Used Lathe Chuck for sale (7,286)

Condition: used, Collet set, chuck collet holder for draw-in collets WEILER Collet chuck, collet holder, collet device Suitable for WEILER Praktikant lathe, year of manufacture 1984 Draw-in collet type: FM 613 / 386E DIN 6341 Collet diameter: 32 mm Collet length: approx. 115 mm Collet thread: TR 32 x 1.5 mm - Collet holder sleeve with MK 5 external taper (Ø 44 mm) - Draw tube with internal thread M 32 x 1.5 mm, handwheel for manual tightening of the collet - 15 pieces FAHRION collets: Ø 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 mm Bedsy Ra Dqopfx Aa Ijdh - fits WEILER Praktikant and should also fit WEILER Matador Total weight: 10.5 kg Very good condition

Condition: used, Dividing Head Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Bedpfx Ajy E T Dgoa Isdh Good condition

Condition: used, Year of construction: 1990, turning diameter 60 mm turning length 200 mm Bsdpfx Aot Hw Atea Isdh number of slides total power requirement 20 kW weight of the machine ca. t dimensions of the machine ca. m

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck -Manufacturer: SFN, magnetic clamping plate permanent magnetic lathe chuck with chuck flange -Type: PUSd-200 -Clamping surface: Ø 200 mm -Bolt circle: Ø 160 mm M10 -Recording dimensions: see photos -Dimensions: Ø 200 x 60 mm Bdjdpfxexd Upfo Aa Ioh -Total weight: 8 kg

Condition: new, Self-centering 4-jaw chuck designed for mounting on lathes, rotary tables, and milling machines. Mounting according to DIN 55029. Hardened and ground working surfaces ensure a longer service life while maintaining accuracy and repeatability. Balanced scroll plate and chuck allow for higher rotational speeds during machining without excessive vibration. Mounts directly to the machine on a CAMLOCK-type spindle nose. Technical data: Parameter Value Unit Lathe chuck cast iron 4-jaw 3744 BISON A 200 mm Ratio 1:4 5 mm Bdedpfx Aaeyw Tupe Ish B 78 mm E 55 mm F 104.8 mm Q 6 J 29 mm Weight 19 kg Equipment: Lathe chuck One-piece hard external jaws One-piece hard internal jaws Key

Condition: used, Power chuck, 3-jaw wedge bar lathe chuck, type presumably Duro 1802W-411592 Chuck No. K W-411592 Outer diameter: 180 mm Inner diameter: 45 mm Thread connection for clamping drive: M52 x 1.5 mm Cylindrical centering ring mount: Ø 140 mm Mounting holes: 3x Ø11 mm Bolt circle: 105 mm Max. speed: 5000 rpm Max. clamping force: 3000 daN Base jaw dimensions (L x W x H): 64 / 74 x 20 x 29 mm - 1 set of chuck jaws consisting of base jaws and reversible hard top step jaws - 1 set of chuck jaws consisting of base jaws and reversible soft top step jaws - 3 sets of soft top jaws Bdjdpfjxcbmhjx Aa Ijh Weight: 21.5 kg Good condition Additional sets of top jaws available under stock number 62056

Condition: excellent (used), Professional dividing table / dividing head BERNARDO BS-1 equipped with a high-quality BISON Ø160 mm lathe chuck. This set is designed for milling machines and precision machining requiring angular division and indexing of parts. Technical data: • Dividing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck speed: 3000 rpm Bjdpfeza Hidox Aa Isdh • Precise angular scale • Dividing plate with indexing crank • Robust cast iron construction • Ability to perform accurate angular divisions Applications: • Milling polygons • Manufacturing gears • Machining shafts and rotating components • Drilling holes at a specific angle • Tooling and production work Condition: • Used item • Fully complete • Normal signs of use visible in the photos • BISON chuck operates smoothly and securely clamps the part • Scales and dividing mechanism are clear and functional The set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank The item being sold is exactly the one shown in the pictures.

Condition: used, 4-jaw chuck WMW type DHK 315x4 with individually and centrally adjustable clamping jaws Diameter: 315 mm Inner diameter: 98 mm Speed: max. 850 rpm - Cylindrical centering ring mount Ø 265 mm - Scroll chuck with centrally adjustable clamping jaws - Individually adjustable clamping jaws via threaded spindle between base and step top jaws - Stepped chuck jaws can be rotated for use as drill or turning jaws Weight: 38 kg Very good condition Bedpfsxciv Rox Aa Ijdh

Condition: used, Year of construction: 1999, Technical details: number of spindles: 6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SG18 Bdjdpfx Aaow Hb Trj Ijh Yob: 1999 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC loading and disloading in position 6 spindle brake Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed - operation through control panel - chip box - counting mechanism Bodsu Idwbepfx Aa Ijdh - elevated platform with stairs i.D. *

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations Bsdpfx Ajwz Rifoa Iedh - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck, magnetic round chuck -Magnetic clamping plate: permanent magnetic lathe chuck with chuck flange -Recording: MK4 -Clamping surface: Ø 160 mm -Dimensions: Ø 160 x 205 mm Bdodpswn D Twofx Aa Ish -Weight: 9.8 kg

Condition: used, 3-jaw wedge-bar lathe chuck FORKARDT TYPE F+160 No. 1659 181 Bedpfxof Axprs Aa Ijdh Identical to Forkardt, SMW, or Röhm Diameter: 160 mm Internal diameter: 45 mm Chuck flange: short taper DIN 55022, size 6 1 set of chuck jaws consisting of base jaws and hardened step jaws for turning 1 set of chuck jaws consisting of base jaws and soft step jaws for turning - central adjustment Weight: 11 kg Good condition

Condition: used, 1 set of soft top jaws, chuck jaws RÖHM Type: Duro 160/3 Suitable for 3-jaw wedge bar chucks Bsdpfexpqz Uox Aa Isdh Chuck diameter: 160 / 180 mm Jaw length: 84 mm Jaw width: 39 mm Height without step: 95 mm Height with step: 99 mm Slot width: 8 mm Step width: 18 mm Hole spacing: 32 mm Holes: Ø 9 mm (for M8 bolts) - 1 set of steel top jaws - used, machined jaw set Base jaw dimensions L x W x H: approx. 84 x 39 x 99 mm Weight: approx. kg Multiple sets of top jaws available under stock number 62056 Top jaws compatible with RÖHM, FORKARDT, SCHUNK, or SMW

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, turning diameter over cross slide: 950 mm, turning length: 4,000 mm, turning diameter: 950 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 2 rpm, travel distance Z-axis: 4,000 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret Bsdpfx Aezzq Sqea Ijdh 2 x Fixed Steadies

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0520090257, center height: 230 mm, spindle bore: 58 mm, swing diameter over cross slide: 270 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 30 rpm, type of input current: three-phase, swing diameter over bed slide: 460 mm, turning diameter over cross slide: 270 mm, overall weight: 1,810 kg, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, input voltage: 400 V, rotational speed (min.): 30 rpm, rotational speed (max.): 2,000 rpm, total height: 1,370 mm, total length: 2,750 mm, total width: 1,080 mm, bed width: 300 mm, quill diameter: 60 mm, quill stroke: 130 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, Torno Mecânico Convencional C6246VX / 1500mm - Ano 2020: Torno mecânico universal com 460mm de giro sobre a bancada e 1500mm entre pontas. Motor trifásico 400V/50Hz. Equipado com visor digital (DRO) de 2 eixos, torre porta-ferramentas de mudança rápida, sistema de refrigeração e proteção de segurança articulada no fuso. Máquina em bom estado de conservação, adquirida em 2020 e utilizada em ambiente de I&D. Ideal para oficinas de manutenção, ferramentaria ou produção de pequenas/médias séries. O comprador deve organizar/tratar da recolha. IVA incluído no preço Conventional Mechanical Lathe C6246VX / 1500mm - Year 2020: Bdedpjzxrkiefx Aa Ioh Universal mechanical lathe with 460mm swing over bed and 1500mm between centres. Three-phase motor, 400V/50Hz. Equipped with a 2-axis digital readout (DRO), quick-change tool post, coolant system, and a hinged safety guard over the spindle. Machine in good condition, purchased in 2020 and used in an R&D environment. Ideal for maintenance workshops, toolrooms, or small/medium-batch production. Buyer must arrange collection. VAT included in price.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Very well-maintained lathe with powered tools and a sub-spindle. Year of manufacture: 2004 Mazatrol 640T NEXUS control 500 mm between centers Maximum turning diameter: 380 mm 2x hydraulic Kitagawa chucks Measuring arm Powered tools with VDI40 adapter (VDI tools are available at an additional cost) C-axis Sub-spindle Everything has been cleaned and is ready for use! Bdsdeyx U Itjpfx Aa Ieh Machine weight: approximately 5 tons Forklift available for loading the machine! Machine price: €31,950 excluding VAT (no tooling included) Machine + VDI40 toolholders (13 driven + 17 fixed): €38,500 excluding VAT This machine is available for inspection in Genk!

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Bdjdpfszkbirox Aa Ieh Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Poreba TCE-200 Roll Lathe 80 ton capacity 2000mm Swing 8000mm Between Centres Bsdpfx Ajzwmnysa Iedh Single saddle 4-jaw chuck Tailstock Swarf conveyor Date of manufacture: 1973 Serial No. 1164-003

Condition: used, Doosan Lynx 220B CNC Slant Bed Lathe With Doosan-Fanuc I Series Control With Ø135mm Collet Chuck. Maximum Swing Ø510mm. Maximum Swing Over Cross Slide Ø290mm. Maximum Turning Ø320mm. Maximum Turning Length 305mm. Bar Capacity Ø51mm. Axis Travel 'X'=175mm, 'Z'=330mm. Rapid Feedrates 'X'=30m/min, 'Z'=36m/min. Spindle Nose A2-6. Maximum Spindle Speed 5,000rpm (15kW Motor). Spindle Nose A2-6. Spindle Through Bore Ø61mm. 12 Station Turret. Tailstock Quill Ø80mm, Quill Travel 80mm, Taper MT4. Tool Shank 25 x 25mm. Boring Bar Sleeve Ø40mm. S/No. ML0014-005414 (2012). Low Running Hours 7,360. Bodpfxez E Rx Ao Aa Iodh With Coolant System, Tool Setter, Parts Catcher, Seoam CAH-08 3 Jaw Power Chuck, Tailstock, Foot Switch, Quantity Of Assorted Hard/Soft Jaws & Manuals. Approx Dimensions L2,325 x W1,600 x H1,600mm. Weight 2,900kg.

Condition: used, Safop Leonard-90TT/CNC horizontal axis turning lathe Model Leonard-90TT/CNC 70 ton capacity 1750mm swing 9000mm between centres Twin saddle Hydrostatic bed 1700mm diameter 8-jaw chuck Siemens Sinumerik 840 DSL controls Date of manufacture: 2013 Serial No. 3432 Swarf conveyor Bjdpfx Aaszwmw Uo Ijdh Safety enclosure Quantity of tooling Euro cold twin fan chiller

Condition: excellent (used), Year of construction: 2013, XYZ 1630 SLX CNC Lathe Bjdpfxoz E R N Us Aa Iodh New 2013. Swing 400mm x 760mm B.C. Spindle speeds & bore 150- 2500rpm & 54mm. C/w 3jaw chuck, quick change tool-post.

Condition: ready for operation (used), Year of construction: 1971, Center lathe, manufactured by VOEST ALPINE, type DA 210, year of manufacture 1971. Chuck: 315 mm, tool holder: Multifix B with 2 tool pockets. Center height: 210 mm Distance between centers: 1000 mm Spindle bore: 46 mm Spindle speeds: 28 - 2000 rpm Further details can be found in the data sheet. Machine in good, ready-to-use condition. Machine documentation available. Bdedpfx Aoz Eilnoa Ijh Weight: approx. 1200 kg

Condition: good (used), functionality: fully functional, Internal article number: 26095 Lathe Weiler Condor 81, Type B Serial number: 84112 The machine is equipped as follows: Three-jaw chuck, Weiler 160 Base holder, Multifix "B" MK3 drill chuck Chuck guard 3-axis digital display (K&C) 4x Multifix "B" steel holders Collet set with draw tube Technical data: Center height 165 mm Center distance 750 mm Bodpfx Aasz E Nxzo Ijdh Spindle speed: 22 to 2800 rpm Spindle bore 40 mm Short taper spindle head, DIN 55027, size 5 with bayonet lock Tailstock, MK 3 Feeds from 0.015 to 0.46 mm/rev Dimensions (L x W x H): 200 x 100 x 130 cm Weight: approx. 1000 kg In good technical condition and fully functional! You are welcome to inspect the machine while it is powered on, in our heated warehouse covering an area of over 500 m².

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Bdjdpfxey Nfqmo Aa Ijh Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.