Used Keyway for sale (104)

Condition: refurbished (used), power: 18.39 kW (25.00 HP), COSMEC, model SM 100 AUTOMATIC MULTI-RIP SAW Max. cutting height: 100 mm Feed chain width: 250 mm Max. saw blade diameter: 300 mm Saw blade bore: 70 mm + 2 keyways Main motor power: 25 HP (18 kW) Min. board length to be cut: 500 mm Adjustable feed speed Lodpfjzf I Dlox Afkjaf Machine in working condition, fully refurbished, with new plates on the feed belt.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake Lasdpfx Afow H Dgnjksf - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 480 kg, input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, reverse speed: 100 mm/s, workpiece diameter (max.): 800 mm, total height: 1,680 mm, Manufacturer: Wiemers AG Model: SR 30 /1000 Machine No.: WAG 3104 Year of manufacture: 2025 Weight: 480kg Ledpew D E Twjfx Afkoaf General / Technical Data: New vertical broaching machine by Wiemers SR 30 (100% compatible with Rausch RS 3) Tensile force: 30 kN (3,000kg) Broaching speeds: 3m/min & 6m/min Return speed: 6m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / Working area: 430mm x 320mm / 340mm x 220mm Table aperture: Ø 90mm for standard broaching arbors "System Rausch" Workpiece diameter: unlimited (removable coolant swivel system) Broaching capacity / keyway width: up to 20mm in steel (from 16mm broaching tool width only with stepped tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height from floor without attachments) Motor: 2.5kW/3.0kW, 2-stage for 2 working speeds Power supply: 400 Volt / 50 Hz Equipment: - Gear motor drive with 2 working speeds - Reinforced draw bridge made from tool steel for higher tensile forces - Safety door with door interlock, safety interrogation and safety monitoring - Easily removable chip chute with tool extraction protection and parking facility - Externally adjustable tool length setting system (reproducible across machines) - Protective covers for stroke adjustment and electrical switching units - Oil-tight tray on the control cabinet - Electrical sensing of clamping jaws (tool extraction monitoring prevents unintentional retraction of the draw bridge – extra safety for operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain tap - Coolant swivel system with automatic coolant switching via the swivel system - Extra reinforced chip basket and chip screen with magnetic insert - Stainless steel control panel with permanent labelling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical preparation for external control element (16-pin connector) - Provision for automatic clamping jaw opening during profile broaching with roller lever - Machine documentation with “CE” declaration of conformity Optional extras: - Automatic clamping jaw opener for easier tool extraction during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600mm - External electrical operating unit for broaching and return stroke, as well as emergency stop functionality Note: The machine is 100% compatible with Rausch broaching machines of the same performance class in the RS 3, RS 4, and RS 6 series available on the market. All fixtures, tools or arbors can be used 100% interchangeably. General information: The double spindle drive ensures a smooth and centered pulling force as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 20mm. (From 16mm keyway tool width only with stepped tool shanks) The design of the machine allows for fast and easy setup for broaching with flat broaching tools for keyways. Thanks to the universally constructed drawbridge and machine table, broaching with both profile and flat broaching tools is possible. Profile broaching can be performed without the use of additional pull heads, by using simple centering bushings. Suitable broaching tools and arbors for the machine are available on request.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, overall weight: 400 kg, input voltage: 400 V, broaching length: 1,000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of Manufacture: 1995 Weight: 400 kg Overhaul Due: 04/2025 by Wiemers AG General / Technical Data: Unused, fully overhauled mechanical vertical broaching machine Rausch RS 3, with CE marking Pulling force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / workspace: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard keyway broaches "Rausch system" Workpiece diameter: unlimited (removable coolant swiveling system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shank) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (H = including 3-sided safety enclosure) Motor: 2.5 kW / 3.0 kW Power supply: 400 Volt / 50 Hz Features: - Gear motor drive with 2 working speeds - Safety door with interlock system (emergency stop circuit) - Easily removable chip chute with tool rest - Externally adjustable tool length setting system (Rausch system) Ledew Huh Nopfx Afksaf - Protective covers for stroke adjustment and electrical switch gear - Electrical sensing of clamping jaws (tool removal check prevents unintentional return of the pull bridge, adding extra safety for operator and tool) - Integrated coolant system - Coolant swiveling system (without electrical switching function) - Three-sided splash guard enclosure with wide front opening for working area - Extra reinforced chip basket and chip screen with magnet feature - Stainless steel operator panel with permanent labeling - 4 central lubrication points for leadscrew drive with manual grease gun - New machine documentation - CE marking by manufacturer (1995) Remarks: The machine is overhauled and the machine body has been fully refurbished. The following wear parts were replaced or renewed: - New trapezoidal screws and nuts made of cast wear-resistant bronze - All bearings and seals replaced - The entire coolant system incl. coolant/lubricant swiveling system is new - New two-speed SEW gear motor - New electrical system (Siemens) - New safety door replacing the old light barrier - New clamping jaws - All sheet metal parts such as covers, chip chute, basket, screen, and spindle guard are new - Stainless steel operator panel with permanent labeling - Machine has been newly painted with 2-component structural lacquer This machine carries the manufacturer’s CE marking. General Information: The twin-spindle drive ensures quiet, centrally aligned pull and constant broaching speed. The machine is primarily designed to cut keyways up to 18 mm wide (from 16 mm tool width only with stepped tool shanks). The design allows for quick and easy setup for broaching with flat broaches for keyway slots. Thanks to the universally designed pull bridge and machine table, broaching with both profile and flat broaches is possible without requiring additional pull heads.

Condition: used, Permanent magnet DC servo motor SIEMENS Type: 1 HU3074-0AC01-Z NO.B J157 1047 01 008 Ledpfxjuch N Ie Afkjaf Voltage = 167 Volt DC = direct voltage Power = 1.8 kW Current consumption = 12.5 amps Speed = n. max.: 2000 rpm Rated torque = Mo 7 Nm Shaft diameter 24 mm Stub shaft length 50 mm Centering diameter 130 mm Bolt circle diameter 165 mm / 4 x 11 mm holes - Shaft with 8 mm keyway Housing dimensions L/W/H 335 x 140 x 145 mm Weight: 23 kg good condition

Condition: used, Synchronous servomotor with holding brake and gearbox, Gear motor, electric motor, right-angle gear motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanent magnet synchronous servomotor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 14.51 kW Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Stall torque M0: 83.4 Nm Rated current In: 31.5 A Stall current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, single pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole terminal box - Resolver connection, 12-pole terminal box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 718690 Art. No.: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Right-angle gearbox WESTFALIA Systemtechnik Hollow shaft output: inner Ø 65 mm Lasdpof Dlzuofx Afksf Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Shaft also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting holes on the gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg Good condition

Condition: used, Synchronous servo motor with holding brake and gearbox, gear motor, electric motor, bevel gearbox motor Motor: Ljdpfxef Dlzqs Afkoaf Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8015 Machine type: Permanent magnet synchronous servo motor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 12.13 kW Rated speed: 3000 rpm Rated torque Mn: 38.6 Nm Stall torque M0: 61.5 Nm Rated current In: 26.6 A Stall current I0 / I0max: 41 / 164 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft end with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole connection box - Resolver connection, 12-pole connection box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 717173 Art. No.: 228-00043 Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 160 Nm Bevel gearbox WESTFALIA Systemtechnik Shaft end output: Ø 60 mm with key Shaft end length: approx. 120 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on the gearbox 180 x 180 mm / 180 x 230 mm - Gearbox with triple chain sprocket, outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm Total weight: 175 kg good condition 2 units available, price per unit.

Condition: used, Power Chuck, SMW Power Chuck Type HFK S 160-45 Serial No. 085009 Outer diameter: 165 mm Inner diameter: 45 mm Threaded connection for clamping drive: M52 x 1.5 mm Cylindrical centering ring mount: Ø 140 mm Mounting holes: 3x Ø11 mm Bolt circle: 105 mm Max. speed: 7200 rpm Max. clamping force: 3000 daN Laodpfx Aexcbnfsfkof Jaw seating: 1/16" x 90° serration Total jaw width, serration with keyway: 35 mm Keyway width in serration: 17 mm - Jaw seating with precision ground serration - 3 pcs. soft top jaws - 6 pcs. T-nuts with mounting screws Chuck weight: 13 kg Good condition

Condition: used, Electric motor, E-motor LAMMERS Three-phase motor, high-voltage motor Type 1TZ95012AA434AB4-Z Design B3 Lodpfx Aef Axnxofkoaf Frame size 200L Motor speed 2960 rpm Current draw 54 Amps Motor power 30 kW Mains connection 400 Volts, 50 Hz Shaft diameter Ø 55 mm Shaft extension length 110 mm Keyway width in the shaft 16 mm - Foot-mounted motor with 4 mounting holes Ø 19 mm, hole spacing 315 x 300 mm Overall length of motor housing without motor shaft 620 mm Overall length of motor housing with motor shaft 730 mm Space requirement L x W x H 730 x 400 x 520 mm Weight: 205 kg Very good condition - New, unused, from warehouse clearance.

Condition: used, Keyway milling head for milling machine, milling head, CCCP / USSR STANKO Type 1502 No.: 200 Year of manufacture: 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is the same as for the standard vertical head, driven by the machine gearbox - Drive via a drive pin, centered within the centering diameter - Graduated scale on the flange plate, +/- 45° infinitely adjustable - This keyway milling head is flanged in place of the standard vertical milling head Lsdpfxjd Dk A As Afkjaf (Mounting in place of the vertical milling head) Weight: 42 kg Good condition Keyway milling head, bearing number 58166, and vertical milling head, bearing number 58164, from an identical STANKO milling machine.

Condition: used, Electric motor, E-motor VEM Three-phase motor, heavy current motor Model: IE3-W41R 250M 2 LL TPM HW Mounting: B3 Laedpfx Afjxuk Ilskjf Frame size: 250M Motor power: 55 kW Motor speed: 2970 rpm Current draw: 92 amps Mains connection: 400 volts, 50 Hz Shaft diameter: Ø 60 mm Shaft journal length: 155 mm Keyway width in shaft: 18 mm - Foot-mounted motor with 4 mounting holes Ø 24 mm, hole spacing 400 x 350 mm Motor housing length without shaft: 780 mm Motor housing length with shaft: 930 mm Space requirement L x W x H: 730 x 400 x 520 mm Net weight: 510 kg Good condition

Condition: used, functionality: fully functional, Manufacturer: Arthur Klink Year of construction: ca.1960 Type: horizontal broaching machine Model: RH 10-50 Machine. No.: 241 Weight: 3.700 KG General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design Clearing stroke: 1,500 mm Tractive force: 10,000 kg (100KN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece clamping surface: Ø 460mm Workpiece diameter: max. approx. 750mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 7 m/min Return speed: hydraulically infinitely variable from 5 m/min to 30 m/min Space requirement of the machine: (w x d x h) approx. 6500mm x 950 mm x 1,400 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 8kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system Lajdpjr A Hdgefx Afkof - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter Accessories - 1 universal pulling head for flat shafts from 3mm to max. 25mm wide - Adapter sleeve for drawbridge from Ø 85mm to Ø 63mm Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is well suited for heavy profile broaching tools. The machine is used and is in very good condition for its age. The machine is in our warehouse and can be inspected under power. The machine is currently not technically and visually refurbished, but can be used immediately. Pulling heads for profile broaching are mostly available used on request depending on DIN standard, dimensions and stock. Direct contact details and further information can be found in the attached PDF document

Year of construction: 1965, condition: good (used), functionality: fully functional, machine/vehicle number: 2549, General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter - Tractive force display Accessories - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Laedstuuvzopfx Afkof Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. The machine is available for inspection in our warehouse. The machine is new in our stock and is currently not technically or visually refurbished. Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Condition: ready for operation (used), Year of construction: 1998, overall weight: 2,900 kg, power: 8 kW (10.88 HP), input voltage: 380 V, number of broaching positions: 1, total width: 6,100 mm, total height: 1,900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General Information / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Tensile force: 10,000 kg Diameter of drawhead mount in the draw bridge: 85 mm Broaching tool clamping: universal drawhead for flat shanks up to 25 mm width Through-hole in the clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine body of the tool feeder) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Ledpfx Aoxtcz Ijfkoaf Accessories / Special Features: • The machine is equipped with manual-hydraulic control for the broaching stroke movement • The machine has an integrated coolant/lubricant system • The machine features a basic oil drip tray fitted to the machine bed, without tool feeder Remarks: The machine is ideal for the production of keyways and profiles. Broaching needles, arbors, and drawheads can be supplied on request.

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Laedper A Hcbefx Afksf Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: used, machine/vehicle number: ART 3510 / SP, wheel diameter 350 mm wheel width 100 mm elastic - solid rubber on cast wheel body axis diameter 65 mm hub keyway width 18 mm hub keyway height 5 mm hub length 100 mm Laodpfx Afodvmb Isksf weight 19.4 kg 20 units on stock - new - unused - - price per unit -  

Condition: excellent (used), Professional electric motor from the renowned German manufacturer AC-Motoren GmbH. Robust construction designed for continuous operation in machinery, pumps, fans, gear units and other industrial equipment. The motor is in good visual and technical condition. Flange-mounting type B5. Shaft with keyway. Technical data: • Manufacturer: AC-Motoren GmbH • Type: FCA 112M-4 • Power: 4.8 kW • Power supply: 3~ / three-phase Ljdpfjy Rr Inox Afksaf • Speed: 1440 rpm – 50 Hz • Speed: 1728 rpm – 60 Hz • Voltage 50 Hz: 380-420V / 660-720V • Voltage 60 Hz: 380-480V / 660-830V • Current: 8.36 A / 4.82 A • Cos φ: 0.82 • Operating mode: S1 • Degree of protection: IP55 • Standard: IEC 34-5 • Mounting: flange B5 • Shaft diameter: 28 mm • Shaft length: approx. 62 mm • Shaft with keyway • Aluminium housing Applications: • Pumps • Fans and blowers • Production machinery • Gearboxes and drives • Workshop equipment Condition: Used item, with normal signs of use and storage. The motor is in very good condition. Included: • Motor as shown in the photos

Condition: ready for operation (used), Year of construction: 2012, operating hours: 24,101 h, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Siemens 840D Shopmill 3 D Formingstar, spindle speed (max.): 12,000 rpm, coolant tank capacity: 900 l, The machine is in very good used condition with no outstanding maintenance required! TECHNICAL DETAILS Travel distance in long-operation X-axis: 1,800 mm Travel distance swivel table X-axis: 1,020 mm Travel distance rotary table X-axis: 675 mm Travel distance in pendulum operation: 675/675 mm Travel distance Y-axis: 800 mm Travel distance Z-axis: 600 mm Spindle speed: 12,000 rpm Swivel range: +10° to -100° × ±360° Feed rates X/Y/Z: 40 m/min Rotary-swivel table Rotary table size: Ø 620 × 500 mm Interference circle diameter: Ø 700 mm T-slots: 18 mm T-slot spacing: 100 mm Number of T-slots: 5 Reference keyway: 18H8 Centering bore: 30H7 × 10 mm Swivel range: +10° to -90° × ±360° Swivel speed 90°: 1.2 s Swivel accuracy: < ±10″ Rotary speed: 0–30 rpm Indexing accuracy: < ±6″ Axial runout: 0.015/Ø 300 mm Table load capacity: max. 375 kg Lodpoy A Rzdsfx Afkeaf Fixed machine table Clamping surface: 1,120 x 750 mm Max. tool weight: 10 kg Max. tool length: 330 mm Max. tool diameter: 80 mm (100 mm with adjacent pockets free) Chip-to-chip time approx.: 7.5 - 12 sec. Tool stations: 30 MACHINE DETAILS Internal coolant supply (IKZ): 40 bar Coolant tank capacity: 900 liters Tool holder: SK40 Control: Siemens 840D Shopmill 3D Formingstar Standby magazine Total positions: 190 Levels: 6 Tool length A: max. 240 mm Capacity A: 100 pcs Tool length B: max. 330 mm Capacity B: 90* pcs Tool change time: approx. 17–22 s Space required: 1,780 × 1,760 mm Height: 2,810 mm Weight: approx. 950 kg Spindle hours: 24,101 h Power-on hours: 62,438 h EQUIPMENT 3D touch probe Rotary-swivel table

Condition: good (used), Professional three-phase electric motor from the renowned German manufacturer KAISER – Elektromotoren-Werke Kaiser. Robust industrial design intended for continuous duty in industrial machines, pumps, fans, machine tools, compressors, and technological drive systems. The motor features flange mounting and a shaft with a diameter of approximately 28 mm, with a keyway. Technical data: • Manufacturer: Elektromotoren-Werke Kaiser • Type: DN 112 S/2 • Power: 4.0 kW • Voltage: 380V • Current: 9.0 A • Frequency: 50 Hz • Speed: 2880 RPM • Three-phase motor Laodpfx Afoy Nm Tvskjf • Shaft diameter: approx. 28 mm • Flange mounting • Durable industrial housing • Made in Germany Applications: • Pumps • Fans • Industrial machinery • Machine tools • Compressors • Technological drives • Production equipment Condition: Used item. Shows normal signs of use and storage. Visual condition as shown in the photos.

Condition: new, Transportable and flexible table machine, mills a keyway for theSwallow sizes Wction:Adjust the stops to measure and insert the workpiece. When the handle is depressed, the workpiececurious, excited. At the same time, the milling group moves to the set milling depth. The milled part will be at start-upof the handle is released again, the motor switches off automatically. Finished!Technical specifications:Electrical connection values 1ph/N/PE 230 V 50/60Hz 1.0 kWMotor 1 x 1000WIdle speed 34000 ual controlWorkpiece clamping manuallyPassage height 130 mmMilling depth 0-85 mmSuction connection Ø 50 mmSwallow size W-0/1/2/3/4Dimensions W/D/H 740/650/835Weight 32kgOrder No. W1031000 Ledpfx Afjvwf Dkjkoaf

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: M 09074, overall weight: 950 kg, power: 8 kW (10.88 HP), input voltage: 400 V, Technical Specifications: Manual Adjustment: 400mm manual adjustment Automatic Broaching Stroke: 250mm, automatic stroke Keyway Widths: 2 to 32mm Workpiece Diameter: 620mm Maximum Thrust Force: 20kN fixed value Cutting Speed: 15 m/min, infinitely variable Dimensions (W x D x H): 1000 x 1200 x 2440mm Net Weight: approx. 950kg Electrical Connection: 3 x 400 VAC, 50/60 Hz, 8kW Lsdpfx Afsyazc Sekeaf Pneumatic Connection: not required Colour: Blue RAL 5001, Grey RAL 7035 For further details, please see the PDF description in the attachment.

Year of construction: 2007, operating hours: 138 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 900K707385, Tablet Press PRESSIMA – as new, in ex-works condition Fully functional machine with complete documentation and software. Including multi-tip tooling set EU-D (5 × 4mm) (purchase price: €12,000, 6 months old) as well as a single-tip tooling set (5mm) EU-B. Both punch sets supplied by Ritter. The machine is equipped with an interchangeable turret. Both B- and D-type tooling can be used, in either EU or TSM standard. Operation • Suitable for small batch production • Main compression force measurement with digital readout on the machine panel • Digital display of parameters set via handwheels • Note: No automatic control system available Technical Data • Speed: 10–75 rpm • Max main compression force: 50 kN • Pre-compression force: 10 kN • Turret diameter: Ø 180 mm • Two-wheel feeder, variable speed • Drive motor: frequency controlled, 1.5 kW • Power supply: 400–480 V, 50/60 Hz • Total power consumption: 1.5 kW • Machine housing and press area: stainless steel • Press area unpainted, easy access, hard-nickel-plated surfaces • Central extraction port • Central manual lubrication pump for punches • Automatic lubrication pump for punches and guideways • Feeder motor integrated in the headpiece Mechanics • Handwheels for tablet thickness, main pressure, pre-compression, and fill • Rotary flap between fill tube and feeder • Solid pre-compression and main compression stations • Scrapers on upper and lower punches • Magnetic brakes on lower punches • 12 mm fill shoe as standard • Lower punch is lowered after dosing • Lower guideway and ejection rail easily removable • Machine status display on control panel Measuring and Analysis System • MS2300 for recording and analysis of up to 16 channels Lsdpjy Hl Aqofx Afkeaf • Measurement/analysis of: o Main compression (upper) o Main compression (lower) o Pre-compression (upper) o Ejection force o Scraping force o Upper and lower punch displacement • Measuring amplifiers for main, pre-comp, ejection, and scraping force included Equipment / Features • Upper and lower punch shank bores with 4.8 mm keyways for guided tooling • Chamber-type feeder • Turret hard chrome plated • Main compression force measurement incl. indicator on operator terminal • Accessory kit type 8 MX: o 4 EU-B blank dies o 4 EU-D blank dies o 4 plugs for EU-B/EU-D or TSM-B/TSM-D Optional • Control retrofit with Siemens S7-1200 and Siemens TP panel possible.

Condition: new, Year of construction: 2003, functionality: fully functional, overall weight: 1,760 kg, total length: 2,400 mm, total width: 780 mm, total height: 810 mm, gear ratio: 16, torque: 37,700 Nm, shaft diameter: 90 mm, hollow shaft diameter: 170 mm, 1 unused industrial slip-on bevel-helical gear for conveyor belt drives. Manufacturer: Flender Penig Type: 14LA0-355x16 el380t TGL37088 Rated power: P = 257 kW Torque: 37,700 Nm Ratio: i = 16 (15.8351) Speed n1: 1,000 rpm Speed n2: 62.5 rpm Input shaft diameter: 90 mm x 170 mm Output shaft: Hollow shaft Ø170 mm 0 = Shaft end right 355 = Size 16 = Ratio e = Anti-reverse device (input shaft rotation right) l = Fan 380 = Pump and fan voltage in volts t: 2 TPM resistance thermometer temperature monitors Hydraulic pump: 1.5 kW Lsdswmldujpfx Afkoaf Fan: 0.75 kW Dimensions: Length with fan: 2400 mm Width: 780 mm Height: 810 mm Weight with fan: 1760 kg The 14 LA series bevel helical gear units are three-stage gear units with hardened gears and welded housings. The shafts are mounted in roller bearings. The low-speed shaft is designed as a hollow shaft. The torque is transmitted from the hollow shaft to the connecting shaft via cones and keyways. The gear units can be operated in both directions of rotation. The gear units can be mounted on the right or left side without any modification to the gearbox.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 0 - 250 - 04 - 0558, Technical data : X working area 2,500 mm Working area Y 800 mm Z working area 40 mm Number of milling spindles 2 Vertical drilling spindles 16 Drilling spindles in X axis 2 Drilling spindles in Y axis 1 Vacuum pump Machine table traverse table Ljdpfxjrwmwfo Afkoaf Weight approx. 3,500 kg CNC drilling and milling center WEEKE BP 10 , built in 1991. Panel area 5,200 x 1,500 mm. Machining area 2,500 x 800 mm, 16 vertical drilling stations, 1 keyway saw, 2 milling units, support plate handwheel and hydraulic unit. In 2016 he switched to Linux CNC 3D - new computer, new monitor, new software.

Condition: used, DIN 2080 and DIN 69871 Weldon holder cylindric holder with keyway MK holder MK holder with tightening screw Kaiser holder Muti Bore Collet chuck ER Collet chuck OZ Drill chuck Lodpfsdrr Tvox Afkoaf Multi purpose attachment bolts Screw quick-action chucks Blanks