Used Lathe Vertical for sale (12,339)

Condition: good (used), Year of construction: 2014, functionality: fully functional, The following used CNC vertical turning machine EMAG VL2 is for sale. Manufacturer: EMAG Model: VL2 Serial Number: 105958 Year of Manufacture: 2014 Weight: 6,000 kg Gijdpfx Aex N Rv Iodmol The machine is equipped with a robotic automation system. - 100% quality control ensured - Dry machining - No emulsion required - Air blow-through via the spindle (vertical spindle) - Dimensional tolerance (bore) +/- 0.006 mm The machine had a new monitor installed one year ago (cost: €9,000) Description: This is a reliable EMAG VL2 CNC vertical turning machine, ideally suited for precision machining of small and medium-sized parts. The machine is in good technical condition, has been regularly serviced, and is immediately available for use. The machine is suitable for both single-part and series production. The machine had to be disconnected from the power supply, so the spindle cannot be photographed at the moment, as access is not possible without power. The machine has produced components for companies such as Lindenmayer, Bosch, and Siemens, including parts for washing machines, among others.

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm Gijdpfx Adevi Hryemsl face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: good (used), Year of construction: 2006, machine/vehicle number: 66078, TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840 Speed: 5,500 rpm Swing diameter: 260 mm X-axis travel: 626 mm Z-axis travel: 250 mm Spindle bearing diameter: 32 mm Godpfx Ajwfdddedmeil Nominal speed: 1,200 rpm X-axis rapid traverse speed: 60 m/min Z-axis rapid traverse speed: 30 m/min Turret positions: 12 MACHINE DETAILS Machine length: 1,685 mm Machine width: 2,400 mm Machine height: 2,850 mm Machine weight: 8 t EQUIPMENT - Spindle head with short taper DIN 55026: A6 - WPS pallet conveyor - KNOLL system (2010) - SAUTER turret (12 places) - Documentation available

Condition: used, Year of construction: 2009, faceplate diameter 1250 mm turning height 1250 mm Control 0i-TD Fanuc max. torque at faceplate 12500 Nm Gedpewlvifjfx Admsil max. turning diameter 1600 mm max. workpiece weight 5000 kg table speed 2- 300 min/-1 x-axis 1475 mm z-axis 900 mm rapid traverse 10 m/min spindle cone ISO BT50 tool capacity 12 pos. total power requirement 75 kW weight of the machine ca. 32 t dimensions of the machine ca. 4,7 x 5,8 x 5,5 m CNC vertical lathe with 12 positions ATC. Spindle reception is BT 50. Control: Fanuc 0i-TD

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, P. CARNAGHI AC 20 CNC VERTICAL LATHE Table Ø 2,000 mm. Max. turning Ø 2,500 mm. Max. turning height 1,600 mm. Gedpfxetq Eg Re Admsil Max. height under crosspiece 1,600 mm. Table capacity 20 Tons Table motor power 59 kw. Table speed 2.7 ÷ 130 rpm. N. 1 vertical cnc ram carriage: - vertical stroke 1,200 mm. - section 240 x 240 mm. Cross travel 1,450 mm. Cnc ECS Total weight 35 tons. Year of construction/revision 1980/2016 Complete with: - chip conveyor - Tool Holders 12 nos.

Condition: used, Year of construction: 2014, functionality: fully functional, Travel path - X axis: 740 mm Travel path - Z axis: 400 mm Giodsw Imtfjpfx Admel Travel path - Y axis: 30 mm (optional) Chuck diameter: 260 mm Max. turning diameter: 200 mm Spindle speed: 4,500 rpm Tool speed: 6,000 rpm Rapid traverse Z-axis: 15 m/min Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 30 mm Machine weight approx.: 9,000 kg

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand SIEMENS Model Sinumerik 810 D Main Drive Spindle speed range 4000 Spindle motor power 1.2-12 kW Number of axis 2 Movement X-Axis Movement 850 mm X-Axis Feed Force 2500 N X-Axis Rapid Traverse 3000 mm/min Z-Axis Movement 550 mm Z-Axis Feed Force 2500 N Z-Axis Rapid Traverse 3000 mm/min This IRLE Facing Lathe was manufactured in 1998. Ideal for vertical turning applications, this machine offers robust construction and reliable performance. Consider the opportunity to buy this IRLE Facing Lathe vertical turning machine. Contact us for more information. Application Types Turning Gijdpfx Asx D D Hajdmjl

Condition: good (used), functionality: fully functional, Original CNC (not a retrofit from conventional to CNC) Control: Siemens 8-M Faceplate diameter: 3500 mm Max. turning diameter: 4000 mm Max. turning height: 2500 mm Vertical stroke of ram: 1600 mm Horizontal stroke of ram: 2200 mm Ram cross-section: 250 x 210 mm Gjdjxyh Hvopfx Admeil Min. internal diameter: 360 mm Vertical travel of cross-slide: 2000 mm/min Chuck motor power: 71 kW Chuck speed: up to 90 rpm (2-speed gearbox) Table load capacity: 40 tons Feed rate: 1000 mm/min Rapid traverse: 6000 mm/min

Condition: excellent (used), Year of construction: 2010, Fully automatic integrated bar loader Pietro Cucchi for Schutte SF 67 multispindle lathe Giodpfx Aex Rrtwjdmsl

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, TECHNICAL DATA MACHINE SPECIFICATION WORKING RANGE • Max chuck diameter. 260 mm • Max swing diameter. 260 mm • Max machining diameter. 220 mm • Max part length. 110 mm • Travel X axis. 570 mm • Working stroke Z axis. 250 mm • Travel Z axis. 200 mm CLOSED STANDARD AUTOMATION • Number of carrier frames for workpiece diameter 80 to 220 mm. 14 pieces • Number of carrier frames for workpiece diameter 30 to 160 mm. 18 pieces • Number of carrier frames for workpiece diameter 30 to 85 mm. 30 pieces • Max total load. 120 kg PICK UP SWITCH POINTS • Pressed. 1 mm • Over pressed. emergency stop. 5 mm • Pickup spring travel max. 30 mm CHAIN SYSTEM • Chain length. 182 inches • Chain pitch. 1 inch (25.4 mm) • Chain tension at 20 carrier frames. 400 N • Chain wheel. Z equals 30 • Gear ratio. i equals 100 • Motor revolution per belt revolution. 540 LOADING TIME • Loading time. 2 to 4 seconds MAIN SPINDLE • Spindle flange according to DIN 55026. Size 6 • Spindle bearing front diameter. 110 mm • Max spindle speed. 4500 rpm (5500 optional) MAIN DRIVE. AC ASYNCHRONOUS MOTOR. TYPE 1MB241H • Power at 100 percent duty cycle. 18 kW • Power at 40 percent duty cycle. 27 kW • Torque at 100 percent duty cycle. 202 Nm • Torque at 40 percent duty cycle. 303 Nm • Corner speed. 850 rpm FEED DRIVE • Rapid feed speed X axis. 60 m per minute • Rapid feed speed Z axis. 30 m per minute Giedpex Elf Aofx Admsl • Feed force X and Z. 5.5 kN • Ball screw diameter X and Z. 40 mm • Acceleration. 5 m per second squared TOOL CARRIER • Cylindrical tool shank mount according to DIN 69880. twelve positions • Shank diameter. 40 mm • Max tool length including holder. 190 mm • Max swing diameter. 740 mm TOOL CARRIER WITH DRIVEN TOOLS • Cylindrical tool shank mount according to DIN 69880. twelve positions • Shank diameter. 40 mm • Max speed. 6000 rpm • Corner speed. 3000 rpm • Max torque at 10 percent duty cycle. 45 Nm • Max torque at 40 percent duty cycle. 30 Nm • Max torque at 100 percent duty cycle. 15 Nm ELECTRICAL EQUIPMENT • Operating voltage. 400 to 480 V • Control voltage DC. 24 V • Control voltage AC. 230 V • Frequency. 50 or 60 Hz • Connected load. 42 kW • Supply fuse rating. 63 A • Electrical design standard. VDE 0113 DIMENSIONS AND WEIGHT • Length. 2680 mm • Length including chip conveyor. 3820 mm • Width. 2040 mm • Height. 2400 mm • Machine weight. approx 6500 kg NOISE EMISSION • According to DIN 45635. • Measured sound pressure level. 78 dB(A) during continuous cutting on a cylindrical test part.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Z-axis: 300 mm, TECHNICAL DETAILS X-axis travel: 660 mm Z-axis travel: 300 mm Chuck diameter: 250 mm Swing diameter: 270 mm Gsdpfxsxy Hp Ne Admoil

Condition: used, Year of construction: 2014, Year : 2014 CNC Siemens 840D Swing over bed 1030 mm Maximum turning diameter 690 mm Turning length 1 693 mm Y-axis 370 mm Spindle bore 106 mm Bar capacity through draw tube 94 mm Spindle speed 3 500 rpm Spindlemotor S1/S6 40¤ AD 59/74 kW Milling spindle 12000 rpm Milling spindle power S6 40% AD 22 kW Milling spindle taper CAPTO C6 B-axis -120º, + 105º Gjdpfx Adox Nqwxomeil ATC magazine with 81 positions Linear scales in X,Z,Y Tailstock MK6, travel 180 mm Machine dimensions L W H 5,4 x 3,86 x 3,76m Machine weight 22 800 kg

Condition: excellent (used), Year of construction: 1980, turning height: 3,250 mm, workpiece weight (max.): 40,000 kg, turning diameter over cross slide: 5,200 mm, SK 50 Faceplate diameter 4750 mm Swing diameter 5200 mm Max. height under cross rail 3250 mm Max. height under tool post 3050 mm Chuck Speed up to 32 rpm Max table load capacity 40 000 kg Ram travel vertical 1400 mm weight of the machine ca. 110 tone Gedpowchkisfx Admjil

Condition: good (used), Year of construction: 2008, feed length X-axis: 575 mm, feed length Y-axis: 90 mm, feed length Z-axis: 300 mm, Order No. 3.2-115 1 used CNC Lathe GILDEMEISTER type CTV 160, built 2008 1 used CNC Lathe GILDEMEISTER type CTV 160, built 2008 Siemens 840D control 3-jaw chuck Chip conveyor Coolant device Siemens 840D control 3-jaw chuck Coolant device Gjdpfx Adoubvv Tomoil Chip conveyor Technische Daten / technical details: Drehdurchmesser / turning diameter 160 mm X / x 575 mm Z / z Y/y 300 +-90 mm mm Drehzahlbereich / spindle speed range 6000 UpM / rpm Weight of the machine ca. / weight ca. 6000 kg Technical data, accessories and description of the machine are not binding. Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1961, turning diameter Max. 4200 mm faceplate diameter 3700 mm turning height Max. 2600 mm workpiece weight Max. 35 t Power 80 PS DIGITAL CONTROL DISPLAY Largest diameter with the crossbeam supports: 4200mm Largest turning diameter with side support: 3900mm Largest turning height above faceplate: 2500 Side support Gjdpfxouddnvs Admsil 1 vertical grinding ram: 1200mm stroke (out of operation) 1 turning ram: 1400mm stroke

Condition: excellent (used), Year of construction: 1994, Rexroth System 200 BTV30 control system Swing over bed: 160 mm Swing over cross slide: 250 mm Gisdpfewhrg Ejx Admel Chuck diameter: 160 mm Turning length: 300 mm Spindle speed: 8000 rpm 12-station turret with driven tools Workpiece conveyor belt Chip conveyor Various tool holders

Condition: ready for operation (used), Year of construction: 2022, operating hours: 6,000 h, functionality: fully functional, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 30 m/min, turning diameter: 450 mm, total length: 8,720 mm, total height: 3,888 mm, total width: 4,325 mm, type of input current: three-phase, torque: 585 Nm, overall weight: 18,000 kg, controller model: Siemens 840 D sl, For sale: Hessapp DVT400, year of manufacture 2022. Equipped with a Siemens 840 D sl control system. Gjdpsw D Apcsfx Admoil Features: - Infeed and outfeed conveyor - Chip conveyor (discharge right side) - 2x tool carriers, 12x VDI50 each The machine is powered and can be inspected.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 100226, The submission of a bid obligates you to collect on time in week 1 or week 2 of 2026! MACHINE DETAILS Godpfx Aexzt R Njdmeil Total weight: 10,000 kg Electrical connection Mains type: 3~ Frequency: 50 Hz Operating voltage: 400 V General control voltage: 24 V Valve control voltage: 24 V Connected load: 36 kW Rated current: 56 A Main fuse: 80 A Lighting connection: 24 V Lighting connection power: 18 W

Condition: used, Year of construction: 2007, functionality: fully functional, feed length Z-axis: 1,250 mm, turning diameter: 3,200 mm, turning height: 2,000 mm, faceplate diameter: 3,200 mm, DOUBLE RAM VERTICAL CNC LATHE KOLOMNA 1532 T KOLOMNA VERTICAL LATHE • Table Ø 3,200 mm • Maximum turning diameter 3,200 mm • Maximum workpiece height 2,000 mm • Two CNC-controlled rams Godpfx Aex Nhm Redmsil • Ram travel 1,250 mm • FAGOR 8070 CNC • Motor power 115 kW • Mechanical, hydraulic, electrical, and electronic retrofit new in 2007 • Chip conveyor • Complete enclosure • Cooling system • Work light • Air-conditioned electrical cabinet

Year of construction: 1961, condition: ready for operation (used), Faceplate diameter: 1255mm, with complete documentation, without accessories. The machine is slightly worn and shows signs of use, the side support is missing, one spindle nut is defective, the gears and bearings of the table have been recently overhauled, and the machine has been serviced internally and externally. Viewing on site is possible. Gjdox Hhx Uopfx Admsil

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101458, Machine Data Sheet General Information Manufacturer: EMAG Machine Type: CNC Vertical Lathe Model: VL5 S Serial No.: 101458 Year of Manufacture: 2008 Technical Data Max. Chuck Diameter: 260 mm Max. Swing Diameter: 260 mm X-Axis Travel: 570 mm Godextpi Sopfx Admjil X-Axis Working Stroke: 250 mm Z-Axis Travel: 200 mm Conveyor Maximum Permissible Total Weight: 120 kg Conveyor Maximum Diameter: 220 mm Front Spindle Bearing Diameter: 110 mm Main Drive AC Asynchronous Motor Max. Speed: 4,500 (5,000) rpm Drive Power at 100/40% Duty Cycle: 18/27 kW Torque at 100/40% Duty Cycle: 202/303 Nm Number of Tools: 12 pcs. Tool Holder DIN: 69880, Diameter 40 mm, Max. Tool Length 190 mm Chip Conveyor (Hinged Belt Conveyor): Discharge Height 1,250 mm Coolant Tank: 315 liters, 8 bar Control: Siemens 840 D Connected Load: 42 kW Voltage: 400V 50Hz Weight: approx. 6,500 kg Required Floor Space: 10 m²

Condition: excellent (used), Year of construction: 2002, Control: Siemens SINUMERIK 840D, C200-4D Spindle speed: 6000 rpm Travel X/Y/Z: 280/280/145 mm Number of turrets: 1 with 6 positions Giodpfx Adoxxmy Sjmel Number of tool stations: 2x4 Chip conveyor Pallet conveyor belt Pallets

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: V16TC1548, workpiece weight (max.): 8,000 kg, workpiece diameter (max.): 2,000 mm, faceplate diameter: 1,600 mm, workpiece height (max.): 1,350 mm, faceplate torque: 18,000 Nm, TECHNICAL DETAILS Faceplate diameter: 1,600 mm Maximum faceplate torque: 18,000 Nm Maximum thread milling diameter: 1,800 mm Maximum facing diameter: 1,800 mm Maximum distance between the faceplate and the clamping surface of the inserted tool slide: 1,550 mm Slide dimensions: 220 × 220 mm Maximum workpiece diameter: 2,000 mm Maximum slide stroke: 900 mm Maximum workpiece height when using the 200 mm tool holder: 1,350 mm Maximum workpiece weight, depending on faceplate rotation: 8,000 kg Maximum tool shank diameter: 40 mm Maximum crossrail travel: 800 mm Crossrail feed rate: 170 mm/min Working feed rate: 1–2,000 mm/min Rapid traverse: 10,000 mm/min Feed per revolution: 0.001–50 mm/rev Rotating tool spindle speed, programmable in two ranges 1st range: 1–1,200 rpm 2nd range: 1,200–2,400 rpm Giodpfx Adjxvxrbsmol Tool holder: ISO50 MACHINE DETAILS Total power requirement: 80 kW Dimensions & Weight Footprint approx.: 4.4 x 4.62 m Machine weight approx.: 25 t EQUIPMENT C-axis

Condition: good (used), Year of construction: 1978, Dörries CTE 1600 / vertical turning lathe (vertical turret lathe), year of manufacture 1978, R & D MTC 3+ control, turning height 1500 mm, control system completely overhauled in 2010, table diameter 1600 mm, turning diameter 1800 mm, table speed: 200 rpm, max. vertical stroke 1200 mm, weight: 25,000 kg, documentation available. Godpfx Ajx Agwledmeil

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S.1003825.001, faceplate diameter: 800 mm, workpiece length (max.): 800 mm, workpiece width (max.): 720 mm, TECHNICAL DETAILS Faceplate diameter: 800 mm Clamping diameter: 800 mm Max. workpiece dimensions: 800 x 720 mm Tool interface: Capto C6 Tool magazine positions: 2 x 80 Giodpsxvrhvsfx Admsl MACHINE DETAILS Total power requirement: 110 kW Dimensions & Weight Approximate machine weight: 37,000 kg / total 52,000 kg Transport dimensions (machine): 5.07 x 2.98 x 3.90 m EQUIPMENT C-axis