Used Knife Folder for sale (2,215)

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Hjdpegq N Ezofx Ag Ujng Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Condition: good (used), Knife disinfection machine, knife disinfection device -Body: made of stainless steel Disinfectant: stored in the device -Max. cutting dimensions: 80 x 10 mm -Dimensions: 450/310/H900 mm -Weight: 30 kg Hnodpjb A N Evjfx Ag Ujg

Condition: used, Year of construction: 2004, Three knife trimmer Kolbus HD 142.P Year 2004 Description: Hedpfswnbv Ajx Ag Uong - Co-Pilot with touchscreen - Semi automatic setting - Right hand infeed - Counter stacker - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Kolbus: HD 142.P Maximum size (cutted): 305 x 420 x 80 mm (WxHxT) Minimum size (cutted): 100 x 100 x 2 mm (WxHxT) Maximum size (uncutted): 310 x 430 x 80 mm (WxHxT) Maximum pile height: 80 mm Max. mechanical speed: 3.900 cuts/h Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: new, Year of construction: 2026, The CIDAN MFB is an easy-to-use manual folding machine with a compact size and low weight. This allows you to take this practical assistant anywhere and quickly and effortlessly bend sheet metal directly in your work vehicle or on the construction site. This machine meets the same high standards as our quality machines, which we have been manufacturing for our customers in this industry for over a hundred years. It is a robust machine, built for longevity. Supported by our customer service, it represents an excellent folding solution now and for the future. To meet today’s demanding and fast-paced working environment, it is sometimes essential that tasks can be performed on-site, by anyone, and without lengthy training. With this manual folding machine, you can reduce lead times and also minimize the risks that may occur during the process from production to the customer. Make: CIDAN Model: MFB 1270 Capacity: 1.5 mm at 400 N/mm² Working width: 1270 mm Weight: 390 kg Features: - Segmented upper and lower tooling - Manual back gauge - Tool box or The new CIDAN MF is an easy-to-use manual folding machine, compact in size and lightweight. This makes it possible to take this practical device anywhere and bend sheet metal quickly and simply, whether in your work vehicle or directly at the construction site. This machine maintains the same high standards as our quality equipment, which we have been building for customers for over a century. The manual folding machine is extremely robust and designed for long-term operation. Thanks to its intuitive controls, the machine is immediately ready to use and delivers precise results. It enables efficient work, regardless of location or operator experience. This ensures you can work effectively and reliably without wasting time on extensive training or adjustments. Make: CIDAN Working length: 2040 mm Steel* (400 N/mm²): 0.6 mm Stainless steel* (600 N/mm²): 0.5 mm Aluminum* (200 N/mm²): 1.0 mm Hnjdpfx Agjma H Hmj Ueg Weight: 140 kg

Condition: good (used), Year of construction: 2004, Folding Carton Gluing Machine Formats: max. 1000 x 600 mm min. 126 x 60 mm - Straight-line version for longitudinal seam (straight-line) cartons, crash-lock bottom cartons, and 4-corner cartons - Feeder with vibration - Pre-breaking units Hnsdpex R Thijfx Ag Usg - Left-side lower disc gluing system - Folding modules - Crash-lock (patent bottom) module - Electronic upper gluing system KAS C-800-Compact - 4 glue nozzles - Up to 5 gluing points - Unit with 2 forming stations - Pneumatically operated press belt and delivery section - CUBE central control system with display

Condition: used, Stainless steel knife gate valve Hedpsx Nykbjfx Ag Ueng Diameter 150 mm Made entirely of stainless steel 2 units in stock See our other listings VMA Wekerom

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, consists of: 1. Dryer CEFLA FEV E: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 110 kW 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU 4. Roller conveyor CEFLA TR 3000 Heating medium: Electric Installed electrical power for both dryers: approx. 210 kW 1. Dryer CEFLA FEV E: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. The dryer is configured with a laminar flow of hot air in the opposite direction to the workpiece feed and features adjustable recirculation. Total length: 7,500 mm Working width: 1,300 mm Total width: 1,783 mm Max. drying height: 1,780 mm (excluding conveyor) Useful pass-through height: 80 mm Solvent-laden air exhausted to outside: 0–4,000 m³/h Machine control via 5.7" LCD touchscreen panel VS spark-proof supply/recirculation fan: Output: 2.2 kW; Capacity: 40,000 m³/h; Supply air to the room: 0–4,000 m³/h; Installed heating capacity: 76,400 kcal/h (heating system 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. The dryer is configured with a laminar flow of hot air in the opposite direction to the workpiece feed and features adjustable recirculation. Total length: 7,500 mm Working width: 1,300 mm Total width: 1,783 mm Max. drying height: 1,780 mm (excluding conveyor) Useful pass-through height: 80 mm Installed electrical power: 115 kW Solvent-laden air exhausted to outside: 0–4,000 m³/h Machine control via 5.7" LCD touchscreen panel VS spark-proof supply/recirculation fan: Output: 2.2 kW; Capacity: 40,000 m³/h; Electrical output discharge: 1.5 kW; Supply air to the room: 0–4,000 m³/h; Installed heating capacity: 76,400 kcal/h PR frost protection for 1 heating register, with probe and automatic damper control 3. Cooling Zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives for highly efficient heat exchange due to the high air velocity. The ventilation unit consists of: - Supply and recirculation fan: 3 kW; Capacity: 6,000 m³/h - Exhaust fan: 1.5 kW; Capacity: 6,000 m³/h Digital ventilation adjustment via touchscreen. The air knives are installed across the entire tunnel surface. Air knife outlet velocity max. 32.5 m/sec Total length: 3,000 mm Useful width: 1,300 mm Total width: 1,783 mm Useful pass-through height: 80 mm Max. tunnel height: 1,780 mm (excluding conveyor) Hedpfxow H Aw Ss Ag Uong Installed electrical power: 4.5 kW Machine control via 5.7" LCD touchscreen TT 4000 bar conveyor with double chain, steel guides, and chrome-plated bars: 4. Roller Conveyor CEFLA TR 3000 Motorised rollers with PVC covering Length: 3,000 mm Photoelectric sensor for thin panels, thickness 4 mm (Technical data subject to change and errors excepted. Prior sale reserved.)

Condition: used, Year of construction: 2003, REF 2326 BOBST MEDIA 100 III A2 Folder Gluer 2003 No. 034114107 /- 50251 working hours Max. working width: 1000 mm, min. 126 mm, Max. form length: 600 mm Cardboard: 100 – 600 g/m2 Speed up to 300 m/min Straight line gluing, Hedpfx Aex Rhdxeg Ujng Crash lock bottom device, 4-point gluing, Electronic overhead glue unit HHS 8-channel 4 glue guns Lower disc cold glue application Electronic back folding with servos, CUBE control, Barcode reader, glue control Left and right prefolder, kicker, counter, Handypack delivery from 1997

Condition: new, Year of construction: 2026, The best-selling and reliable PROD-MASZ press brake! Fast delivery time and high quality! Bending machine from the only, genuine and reliable manufacturer PROD MASZ® Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 mm - lifting of the upper beam in three positions Hodpfeb Eg Hyox Ag Usng - Upper beam stroke: 80 mm degree scale angle stop rear rack for holding the sheet metal front depth stops - Weight: about 180 kg The roller scissors (max. cutting capacity 0.8 mm / steel) The machine complies with CE guidelines and has a 12-month guarantee. Price: € 1.050.00 Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, functionality: fully functional, Year of construction: 2025, sheet thickness steel (max.): 3 mm, The TZ long metal folder series is the uniquely built next generation of the proceeding THAKO and ZR models. Uniting centuries of Swiss engineering, this long folder utilizes the time tested and innovated Vertical Force Drive (VFD) design principle, which is second to none. With the machine stands forming the shape of “rigid C-frames” and its vertical tool alignment, the VFD produces the maximum amount of vertical clamping force. The TZ long metal folder uses the perfect combination of design principles and technology to produce the perfect fold every time for a very long time. Hnsdpjurr Rpsfx Ag Ueg VFD (Vertical Force Drive) design principle Synchronized Torsion Shafts Newly designed clamping beams and the offset folding beam Dynamic Crowning System Newly designed Longitudinal Slitter

Condition: used, Year of construction: 2005, Three knife trimmer Müller Martini Esprit (1576) Year: 2005 For three side trimming of book blocks and brochures, operable in connection with book production lines. Description: - Colour monitor with touchscreen - Automatic setting Hodpfx Agsvxfkgs Uong - Infeed conveyor from the left - Left hand infeed - Exchangeable cutting tables, number: 3 - 11 - Sets of knives: 2 Technical specifications: - mechanical speed: up to 2.000 cycles/h - size range untrimmed max.: 391 x 320 mm - size range untrimmed min.: 148 x 95 mm - size range trimmed max.: 311 x 305 mm - size range trimmed min.: 142 x 75 mm - book thickness: 2 - 80 mm

Condition: good (used), functionality: fully functional, Year of construction: 2019, Motorized Swivel Bending Machine Hnjdpfx Aex Iu D Tog Uog Manufacturer: Schechtl Model: MAX 200 / STD Year of manufacture: 2019 Technical Data Make: Schechtl Model: MAX 200 / STD Year: 2019 Working length: 2040 mm Upper beam stroke: 140 mm Sheet thickness: 2.5 mm steel / 1.50 mm stainless steel / 4.0 mm aluminum Connection voltage: 3x400V, 50 Hz Dimensions: L 3,000 x W 1,400 x H 1,200 mm Weight: approx. 2 t Color: grey/blue Features - Standard control (STD type): - Electronic angle adjustment via rotary knob with scale/potentiometer - Automatic clamping pressure adjustment for the upper beam via potentiometer - Support grid, 500 mm deep, variably adjustable - Manual back gauge - Bending rails 68/10 mm and 68/24 mm, as shown in the picture - 1 foot switch All information is provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Knife mill manufactured by COMITROL, model 1700. Motor power: 22 kW. Motor pulley diameter: 100 mm. Mill pulley diameter: 70 mm. Mill rotation speed: 4200 rpm. Hnedpfx Ajxpx Dkeg Ujg

Condition: used, Year of construction: 2020, Two-sheet gluing machine for large format box production Hsdpfox Rc Sdox Ag Ujng

Condition: used, Year of construction: 2010, functionality: unexamined, Weinig RS 2000 Hodpfjwmw Dasx Ag Usng

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, Demonstration Machine Cidan MF - Manual Folding Machine The new CIDAN MF is a user-friendly manual folding machine with a compact size and low weight. This allows you to take this practical assistant anywhere and bend sheet metal directly in your construction vehicle or on site quickly and effortlessly. This machine meets the same high standards as our quality machines, which we have been manufacturing for our customers in this industry for over a hundred years. The manual folding machine is extremely robust and designed for long-lasting use. Thanks to its intuitive operation, this machine is immediately ready for use and delivers precise results. It enables efficient work, regardless of location or the operator’s experience. You can work efficiently and reliably without losing time on extensive training or setup adjustments. Hnodpfx Agsx Ngf Ss Usg Manufacturer: CIDAN Working length: 2040 mm Steel* (400 N/mm2): 0.6 mm Stainless steel* (600 N/mm2): 0.5 mm Aluminium* (200 N/mm2): 1.0 mm Weight: 140 kg For more information: cidanmachinery.com

Condition: used, Year of construction: 2008, machine/vehicle number: 608, Format: max 310 x 400 x 80 mm, min 100 x 120 x 2 mm Hnodpfx Agsx I D Emj Ueg Performance: max 3,600 cycles/h Equipment: • Automatic magazine feed with integrated counting stacker • Copilot system • 1 set of cutting tables • Knife change device • Central lubrication

Condition: excellent (used), Year of construction: 2001, Ref: 11019 . 2001 MBO Z2 Mobile Knife Can rotate 180° Hjdpfx Agoxnzrbe Ujng Left or right delivery Specification: Infeed width 15 - 48 cm Infeed length 8 - 32 cm Infeed height 45 - 95 cm Max speed: 160 cycles/h

Condition: excellent (used), Perfecta SDY 2 three-knife trimmer Hnedpjx Uz T Isfx Ag Usg Formats: max 420×300 mm min 100×140 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, Three knife trimmer automatic with integrated pre stacker Built in 2008 - Color monitor with touchscreen - Infeed conveyor - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Mechanical speed 1,000 to 7,200 cycles/hr Sizes untrimmed Standar Size Maximum 384 x 320mm (15 1/16" x 12 5/8") (Spine length x booI' width) Minimum 140 x 72mm (5 1/2" x 2 13/16") Large size Maximum 445 x 320mm (17 1/2" x 12 5/8") Small size Minimum 110 x 72mm (4 5/16" x 2 13/16") Sizes trimmed Standard Size Maximum 304 x 303mm (12" x 11 7/8") (Spine length x book width) Minimum 136 x 70mm (5 5/16" x 2 3/4") Large size Maximum 434 x 303mm (17 1/16" x 11 7/8") Small size Minimum 100 x 70mm (3 7/8" x 2 3/4") Book thickness Maximum 80mm (3 1/8") Minimum 2mm (1/16") Ttim Front Maximum 40mm (1 5/8") Minimum 2mm (1/16") Head/Food Maximum 40mm (1 5/8") Minimum 2mm ('/.") Hjdpfx Agevdqt Ro Ueng Power consumption 20 kVA Compzossed air connection 40 Nm*/h at 6 bar Exhaust 2100 Nm'/h at v = 25 mls Wei ht 5500 (12 125 bs )

Condition: good (used), functionality: fully functional, Year of construction: 1954, Working width: 2050 mm Sheet thickness: 4 mm Hnodpfxox R Tl Us Ag Ueg

Condition: good (used), Here we offer a folding machine with rotary foot punch. Hnodpox Rp T Ijfx Ag Ujg Suitable for 4 mm sheet thickness over a length of 3000 mm.

Condition: good (used), Year of construction: 2000, Maschinen Nr. 534 Built in 2000 Maximum Mechanical Speed: Up to 110 cycles/min Max. Individual Product Output: 13,000 products/hour Trimmed Format (Min. W x H x T): 100 x 120 x 2 mm Trimmed Format (Max. W x H x T): 300 x 388 x 80 mm Untrimmed Format (Max.): 310 x 400 x 80 mm Max. Pile Height (Infeed): 80 mm Max. Pressing Force: 20 KN (infinitely variable) Max. Front Trim Off-cut: 40 mm Max. Head/Foot Trim Off-cut: 50 mm Machine Length (Approx.): 2,410 mm Machine Width (Approx.): 2,260 mm Machine Height (Approx.): 1,740 mm Approximate Weight: 5,700 kg Control System: Kolbus Co-Pilot (Common) Air Consumption: 50 Nm^3/h or 30 m^3/h at 6 bar Exhaust Capacity (Trimmings): 4,000 m^3/h, 2,000 Pa Electrical Connection: 230/400 V, 3 phase, 50 Hz Hedpfx Aoxyff Nsg Usng

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year 2007 - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): 4 - 18 Hodpfx Agsu Tuiie Ujng - Knife pre-setting device - Sets of knives: 2 Condition: cleaned in good working condition

Condition: good (used), Year of construction: 2003, functionality: unexamined, Built in 2003 Size trimmed max 300 x 420 x 80 mm min 100 x 100 x 2 mm Hnodpjvtqbaofx Ag Ueg Size max 305 x 430 mm Pile height 80mm Press capacity max 20 kN Speed max 3,900 c/h Air pressure 6 bar Compressed air 40 Nm³/h - 6 bar Electric supply 400/50 V/Hz/A Length 3,300 mm Width 3,060 mm Height 1,740 mm Weight 5,170 kg (approx.) Equipment • co-pilot • right hand infeed • feeders • control with touchscreen • equipment for changing the format