Used Kunzmann for sale (73)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Tool Milling Machine Kunzmann WF 610M with Heidenhain TNC 128 Control – Like New Condition – Only 182 Spindle Hours – CE Compliant!! Technical Data: - Year of manufacture: 2020 Machine number: 610978 - Milling table clamping surface: 800 x 425 mm Number of T-slots: 6 Iedsw Ifdiepfx Aacjih Slot width: 14 H7 Slot spacing: 63 mm Maximum load: 300 kg - Spindle speed range: 1–4500 rpm - Feed rate: up to 5 m/min - Travel (X/Y/Z): 610 / 400 / 450 mm - Vertical and horizontal quill: SK40 - Hydraulic clamping system - Weight: approx. 2,200 kg - Dimensions (approx.): 2 x 2 x 2 m - Main drive motor (100%/25% duty cycle): 8.5 / 16.2 kW Equipment and Accessories: - Heidenhain TNC 128 CNC control - Heidenhain electronic handwheel - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: For sale is a Kunzmann WF 610M tool milling machine equipped with a Heidenhain TNC 128 control unit. The TNC 128 provides numerous dialog-guided cycles with graphical simulation for fast and user-friendly data input, e.g. various drilling cycles, thread cutting, hole circles, linear hole patterns, rectangular pockets, rectangular tenons, and surface milling. This universal milling machine is in near-new condition. The control system is very user-friendly. Additionally, the machine is equipped with hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal mode is very easy thanks to the swiveling vertical head. The linear guides are lubricated regularly via the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann under power on site.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 380236, No minimum price – guaranteed sale to the highest bidder! Iiedpfxow H Nwrj Aaceh TECHNICAL DETAILS Spindle speed: 30 – 1280 rpm Note: Further information about spindle speeds can be found in the attached images.

Condition: used, Year of construction: 1972, Milling machine Iiedpfxjudb N De Aacjh used Make:Kunzmann Model: UF6N year of construction: 1972 Technical data: Table longitudinal travel automatic: 440 mm Table longitudinal travel by hand: 450 mm Transverse table travel 200 mm Table vertical travel horizontal/ vertical 465/500 mm Table size 860x240 mm Table swivels 45° on both sides Distance table/spindle 430 mm Spindle holder ISA 30 Quill stroke 60 mm Tiltability of the spindle head +/- 90 18 spindle speeds horizontal 32-1342 rpm 18 spindle speeds vertical 72-2888 rpm 6 automatic feeds lengthwise 13.12-164 mm/min 6 automatic cross feeds 26.24-328 mm/min. Spindle drive 1.8/2.6 kW with inclinable vertical milling head/clamping vice/ Counter holder/collet chuck with collets Weight approx. 850 kg Dimensions approx. 1400x1900x1800 mm

Condition: good (used), travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, mount diameter: 40 mm, total height: 2,000 mm, total width: 2,000 mm, total length: 2,000 mm, table width: 700 mm, table length: 425 mm, power: 5 kW (6.80 HP), X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 700 x 425 mm Spindle nose: SK 40 Spindle speeds: 1 - 4000 rpm Spindle stroke: 60 mm Featured with: - ISO toolholders - Cooling unit - User Manuals Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg Ijdpfxjrxry Tj Aacsih

Condition: excellent (used), Year of construction: 2009, operating hours: 2,542 h, functionality: fully functional, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned, powered on, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Iedpfxow D D Sfe Aacoih Spindle speeds: 1,000 – 4,500 rpm Feeds: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirement: approx. 2,000 x 2,000 x 2,100 mm Total connected load: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety enclosure – LED machine lamp

Year of construction: 2001, condition: ready for operation (used), X-axis: 400mm, Y-axis: 350mm, Z-axis: 400mm, table dimensions: 650mm/350mm, tool holder: SK 40, spindle speed: 1-4000/min, quill stroke: 60mm, max. feed: 2000mm/min, control: Heidenhain TNC 124, connected load: 5.5kW, dimensions: 2000mm/1000mm/2100mm, weight: 1.8t. The machine is not functional, errors occur repeatedly: Problems with the movement monitoring of the Z and Y axes, gross positioning error on the Z axis, faults when moving the control housing. The operational readiness controller is missing and appears continuously when switching on. A reference run is possible after several attempts. The spindle gear is worn out. On-site inspection is possible. Iedpfx Aasuqacwscoih

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year of Manufacture 2010, Excellent Condition with Tooling, CE-Compliant!! Technical Data: >> Year of manufacture: 2010 >> Fixed angular table >> Infinitely variable spindle speed up to 4000 rpm >> Infinitely variable feed on 3 axes from 0 to 2000 mm/min >> Travel (X/Y/Z): 400/350/400 mm >> Rapid traverse (X/Y/Z): 5 / 5 / 4 m/min >> Table surface: 650 x 350 mm >> Table load capacity: 250 kg Iodpfx Aaow Id Dzjcsih >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic drawbar system >> Weight approx. 1700 kg >> Floor space required: approx. 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Equipment: >> Heidenhain TNC 124 control system >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system >> Tool holders, hydraulic vise, clamping tools About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control system. This universal milling machine is in very good original condition. It comes from a facility where it was only used occasionally for training purposes. The control system is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal is very simple, thanks to the swiveling vertical head. All guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our facility.

Condition: good (used), Year of construction: 2001, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, CNC milling machine KUNZMANN - WF7/3 X-Axis: 600mm Y-Axis: 400mm Z-Axis: 400mm Table Length:650mm Table Width: 400mm Table load: 250 Stroke pinole:40mm Iodpfx Aaewq Ndgscjih Length: 2800mm Width: 2400mm Height: 2100mm Weight: 2000kg

Condition: used, Year of construction: 1990, Motor output 5 kW Weight 1.500 kg Isdpfowgnz Nex Aacoih Control cnc

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Year of production: 2005 Manufacturer: GUK-Falzmaschinen Griesser & Kunzmann GmbH & Co. KG Machine availability – on request; Machine in use; possibility to carry out work tests during inspections; Good technical condition; Folding machine manufactured by the renowned German company GUK equipped with a high pile feeder (sheet picking with a suction roller from above) FL2-50, 2 folding pockets aggregates, pocket with maximum working widths of 50 cm and mobile chute delivery. Folding machine GUK model FA 50/6-6 FL2-50 – infeed width 500 mm (6+6 folding pockets). Maximum input format: 500 x 850 mm Minimum input format: 105 x 145 mm Minimum folding length: 45 mm Feed rate of sheets from feeder: 40 - 180 m/min Maximum performance: 27.000/from sheet A4 Power supply: 400 V/50 Hz Machine equipment: High pile feeder FL2-50; Batch counter. Multifunction counter programming the operation of the machine. Ability to fold sheets in groups (lots) of the given number in each lot, with stepless adjustment of the spacing between parties. I. folding unit FA 50/6, 6 folding pockets; Sound reduction hood, top. Isdpfxerx S Iwe Aacsih II. folding unit FA 50/6, 6 folding pockets Sound reduction hood, top. Mobile chute delivery S 520. To be added after I or II folding station.

Condition: excellent (used), Year of construction: 2012, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 410294, feed length X-axis: 400 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 4 m/min, table width: 350 mm, table length: 650 mm, overall weight: 1,700 kg, input voltage: 400 V, space requirement width: 1,916 mm, space requirement length: 2,225 mm, space requirement height: 1,953 mm, input frequency: 50 Hz, Equipment: rotational speed infinitely variable, For sale is a Kunzmann WF 400 M universal milling and drilling machine with Heidenhain TNC 128 path control. Iedpewywmnofx Aacjih

Year of construction: 2000, condition: ready for operation (used), Folding units buckle plate/sword: 6/2, max. sheet dimensions X/Y: 800mm/540mm, min. sheet dimensions for parallel fold: 150mm/210mm, min. sheet dimensions for cross fold: 150mm/210mm, min. sheet dimensions for triple fold: 210mm/300mm. Folding capacity with parallel fold/cross fold: 40000/22000 sheets/h, paper weight range: 40g-300g/m². Machine dimensions X/Y/Z: approx. 3700mm/1500mm/1700mm, weight: approx. 1300kg, machine working area requirement: approx. 5500mm/3000mm. Including flat pile feeder with suction drum from Kremser, a movable and variable delivery for parallel and cross breaking as well as compressor. Documentation available. On-site inspection is possible. Iodsvwcxljpfx Aacjih

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control System | Excellent Condition | CE-Compliant! Technical Data: - Year of manufacture: 2015 | Machine No. 610398 - Milling table clamping surface: 800 x 425 mm - Clamping slots: 6 - Slot width: 14 H7 - Slot spacing: 63 mm - Maximum load: 300 kg - Spindle speed range: 1 – 4500 rpm - Infinitely variable feed: 0–2000 mm/min Iodpfjwz Eu Nex Aaceih - Rapid traverse (X and Y axis): 5000 mm/min - Z axis: 4000 mm/min - Travel (X/Y/Z): 600/400/400 mm - Vertical and horizontal quill: SK40 - Hydraulic clamping system - Weight: approx. 2025 kg - Dimensions (L x W x H): approx. 2 x 2 x 2 m - Main drive motor: AC three-phase motor - Power rating at 100% duty cycle Accessories and Equipment: - Heidenhain TNC 128 control system - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: Offered here is a tool milling machine Kunzmann WF 600M equipped with a Heidenhain TNC 128 control system. The TNC 128 provides numerous dialog-guided cycles with graphical simulation for quick and easy data entry, such as various drilling cycles, tapping, bolt circles, linear hole patterns, rectangular pockets, rectangular tenons, and surface facing. This universal milling machine is in like-new condition. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operation. Switching from vertical to horizontal is very simple by swiveling the vertical head to the side. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested at our facility. You are welcome to view and test the Kunzmann under power on-site.

Condition: used, Cross support, cross support, cross table, cross slide table Iedpfx Asg Dg Rpeaceih -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420 / H730 mm -Weight: 80 kg

Condition: used, Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 400 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 2,000 m/min, feed rate Z-axis: 2,000 m/min, quill stroke: 60 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 5,000 m/min, rapid traverse Z-axis: 4,000 m/min, total height: 2,000 mm, total width: 2,000 mm, total length: 2,000 mm, table width: 650 mm, table length: 350 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 1 rpm, table load: 250 kg, overall weight: 2,000 kg, Equipment: documentation/manual, Machine condition: The machine is currently still in operation and is in working condition. Key features: Simple operation via TNC124 control Low-maintenance, robust machine design Manual drilling possible (linear machining only) Limitations: Limited machine geometry (somewhat imprecise) Relatively high oil consumption Additional information: Complete machine documentation available. 5 kW motor, SK 40 spindle, Heidenhain TNC124 control, vertical spindle and horizontal spindle - SK40, central lubrication, handwheels, coolant system. Iedpfsw Icwmjx Aacoih

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control Very Good Condition, CE-Compliant! Technical Data: >> Year of Manufacture: 2000 Machine No.: 343030 >> Fixed angle table >> Infinitely variable speed up to 4,000 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Travel X/Y/Z: 400/320/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quills – SK40 taper >> Hydraulic drawbar system >> Weight approx. 1,800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 13 KVA Equipment and Accessories: >> Heidenhain TNC 124 Control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control, and programming examples >> Handwheels >> Coolant system About the machine: Ijdjwzu Skspfx Aacsih For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control system. This universal milling machine is in very good condition. It comes from a facility where it was only occasionally used for training purposes. The control is very easy to operate. Additionally, the machine is equipped with hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple thanks to the swiveling vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Kunzmann under power at our site.

Condition: used, Universal milling head, milling adapter, milling extension, angled milling head, universal milling angled head, milling angled head, milling head, top head Ijdpfsg Dg R Njx Aacsih -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Gear: 31 teeth -Dimensions: 505/180 / H195 mm -Weight: 30 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Kunzmann WF4/3 tool milling machine with Heidenhain TNC 320 contouring control, very good CONDITION, CE compliant!! Technical data: >> Year of manufacture 2008 Machine no. 348084 >> Rigid angle table >> Speed: infinitely variable up to 4500 rpm >> Feed infinitely variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min Z axis 4000 mm/min >> Travels X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: Isdpfev Dut Iex Aacoih >> Heidenhain TNC 320 contouring control >> Hydraulic tension vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions for the control and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the machine: A Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 contouring control is offered. This universal milling machine is in very good condition. It comes from a company where it was only used a little for training. A very easy-to-use control. The machine also has hydraulic tension vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication. The Kunzmann was mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site under power.

Condition: used, Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm -Weight: 28 kg Iijdpfxod Tx E Ne Aacjh

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 310 path control Very good CONDITION CE-compliant!! Technical data: >> Year of manufacture 2004 Machine No. 370506 >> Milling table clamping surface 800 x 425 mm Clamping slots 6 Slot width 14 H 7 Slot distance 63 mm Iisdpfx Aowpkchsacoh Maximum load 300 kg >> Speeds up to 4500 rpm >> Feed range up to 2000 mm/min. Rapid traverse up to 5000 mm/min. >> Travel distances X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic drawbar system >> Weight approx. 2000 Kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: 5.5 KW Accessories and equipment: >> Heidenhain TNC 310 path control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Electronic handwheel >> Heidenhain probe >> Technical documentation, spare part diagrams, operating manual >> Full protection cabin >> Coolant system About the machine: A Kunzmann WF7/3 tool milling machine with a Heidenhain TNC 310 path control is being offered. This universal milling machine is in very good condition. A very easy-to-use control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal is very simple thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann on site under power.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Tool milling machine Kunzmann WF4/3 Heidenhain digital display year of manufacture 1994 very good CONDITION!! Technical data: >> Year of manufacture 1994 >> Rigid angle table >> Speed from 40 to 2550 rpm Biojv7Igbpa >> Continuous feed in X Y Z axis from 0 to 2000 mm/min >> Travels X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1500 kg Iiedpfevyr R Njx Aacoh Accessories and equipment: >> 3-axis Heidenhain digital display >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the machine: Offered is a Kunzmann WF4/3 tool milling machine in very good condition. It comes from a state-owned company where it was only used a little. Converting from vertical to horizontal is very easy, by folding away the vertical head. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Tool milling machine Kunzmann WF 600M with Heidenhain TNC 124 control NEW Mint condition CE-compliant !!! Technical data: >> Year of construction 2013 Machine-No.610261 >> Milling table clamping surface 800 x 425 mm Iijdpfxsurv T Is Aacjh Clamping grooves 6 Slot width 14 H 7 Slot spacing 63 mm Maximum load 300 kg >> Speeds S I 1 - 1125 min-1 Speeds S II 1126 - 4500 min-1 >> Feed rate (potentiometer 100 %) 0 - 2000 mm/min. Rapid traverse X and Y 5000 mm/min. Rapid traverse Z 4000 mm/min. >> Traverse paths X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Approx. dimensions: 2 x 2 x 2 m >> Main drive motor: 5.5 kW Accessories and equipment: >> Heidenhain TNC 124 control >> Heidenhain HR410 electronic handwheel >> Vertical and horizontal hydraulic clamping >> Chip flushing gun >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions >> Coolant system About the machine : We are offering a Kunzmann WF 600M tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in mint condition. It comes from a large company where it was only used a little for training. A very easy to operate control. The machine also has vertical and horizontal hydraulic clamping. It is very easy to convert from vertical to horizontal by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Kunzmann on site under power. Two identical machines are available.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 path control in very good CONDITION CE compliant!! Technical data: >> Year of manufacture 2006 Machine-No. 348013 >> Rigid angle table >> Speed: stepless up to 4500 rpm >> Feed stepless in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min Z axis 4000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m Iijdpfx Aaswrhxfoceh >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 path control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare part diagrams, operating instructions for the control and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the machine: A Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 path control is being offered. This universal milling machine is in very good condition. It comes from a company where it was only used a little for training. A very easy-to-use control. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann live on site under power.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, Kunzmann WF 400M tool milling machine with Heidenhain TNC 128 path control. As good as new. CE-compliant!! Technical data: >> Year of manufacture 2016 (demonstration machine delivered in 2019) >> Milling table clamping surface 600 x 375 mm Clamping slots 5 Slot width 14 H 7 Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed up to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min Z axis 4000 mm/min >> Travels X/Y/Z: 410/350/450 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1700 kg >> Dimensions approx.: 2 x 2 x 2 m Iiodov Ifx Njpfx Aacjh >> Power consumption 12KVA Accessories and equipment: >> Heidenhain TNC 128 path control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication >> Electronic handwheel HR410 >> Chip splash guard cabin >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Coolant system About the machine: A Kunzmann WF 400M tool milling machine with a Heidenhain TNC 128 control is offered. The TNC 128 provides numerous dialog-guided cycles with graphic simulation for quick and easy data entry, e.g.: various drilling cycles, thread cutting, hole circles, rows of holes, rectangular pockets, rectangular tenons and line cutting of surfaces. This universal milling machine was a demonstration machine built in 2016, it was only sold to a training company in 2019. It is in mint condition. A very easy-to-use control. The machine also has hydraulic clamping vertically and horizontally. Converting from vertical to horizontal is very easy, by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann was mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power on.

Condition: new, Year of construction: 2022, functionality: fully functional, Kunzmann WF 410M tool milling machine with Heidenhain TNC 128 control. Brand new and CE-compliant! Technical specifications: >> Year of manufacture 2022 Machine no. 411555 >> Milling table clamping area 650 x 375 mm Clamping slots 5 Slot width 14 H 7 Slot spacing 63 mm Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed X, Y, Z axes (infinitely variable) up to max. 5/5/4 m/min >> Travels X/Y/Z: 410/350/450 mm >> Vertical quill and horizontal quill - SK40 Iiodpfx Ajv Rppkjaceh >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Connected load 13 kVA Accessories and equipment: >> Heidenhain TNC 128 control >> Heidenhain HR electronic handwheel 510FS >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Machine light >> Minimum quantity lubrication >> Counterholder >> Digital display for spindle stroke >> Oriented spindle stop (tapping without compensating chuck) >> Chip protection cabin >> KT 130 edge finder >> Coolant system >> 200 mm rotary table >> Dividing head with 125 mm three- and four-jaw chuck >> 125 mm hydraulic vise About the machine: Offered is a Kunzmann WF 410M tool milling machine, built in 2022, in new condition with a Heidenhain TNC 128 control. The TNC 128 provides numerous dialog-guided cycles with graphic simulation for fast and easy data entry, e.g.: various drilling cycles, thread cutting, bolt circles, hole pattern, rectangular pockets, rectangular tenons, and multi-pass milling of surfaces. A very easy-to-use control system. The machine also has hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal is very easy by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Kunzmann on site with power on.