Used Krones Labelling Machine for sale (119)

Year of construction: 1995, condition: used, Labelling machine with two gluing units for wet-glue labelling of paper neck, chest and back labels onto glass bottles. Additional title: Cold glue labeling Capacity filling line: 12000 bo/h Current: 12 A Voltage: 400 V Frequency: 50 Hz Dsdezg I Itopfx Ab Njwb Formats: 0.5 l Euro, NRW; 0.33 l Giesinger – body, chest and back labels Running direction: links -> rechts Base construction: Carousel-type machine Features: 2 gluing units, protective housing with doors, glue pumps

Condition: used, Year of construction: 1996, Labelling machine for neck, body and back labelling of glass bottles. Additional title: neck-, belly- and back labeling Capacity: 30000 Fl/h Voltage: 220/380 V Frequency: 50 Hz Formats: 0.5 l NRW, 0.33 l Vichy, Running direction: from left to right Operation / Control: Simatic S5 115 U Material: Table top cover, side paneling and conveyor profile in stainless steel Position: free-standing Base construction: torsion-resistant, hot-dip galvanized base frame construction on dome feet with height-adjustable spindles Djdpew Taq Isfx Ab Newb Features: 3 labeling units with label magazines, sheet tin foil, bottle table and table curve, electric height adjustment of machine head, control cabinets, on-site operating station, dating with laser printer (Linx)

Condition: used, Rotary labelling machine for labelling bottles using two cold glue stations. Manufacturer: KRONES Model: PRONTOMATIC Year of manufacture: 1991 Capacity: 10,000 bph Carousel: 12 stations Configuration: 2 x heads for cold glue labels Original electrical documentation. Technical condition: used machine, condition as shown in the photos. Djdpfx Absywckgs Newb

Condition: used, Rotary labelling machine for bottle labelling using two cold glue stations. Manufacturer: KRONES Model: BONAMATIC Year of manufacture: 1994 Capacity: up to 10,000 bottles/h Carousel: 12-station Configuration: 2 x cold glue label heads Operating hours: 31,526 h Dwedpfx Aeywciiob Nob Original electrical documentation. Technical condition: Used machine, condition as shown in the photos.

Condition: used, Year of construction: 2018, Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: empty bottle inspector - Year of manufacture: 2018 - Application: inspection of empty bottles prior to filling; neck ring detection for returnable PET containers included - Inspection modules: base inspection, sealing surface inspection, screw thread inspection (cone optics), sidewall inspection - Sidewall inspection: 2 modules with 4 mirror assemblies and 4 cameras, two views per camera at 45° - Residual liquid and caustic detection: high frequency and infrared - Additional detection: polarising transparent films at container base and sidewall, glass fragments at the container base, scuffing via sidewall camera - Foreign bottle detection at the infeed: container height, contour and colour via camera - Rejection: 3 x Ecopush - foreign containers at the infeed, dirty containers and damaged containers at the discharge - Control: Krones iPanel CD operator terminal, prepared for data connection to a single-station PC (Datalyser) - Test bottle programme with 2D code - Conveyor height: 1,200 mm, adjustment range 1,155 - 1,315 mm - Minimum required room height: 2,810 mm - Overall dimensions: approx. 6,700 x 1,300 x H 2,800 mm - Direction of operation: right-left machine - Power supply: 400 / 230 V, 3/N/PE, 50 Hz, 6 A full load current, 20 A pre-fuse; auxiliary supply 230 V, 1/N/PE, 5 A - Standards: IEC 61439-1 / IEC 60204-1, CE marked - Machine base and housing: stainless steel (AISI 304 equivalent), clean design Equipment - DualFlash neck finish lighting, separate inspection of outer and inner sealing surface - Combined thread inspection via the sidewall mirror assembly - Fallen container detection in front of the machine (photoelectric sensors with infeed pusher) Dedpfxszy Ud Ie Ab Nowb - Base blow-off unit with clocked air nozzle for foam and lubricant residues - Container blower at the infeed, conveyor dead plate (3-fold) - Servo-driven collection module for rejected containers at the discharge - Festo pneumatic system with maintenance unit, food-grade lubricants - Emergency mode: passage operation without inspection - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2012, Overview This Krones Modulfill filling and capping monoblock, manufactured in 2012, is designed for the filling and closing of glass bottles in beverage production lines. The machine is equipped with 60 filling valves and 12 capping heads and is specified for an output of approx. 15,000 bottles per hour. The machine was observed in operation with a current output of approx. 14,990 bottles/hour. It is adjusted for 0.75 l and 0.33 l glass bottles. The capping machine is suitable for plastic screw caps. The system is operated via a Krones iPanel CD and is installed in a stainless steel and glass safety enclosure. Operating data indicate 41,381 operating hours. Technical Data - Manufacturer: Krones AG - Machine Type: Filling and capping monoblock - Model / Identification: Krones Modulfill - Year of Manufacture: 2012 - Application: Filling and closing of glass bottles - Adjusted to Bottle Sizes: 0.75 l (Ø75mm x 265mm) and 0.33 l (Ø65mm x 175mm) - Filling System: Volumetric filling - Filling Valves: 60 - Capping Heads: 12 - Closure Type Observed: Plastic screw cap - Target Output: approx. 15,000 bottles/hour - Operating Hours: 41,381 h - Production Counter: 40,754 h - Control Interface: Krones iPanel CD - Electrical Supply: 400 / 230 V - Current Type: AC 3/N/PE - Frequency: 50 Hz - Full Load Current: 36 A Dwedezcga Uopfx Ab Nsb - Construction: Stainless steel and glass safety enclosure - Condition: Used, observed in operational production environment

Condition: used, Year of construction: 2003, Overview This Krones Blitzpac case packer, manufactured in 2003, is designed for the automatic packing of PET bottles into crates. The machine is configured for handling of 1.0 l PET bottles, packed into 12-bottle crates. The machine has a stated design capacity of approx. 2,700 crates per hour. Product handling is carried out by a mechanical / pneumatic matrix gripper system, which lifts multiple rows of bottles and places them into crates. The machine is fully enclosed with transparent safety guarding. Operation is controlled via an integrated MTS 10 HMI panel, with physical push-buttons and emergency stop. Technical Data Dwjdpfx Aszb Aghob Njb - Manufacturer: Krones AG - Machine Type: Blitzpac case packer / bottle packer - Machine Description: Blitzpac Einpacker 23 Year of Manufacture: 2003 - Application: Packing of PET bottles into crates - Pack Format: 12-bottle crate - Capacity: approx. 2,700 crates/hour - Control / HMI: MTS 10 operator panel - Bottle Handling: Mechanical / 7pcs. pneumatic matrix gripper for multi-row bottle handling - Condition: Used, observed in industrial production environment

Condition: used, Year of construction: 2014, Overview This empty bottle inspector (EBI) was manufactured in 2014 by the German manufacturer Krones. The machine is designed for the inspection of empty glass bottles prior to filling in beverage production lines. It is still in production and will be professionally dismantled in early 2027 as the complete filling line will be replaced. Technical data - Capacity: currently running at 18,500 bph, but can also work at significantly higher speeds. - Formats: - 0.75l bottle - 0,5l bottle - Application: Inspection of empty bottles prior to filling - Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) - Inspection systems:Base inspection (camera) Sealing surface inspection Thread inspection (conical optics) Mouth / finish inspection Sidewall inspection with LED illumination Detection of transparent films on bottle base and sidewall Scuffing detection via sidewall camera Residual liquid detection via infrared system and high-frequency detection Dsdpjzb Afqefx Ab Njwb - Reject systems: - Foreign container rejection at infeed - Contaminated bottle rejection at discharge - Separate rejection for bottles with damaged finish or thread - Direction of operation: Left to right

Condition: used, Year of construction: 2000, Overview This Krones K6W-25-S-E crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built as a stainless steel industrial crate washer and is suitable for integration into automated crate transport and washing systems. The system includes a stainless steel machine housing, integrated conveyor sections, viewing / inspection windows, electrical control cabinet and operator panel with push-buttons, indicator lights and main switch. The machine is CE-marked and designed for 230 / 400 V AC, 50 Hz operation. Technical Data - Manufacturer: Krones / Krones Zierk GmbH - Model / Type: K6W-25-S-E - Machine Type: Crate washing machine - Year of Manufacture: 2000 - Application: Washing / cleaning of beverage crates - Construction: Stainless steel machine housing and frame - Conveyor System: Integrated slat-chain conveyor and crate transport sections - Drive System: Electric drive motor with gearbox - Inspection Access: Viewing window with safety latch hooks - Control System: Integrated electrical control cabinet - Operator Panel: Push-buttons, indicator lights and red rotary main switch - Electrical Supply: 230 / 400 V Current Type: AC Frequency: 50 Hz Nominal Current: 24 A Djdpfx Aezb Ad Tsb Njwb

Condition: used, Year of construction: 2012, Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data - Line type: Returnable glass bottling line - Application: Beverage filling in returnable glass bottles - Formats: 0.33 L and 0.75 L glass bottles - Packaging: Bottles in crates - Filler capacity: 18,000 bottles/hour - Premix capacity: 22,000 L/hour Dwedpfeza Tx Sex Ab Njb - Closure type: Plastic screw caps - Labelling: Wet glue labelling, 2 aggregates - Main machine years: 1996 – 2016 - Dismantling planned: February 2027 Scope of Delivery - Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated - Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 - Crate Decapper | RINK | KM 690/4K | 2012 - Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 - Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 - Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 - Empty Bottle Inspector | Krones | Linatronic | 2014 - Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 - Labelling Machine | Krones | Universella | 2012 - Closure Inspection | Syscona | Expert FHK | 2016 - Inspection System | Krones | Checkmat 731 | 2012 - Crate Packer | Kettner | 1996 - Crate Inspection | Krones | Checkmat 708 | 2011 - Palletizer | Matec | Rotomat 3B | 2002 - Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000

Condition: used, Year of construction: 2018, Overview  This wrap-around case packer (cardboard packaging machine) was manufactured in 2018 by Germany KRONES. The VARIOPAC PRO W-7 is designed for cardboard packaging of PET bottles. The machine is still installed, connected to energy, and currently in production. It will be available from mid of May 2026 and can be visited in production on request. Technical data  - Capacity: 67 cartons/min (x6) - Formats: Dwsdpfx Absy A Nd Do Neb - 1000 ml – 3×2 – single lane - 500 ml – 6×4 – single lane - Application: Cardboard packaging (wrap-around) for PET bottles - Configuration: Wrap-around case packer

Condition: used, Year of construction: 2015, Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: Empty bottle inspector - Year of manufacture: 2015 - Capacity: up to approx. 15,000 bottles per hour and more  - Rejection system: 3 × Ecopush (1 × infeed, 2 × discharge) - Suitable for glass types: brown glass, green glass, flint (white glass) Formats - NRW bottle 0.5 l - 0.33 l swing-top bottle (Steinie, green) - Euro bottle 0.5 l - 0.33 l water bottle (individual) - 1.0 l water bottle (individual) Equipment - 3 × Ecopush rejection system (1 × infeed, 2 × discharge) Dedpfxjy Azq Ne Ab Newb - Base inspection system - Foil detection (base and sidewall) - Sealing surface inspection (4 MP camera) - Thread inspection - Sidewall inspection with 4-camera system (infeed and discharge) - High-frequency caustic detection - Infrared residual liquid detection - Contour detection before infeed

Condition: used, Year of construction: 1999, Overview  Dedeyx I Awepfx Ab Njwb This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  - Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) - Formats: 250 ml – 1000 ml - Application: Hot-fill and cold-fill beverage production - Container types: Glass bottles and PET bottles (hot-fill) - Filling temperature: 10°C – 104°C - CO₂ capability: Yes - Closures: - Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off - PET: 38 mm 3-start hot-fill closure - Labelling: Cold glue paper labels (optional sleeve labelling available) - Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  - Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine - Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system - Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 - Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding - Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones - Bottle dryer | Europool | - | 2007 | High-speed air dryer - Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 - Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt - Conveyors | KHS / Krones | - | - | Complete conveying system - Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial - Pallet labeller | Logopack | - | - | Pallet labelling system - Reverse osmosis system | MWT | - | - | Capacity 800 l/h

Condition: used, Year of construction: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Crate Washer | Hormes | Crate Washer | 1992 Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Dwjdpsytvyfefx Ab Njb Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm

Condition: used, Year of construction: 1998, Overview This Krones - Linapac F-T-1800 automatic bottle packer was manufactured in 1998 and was previously installed in a returnable glass bottling line. The machine is designed for the automatic packing of filled bottles into beverage crates and is typically positioned downstream of the filler and inspection systems. The LINAPAC packer series is widely used in high-capacity beverage production lines due to its robust design and reliable crate handling. The system supports a wide range of bottle formats and crate types commonly used in the beer and beverage industry. The machine was originally operated in a high-performance production environment and is suitable for integration into returnable glass bottling systems with similar capacity ranges. Technical Data Manufacturer: Krones Model: Linapac F-T-1800 Machine type: Automatic bottle packer Year of manufacture: 1998 Application: Automatic insertion of filled bottles into beverage crates Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm Dedjytq Taopfx Ab Nowb - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm Condition: Used Availability: On request

Condition: used, Year of construction: 1998, Overview This Krones Sensometic beer filling system was manufactured in 1998 and was previously installed in a high-capacity beverage bottling line. The machine is designed for the isobaric filling of beer and is equipped with 77 filling valves, enabling high-throughput production. The filler is configured as a filling and capping block and includes two capping units: one for screw caps and one for crown cork closures. Both capping systems are equipped with 12 capping heads, and the closure sorting systems are integrated on the machine. With a designed line capacity of approximately 33,000 bottles per hour, the machine is suitable for large-scale returnable glass bottling operations. The system supports a wide range of bottle formats typically used in the beer industry. Technical Data Manufacturer: Krones Series: Sensometic Model: VPVI 77-103 / KK11 / SV11 Machine type: Isobaric beer filling machine with integrated capping systems Year of manufacture: 1998 Filling valves: 77 Capacity: approx. 33,000 bottles per hour Capping systems: - Screw capper – 11 heads - Crown cork capper – 11 heads Closure handling: - Integrated closure sorting systems on the machine Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm Dodpfxjytqzwe Ab Njwb - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Condition: Used Availability: On request

Condition: used, Year of construction: 1998, Overview This Krones Linapac A-T-1600 automatic bottle unpacker was manufactured in 1998 and was previously installed in a returnable glass beer bottling line. The machine is designed to automatically remove empty bottles from beverage crates and transfer them onto the bottle conveyor system for further processing. The unpacker was operated in a production line with a capacity of approximately 33,000 bottles per hour, making it suitable for high-capacity returnable glass operations. Machines of the LINAPAC series are widely used in the beverage industry due to their robust design and reliable crate handling. The machine is currently out of production but complete, electrical disconnected, and available for inspection. Documentation and CE conformity are available. Technical Data Manufacturer: Krones / Linapac Model: A-T-1600 Machine type: Automatic bottle unpacker Year of manufacture: 1998 Designed line capacity: approx. 33,000 bottles per hour Application: Automatic removal of empty bottles from crates in returnable glass lines Bottle Formats - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm Dodpfxjytpc Ho Ab Nswb - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm Condition: Used, available for inspection Documentation: Available Compliance: CE conformity available Availability: On request

Condition: used, Year of construction: 2009, Overview  This empty bottle inspector (EBI) was manufactured in 2009 by Germany Krones. The machine is designed for the inspection of empty glass and PET bottles prior to filling in beverage production lines. It was previously used in production and has been professionally dismantled and stored in a warehouse. The machine is available immediately from warehouse. Technical data Dwodjythznjpfx Ab Nsb - Capacity: Not provided - Formats: - 0.75 L Gourmet bottle - 0.25 L Gourmet bottle - 0.25 L Vichy bottle - Application: Inspection of empty bottles prior to filling - Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) - Inspection systems: - Base inspection (camera) - Sealing surface inspection - Thread inspection (conical optics) - Mouth / finish inspection - Sidewall inspection with LED illumination - Detection of transparent films on bottle base and sidewall - Scuffing detection via sidewall camera - Residual liquid detection via infrared system and high-frequency detection - Reject systems: - Foreign container rejection at infeed - Contaminated bottle rejection at discharge - Separate rejection for bottles with damaged finish or thread - Utilities: Pneumatic system (Festo / Bosch components), electronic cabinet cooling unit - Transport height: approx. 1,050 mm - Direction of operation: Left machine

Condition: used, Year of construction: 2001, Overview This Krones rinser-filler-capper block was manufactured in 2001 and consists of a Volumetic filling system combined with a Variojet rinser and a screw-capping machine. The machine is designed for PET multiway bottles (GDB PET-MW) in 1.0 L and 0.5 L formats. The system is equipped with 120 filling valves and 88 rinsing stations. The rinser operates with 2 rinsing channels, currently configured for ClO₂ and fresh water. The machine runs clockwise and achieves a production capacity of up to 32,000 bottles per hour at 1.0 L. The machine will be available from October 2026 and will be exchanged parallel to the installation of the new line.  Technical Data - manufacturer: Krones - model: Volumetic (filler) / Variojet (rinser) - year of manufacture: 2001 - filling valves: 120 - rinsing stations: 88 - rinsing channels: 2 (currently ClO₂ and fresh water) - formats: Dwedsyluwtjpfx Ab Njb - 1.0 L GDB PET-MW - 0.5 L GDB PET-MW - POC 1810 closures - production capacity: 32,000 bph at 1.0 L - direction of rotation: clockwise - availability: beginning of October 2026

Condition: used, Year of construction: 2004, Overview This stretch blow moulding machine was manufactured in 2004 by German company KRONES. The machine is a CONTIFORM S8, designed for PET bottle production and configured for PCO 1881 and Alaska neck finishes. The blow moulder is immediately available. Technical data  - Capacity: - Max. 13,600 bph - Formats: - 0.50 L - 1.00 L - 1.50 L Dwedpfx Aboylacuj Neb - Neck finish: - PCO 1881 - Alaska - Number of cavities: - 8 moulds - Operating hours: - Approx. 35,000 h Scope of Delivery  - KRONES CONTIFORM S8 stretch blow moulding machine - Preform hopper and feeder - Chiller - 6 sets of moulds - Spare parts

Condition: used, Year of construction: 2014, Overview  Dwedpfxeyb Sk Ns Ab Njb This fill level and closure inspection unit was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement as well as closure control for metal caps via sensor technology integrated into the filler. The system was recently dismantled in full working condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger light barriers, encoder, and pusher were properly disconnected and are included in the delivery. Technical data - Inspection functions: - Overfill and underfill detection using HF (high-frequency) method - Closure control via integrated sensor for metal caps (mounted in filler) - Condition: Excellent, fully functional before dismantling - Status: Dismantled and stored, ready for shipment - Application: Bottling lines for beverages with metal closures - Included components: Trigger sensors, encoder, and pusher

Condition: used, Year of construction: 2012, Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications - Output: 7,800 bph - Producs: Beer and CSD - Formats: - NRW 0.5 l - 0.33 l ring neck - 0.25 l LN Machine List  - Machine type: Decrater - Manufacturer: BMS - Year of manufacture: 2012 - Machine type: Decapper (Screw Cap) - Manufacturer: Rink - Decapping in the crate Euro 0,5l in 4x5 crate - Year of manufacture: 2012 - Machine type: Bottle washer - Manufacturer: Gera - Year of manufacture: 2024 - Machine type: Empty bottle inspector - Manufacturer: Krones - Model: Smarttronic - Incl. Pusher - Year of manufacture: 2012 - Machine type: Filler - Manufacturer: Kosme - Model: Isofill G 28/960 - 28 Valves - Year of manufacture: 2012 Dodpfxoyb Sbuj Ab Njwb - With Combi Capper 4 heads(Crown Cork and Screw Cap) - Capacity: - 7,800 bph - Machine type: Labeling machine - Manufacturer: Krones - Model: Robusta - Refurbished in 2012 - 10 Bottle plates - 2 Label stations with 4 grippers and 4 glue pallets - Inkjet printer - Machine type: Crater - Manufacturer: BMS - Year of manufacture: 2012 - Crate format: Modul Crate 4x5

Condition: used, Year of construction: 2004, Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data - Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  - Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 - Bottle Formats: 0,5L and 1,5L PET CSD - Cap Formats: PCO 1810 - Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label - Packaging formats: shrink wrapping with/without carry handle (3x2) - Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  - Application: CSD - Hygienic design - condition: good technical condition, dismantled - blow molding, filling and capping machine as a block system   Scope of Delivery Blow Molding Machine | KRONES | Contiform S08 | 2004 Compressor | Kaeser | only Booster grade | 2004 Filling/Capping | Krones| Mecafill VKP-PET 2880-80-113 | 10 capping heads | 2004 Mixer | KRONES MSF 24/2 | vacuum-assisted deaeration | Brixmeter | CO2-meter Dwodpfx Absyb Sa Dj Njb Velcorin | Burdomat II G | 2004 Bottle inspection | KRONES | Checkmat FM-G Fill height (underfill) and cap control Labelling machine | Krones| Unimodul 600-15 | 2004 Bottle inspection | KRONES | Checkmat E | Label Check existence | 2004 Date stamping | Excel 170i UHS | 2004 Shrink Packer | KRONES | Variopac FS-30 | 2004 Handle Application | Comag | H 40/2 | 2004 Palletizer | KRONES | Robot 3A Palletsafety | Lachenmeier Multi Flex 1

Condition: used, Year of construction: 2002, Overview Dedpfjxhf Hisx Ab Newb This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  - Line capacity: - 12,000 bph at 0.5 L - 9,000 bph at 1.0 L - 8,000 bph at 1.5 L - 6,000 bph at 2.0 L - Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L - Neck finish: PCO 1810 - Max. bottle diameter: 106 mm - Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water - Labelling: Wrap-around, pre-cut paper labels, hot-melt - Secondary packaging: Film only (4×3 and 3×2) - PLC: Siemens S7-300 - Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery - Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit - Rinser | Krones | Variojet | 2002 | Rotary - Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer - Labeller | Krones | SV 360-10-113 | 2002 | Rotary - Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt - Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats - Palletizer | Krones | Pressant Compact 1N | 2002 - Stretch wrapper | Robopac | Rotoplat | 2002 - Air conveyor | Krones | Airco S | 2002 | For blown PET bottles - Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles - Pack conveyor | Krones | Multico S | 2002 | For product packs - Pallet conveyor | Krones | — | 2002 | For pallet transport - Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold

Condition: used, Year of construction: 1986, Overview  This isobaric glass bottle filler was manufactured in 1986–87 by German company Krones and commissioned in 1988. It is a Krones Mecafill VK2V K126-308 with 96 filling valves and 18 capper heads for crown cork closures. The filler has been continuously upgraded with new technology, including a Siemens S7-300 control system (2009) and a retrofitted Krones capper (2004). It is suitable for beer, cider, soft drinks, cocktails, lemonade, carbonated and still water. The machine is still in production (can be seen on the video) and will be dismantled by the end of September 2025. Spare parts from the warehouse are included. Technical data  - Capacity: 30,000 bph (all formats) - Formats: 0.275 L, 0.33 L, 0.5 L (total 9 formats) - Filling valves: 96 - Capping heads: 18 Dwsdpfxoxc H Tge Ab Nsb - Closure type: Crown cork - Direction: Clockwise (L–R) - Diameter: 2,880 mm - Filling system: Isobaric, with double evacuation, HDE (hot water injection), and splinter washout - Products: Beer, alcohol-free beer, cider, cocktails, lemonade, soft drinks, carbonated water, still water - Control system: Siemens S7-300 PLC (2009 retrofit) Scope of Delivery  - Filler and capper | Krones | Mecafill VK2V K126-308 | 1986–87 (commissioned 1988) | 96 filling valves, 18 capper heads, crown cork closures, clockwise, diameter 2,880 mm, crown cork transport system - Control system | Siemens | S7-300 | 2009 | PLC retrofit - Safety fences - Spare parts