Used Laminating Press for sale (27,274)

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Iedjulwzmopfx Ag Ujht Dimensions (estimation) length 4800 mm width 5600 mm height 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Baler Presto CC 13 V, Year of manufacture: 2003 Technical data: Manufacturer: Presto Model: CC 13 V Year of manufacture: 2003 Pressing force: 13 t Cycle time: 24 s Drive power: 4 kW Feed opening: 780 x 750 mm Feed volume: 0.39 m³ Tying: 3-fold, automatic Throughput capacity for bulk density of: 35 kg/m³ - 1.7 t 60 kg/m³ - 2.5 t 100 kg/m³ - 3.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 250 kg Dimensions: 2800 x 1050 x 1830 mm (LxWxH) Machine weight: approx. 1900 kg Materials: paper, cardboard, film Note: The baler is in good condition and has been function-tested. You can find a video on our website or YouTube channel. Inspections, including under power, can be arranged at any time by appointment. Upon request, we can also perform tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on the manufacturer’s information. We accept no liability for the provided information or potential errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are available by appointment. Iedex Uz Dtjpfx Ag Usht Sale is ex works, prepayment only, without warranty or guarantee.

Condition: used, Year of construction: 1984, total length: 3,500 mm, total width: 1,400 mm, total height: 2,500 mm, Weight: 6.800 kg - Year: 1984 - Documentation available: No - CE certificate present: No - Serial number: 12552 - Drive system: Teach-in - Control system brand: Delem Ijdpsx R S Nrefx Ag Usht - Control system type: DA-22 - Power [kW]: 5.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 80 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Digital readout - Motor power: 5.5kW - Transport dimensions: 3500mm x 1400mm x 2500mm (l x w x h) - Transport weight [kg]: 6800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm table surface area 2800 x 1600 mm ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t Ihodsvut N Aopfx Ag Ust required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation, stored in dismantled condition (no PLC + main motor available)

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: CNC control, controller manufacturer: Delem, bending force (max.): 50 t, working width: 1,500 mm, stroke length: 215 mm, number of axes: 4, Equipment: CE marking, foot remote control, Used Trumpf Trumabend V 50 Hydraulic cnc 50ton x 1.5metre Press Brake For Sale Iodpfxsx Nip He Ag Ujht Brand: Trumpf Type/Model: Trumabend V 50 Year:2000 Trumabend V 50 Technical details Capacity: 50ton x 1.5metre: Folding length: 1500 mm CNC Brand: Delem Total axis: 4 Y1, Y2, X and R Axis

Condition: good (used), Pneumatic press, pneumatic punch press, multi-function punch press, punch press, universal punch press, punching machine, hydraulic press, basic press, punching press -Manufacturer: Schüco, base press with base Ihsdpfx Aex Tdmnog Ust -Item No.: 280 226 with base 299 504 -Stroke: 20 mm -Pressing force: 32 kN -Operating pressure: 7 bar -Operation: via foot switch -Receiver: Groove 16/28 mm, see photo technical drawing -Dimensions: 400/400/H930 mm -Weight: 91 kg

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Ihodpfxsx A U Nco Ag Ust Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, with lifting-tilting device Technical Data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Ijdpfxex Uz Das Ag Uoht Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Binding: 3-fold, wire, manual Throughput capacity at bulk weight: - 35 kg/m³: 1.3 t - 60 kg/m³: 1.7 t - 100 kg/m³: 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. You can find a video on our website or YouTube channel. Viewings, including under power, are possible by appointment at any time. On request, we can also carry out tests with your material for an additional fee. If you have any questions about the machine, we will be happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Fridays from 08:00 to 13:00. Please note: All technical data is based on manufacturer specifications. We assume no liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Condition: used, Year of construction: 2009, total length: 5,500 mm, total width: 2,300 mm, total height: 2,900 mm, Weight: 18.700 kg Ihodpfx Agexrl Hde Ust Price: On request - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 83261 - Drive system: CNC - Press force [ton]: 250 - Max. working width [mm]: 4300 - Column gap [mm]: 3800 - Backgauge depth [mm]: 1000 - Options: Finger safety guard - Transport dimensions: 5500mm x 2300mm x 2900mm (l x w x h) - Transport weight [kg]: 18700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: reconditioned (used), functionality: fully functional, Bun Divider Rounder Fortuna Automat A 4 E Dough dividing and rounding machine TOP model with rounding deactivation Head cleaning with electric motor Dividing head completely overhauled, 30-piece with NEW stainless steel knives Dough input: 1200 to 3600 g robust technology DGUV V3 safety tested with return button Ihjdpfxjyalbrs Ag Uet Connection: 400V, 16A CEE plug Dimensions approx.: 770 x 730 x 1500 mm (WxDxH) Refurbished used machine with warranty + spare parts service Option: Stainless steel stand Rounding plate Service package Maintenance contract Spare parts box Delivery service Training & commissioning You’ll find a TOP selection of bun divider rounders with us!

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 1772, Size 36 x 52 cm, standard dampening Ihodpfx Ajx I A N Reg Ujt

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Ijdpfx Aovtpq Heg Ueht Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Baler Presto HPK 50 HS, Year of Manufacture 2014 Manufacturer: Presto Model: HPK 50 HS Year of Manufacture: 2014 Drive: 30 kW Pressing Force: 50 t Operating Hours: 7145 Filling Opening: 1600 x 650 mm (L x W) Channel Cross Section: 700 x 950 mm Maximum Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Capacity at 35 kg/m³: 5.5 t/h Ihedpsx Uzzxjfx Ag Ujt 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (L x W x H) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET Bottles Remarks: Blades and counter-blades as well as all sliding plastics have been replaced. The baler is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. Operating manuals and CE declaration are available. Inspections, including under power, are possible by appointment at any time. Upon request, we also conduct tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer’s specifications. We assume no liability for the information provided or for any potential errors. The offer is non-binding and subject to prior sale and revocation at any time. Viewings are possible by arrangement. Sale is ex works against advance payment, without warranty or guarantee.

Condition: used, Year of construction: 1990, total length: 1,860 mm, total width: 940 mm, total height: 1,410 mm, Weight: 1.200 kg Press brake + sheet metal shear Combintation-Machine - Year: 1990 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 3.0 - Press force [ton]: 34 - Max. working width [mm]: 1300 - Column gap [mm]: 1450 - Throat depth [mm]: 100 - Backgauge depth [mm]: 600 - Tools included: Yes - Transport dimensions: 1860mm x 940mm x 1410mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Iodpfsxx Smdox Ag Ueht VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2004, operating hours: 140 h, condition: like new (used), machine/vehicle number: 627161, Size 53 x 74 cm, CP 2000, Alcolor vario dampening, Technotrans Combistar Beta C, Autoplate, Blanket wash, Roller wash, Impression cylinder wash, Heidelberg Alphatronic 200 powderspray, Perfecting 4-4 or 8-0 Ihsdefd Rukspfx Ag Ust

Condition: good (used), Year of construction: 2016, Avermann Baling Press, Model AVOS 1410 BR5 – 45/80, Pressing Force 80 t, Year of Manufacture 2016 Technical Data: Manufacturer: Avermann Maschinenfabrik Model: AVOS 1410 BR5 – 45/80 Year of Manufacture: 2016 Pressing Force: 80 t Drive Power: 45 kW Feed Opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale Dimensions: 1,100 x 750 mm (W x H), length variable Bale Weight: up to 600 kg, depending on material Tying: 5-fold vertical, automatic Machine Dimensions: approx. 10,850 x 2,400 x 3,800 mm (LxWxH) Machine Weight: approx. 18,000 kg Remarks: The baler is still in operation and can be inspected upon request. It is expected to be available from the end of February 2026. Ihjdpfsx Uzy Uox Ag Uot A matching WESTERIA conveyor belt is optionally available. The main cylinder was replaced in November 2025. Additional photos available on request. Please feel free to contact us. Please note: All technical data are based on information provided by the manufacturer. We assume no liability for the accuracy of these details or for any errors. This offer is subject to change, prior sale, and withdrawal at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: used, total length: 3,000 mm, total width: 600 mm, total height: 2,130 mm, Weight: 2.500 kg - Documentation available: No - CE certificate present: No - Serial number: 2439 - Drive system: Conventional - Press force [ton]: 83 - Max. working width [mm]: 2500 - Column gap [mm]: 2700 - Transport dimensions: 3000mm x 600mm x 2130mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Ihsdjxr Dnmjpfx Ag Uot Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2017, operating hours: 86 h, functionality: fully functional, machine/vehicle number: 5180, Size 63 x 92 cm, V-type feeder, Suction tape feeder board, Preset sidelay, Paper size preset, Ryobi fully automatic plate changers, Plate register remote control, Ryobi PCS-G printing control, PDS-E spectrojet, Ryobi D-matic alcohol dampening system, Ink roller temperature control, Automatic blanket wash, Automatic roller wash. Iodpfx Agewzvzmj Uoht

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Technical data: Manufacturer: Presto Model: CC 20 M Iedpfex Uzynex Ag Usht Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Tying: 3-fold, manual Throughput capacity at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a service fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information given or for any potential errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. The sale is ex location, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 229 h, functionality: fully functional, machine/vehicle number: DS001155, Size 53 x 74 cm, Prinect Press Center, Axis Control, Autoplate XL, Alcolor dampening, cooling and recirculation unit, perfecting 4-4 or 8-0, excellent condition Ihjdpfx Aowuth Rsg Ujt

Condition: good (used), Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Baler Presto CC 40 M Technical specifications: Ihodpfx Ajx Uzxkeg Ust Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Tying: 4-fold, polyester strapping, manual Throughput at bulk density of 35 kg/m³ – 1.8 t/h 60 kg/m³ – 2.5 t/h 100 kg/m³ – 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are available. Note: Channel exit is fully automatic and self-regulating. Inspections, including powered demonstrations, are possible at any time by prior arrangement. Upon request, we can also perform tests with your material for a nominal fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday between 08:00 and 14:00, and Friday from 08:00 to 13:00. Please note: All technical data are based on manufacturer information. We do not assume any liability for the supplied information or possible errors. This offer is subject to change, prior sale excepted, and may be withdrawn at any time. Inspections are available by appointment. Sale is ex works, advance payment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 9,100 mm, total height: 2,900 mm, total width: 4,600 mm, product height (min.): 20 mm, product length (max.): 6,200 mm, product width (max.): 2,600 mm, overall weight: 40,500 kg, Double production solar panel laminating machine Ihedpfx Asxzrvksg Uot The laminator is used for manufacturing solar modules or composite materials. Multiple layers of materials are bonded together and fed into the laminator. The materials are laminated under the influence of pressure and temperature. The lamination process is conducted under vacuum to prevent unwanted entrapped gases in the final product. Finally, the finished laminate is conveyed out of the laminator. The machine comes with many spare parts and can be seen in operation.

Condition: like new (used), Year of construction: 2017, operating hours: 57 h, functionality: fully functional, machine/vehicle number: LS001402, FULL UV Size 53 x 75 cm, Anicolor, Wallscreen K Press Center XL 2, Alcolor VARIO dampening system, Combistar cooling and recirculation unit, Inking unit temperature control, Water-cooled machine, Autoplate PRO, Blanket wash, Roller wash, Impression cylinder wash, Coating unit, 2x UV interdeck dryer, 1 x UV end dryer, Powder spray, Extended delivery X2 module, Sheet brake, FOIL Print kit, Airstar Pro, Cleanstar Steel plate in feeder and delivery Iedex An Urspfx Ag Ujht

Condition: good (used), Year of construction: 2011, operating hours: 160 h, functionality: fully functional, machine/vehicle number: GS000891, Size 36 x 52 cm, Alcolor Vario dampening system, Technotrans cooling and recirculation, inking unit temperature control, Anicolor inking units, double sheet control, sidelay control, blanket wash device, roller wash device, impression cylinder wash device, Autoplate, IR dryer, extended delivery. Iodpsx Apa Aofx Ag Uoht

Condition: like new (used), Year of construction: 2012, operating hours: 120 h, functionality: fully functional, machine/vehicle number: 550429, Size 72 x 102 cm, Wallscreen, Press Center, Instant Gate, Color assistant, Alcolor dampening, Autoplate, Autoregister, Preset Plus Feeder, Preset Plus Delivery, Technotrans Combistar Beta 140 L air-cooled, Heidelberg Washstar for blanket and impression cylinder and roller cleaning with cloth, Powderspray Weko AP 500, UV interdeck dryer after unit 4, one interdeck dryer, Cleanstar Compact powder extraction, Max speed 16,500 s/h, Autoregister, Antistatic in feeder and delivery, Airstar Pro water-cooled, Combistar. Ihodpex An Sdjfx Ag Ust