Warp knitting machine

Karl Mayer PSZ-28-2200-Prosize Sizing Machine

Condition: excellent (used), Year of construction: 2014, Counter: 71 Mil. clicks Equipment / additional information: HP IndiChrome Plus 7-color on-press printing White ink kit Enables use of white ink Technical specifications Printing speed 120 four-colour a4 images per minute (two-up); 240 two-colour or monochrome a4 images per minute (two-up) Dodpfx Ajzavhcja Howb Image resolution 812 and 1219 dpi at 8 bit, addressability: 2438 x 2438 dpi HdI (High definition Imaging) Paper format 330 x 482 mm maximum Image format 317 x 464 mm Paper weight* Coated: 80-350 gsm; Uncoated: 60-320 gsm; thickness 70-400 microns Press dimensions Width: 5443 mm; depth: 2298 mm; Height: 2104 mm

Condition: ready for operation (used), Year of construction: 1988, Two similar Karl Mayer warp knitting machines are available. 1) Karl Mayer KS 3, year of manufacture: 1988, working width: 130 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66H-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-VP19, speed: 1500, yarn monitoring: Laser 4080, fabric monitoring: Scanner 5090. 2) Karl Mayer KS 3, year of manufacture: 1986, working width: 84 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66/3-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-V-3-19, speed: 1300, yarn monitoring: Laser 4080. An on-site inspection is possible. Dedpfx Asyz An Toa Hewb

Condition: ready for operation (used), Year of construction: 1997, A Raschel warp knitting machine Karl Mayer is available. Working width: 130inch, gauge: E32, yarn feed: EBA-1, guide bar element: C-32-28/P2, guide needle element: Spec-38-45 G105, latch needle element: L-32-93H-0, knock-over comb element: S-32-93H-0, speed: 1800-2000, yarn monitoring: Laser 4080. Including computer. Documentation available. An on-site inspection is possible. Dwodpfx Aajyz Apde Heb

Condition: ready for operation (used), Year of construction: 2022, Two nearly new and identical Karl Mayer warp knitting machines are available. Gauge: E32, working width: 130 inch (approx. 3300mm), guide bars: 4, ground guide bars: 4, max. machine speed: 2760rpm. The machines are located in the USA, however, export and transport to Europe without customs clearance are included. Documentation available. An on-site inspection is possible. Dedpfxszc Rdqo Aa Hewb

Year of construction: 2004, condition: used, Year: 2004 Condition: good Counter. 91 Mil Impression but reality is approx. 200 Mil Dedpjy Ixnpsfx Aa Howb Machine on stock Technical specification: - Maximum sheet size: 720 × 1,030 mm - Minimum sheet size: 360 × 520 mm - Paper thickness: 0.07 – 0.30 mm - Maximum printing area: 705 × 1,020 mm - Maximum printing speed: 13,000 sheets per hour - Minimum printing speed: 3,500 sheets per hour Printing plate: - Length × Width: 800 × 1,030 mm - Thickness: 0.30 mm Blanket: - Length × Width: 900 × 1,040 mm Inking unit: - Number of form rollers: 4 - Form roller diameters: 87.5 – 77.5 – 85 – 90 mm - Number of rollers: 21 (lower unit) / 20 (upper unit) Pile height: - Feeder: 1,430 mm - Delivery: 1,430 mm Dimensions and weight: - Length × Width × Height: 11,022 × 4,037 × 3,383 mm - Weight (standard configuration): 64,220 kg (machine only) Electrical specification: - Power consumption: 117.94 kW (machine only) - Frequency: 50 Hz Specification: - Remote diagonal register adjustment (cocking). - Semi-automatic plate changing in the upper printing unit. - Semi-automatic plate changing in the lower printing unit. - AMR job presetting system: presetting of paper size and thickness, presetting of feeder table brushes / feed roller, presetting of feeder side air blowers, presetting of the side lay, and sheet drum brake position. - Automatic ink roller washing system. - Automatic blanket washing system. - Automatic impression cylinder washing system. - Lateral feeder pile adjustment (via shifting feeder). - Remote sucker height adjustment. - Water-cooled distributor rollers. - Oscillating ink form rollers: 2 × B and 2 × D for the upper and lower printing units separately. - Chrome-plated plate cylinder. - Chrome-plated impression cylinder (with special surface coating). - Chrome-plated blanket cylinder. - Combined Technotrans Beta.C 300L system for dampening solution cooling and ink temperature control (including CombiControl 4.3, Aquados C5, and integrated tank). - Grafix powder spray unit with Grafix powder spraying system.

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Dedpfx Aaozhntrj Hewb

Condition: used, Year of construction: 2002, DRAW-SIZE-WARPING LINE FOR FILAMENT YARNS Dwodpjy Spl Hofx Aa Hsb TO PROCESS POY (FROM BOBBINS) INTO FULLY DRAWN SIZED WARP BEAMS : MAKE : SUCKER-MUELLER - HACOBA TYPE : NZB-Z WW : 180 cm YOC : 2002 ( USED ONLY 4 YEARS!, then stored ) SPEED : 500 M/ MIN EQUIPPED WITH : - WAXING ROLL - 2 HOT AIR DRYING CHAMBERS (1995) 150˚C - 9 STEAM DRYING CYLINDERS 180cm ( 1995) 130 ˚C - YARN TENSION CONTROL SYSTEM BY ‘TENSOSCAN’ - YARN DRYING CONTROL SYSTEM BY ‘PLEVA’ - YARN BREAKAGE INSPECTOR BY ‘CAMSCAN’ CREEL WITH BOBBIN CARRIAGE MAKE : ROSTONI TYPE : RCS/GB/1344 YOC : 1995 NO. OF BOBBINS : 1344 EQUIPPED WITH : - MOVABLE TENSIONER FRAME - EYE GUIDE BOARD - TENSION VARIATION SIZING KITCHEN MAKE : MARIOTTI & PECINI YOC : 2002 CAPACITY : 700 LITERS INOX TUB + INOX STOCK TUB 700 LITERS WITH ASSEMBY BEAMER 300CM MAKE : SUCKER-MUELLER TYPE : WN YOC : 1985 BEAMNING SPEED : 150 M/MIN WW : 300 CM BEAM DIA : MAX 1000 MM BEAM WIDTH : 3000 MM ( ROLL WIDTH 3200MM) - LEAVELING DEVICE SYSTEM ( FOR 8 SECTION BEAMS) - WITH TENSION CONTROL SYSTEM FOR WARPBEAMS - WITH 2 x DOUBLE DECK BEAM STAND FOR 10 BEAMS & 6 BEAMS BY SUCKER MULLER ( 1987) TYPE AB50

Year of construction: 2005, condition: ready for operation (used), A Klieverik roll-to-roll sublimation and transfer printing calendar is available. Media width: 3200mm, max. working width: 3200mm, heating cylinder diameter: 195mm, max. temperature: 220°C, process speed: 1.25m/min, production capacity: approx. 135m²/h. Machine dimensions X/Y/Z: approx. 4150mm/1200mm/1550mm, weight: approx. 1900kg. Documentation available. An on-site inspection is possible. Dwedpfxey Nnaqo Aa Heb

Year of construction: 1999, condition: ready for operation (used), A direct warping machine Karl Mayer is available. Working width: 42inch, yarn feeding: NC. Including memory, roller unit and all reeds. Without creel. An inspection on site is possible. Djdpsyz Apkefx Aa Hswb

Condition: used, Year of construction: 2020, functionality: fully functional, AL-2400 mm SS PP Spun-Bond Machine Line ( Filament 1.5D-1.8D ） -Raw Material： Polypropylene granule，master batches，additive -Production Process: With high temperature filament drawn, certain proportion of polypropylene, master batches and additive are drawn into net by negative pressure, which are boned together being into fabric by calender. -Annual Output: 4800 Tons/Year（30gsm） -Fabric GSM: 9-60 g/m2 -Installed power: Around 1500KW Dedpfx Aezlg Iioa Hswb