Used Knives for sale (1,321)

Year of construction: 2026, condition: new, This 4-side -pointer was designed mainly for small and medium quantities with manual feeding. The machine has the following performance. As a drive type for the hydraulic pump, the machine is optionally supplied with a 7.5 kW electric motor or with connection for a cardan shaft. Sometimes it can be very simple: the mechanical sharpening machine has been specially designed for fast and practical feeding under manual feeding. It is therefore perfect for producing small and medium quantities of fence elements, wooden posts and palisades. Ideal for flexible landscaping or hastily planned timber construction. It can process any type of milled and peeled wood. Even curved weak wood, or logs with bark are no problem for the sharp knives. Maximum log diameter 270 mm Shortest lenght of log 1,15 m 5 pointing angles adjustable For rounded, peeled and unmachined logs Capacity 150 to 250 poles/houre Cylinder force 2 x 10 to Oilpressure 200 bar Power unit Electro motor 7,5 kW Ihedpfxjfw A D No Ag Uet PTO drive Tractor pump

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Inlet width: 540 mm - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft - Lower shaft motor: 4 kW - Top driven serrated shaft - Upper shaft motor: 4 kW - Belt feeder - Feeder belt length: 4720 mm - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR (Prices may vary in case of significant fluctuations) Iodpfx Agjx Tg Hds Ujht

Condition: excellent (used), Year of construction: 2020, operating hours: 171 h, functionality: fully functional, machine/vehicle number: 18403, total length: 1,900 mm, total width: 1,650 mm, total height: 2,155 mm, overall weight: 1,500 kg, input voltage: 380 V, type of input current: three-phase, power: 7.5 kW (10.20 HP), Equipment: CE marking, BDR 75/600 Shredder comprising: - 800-litre hot-dip galvanized hopper - 7.5 kW gear motor - 600 mm painted cutting unit Ihjdpfx Agex Hq Ace Ujt - Cutting block with reinforced sealing partitions for significant quantities of liquids and grease - 12 mm Hardox knives with 7 special tips o With specific shaft speeds (14 and 28 rpm) - Control panel in 304 L stainless steel (with control for pre-configured feed belt/screw) - Galvanized and secured frame for pallet box 171 operating hours.

Condition: excellent (used), Year of construction: 1995, - machine in stock - after a technical review - very good condition - year of production 1995   TECHNICAL PARAMETERS: - turning length max 1300 mm Iedpfed Rkkzsx Ag Ujht - turning diameter 120 mm - three lower knives - five top knives - steady - hydraulic knife control - automatic control - magazine   Machine dimensions: - length 380 cm - width 210 cm - height 215 cm - weight ~ 3490 kg

Condition: new, Year of construction: 2025, Description: Suitable for automatic grinding of plane blades, chisel blades, veneer knives, paper knives, and machine knives. Accessories: Paper band filter with Magbeta separator, capacity 300 liters 1 flange and 1 grinding disc 200 mm Ø ceramic. 1 flange for CBN / DIA grinding discs, 200 mm Ø Grinding length: 3100 mm Magnet width: 155 mm swivel range: 360° Grinding width: 275 mm grinding motor: 11.5 kW n = 1500 Grinding height: about 120 mm Grinding spindle speed infinitely variable: 1500 u/min Grinding conveyer speed continuously adjustable: 3 - 25 m/min Infeed: stepwise 0.005 – 0.2 mm Iodpfx Ajx E Skreg Uoht slip ring diameter: 200 mm Connected load approx.: approx. 15 kW (400 V / 50 Hz) Dimensions W x D x H =: 5200 x 1500 x 1900 mm Weight approx.: 2600 kg colour: Blue / Gray

Condition: used, Year of construction: 2022, Used Machine Year of Manufacture: 2022 Features and Technical Data: - Ideally suited for demanding craftsmen and joiners/cabinetmakers - Extra-long, one-piece surfacing tables ensure easy and precise jointing of workpieces - Working tables are made from cast iron, making them highly durable and permanently flat; simultaneously opening surfacing tables with spring-loaded supports enable quick and convenient changeover - Fixed-mounted extraction hood means no need to disconnect the extraction hose during changeovers, saving valuable working time - Helically-geared steel infeed roller for consistent and even timber feed - Rubber outfeed roller at the thicknesser exit ensures uniform wood discharge - Four feed speeds for material transport - Thicknessing table adjustment by handwheel with integrated height display - DIGITAL version: with electric thicknessing table height adjustment and digital readout - Start/Stop switch located at operator position - Powerful industrial motor - High machine weight guarantees maximum precision and smooth operation - Prepped for long-hole drilling attachment - Quality Made in Italy - Equipped with spiral cutterhead - Fitted with foldable cutterhead guard - Total table length: 2,250 mm - Maximum cutting depth: 5 mm - Working width: 520 mm - Thicknessing height range: 3 – 240 mm - Number of knives: 66 pcs - Cutterhead speed: 5,000 rpm - Motor: 9 kW - Feed speed: 5/8/12/18 m/min - Extraction port: 120 mm Ihsdpfx Aox Hbrnsg Uet Weight: 695 kg Dimensions: 2,250 x 1,440 mm Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Condition: new, Year of construction: 2026, functionality: fully functional, VKM - Peeling Machine PS2000 Wood diameter: 40 – 200 mm Peeling disc diameter: 458 mm Number of peeling knives: 8 Feed speed: 5 – 15 m/min Air consumption approx. 60 NL/min Peeling disc speed: 1500 rpm Peeling disc drive power: 15 kW Lower feed wheel drive power: 0.37 kW Iodev Uxm Topfx Ag Ujht Upper feed wheel drive power: 0.37 kW Electrically adjustable raw wood diameter setting via foot switch, also possible during operation.

Condition: excellent (used), CATALOG NUMBER 7726 TECHNICAL DATA - Feed hopper inlet – hydraulic lift 1200x1000mm - Discharge outlet for shredded wood diameter 200mm - rotor working width 980mm - Main motor 37kW Ihodpfx Agox Tg E Ho Uet - Number of knives 52 pcs - Knife size 40x40mm - Screen 20/25mm - Pressing drawer (hydraulic pusher) - Electric auto-reverse - Dimensions (L/W/H) 2520x2000x1740mm - Weight approx. 2500kg ADVANTAGES – German made – Screw conveyor (for wood chips) – Pressing drawer, serrated – Knives as new – New counter-knife – Very good condition – Used chipper Net price: 106,900 PLN Net price: 25,450 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overworked machine 37 kW Feed opening: 1200 x 1200 mm Rotor length: 1300 mm Rotor diameter: 348 mm Rotor for soft Wood Screen size: 20/25mm Tools: 60 knives: 35x35mm caro and 35x35mm concav Isdpfx Aetxykfeg Ujht Controlled by PLC Hydraulic tank size: 20 l fast hydraulic backwards Conveyor belt sector 400mm Second row of knives

Condition: used, Year of construction: 2005, Three knife trimmer Müller Martini Esprit (1576) Year: 2005 For three side trimming of book blocks and brochures, operable in connection with book production lines. Description: - Colour monitor with touchscreen - Automatic setting - Infeed conveyor from the left - Left hand infeed - Exchangeable cutting tables, number: 3 - 11 - Sets of knives: 2 Technical specifications: - mechanical speed: up to 2.000 cycles/h - size range untrimmed max.: 391 x 320 mm - size range untrimmed min.: 148 x 95 mm - size range trimmed max.: 311 x 305 mm - size range trimmed min.: 142 x 75 mm - book thickness: 2 - 80 mm Iedpfx Agsvxfkge Uoht

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: GSE 30602103001, ZERMA shredder Type: GSE 300/600 + DUST CYCLONE Includes spare parts, knives, counter-knives. Iedpfx Agjvdkw No Uoht Like new, only used for a few hours

Condition: reconditioned (used), Year of construction: 2006, operating hours: 11,000 h, functionality: fully functional, rotor diameter: 640 mm, number of blades: 6, rotor width: 2,500 mm, power: 247 kW (335.83 HP), Vecoplan VAZ 2500 M NF-T Compact high torque motor with motor pump unit and electric motor Generous bolted hopper about 16 m3 capacity with horizontal hydraulic ram + vertical hydraulic ram (excellent for light voluminous or round shaped scraps) hydraulic power station with 1x15 kw + 1x7,5 kw motors 250 lt hydraulic oil tank Max. operating pressure up to 150 bar Hi Torque drive with silent running Rotor Ø 640 Isdpex Tftpjfx Ag Ueht Rotor width 2.500 mm. rotor rpm 0-220 n.76 cutting crowns 60x60 x30 mm n.6 still knives 5-pieces screen size : 20 mm - different size on request electro-pneumatic pistons for screen opening Motor power 203 kw 247 kw Hi Torque - on Buyer's choice 315 kw inverter 415 A nominal 0-220 rpm 400 V 50 Hz - IP 54 temperature probes on the 2 bearings constructed in 2006 but seldom used for wooden pallets, once in a while (11.000 worked hours). The machine is fitted with Atex cables, sensors, 2 Atex motors in the hydraulic pack . Electric cabinet Siemens S7 300 operator panel for machine management. The supply includes2 sturdy supporting structures to increase the machine height by 700 mm. This machine is offered completely reconditioned, brought to next-to-new conditions with a deep and professional reconditioning to give 99%performances at a fraction of the price for a new machine. Can be completed with a cased double extraction screw conveyor 2 x 300 mm Ø - 5,0 mt.long, 4 kw gearmotor See the benefits of a Hi Torque motor on the Constructor's pdf brochure - att. This machine can be dry-tested before loading

Condition: used, Year of construction: 1991, total length: 6,450 mm, total height: 2,200 mm, total width: 2,200 mm, Komplett mit Förderband und Magnet - Year: 1991 - Documentation available: No - CE certificate present: No Isdpjww T U Njfx Ag Uoht - Main motor power [kW]: 45 - Rotation speed [rpm]: 982 - Hydraulic unit power [kW]: 7.5 - Oil tank capacity [L]: 110 - Rotor width [mm]: 1000 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 2300 - Opening width [mm]: 2500 - Opening length [mm]: 3200 - Sieve perforation [mm]: 200 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 6450mm x 2200mm x 2200mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, EM electronic digital display two hand safety cutting back table guarding optical cutting line indication air table slot cover at back table side tables (2) -cast iron Iedpfsxk Tpdex Ag Usht 2 knives, documentation, el. diagrams, tooling Installation Dims W180 x D175 cm / 1.050kg Pack-Dims W200 x D200 x H160 cm / 1250kg

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Ihedpfx Aed E R D Sjg Ust Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 600 Year: 2011 Consisting of Gathering machine Kolbus ZU 804 Description: - Hand feeding station - Number of gathering stations: 20 - Optical sheet control: Sygna-Lynx - Air center: Becker - Set up element - Reject gate for incomplete products Perfect binder Kolbus KM 600 Product counter: approx. 12.800.000 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375 - Base for side glue system - Hotmelt side glue unit, interchangeable - Cover feeder: RA 49.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus - Transport system, length (approx): 20 mtr Iodpfx Agsx Ahl Do Usht - Escape delivery Three knife trimmer Kolbus HD 143.P Year: 2011 Product counter: approx. 12.570.000 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production - Cut counter - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) In the photos, you can also see a side stitching unit. This type of side stitching is mainly required for the production of school books in the Middle East. This unit is not included in the offered price but is available at an additional cost on request.

Condition: used, total length: 3,100 mm, total height: 1,550 mm, total width: 1,850 mm, Empty weight: 5.000 kg - Documentation available: No - CE certificate present: No - Main motor power [kW]: 30 - Rotation speed [rpm]: 1470 - Hydraulic unit power [kW]: 3.4 - Oil tank capacity [L]: 75 - Rotor width [mm]: 1150 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 1000 - Opening width [mm]: 2580 - Opening length [mm]: 2180 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 63 +/- Ihsdpfewf U Aqsx Ag Ujt - Transport dimensions: 3100mm x 1850mm x 1550mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 6711406, cutting width (max.): 920 mm, machine fully refurbished - Polar maintenance program E-Electronic computer cutting programmes Fully graphics-able colour display 210x160mm Infra-Red light guards two hand safety cutting back table guarding all relevant safety installations optical cutting line indication air table cutting table - stainless steel slot cover at back table Ihodpfx Agov Idbij Uet side tables (2) -cast iron adjustable hydraulic pressing 2 knives, documentation, el. diagrams, tooling Gross weight 1900kg

Condition: used, Year of construction: 1991, total length: 1,660 mm, total height: 1,470 mm, total width: 1,100 mm, Empty weight: 1.300 kg - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 500-1014 - Main motor power [kW]: 18.5 - Rotor width [mm]: 600 - Opening width [mm]: 600 - Opening length [mm]: 800 - Sieve perforation [mm]: 15 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 1660mm x 1100mm x 1470mm (l x w x h) - Transport weight [kg]: 1300kg Ihsdpfxswu Uy Is Ag Ujt - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total width: 2,900 mm, total height: 1,100 mm, total length: 1,300 mm, Weight: 650 kg - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AF 1.04488 - Main motor power [kW]: 4 - Max. planing width [mm]: 430 - Infeed table length [mm]: 1550 - Outfeed table length [mm]: 1250 - Total table length [mm]: 2900 - Planing spindle speed [rpm]: 5000 - Cutter block diameter [mm]: 120 - Number of knives [pcs]: 4 - Diameter extraction nozzle [mm]: 130 - Voltage [V]: 400 - Current consumption [A]: 9.5 - Power [kW]: 4.0 Isdpfx Agswnidzj Uoht - Transport dimensions: 1300mm x 2900mm x 1100mm (l x w x h) - Transport weight [kg]: 650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Price: On request Granulator Dreher S26/26 VS Machine No. K 8329 Built in 1982 Ihjdpfx Agowh Naio Uot Engine 5.5kW Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Interchangeable strainer Sieve holes 6mm - Documentation available: No - CE certificate present: No - Main motor power [kW]: 5.5 - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, total width: 1,050 mm, total height: 1,400 mm, total length: 3,070 mm, Price: On request Ihsdpfjwnhqyjx Ag Uot - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: 131-021899 - Main motor power [kW]: 5.5 - Max. planing width [mm]: 410 - Infeed table length [mm]: 1500 - Outfeed table length [mm]: 150 - Total table length [mm]: 3070 - Number of knives [pcs]: 4 - Transport dimensions: 3070mm x 1050mm x 1400mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2003, operating hours: 10,120 h, total length: 1,800 mm, total height: 1,700 mm, total width: 1,200 mm, Empty weight: 1.300 kg Price: On request Shredder Ihsdpjwh Na Nsfx Ag Uot Untha LR 630 Year of construction 2003 Input opening: 624 x 792 mm Throughput speed: material and sieve dependent Rotor diameter: 248 mm Rotor speed: 86 - 96 rpm Engine power: 15 kW Cutting system: 17 knives Sieve diameter 24mm Transport dimensions 1800*1200*1700mm (L*W*H), Weight 1300kg - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: LR632318 - Operating hours: 10120 - Transport dimensions: 1800mm x 1200mm x 1700mm (l x w x h) - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Empty weight: 1.500 kg Dimensions (LxBxH): 150 x 140 x 150 cm Double-sided planer MIC AM2 Max working width 510mm Roll up and down 2 knives per planer head Ihodpownhhxsfx Ag Ujt - Documentation available: No - CE certificate present: No - Serial number: 1652.75 - Transport dimensions: 1500mm x 1400mm x 1500mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, Thicknesser Robland D510 Serial no. Year of construction 2008 Table dimensions 510x850mm Max. working width 510mm Min-max working height 250mm Max planing depth 8mm 4 knives Tersa 4 throughput speeds 5/8/10/16 m/min Electrical high/low 380V, 5.5kW, 6000 Rpm Dimensions: 1200*880*1100mm, weight 480kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Max. planing width [mm]: 530 - Max. planing height [mm]: 300 - Max. planing depth [mm]: 530 - Planing shaft speed [rpm]: 5000 - Worktable length [mm]: 880 - Planer block diameter [mm]: 110 - Cutter type: Tersa - Number of cutters [pcs.]: 4 - Extraction nozzle diameter [mm]: 150 - Max. feed speed [m/min]: 19.5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ihedpjwnh Tbsfx Ag Ujt Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels