Used Lifepak 300 for sale (12,898)

Condition: good (used), Year of construction: 1996, Hema Profile Grinding Machine Type PSM 300, year 96, with base frame HEMA PSM 300 Universal Profile Grinder - Automatic belt tensioning - Tool-free, fast belt change within seconds - Standard internal grinding with same belt length - Quick-change system for grinding bars - Cast iron table, 450x450 mm, tiltable up to 45°, zero stop and scale - Motor 1.1 kW, 2800 rpm - Very quiet operation - Maximum grinding height 300 mm, grinding bar height inside 200 mm, outside 250 mm - Switch with undervoltage release - Extraction port 60 mm - Connection for industrial vacuum cleaner Codpeyl Ilwofx Agzsgp

Condition: used, Year of construction: 1979, Intake diameter: 300 mm Discharge diameter: 300 mm Codpswm Nrvofx Agzegp Flow rate: 5400 m³/h Motor power: 2.5 kW Weight: 100 kg

Year of construction: 2005, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS SINUMERIK, overall weight: 8,000 kg, turning length: 800 mm, machine/vehicle number: 500571, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Cgedpfxeynhd So Agzjp Placing a bid obligates the buyer to collect the item within either May 11–13, 2026, or May 18–21, 2026, without exception. TECHNICAL DETAILS Travel X-axis: approx. 200 mm Travel Z-axis: approx. 500 mm Spindle bore: approx. 100 mm Turning length approx.: 800 mm MACHINE DETAILS Control: SIEMENS SINUMERIK Operating voltage: 400 V Rated current: 80 A Connected load: 47 kW Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 6,000 x 3,000 x 3,300 mm Weight: 8,000 kg EQUIPMENT Double turret with 12-position tool turret each Tailstock Main spindle Chip conveyor Two manuals BÜCHEL brand extraction filter Note: Machine can be transported on a standard truck. External reference: Pieper - Lot 50

Condition: new, Bernardo Abricht - and thick-planing machine ADM 300 - 400 V/ 3.0 kW Technical specifications Abrichthobel Dressing width 305 mm Table length 1510 mm Table height 915 mm Planing shaft speed 5500 rpm Planing knife 4 pcs. Planshaft diameter 78 mm Dressing stop 1105 x 155 mm Cgodpfx Agsd N S U Tjzjp Dressing stop swivel90° to 45° Max chip removal 3 mm Dickenhobel Table length 585 mm Planing width 300 mm Thickness pass min./max. 3 - 220 mm Max chip removal 3 mm Feed speed 6.6 m/min Suction connection of 100 mm Engine power S1 100% 3.0 kW (4.0 hp) Engine recording power S6 40% 4.2 kW (5.7 hp) Voltage 400 V Machine dimensions (L x W x H) 1700 x 790 x 1080 mm Weight approx. 280 kg Properties • Foldable dressing tables for quick switching to the thickness planer • Intergrated foldable chip ejection hood - connection diameter 100 mm • Both dressing tables with fine adjustment and noise-insulating table lips • Maintenance-free 4-knife shaft with planing knife in HSS-18% quality • Spiral toothed feed roller for safe and uniform workpiece feed • Flat-precise thickness planing ducrh thickening table with central column guide and support • Side-guided breakstop, so that the machine can be placed directly on the wall • Standard with hobble knife adjustment gauge for optimal adjustment of the planing knives • Powerful drive motor with high power reserves Delivery • HsS-quality planing knives • Planing knife adjustment gauge •

Condition: new, For technical specifications, see the PDF file. Cgsdpfjxp H H Hox Agzop

Condition: new, Bernardo twin band saw MITRE MBS 300 DG-V PRO Technical specifications Cutting capacity round / square 90 ° 255 mm / 210 x 210 mm Section flat 90 ° 310 x 210 mm Cutting capacity round / square 45 ° R 220 mm / 210 x 210 mm Section flat 45° R 220 x 200 mm Cutting capacity round / square 45 ° L 230 mm / 200 x 200 mm Section flat 45° L 230 x 200 mm Cutting capacity round / square 60 ° R 135 mm / 135 x 135 mm Section 135 x 135 mm flat 60 ° R Working height 930 mm Band saw blade dimensions 2750 x 27 x 0,9 mm Cutting speeds, variable 20 - 80 m/min Coolant pump 100 W S1 motor power output 100% 1,5 kW Motor power S6 40% 2,2 kW Voltage 400 V Machine dimensions (L x D x H) 2000 x 1250 x 1900 mm Weight 350 kg Cedpfx Ajd Hzbwegzogp Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Blade guide with tungsten carbide inserts • Quick clamping Vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: new, PILOUS double miter band saw ARG 300 plus H.F. with automatic hydraulic lifting of the saw frame Incl. special accessories: driven chip brush, belt tension indicator Roller conveyor D 400 / 3m incl. digital measuring system Roller conveyor D 400 / 3m Round: 90°300mm, -45°220mm,+45°240mm,+60°155mm Square: 90°290mm, -45°195mm,+45°225mm,+60°150mm Rectangle: 90°375 x 190mm, -45°240 x 100mm, +45°240 x 160mm, +60°150 x 150mm Main motor:400 V, 50 Hz, 2,2 kW Pump motor:400 V, 50 Hz, 0,05 kW Hydraulic power unit motor:400 V, 50 Hz, 0,18 kW Saw blade speed:15-90 m/min. Stepless Cgodpfx Aeh S Ikksgzop Saw blade length:3150 x 27 x 0,9 mm Working height from vice: 910 mm Coolant tank: approx. 15 l Machine dimensions (min.) 950 x 1750 x 1600 mm machine dimensions (max.)1700 x 2000 x 2150 mm Machine weight: 645 kg

Condition: new, For technical specifications, see the PDF file. Csdexp Hygspfx Agzegp

Condition: new, For technical specifications, see the PDF file. Cedpfx Aoxp H Nnogzogp

Condition: excellent (used), mileage: 594,313 km, power: 221 kW (300.48 HP), first registration: 09/2006, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: steel-air, Year of construction: 2006, = Additional options and accessories = - Tipping hydraulics - PTO = Notes = BELGIAN TRACTOR UNIT = Further information = Front axle: Steered; Suspension: leaf springs Rear axle: Twin wheels; Suspension: air suspension Number of cylinders: 6 Cgedpfx Aeylp T Njgzop gross vehicle weight: 19,000 kg Technical condition: very good Visual condition: very good Please contact Thierry Leemans for more information.

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, total width: 650 mm, total length: 1,200 mm, total height: 1,800 mm, overall weight: 300 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates prompt collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! MACHINE DETAILS Operating voltage: 230 V Pneumatics: 4 - 6 bar Frequency: 50/60 Hz Dimensions & Weight Dimensions (L x W x H): 1,200 x 650 x 1,800 mm Weight: 300 kg EQUIPMENT Cjdpjym T Utjfx Agzogp Adapter for SK 40 tool holders Adapter for SK 50 tool holders External reference: Pieper - Lot 156

Year of construction: 1960, condition: used, R.A.S. rotary mandrel press Csdpfoic Rn Uex Agzogp Type 200-20 machine no. 117/6 stroke 200 mm pressure force 20 t spindle diameter 60 mm

Condition: used, Hard stone slab, granite slab, granite block, measuring cube Hard stone block, angle block precisely machined on all sides The granite slab comes from a measuring machine Codpfsh Uhq Dex Agzjgp Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W: x H: 1350 x 300 x 245 mm - 5 support blocks with leveling screws approx. 400 mm - 8 threaded bushes in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushes M16 - Small chipping on one edge of the top Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of measuring plate: 1500 kg Weight of granite feet: 100 kg very good condition

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Cgjdpfx Agsfx Hyfozep Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: used, Battery changing rack, transport rack, storage rack for forklift batteries Changing table, battery pallet, battery changing system, battery changing trolley Manufacturer: WELUX 2.5 Type: WS2-RR-2-300 Load capacity: 2x 500 kg per compartment = 1000 kg Compartment dimensions W x D = 300 x 920 mm Compartment dimensions without centre bar W x D = 655 x 920 mm Cjdpfxofgpfpo Agzjgp Adjustable height: 80 to 200 mm - Centre bar removable - Also suitable for sheet material - 16 pieces of galvanized steel rollers Ø 50 mm - 4 castors Ø 100 mm, 2 of which are swivel with brake - Each castor individually height-adjustable via threaded rods Overall dimensions L x W x H: 1050 x 950 x 615 mm Net weight: 85 kg Good condition

Condition: used, Hard stone plate, granite plate, granite block Hard stone block, angle block precisely machined on all sides Measuring cube, measuring plate Length: 1590 mm Width: 300 mm Height: 470 mm - 2 drillings Ø 80 mm - 2 drillings Ø 120 mm Cgjdpfx Aeg Uar Dsgzjp - Threaded inserts mainly M16, some with M12 and M18 Net weight: 570 kg Good condition

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 300 Horizontal movement: 490 mm Vertical movement: 400 mm Load capacity: max. 14 kg Handyflex projection: 275 to 765 mm Cjdpfogbpuhsx Agzegp Projection from frame: 725 mm Rotation radius at full projection: approx. 135° Height of mounting plate above floor 1250 to 1650 Vertical guide pillar: Ø 30 mm Horizontal guide pillars: Ø 20 mm Mounting plate for tool holder: 305 x 90 - Can be moved in three axes (horizontal, vertical, rotatable) - Rotary encoder BAUMER type GI355.022C315 for rotary and horizontal movement - Balancer for vertical movement - Adjustable load capacity - for weightless suspension of small appliances - Ball bearing guide in all axes - mounted in a frame made of BOSCH system aluminum profile, cross-sections 45x45 / 90x45 / 180x45 / 90x90 mm - Height-adjustable feet Space requirement L x W x H: 1450 x 1250 x 2480 mm dead weight: 180 kg good condition

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Cgedpfx Aexy Tmuogzjp

Year of construction: 2023, condition: used, machine/vehicle number: H300SV23-17, The KTP 300 S is a production press with side extraction of the drawing cushion, capacity 300 t, stroke 1000 mm, max. tool size 1400 x 1200 mm, max. tool weight 5,000 kg, power supply 400V, 50/60Hz, 36kW. Cgodpfxeyn Ni Ao Agzep

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 03/2027, cutting width (max.): 25 mm, type of input current: three-phase, total length: 750 mm, total width: 620 mm, total height: 860 mm, input frequency: 50 Hz, space requirement height: 860 mm, space requirement length: 750 mm, space requirement width: 620 mm, Bread Slicing Machine with Circular Blade Wabäma Model: R 300 EX The all-rounder among bread slicing machines Codpfxsryr Hlj Agzsgp EX model for integration into the sales counter! Maximum slices: 140 pcs/min. Mobile machine Adjustable slice thickness from 4 to 25 mm Connection: 400V, 16A-CEE plug Dimensions: 620 x 750 x 860 mm (W x D x H) Used machine We offer the largest selection of bread slicing machines!

Condition: new, new ! all stainless steel 2 speeds (20 and 40 rpm) Cjdpoyfnyhofx Agzegp 2 mixing directions 3,3 / 4,4 kw inspection gantry safety lid CE-approved Suitable for loader with “Easy Connect” overall dimensions (l x w x h) : 1.750 x 950 x 1.650 mm (open lid: H: 2.100 mm) infeed height : ± 1.350 mm dimensions drum : (l x w x h) : ± 860 x 670 x 565 mm + Loader for eurobins

Condition: new, NEW ! PLC control with 50 programs loading : max. 160L with vacuum pump “Busch” 21m³ 2,3 kW weight 380 kg dimensions (l x w x h) : ± 1.320 x 1.380 x 1.540 mm adjustable speed from 2 up to 9 rpm a wide variety of products like: all kinds of salads, meat and fish, can be mixed / tumbled with the Bartumb. Cgodpjyfnvvsfx Agzsp

Condition: used, Year of construction: 2001, Used horizontal bending machine from Sterli Bieger Cjdpfjyg Ntrsx Agzegp Type: 300 HE/CE Capacity: 30 tons Including bending dies: V45, V80 and V125 mm

Condition: used, mileage: 414,035 km, power: 221 kW (300.48 HP), first registration: 06/2005, fuel type: diesel, tire size: 315/80/22.5, fuel: diesel, color: other, gearing type: mechanical, emission class: euro3, suspension: steel-air, Year of construction: 2005, Equipment: ABS, air conditioning, cruise control, electric window regulation, fog lights, = Additional Options and Accessories = - ADR (European agreement concerning the international carriage of dangerous goods by road) - Aluminum fuel tank - Low noise (noise-reduced) Cgjdsyk A N Ujpfx Agzop - Speed limiter - Air suspension - Radio/CD player - Electrically adjustable side mirrors - Sun visor - Analog tachograph = Further Information = Axle Configuration Tire size: 315/80/22.5 Brakes: Disc brakes Front axle: Suspension: Leaf spring Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Suspension: Air suspension Weights Unladen weight: 10,140 kg Payload: 15,860 kg Gross vehicle weight (GVW): 26,000 kg Condition Damages: none Identification Registration number: TEL947

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 5,000 rpm, travel distance X-axis: 270 mm, travel distance Y-axis: 120 mm, spindle motor power: 22,000 W, total height: 2,330 mm, overall weight: 10,000 kg, product length (max.): 3,530 mm, number of axes: 5, This 5-axis Okuma LT 300 MY was manufactured in 2021, featuring a max turning diameter of 350 mm and a bar capacity of 65 mm. It supports spindle speeds up to 5,000 RPM and includes a motorized 12-position turret. Ideal for complex turning operations, the machine also offers rapid traverse rates and a substantial distance between centers of 1,200 mm. Consider the opportunity to buy this Okuma LT 300 MY horizontal turning machine. Contact us for more information. • Distance between centers: 1,200 mm • Max turning diameter: 350 mm • Rotating diameter over guards: 550 mm • Spindle / counter-spindle: ASA 8 • Bar capacity: 65 mm • Tailstock / counter-spindle travel (W axis): 940 mm • X axis travel: 270 / 230 mm Cedpfx Agjx Imriszjgp • Y axis travel: ±60 mm • Z axis travel (ZA / ZB): 930 / 920 mm • Rapid traverse (X / Z / W): 30 / 40 / 40 m/min • Rapid traverse Y axis: 26 m/min • Turret: 12 positions, motorized, VDI 40 • Turret indexing time: 0.25 s • Live tooling speed / power: 100–4,500 rpm, 7.0 / 3.3 kW