weight: approx. 500 kg Speed: 50–160 RPM PU coating: 26 mm

Condition: excellent (used), Acemal waffle production line. Comprising divider, proofer, hot plate oven and cooling spiral. Bought new in 2015 and hardly used. From 2,000 Liège waffles per hour. Csdpsxnqtzjfx Afnjgn

Condition: excellent (used), Dowel Drill DB12 Cedpfx Aowmbpmefnjgn 1.1 kW 8 mm Stroke 3 Spindles

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Cedpsvryhyefx Afnjgn Elmepla saw Battenfeld R200/6 Battenfeld V125

Condition: good (used), PA Eclipse SL6 high throughput tray sealer from ready meals factory. Codpfxjpg Er Nj Afnsgn

Condition: used, Year of construction: 1990, diameter 250 mm tool adaptor 250 length 700 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Cgsdsu Sbkmspfx Afnjn

Year of construction: 2021, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, CODI DPL - 250 DEPALLETISER LOWERATOR 6 HEAD COUNTER PRESSURE FILLER AND SEAMER NITRO DOSER SET FOR 250 ML CANS, CHANGE PARTS now decommisioned, ready for shipping Codpfx Aoxtavvofnjgn

Condition: refurbished (used), Year of construction: 2006, Seewer Rondo SCM 50 croissant line with free connectable winder. Use the Croissomat to produce your croissants automatically. Triangles are stamped from a dough sheet, turned, and then curled to perfection. You can use the SCM to produce croissants in addition to other curled products. This compact machine can be accomodated in any bakery. for unfilled croissants for laminated and non-laminated doughs up to 900 units per row per hour (maximum 5,400 units) between 2 and 6 production rows digital control puncher press rolls year of build 2006 1 stamping knife is included, extra stamping knives are available for 2250 euro each Cedow Hykiopfx Afnegn

Condition: ready for operation (used), Year of construction: 2012, Canol make up pastry line Canolino 5.2 highly specified make-up line for the production of puff pastry, yeast dough and Danish pastry. This Canol Canolino 5.2 is equipped with an independent dough calibrator, ensuring precise dough thickness and consistent product quality. Reliable industrial line suitable for a wide range of bakery products. year of build 2012 length overall: 678 cm  conveyor belt width: 650 mm  independent dough calibrator V/4F volumetric dosing machine with 4 dosing nozzles cutting station guillotine Cgedpjyhdpkofx Afnon cutting knives, folding shoes etc. PLC control with touchscreen mobile execution on wheels pictures BEFORE cleaning

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. Cgsdpfxeu Rda Ij Afnsn The line has been used for making tubes from PP filled with chalk and barium sulfate. Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, drilling depth: 660 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,000 mm, drill diameter: 30 mm, TECHNICAL DETAILS Drilling depth: 660 mm Drill diameter: 30 mm X-axis travel: 700 mm Y-axis travel: 500 mm Z-axis travel: 1,000 mm Csdoya U U Ujpfx Afnegn W-axis travel: 250 mm Spindle speed: 60 - 60,000 rpm Table length: 900 mm Table width: 500 mm Table load capacity: 2,000 kg MACHINE DETAILS Control system: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,706 x 3,960 x 2,650 mm Total weight: 8,000 kg EQUIPMENT CNC rotary table (4th axis) Chip conveyor Paper band filter Electronic handwheel Original documentation

Condition: good (used), Flott p40 with Dofra feed on x, y, z axes. Automatically controlled. Stroke x: 6500 mm Stroke y: 355 mm Stroke z: stroke of the drilling spindle on the drill machine, adjustable from 0 to 160 mm Morse taper MK4 Drilling up to 40 mm Tapping up to M30 Cgedjygrybjpfx Afnen Programmable via touchscreen The drilling process runs fully automatically after setup.

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles (500 x 100 mm), consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Cgsdpfx Afoyhckasnsn Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes all stainless steel Cgedpfxjwdgiyj Afnsn mobile adjustable speed belt width 900 mm with extra outfeed belt with air knives dimensions (l x w x h) : ± 3.200 x 1.800 x 2.200 mm 2,73 kW

Condition: good (used), Year of construction: 2019, Weinig Conturex Greenline Plus CNC Window production machine Description; Year of construction: 2019 Processing workpiece length: 4500 mm Automatic part check on infeed Clamp adjustment in connection with rebate clamps Main motor 30 kW indirect driven Unispindle for mortizing, drilling and special machining Tool changer 35 and 17 positions HSK 63F tool holder Special software for machine data and company data registration In/output buffer length: 2000/ 2500 mm Optional tool set/ plan available Full description on request (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Csdpfxsw N Nixs Afnjgn Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Rondo starline is a high-performance bakery make-up line. Approx 13m long. The line consists of a calibrator. strip cutters. spray unit. Horizontal guillotine unit. Can be used for processing various dough types, including puff pastry, Danish pastry, yeast dough, shortcrust, and thin doughs for products like pizza or donuts Cedjx Squcopfx Afnegn

Condition: used, Year of construction: 2017, Overview This PET filling line was manufactured between 1998 - 2017 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 10.500 - 18.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 10.500 - 18.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Kosme | 2017 Elevator preform | Kosme | 2017 Rinsing/Filling/Capping | Tekal | 50/70/12 | 1998 Inspection machine | Heuft | 2010 Date coder | Printer Laser | 2017 Labelling machine | Sidel | 2017 Packing machine | SMI | 2002 Palletizer | SIPA | 2011 Pallet stretcher | SIPA | 2011 Mixing- and carbonating unit | Adue | 2013 Beverage analyzer | Maselli UR21 | 2009 Conveyors for empty PET bottles | Silga | 2017 Conveyors for filled PET bottles | Silga | 1998                                                                                             Conveyors for trays | Silga | 1998 Cjdjx Rrdcopfx Afnegn

Condition: used, Year of construction: 2002, Overview  The filling line for cups was built by SIG HAMBA in 2002, is still in operation until the end of 2024, and can be inspected at any time.   Technical data   Output: 7,200 - 19,200 containers/h  Cup formats:  Cup diameter: 95 mm   Max. Height 140 mm   Filling ranges:   Filler 20 ccm to 200 ccm filling  Filler 200 ccm to 500 ccm filling  Reserve space  Closure: sealing and snap-on lid   Siemens S7 control system   Scope of delivery Filling machine | SIG HAMBA | BK 8008 P | 2002   Tray erector | Schäfer and Flottmann | SFS 337 | 2002  Empty crate conveyor | Manex | - | 2002  Packer | AF | - | 2002  Integrated in SIG HAMBA BK 8008 P system  Good maintenance condition  Full crate conveyor | Manex, Sema | Manex Elevator | 2002  Palletizer | Manex | - | 2002     Cedjt Uw E Repfx Afnsgn

Condition: used, Year of construction: 2012, Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications Output: 7,800 bph Producs: Beer and CSD Formats: NRW 0.5 l 0.33 l ring neck 0.25 l LN Machine List  Machine type: Decrater Manufacturer: BMS Year of manufacture: 2012 Machine type: Decapper (Screw Cap) Manufacturer: Rink Decapping in the crate Euro 0,5l in 4x5 crate Year of manufacture: 2012 Machine type: Bottle washer Manufacturer: Gera Year of manufacture: 2024 Machine type: Empty bottle inspector Manufacturer: Krones Model: Smarttronic Incl. Pusher Year of manufacture: 2012 Machine type: Filler Manufacturer: Kosme Model: Isofill G 28/960 28 Valves Year of manufacture: 2012 With Combi Capper 4 heads(Crown Cork and Screw Cap) Capacity: 7,800 bph Machine type: Labeling machine Manufacturer: Krones Model: Robusta Refurbished in 2012 10 Bottle plates 2 Label stations with 4 grippers and 4 glue pallets Inkjet printer Machine type: Crater Manufacturer: BMS Year of manufacture: 2012 Crate format: Modul Crate 4x5 Cgjdeyb Sbuspfx Afnen

Condition: used, Year of construction: 2004, Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2,000 crates/hour | 1997 | GDB crates, stainless steel Bottle washer | Klinger | 1993 | Stainless steel, multi-zone, steam extraction, dosing system Empty bottle inspector | Krones | up to 50,000 bottles/hour | 2004 | Linatronic system Filler | Nate-Veral 60 | 20,000 bottles/hour | 2004 | glass bottles, without closer Capper | Datz | 20,000 bottles/hour | 2004 | 8-head Solo SV, left–right working direction Swing-top capper | Datz | 20,000 bottles/hour | 2004 | 24-head BVM-24R, swing-top closure Labeller | Krones | up to 20,000 bottles/hour | 2004 | Prontomatic, 2 stations, Checkmat inspection Crater | Otto Fleischer | 1993 | ROTA 1 E, automatic case packer Cedpeyb R Uaefx Afnogn

Condition: used, Year of construction: 2000, Overview This complete filling line for non-returnable PET bottles was manufactured 2000 mainly by the german manufacturer KRONES. The line was running as a returnable bottle filling line before and was changed to non-returnable in 2007. The line is designed for high-capacity beverage production, handling up to 36,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.    Technical Data Capacity: 36,000 bph (at 0,33L) Bottle Formats: 0,33L and 0,5L Packaging formats: shrink wrapping with carry handle  Application: CSD Hygienic design condition: installed, good technical condition   Scope of Delivery Preformfeeding | SIG Coroplast/KHS | 2007 Blow Molding Machine | SIG Coroplast/KHS | Blomax 20 | 2007 Compressor | LMF | 2007 Rinsing | Krones| Variojet | 100 Stellen |  2000 Filling/Capping | Krones| Sensometic VP-IM | Capacity: 36.000/h | 2000 Cap Detection | Heuft | 2000 Drying machine | Krones| 2013 Labelling machine | Krones| Solomatic 1200-25-6-5-160 | 2013 Shrink Packer (2x) | Kettner | TFS 60 | 2000 Tray Packer | Kettner | 2000 Tray coding (2x) | Bluhm Linx 8900 | 2019 Handle Application | PAD/Kettner | 2000 Palett wrapper (2x) | Kettner/Krones | 2000 Palett labelling | Logopak | 2000 Loader | Kettner/Krones | 2000 Mixer | Krones/Anton Paar | 2000 KZE | GEA Tuchenhagen | 2000 Cgsdpfx Ajyb R U Hefnsn

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 14.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Labelling machine | Krones Contiroll | 2004 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009 Codpfx Aoyb Tuisfnjgn