Used Laser Board for sale (6,962)

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, overall weight: 100 kg, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, type of cooling: water, input current: 16 A, laser power: 300 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, travel distance X-axis: 120 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 800 mm, continuous power: 9 kW (12.24 HP), Equipment: type plate available, We are selling a like-new ALM300. It underwent a complete service in September 2026 and a new laser unit, including a flash lamp, was installed. The price was €12,500.00 excluding VAT. Djdezyzwnopfx Adhecn Includes special equipment: Tilting-swiveling objective, LED-UW Ergonomic wedge, 5-25 degrees Aluminum light case Camera set ALFT-HDMI Optional, if required: Laser protection curtain, 2x 4300x2100mm, €3,000.00 Extraction and filter system LN 260 ZA-W3, €3,000.00 (filter in like-new condition) Laser safety glasses, 2x, €500.00 New price: €130,000.00

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 350 h, overall weight: 2,359 kg, input voltage: 400 V, For sale is a high-quality, professional Just Laser core laser with 400W CO2 laser power. This machine is ideally suited for precise laser cutting and engraving in a wide variety of materials. Dcodpsznbzvefx Adhen The system is in very good condition and has seen little use due to its low operating hours (approx. 400 hours). It is ready for immediate use. The system features 2 cutting heads for the most precise results: 1. Standard laser head for cutting wood, MDF, HDF, plywood, solid wood, acrylic, leather, cardboard, many plastics, etc., and engraving wood, glass, leather, textiles, rubber, melamine, cardboard, acrylic, ceramics, and many plastics. 2. Metal cutting head with automatic height adjustment for steel, aluminum, copper, and brass. 3. K-Vision camera option Table size: 2540x1320 The system also includes: * 5 kW frequency-controlled extraction system * Activated carbon and cartridge filters * 5 kW Mark screw compressor Inspection is possible by appointment. Cutting thickness: up to 24 mm for wood, 3/4 mm for steel sheet. According to the manufacturer, it is the fastest large-area engraving machine on the market, with a speed of 3.8 m/s.

Condition: excellent (used), Osai Neomark 400 Nd-YAG laser marking machine The NeoMark 400 Performance system was developed for printed circuit board marking. By completely eliminating mechanical movements of the laser, extremely high-resolution markings are possible. The internal conveyor belt is designed to perform width registration for various board types up to a board length of 320 mm. The user interface consists of a console with a separate keyboard to control the laser source, the control systems, the marking systems, and the automation responsible for the board movement via a PC. The NeoCut management software, developed based on NC², the control software of the NEO family, is a simple and intuitive interface for programming the machine and subsequent production monitoring. Dcsdpfx Adoxbck Eshon The Neomark is also equipped with an extraction system that can be connected to an external extractor or a central extraction system to capture the fumes and dust generated during the process. Main features: Manufacturer: Osai Type: Marking laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Voltage: 230 V Rated frequency: 50 Hz ± 2% Maximum electrical absorption: 4 kW Minimum flow rate for pneumatic system: 20 Nl/min Working area: up to 320 x 320 mm Laser safety class: Class 1 (EN 60825-1) Access to the working area: Front door with laser filter Loading and unloading of the printed circuit board PC with LCD monitor and keyboard Dimensions: 1200 x 1310 x 1800 mm Weight: approx. 1300 kg Laser completely rebuilt Motor of the beam expander renewed All hoses for cooling replaced More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Dedpfxjzg D I Aj Adhocn NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 6 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, travel distance Z-axis: 500 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 355 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, UV Fiber Laser 355 nm, 6 W – NEW, SK LASER KOLLTRONIC with Workstation, Made in Germany Laser Source IPG – Made in Germany Laser Safety Class 1 Workstation: - Combined sit/stand workstation with ergonomic legroom Djdpoyiz Dzofx Adhecn - Fully enclosed aluminum profile construction - Front door with laser protection glass for clear visibility - Bright workspace lighting - Dimensions: H 1760 × W 920 × D 940 mm - Work platform: Stainless steel plate with 25 mm hole grid (710 × 400 mm) - Rear service door, screwed for easy part loading - Motorized Z-axis: travel distance 500 mm (focus depending on lens) - Extraction nozzle DN50 (extraction optional) - Safety (PL4) - Emergency stop - Interlock with 2 standard relays - Safety relay for door monitoring UV Fiber Laser: - Wavelength: 355 nm - Power: 6 W 40 kHz - Pulse energy: 20 µJ - Pulse frequency: 10–300 kHz - Air cooled - Pilot laser red light + 2 distance lasers for focus adjustment (Laser class 2) - Laser head manually adjustable in Y-axis Scanner & Optics - F-Theta lens F = 160 mm, anti-reflective protective glass - Marking field: 110 × 110 mm Control: - Windows 11 - 19" TFT monitor, keyboard, mouse - Interfaces: RS232 / Ethernet / USB - KOLLTRONIC marking software: text, logos, QR/Data Matrix, barcodes Operation: - 230 V / 50 Hz - 15–35 °C Condition: - New machine - CE compliant · Made in Germany

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, type of input current: AC, total height: 1,300 mm, total width: 600 mm, total length: 1,100 mm, input voltage: 230 V, overall weight: 150 kg, type of cooling: water, electrical fuse: 32 A, space requirement height: 1,300 mm, space requirement length: 1,500 mm, laser power: 200 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, Laser welding machine with 200 watts of laser power - Programmable spot diameter - Motorized focus adjustment - Includes rotary axis with three-jaw chuck - Machine (year of manufacture 2025) from our showroom with minimal operating hours - Lamp-pumped YAG laser - Spot welding machine for the finest welding tasks - For jewelry, optics, precision engineering, etc. - Welding spot from 0.1 to 3 mm - For practically all metals (steel, stainless steel, silver, gold, titanium, etc.) - Includes optical microscope (10x) - Additional CCD microscope with crosshair Dedpfx Adez Hwzmehocn - Current, pulse width, repetition rate, and frequency adjustable on the control panel - Includes protective gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200 watts of power - External cooling - Power connection 230 volts / 32 amps - German menu Machine dimensions approx.: Width: 60 cm, Height: 120 cm, Depth: 110 cm, Weight: approx. 150 kg

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,288 h, laser power: 300 W, travel distance X-axis: 700 mm, travel distance Z-axis: 650 mm, number of axes: 3, This 3-axis SEI Laser INFINITY 5070 V300 was manufactured in 2022. It features a working area size of 500 x 700 mm and a Z-axis guide of 650 mm. The machine is designed to support materials with a maximum weight of 40 kg/m². If you are looking to get high-quality laser cutting capabilities, consider the SEI Laser INFINITY 5070 V300 CO2 laser cutting machine we have for sale. Contact us for further details. • Working area size: 500 x 700 mm • Material support table: 550 x 750 mm • Max. weight of material to process: 40 kg/m2 • DSP running time: 6744 h • Power ON time: 4579 h • Execution time: 1288 h Dsdpfx Adszdi I Nehjcn

Condition: good (used), Year of construction: 2011, machine/vehicle number: 11095150, IPG Laser GmbH Dcsdpferq D D Ejx Adhen used 4kW laser source with cooling unit 400-460V AC 3P/PE 50/60 Hz 30.8A year of construction 2011 DWG number: G25-16-100920-2 Cooling unit: LC170.01-W3.5 Year of construction 2010 3/PE - 400V 50Hz 21,8A 4pcs available

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 200 W, machine/vehicle number: ELXX-25100004, For sale is a professional, pulsed laser cleaning machine (pulse laser) of the type GL-PM-200 from the manufacturer EraserLaser GmbH. The unit dates back to the 2025 model year, has very few operating hours, and is in excellent, fully functional condition. In contrast to continuous CW lasers, this pulsed system is ideally suited for extremely precise and material-friendly cleaning. It is the ideal solution for demanding tasks where the base material (e.g., sensitive molds, historical components, weld seam preparation, or precision tools) must not be subjected to any thermal influence or material removal. Rust, paint, oils, and oxide layers are removed precisely and without leaving any residue. Product benefits & highlights: Maximum precision without heat input: Thanks to the fine adjustment of pulse width (20–500 ns) and frequency, the cleaning can be precisely tailored to sensitive surfaces. Dcodpfx Asziww Asdhsn Compact & flexible: The laser is housed in a robust enclosure and can be ideally used in mobile applications. Extensive parameter control: Parameters such as laser power, scan speed, frequency, and track density (Spiral Series) can be precisely controlled via the intuitive 7-inch touch display. Quick access to memory locations: Up to 5 user-defined work modes can be saved to allow quick switching between different cleaning requirements in everyday work. Easy maintenance & care: Low maintenance thanks to reliable air cooling. Integrated preview laser for precise alignment of the cleaning area on the workpiece. Technical data at a glance: Model: GL-P-M-200 Laser type: Pulsed fiber laser (pulse laser), Laser Class 4 Wavelength: 1064 nm Laser power: 200 watts (continuously adjustable from 10% to 100%) Laser frequency: 5 kHz – 4000 kHz Pulse width: 20 ns – 500 ns Cleaning area (length x width): Variable, adjustable up to 100 mm x 20 mm Fiber length (hose assembly): 4 to 10 meters Cooling: Air-cooled Power connection: 220V AC (Schuko plug, fuse rating min. 16A) Condition & scope of delivery: Condition: Very well-maintained, used condition, hardly used, visually and technically flawless. The protective lens and optics are clean and fully functional. Scope of delivery: Laser cleaning system GL-P-M-200 including hose assembly and cleaning gun. Important safety note: Operating a system of Laser Class 4 requires the mandatory use of approved laser safety goggles (DIN EN 207 for the wavelength range of 1064 nm) as well as compliance with applicable occupational safety regulations (including respiratory protection/extraction).

Condition: good (used), Year of construction: 2020, In this offer you purchase a used collaboration board "Cisco Webex Board 85S" Object of sale: 1 x Cisco Webex Board 85S: approx. 21 boards in stock also available in size 70" and 55" Without stand/wall mount The Webex® Board is an all-in-one device that offers everything you need to collaborate with your teams in physical meeting rooms. You can present wirelessly, use whiteboards and make video and audio calls. And it securely connects to your virtual teams via the Webex service or via your Webex app-enabled devices, so you can take your meetings and content on the road. Dedpfx Adjqydw Ijhscn Condition: This offer is for a used device that may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for functionality Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. Dedpfsziwwiox Adhscn The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 3,000 W, Description BAISON G24C: (3 kW) PROFESSIONAL TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND AUTOMATIC UNLOADING SYSTEM This machine is also for profile, tub and different shape. Tube size range: Round tube: φ10-φ240mm Square tube: □10*10-□220*220mm Channel Steel: 22#（need nesting software and specialized fixtures） Angle Iron: 10#（need nesting software and specialized fixtures） I-beam:22#（need nesting software and specialized fixtures） H-beam:22#（need nesting software and specialized fixtures） Max.Tube Cutting Length 6.500 mm Effective cutting diameter for round pipes Ø10 mm – Ø240 mm Effective cutting size for square pipes □10 mm – □220 mm Max. Single Tube Weight 300 kg X/Y/Z axis travel 350 / 6,500 / 500 mm Ultra-short Tail Material ≥100 mm Positioning accuracy ±0.03 mm/m Repeatability accuracy ±0.03 mm Maximum travel speed Y axis 100 m/min Universal maximum rotation speed 140 r/min Maximum acceleration 1.0G Maximum pipe feed length 6,500 mm Total electrical power of the machine 24.8kw/59A Machine size 10.151 x 3.362 x 2.400 mm Weight of the machine 4.596 kg (Including Semi-automatic loading system and automatic unloading system) Configuration: Dcodpfjvcbrhox Adhon ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 3 kW Laser head with automatic focus – RAYTOOLS Controller system – FSCUT 3000DE-G Automatic self-centering pneumatic chucks Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Servo motors – BOCHU Reducer – TECHMECH Guide rail – SHAC Proportional valve – SMC / FESTO Welded and heat-treated machine bed – BAISON Wireless remote controller High precision X/Y transmission mode with rack and rails – K.H Computer with Windows 11 interface, Internet & WIFI Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Semi-automatic loading system with chain Automatic unloading system: 3.000 mm with following motor Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Safety relay Complete CE standard Assisting gases (16 bars air compressor can be also used for cutting): - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar) - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Dcsdpfx Aey Efbkedhon

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: DS 013.0091, RAW MATERIAL TOWER PME YOC 2017 TWIN SCREW EXTRUDER WEBER Type : DS 1327 YOC 2017 DIE NORDSON YOC 2017 CALANDER OMIPA Serial 09.38A24 YOC 2017 ROLL PLANA OMIPA Serial 09.38A24 YOC 2017 THICKNESS & DENSITY MEASUREMENT SEREL Serial 4031 YOC 2019 AIR BLOWERS & COOLING CHAPEL OMIPA Serial 22.10A88 YOC 2017 PULL ROLERS AND EDGERS OMIPA Serial 11.35A19 YOC 2017 2 BREAKERS TRIA YOC 2017 GUILLOTINE OMIPA Serial 16.30A19 TRANSPORTATION BELT OMIPA Serial 17.02A49 YOC 2017 10x TRANSPORTATION BELT BIELE WEIGHING BELT BIELE STACKER / ROBOT FANUC Serial E16Y3413 Type A05B-2612-B081 YOC 2016 Load 140 kg 2 SIDE SANDER COSTA Serial LB643001A Type KK9CCCC2200 YOC 2017 PORTAL STACKER BIELE Serial A6213-24 Dcedpfxsz Dt Spe Adhen YOC 2017 LASERPRINTER MASCA ID TECHNICAL DETAILS Width : 2000 mm Extruder output : 1250 kg / hr ( possibly 1400 kg / hr ) Raw material PVC Raw material supply is a mixture of powders, ground recycled, micronised recycled Output is PVC plates size 2000 x 1390 x 3,75 mm Elecricity consumption : 41 000 KWH for 5 days production incl startup and stop of the line incl sander and extraction

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, pipe diameter (max.): 6,000 mm, cutting speed: 8,500 mm/min, workpiece weight (max.): 200 kg, input voltage: 380 V, input frequency: 50 Hz, overall weight: 4,500 kg, total length: 11,380 mm, total width: 2,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, fume extraction, nozzle changer, safety light barrier, 2 Chuck Professional Pipe Laser Cutting Machine Max length of pipe: 6000mm*φ240mm Repeat positioning accuracy: ≤0.03mm Positioning accuracy: ≤0.05mm Max positioning speed: 85m/min Max acceleration: 1.0G Max rotating speed of chuck: 100r/min Round pipe: Φ10mm-Φ220mm Square pipe: 10mm*10mm ~ 150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flat oval tube: Short axis≥15mm, long axis≤210mm Channel steel: Max 20# I-beam: Max 18# H steel: Max 175*90mm High-quality chuck 1)High clamping accuracy; 2)Sealed and dustproof; 3)Various types of pipes can be clamped; 4)Low failure rate; High-strength cage structure welded bed, high temperature annealing, gantry milling processing, anti-vibration, anti-torsion and anti-deformation; Professional industrial computer, resistant to high temperature and dust; Dust removal Hollow rear chuck, dust is removed from the inside of the pipe, the dust removal effect is good, meet the requirements of environmental protection; Djdpfx Adsv Hkmvshjcn Short tail function Support two kinds of short tail functions: rear chuck inserted short tail, front chuck movable short tail; Ensure that workpieces & pipes can achieve short tails, reducing material waste.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, laser power: 6,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,000 mm, working length: 12,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, ACME Tube and Profile Laser System – 3-Chuck System with 45° Laser Head The ACME tube and profile laser system is a powerful CNC fiber laser cutting machine designed for high-precision processing of tubes and profiles across a wide range of sizes and applications. Technical Features and Specifications 3-Chuck System (all chucks traversable) For maximum flexibility, precise material handling, and virtually waste-free production (zero-tail cutting). Vertical linear guides Robust machine construction ensures high stability, accuracy, and vibration damping, even with large workpieces. Processing Diameters (optionally available): Ø 280 mm Ø 360 mm Ø 550 mm Laser Power Options: 3 kW 6 kW 12 kW Maximum Processing Length: Up to 12,000 mm (12 meters) for long stock and industrial applications 45° Laser Cutting Head Enables miter cuts and complex cutting geometries without additional post-processing. Automation & Material Handling Semi-automatic loading and unloading system Efficient material infeed and removal to minimize setup times and manual intervention. Integrated small parts conveyor Clean separation and automatic discharge of finished parts and remnants. Quality & Safety Components from renowned international manufacturers High-quality laser sources and cutting heads from Max Photonics and Boci CE-compliant machine design in accordance with EU machinery directives Key Advantages at a Glance Dedsy Ixvyjpfx Adhscn High precision for complex tube and profile geometries Efficient production through semi-automatic handling Flexible configuration for various material diameters and power options Reduced material waste through optimized chuck technology

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, laser type: fiber laser, laser power: 40,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, power: 12,000 kW (16,315.44 HP), overall weight: 5,000 kg, Equipment: cooling unit, X axis travel distance (mm): 3500mm Y axis travel distance (mm): 28000mm Z axis travel distance (mm): 850mm A axis travel distance (mm): ±90° C axis travel distance (mm): ±90° Dcedpfxovzyf Dj Adhsn U axis travel distance (mm): 30mm Maximum speed: 40m/min Positioning accuracy: ±0.1mm Support steel types: H-beam, channel steel, I-beam, T-beam, angle steel Maximum size of steel section: 1000mm*400mm Maximum weight of steel: 5tons

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, travel distance X-axis: 1,524 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 100 mm, EC3 Single Platform Fiber Laser Cutting Machine The EC series is an economical single-platform laser cutting machine independently developed and produced by Baison Laser, suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, and brass. It meets various cutting needs for most of sheet metals. TECHNICAL SPECIFICATIONS Features • Compact and complete CE electrical panel with safety relay on the back side of the machine equipped with AC unit, protected from dust. • Operating panel with large LCD display and movable arm mount, easy to use. • Loading weight up to 1000kg • Auto-focus laser head with automatic detection • Industial components with high durability • Both sides access for dust trolleys • Emergency botton on remote control Processing Format & Working Range Processing Area (L×W): 3.050 x 1.530 mm X-axis Stroke: 1.524 mm Y-axis Stroke: 3.050 mm Z-axis Stroke: 100 mm Max. loading weight: 1.000 kg Accuracy X/Y Axis Positioning Accuracy: ±0.03 mm/m X/Y Axis Repositioning Accuracy: ±0.03 mm Dcjdoxfi Irepfx Adhon Speed Max. Moving Speed: 100 m/min Max. Acceleration Speed: 1.0 G Power Parameters Power Supply: 12.3kW/32A (380V/50Hz/3Phases) Protection Grade: IP54 Weight & Size Machine Size: 4.530 * 2.280 * 1.310 mm Machine Weight: 2.000 kg Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, functionality: fully functional, Year of construction: 2025, input voltage: 380 V, input frequency: 50 Hz, total length: 13,000 mm, total width: 3,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, GS13030CS MAX Ultra-Large Format Single-Platform Sheet Cutting Machine Dedpfev Hnpzex Adhjcn Smooth and delicate cutting section, burr-free Equipped with bevel cutting head and system High-quality modular drag chain cables Beam safety light curtain Fully automatic grease injection system

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm Dodpfxoz Aha Io Adhocn • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, laser wavelength: 1,070 nm, Equipment: cabin, Laser engraving machine with 30-watt laser power - Exhibition machine / used demonstration unit with approximately 1 hour of use - Worth taking a look - Includes Windows 11 PC 64-bit (including monitor, keyboard, and mouse) - Fully installed and adjusted - Engraving software in German - Very easy to operate - Simply turn on and start - Fiber laser source with 30 watts for high-contrast and fast markings with very high resolution (see images) - Wobble function, e.g., for cleaning metal components - Deep engraving up to 3 mm possible - For engraving on many metals (stainless steel, brass, aluminum, etc.) and many plastics - Heavy-duty industrial quality - Complete system / ready for immediate use - Work area approximately 390 x 270 x 350 mm (L x W x H) - Clamping surface with fastening threads in a 50 mm grid - LED work area lighting - 50 mm pipe connection for smoke extraction - Engraving area up to 170 x 170 mm - Motorized adjustment of the focus position - Includes foot switch to start the engraving process Please also note our attractive leasing/hire-purchase offers. Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Dcjdod Ha I Sopfx Adhen Machine dimensions approximately: Width: 450 mm Height: 800 mm Depth: 750 mm Weight: approximately 80 kg

Condition: new, functionality: fully functional, control type: CNC control, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, table length: 3,050 mm, table width: 1,530 mm, working length: 3,050 mm, working width: 1,530 mm, cutting speed: 120 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.02 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, IMPACT 3015A Fiber laser cutting machine suitable for high-precision cutting of metal plates, with high photoelectric conversion rate. It is a new energy-saving and environmentally friendly product, and one of the world’s leading technology products. It is suitable for cutting metal plates such as stainless steel, carbon steel, alloy steel, silicon steel, aluminum, copper, brass, titanium alloy, galvanized sheets, etc. Unmatched Accessibility - Because the machine is an "open type" (without a full protective enclosure), operators have 360° access to the cutting bed. This makes loading raw sheets and unloading finished parts significantly faster and easier, especially when using a forklift or overhead crane. Space Efficiency - The 3015 model is designed with a compact footprint. Without the bulk of a large safety cabin or a dual-shuttle table system, it fits comfortably into smaller workshops where floor space is at a premium, providing a high "power-to-square-foot" ratio. Cost-Effectiveness - Open-type machines generally have a lower initial investment compared to fully enclosed or exchange-table models. They are also easier to maintain, as all mechanical components (rails, racks, and motors) are readily accessible for routine cleaning and lubrication. Efficient and precise cutting of medium and thin plates: • Easy access for loading and unloading the material from all 4 sides; • Auto-focus laser head; • Automatic edge detection; • Nesting included for optimizing the drawings and optimize material usage; • Easy to operate; • CE standard. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display 18.5 inch Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system Voltage stabilizer & regulator unit CE mark Price is EXW (Stock Europe), Include loaded on truck. Dsdpfx Aeyhclwedhjcn Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Year of construction: 2017, condition: ready for operation (used), laser power: 600 W, Automation system manufactured in 2017. This CLEANLASER CL 600 features a laser wavelength of 1064 nm. With 3 units available, this system is designed for precision applications. If you are looking to get high-quality automation capabilities, consider the CLEANLASER CL 600 machine we have for sale. Contact us for further details. - 3 units available- Main Laser System Model: CL 600- Laser Power (max. av.): 600 W- Wavelength: 1064 nm- Pulse Frequency: 20-40 kHz- Pulse Duration (min.): 45 ns- Pulse Energy (max.): 33 mJ- Laser Safety Class: Class IV Laser Product- Main System Power Supply: 3x400 VAC, N, PE- Main System Frequency: 50 Hz / 50/60 Hz (correspond to separate units)- Main System Power Consumption: 10 kVA- Optic System Model: intelliSCAN 30- Optic Wavelength: 1064 nm- Optic Work Distance: 250 mm- Hydraulic Pump Drive Motor Brand: Leroy-Somer- Hydraulic Pump Drive Motor Weight: 490 kg- Hydraulic Pump Drive Motor Output: 90 kW (50 Hz, 1460 min-1) / 103 kW (60 Hz, 1780 min-1)- Hydraulic Pump Drive Motor Voltage / Connection: A380V / A400V / Y690V (50 Hz), A415V / A440V / A460V (60 Hz)- Hydraulic Pump Drive Motor Rated Current: 170A / 162A / 94A (50 Hz), 159A / 168A / 161A (60 Hz)- Hydraulic Pump Drive Motor Protection Class: IP 55- Hydraulic Pump Drive Motor Max Ambient Temperature: 40 °C- Hydraulic Pump Brand: Brueninghaus Hydromatik GmbH (The Rexroth Corp.)- Hydraulic Pump Displacement (Vg): 125 cc- Hydraulic Pump Nominal Speed (n): 1800 rpm- Hydraulic Pump Pressure (DR): 276 bar- Hydraulic Pump Fluid Type: mineraloil- Package sale possible (, ) Dcodsz Aq Hqopfx Adhon

Condition: used, Eos EOSINT plastic laser sintering system P380, fully operational with extensive accessories. Dodpfxeyghhus Adhjcn

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System Dodpfx Aez Ahccsdhecn • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-PhaseAdditional photos are available upon request.