Used Karsten for sale (161)

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: N32469, National double printing press M68, used, year 1974, Hjdpowiuy Refx Aaconu

Condition: used, functionality: fully functional, mileage: 120,000 km, power: 110.32 kW (149.99 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, maximum load weight: 2,720 kg, first registration: 08/2021, next inspection (TÜV): 09/2025, fuel consumption (urban): 6 l/100km, fuel consumption (combined): 6.5 l/100km, emission class: euro6, color: white, driver cabin: day cab, suspension: other, number of previous owners: 1, Year of construction: 2021, machine/vehicle number: VXEVFAHXKM78, Equipment: trailer coupling, Hello, we are offering our Opel Vivaro for sale. The vehicle has undergone all maintenance checks. The cooling pump and timing belt were replaced at approximately 98,000 km. Hsdsv Inv Rspfx Aacsnu Current mileage is approximately 122,000. The vehicle is still being driven, so the mileage will increase. Aluminum shelves are included and can be transferred. There are two small dents on the side from parked cars. Reinforced rear springs were installed. Trailer hitch. The Opel is a very economical vehicle and, with 150 hp, has a very good engine. Navigation via Apple CarPlay. Air conditioning. The floor and side walls in the cargo area are lined. No accidents or damage. VAT is deductible. Transfer due to new purchase. Need more space. Advertising will be removed.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1731677, THERMAL & VIBRATION CHAMBER THERMAL and VIBRATION TEST CHAMBER CHART TYPE : TVC -4 Temp. Range: -100 to +200 Celsius Prod Temp Change 60 Celsius/Min Vibration level 60gRMS Hnodpfx Aev A Rrweacou Vibration Table: 61 x 61 cm Interior dimensions 76 x 66 x 91 cm Exterior dimensions 152 x 112 x 216 cm Vibration Table Size: 61 x 61 cm Weight About: 400kg Line Volt Input 400 3 Phase 50 Hz Chamber comes out of the running in 2023. Delivery including many replacement modules and parts see pictures. Shipping with a forwarding agent is possible, please inquire

Condition: new, Year of construction: 2025, New cylindrical grinding machine – or save around 70% with FlexiGrind? Simple control replacement on your old CNC cylindrical grinding machine with FlexiGrind! Modernizing existing cylindrical grinding machines has never been easier. FlexiGrind offers a cost-effective and efficient solution: Instead of a complete overhaul of the old machine, the FlexiGrind control kit replaces only the outdated electronic and electrical components. This is done directly on-site, minimizing downtime and avoiding the high costs of a complete new machine investment. Thanks to easy-to-understand installation instructions, the replacement can be performed either by your own maintenance team or our installation team. The FlexiGrind kit replaces all outdated, critical components of your cylindrical grinding machine, such as the control system, control cabinet, motors, linear encoders, and cables – in a single step. It includes the following hardware components: • Modern control system for precise grinding and easier operation from FANUC and SIEMENS • New control cabinet with a clear layout • Three new servo motors for the indexable insert, X, and Z axes • Adapters for the new servo motors Hnjdpfx Aaovfp Uvecju • New grinding spindle motor for precise spindle speeds • New absolute length measuring systems for maximum precision • New Euchner safety switches for maximum safety • Completely new cabling for reliable operation The kit also includes user-friendly software that enables simple operation and a quick return to operation. All necessary documentation for installation and programming is included. The FlexiGrind kit complies with the latest safety standards and is CE-certified. Simply replace your old control system and defective components with our new FlexiGrind control system kit. Control system conversion made easy - feasible for any maintenance thanks to the clear assembly instructions! Versatility and Compatibility The FlexiGrind kit is specifically designed for Karstens and Bahmüller CNC cylindrical grinding machines. However, it is also available for machines from other manufacturers such as Studer, Tacchella, Kellenberger, Junker, and EMAG upon request. Request a control system replacement today to get your defective or outdated cylindrical grinding machine running smoothly again!

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Technical data: - CNC universal cylindrical grinding machine WUG 21 base machine by CNC-Technik Weiss. (The WUG 21 is built on a Karstens machine bed on which the CNC machine is mounted.) Year of manufacture: 2008 / operated mainly in single-shift - 1000 mm distance between centers Hjdpfx Aajwx Sl Njcsnu - Workpiece spindle head and tailstock MK4 - Grinding wheel diameter up to 500 mm - Grinding wheel orientation 26.5° angular - Grinding wheel drive with programmable SUG - Grinding spindle head manually swiveling on air cushion - Wheel on the right - Internal grinding attachment mounted at the rear incl. dressing device - Eckelmann control - DIN programming - Cycle programs - Manual grinding: yes - Automatic dressing - Marposs acoustic emission monitoring for external grinding wheel incl. software package - Grinding wheel spindle and workpiece spindle with V-belt drive

Condition: like new (used), Hello, We are offering new Homag Benz, Homag drilling systems, Weeke, and Benz adapter units for sale. Flex 5 Plus, adjustable saw units, lock case units, tracing milling, etc. Please contact us so we can provide you with a suitable quote. Units are either new and tested or completely overhauled. Prices vary depending on the unit. The unit comes from customers who switched to 5-axis machining and no longer need it. Only tested units leave our factory. Do you need other spare parts for older machines, or repairs for drilling gearboxes and milling spindles? Hnodpjvftu Hefx Aacou

Condition: like new (used), Year of construction: 2025, We will overhaul your existing Karstens and Bahmüller brand cylindrical grinding machine. The overhaul for Bahmüller and Karstens cylindrical grinding machines includes the following: 1. Housing/full space paneling new paint in RAL 7035, RAL 7011 new polycarbonate safety screen 10 mm new bearings for workpiece change door 2. Grinding headstock complete cleaning and painting check bearings, grind in plain bearings if necessary, replace if necessary check and clean the lubrication system revise the grinding spindle new coolant hoses, taps and KM nozzles made of aluminum install new belts 3. Tailstock complete cleaning and painting revise the quill check bearings, grind in plain bearings if necessary, replace if necessary disassembly and cleaning of the fine adjustment, replace any defective parts if necessary 4. Workpiece headstock Hsdpfjvrdxisx Aacsnu complete cleaning and painting check bearings, replace if necessary check and clean the Lubrication system Revision of the workpiece spindle Install new belts 5. Hydraulics Complete cleaning and painting Storage of the hydraulic motor Revision of the pump, replace if necessary Complete renewal of the hoses Filter replacement Hydraulic plan 6. Pneumatics New maintenance unit New sealing air unit for length measuring systems New pneumatic lines/connectors/distributors and small parts Pneumatic plan 7. Lubrication for spindles Complete cleaning and painting Storage of the lubrication motor Revision of the pump, replace if necessary Check and clean the lubrication system Check and renew the lubrication monitoring if necessary 8. Central lubrication Complete cleaning and painting Storage of the lubrication motor Revision of the pump, replace if necessary Check and clean the lubrication system Check and renew the lubrication monitoring if necessary 9. Machine bed Completely clean inside and out Sand down and repaint V- and re-scrape and measure flat tracks Installation of a new control panel (rotatable) 10. X, Z axis New bearings on the X axis New ball screws New axial bearings Surface grinding, scraping if necessary Revision of the coarse adjustment of the X axis 11. Geometry Grinding and adjusting the complete geometry on the Grinding headstock, workpiece headstock, tailstock, X and Z axis Creation of a geometric protocol 12. Electrical system Construction of a new Rittal control cabinet with Siemens components, contactors, motor protection switches, Finder relays, Siemens drives, NCU, supply, Siemens PLC, etc. if necessary MPM, Jenoptik and other optional control devices Creation of a new E-Plan 8 circuit diagram Completely new cabling with PUR cables New control devices, switches, buttons (Siemens, Eaton) 13. CNC control Siemens control SINUMERIK ONE Siemens axis drives and frequency converters with CU Siemens asynchronous motor (grinding spindle) Siemens synchronous motors in X, Z, workpiece spindle 14. Length measuring systems absolute length measuring systems Heidenhain 15. Other CE marking and protocol Risk assessment Siemens Safety with acceptance protocol new operating instructions and supplier documents in paper or digital form Noise protocol VDE protocol Control version also possible with Fanuc 0i TF Plus.

Condition: like new (used), Year of construction: 2024, K11-1000 cylindrical grinding machine Also available in grinding length 650mm Make Karstens Technical data: Center width: 1100 mm Center height: 180 mm / (250 mm = option) Workpiece weight: 100 kg flying, 300 kg between centers Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MK 4, infinitely variable speed 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill stroke 45 mm Quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) Table inclination: 10 degrees Feed spindle travel: 80 mm Rapid traverse: 50 mm Coarse adjustment air cushion: 280 mm External grinding spindle motor: 4 KW / (5.5 KW = option) Stepless speed adjustment of the grinding wheel with potentiometer Internal grinding spindle motor: 2.2 KW Workpiece spindle motor: 1.1 KW Hydraulic motor 1.5 KW Lubrication motor 0.1 KW Hydraulic tank 80 liters Machine weight: Net 3800 kg Infeed drive via DC motor Air cushion-supported quick adjustment of the grinding headstock for quick and safe approach to the sanding position. Separate drive for the spindles for external and internal internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Rapid feed, rapid return, sanding mode, infeed stop, mym infeed. Automatic longitudinal sanding cycle Central coolant supply for all grinding points Workhead with infinitely variable drive with traveling and lockable spindle. Digital infeed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge-cut grinding, input for the return, infeed amounts, Hnsdpfxjtudipj Aaceu feeds, burnout times, empty strokes, compatible with the old old Karstens infeed control, with colored Siemens touch panel comparable to Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat

Condition: as good as new (ex-display), Year of construction: 2024, GP CNC-1000 cylindrical grinding machine (Fanuc) Also available in grinding length 650mm and 1500mm Make Karstens Technical data: Center width: 1100 mm Center height: 180 mm, with electric B-axis 200 mm, optionally other center height possible Max. Workpiece weight between centers: 300 kg Max. Workpiece weight on the fly including clamping device: 100 kg Workpiece headstock: MK 4, optionally other taper possible Tailstock: MK 4 Grinding wheel diameter with electrical or mechanical B-axis up to 500 mm; 600 mm diameter only for version Grinding machine with one grinding wheel Wheel arrangement: left for straight stitching machine, right for angled stitching machine 30 degrees Total connected load: approx. 30 KW Machine weight: approx. 4700 kg Basic equipment of the machine: Axes: X-, Z-, C-axis Grinding headstock: Asyncron motor 7.5 KW Constant grinding wheel peripheral speed: up to 50 m/s, preselectable cutting speed, automatic readjustment after dressing readjustment after dressing Workhead: with Fanuc servo motor 2.3 KW, Speed range: 0-560 rpm Hnsdpfx Aastudg Hscou Tailstock quill stroke: 45 mm Tailstock: MK4 with fine adjustment CNC control: Fanuc, 19.0" PC system with touch, Windows 10 IoT Enterprise GP grinding software Axis drives: Fanuc Servo Fanuc manual control unit Full enclosure with generous workpiece change door and maintenance door 2-color paint finish CE comparable to Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat

Condition: as good as new (ex-display), Year of construction: 2024, GP CNC-1000 cylindrical grinding machine Also available in grinding length 650mm and 1500mm Make Karstens Technical data: Center width: GP CNC 1000: 1000mm Center height: 180 mm optionally other center height possible Hnodett Rtzopfx Aaceu Max. Workpiece weight between centers: 300 kg Max. Workpiece weight on the fly including clamping device: 100 kg Workpiece headstock: MK 4, optionally other mounting cone possible Grinding wheel diameter with electrical or mechanical mechanical B-axis up to 500 mm; 600 mm diameter only for version Grinding machine with one grinding wheel Wheel arrangement: left for straight stitching machine, right for angled stitching machine 30 degrees Total connected load: approx. 30 KW Machine weight: approx. 4400 kg Basic equipment of the machine: Axes: X-, Z-, C-axis Grinding headstock: Asynchronous motor 7.5 KW, optionally higher motor power possible Constant grinding wheel peripheral speed: up to 50 m/s, preselectable cutting speed, automatic readjustment after dressing readjustment after dressing Workhead: with Siemens servo motor 2.2 KW, Speed range: 0-560 rpm CNC control: Siemens 840Dsl Software modules included as standard: 1) External grooving 3) External longitudinal grinding 4) Internal longitudinal grinding 5) External surface grinding 6) Face grinding inside 7) Inclined grooving 8) Wheel magazine for 8 wheels Further optional modules: Oscillating, phases, external and internal taper grinding Axis drives: Siemens Servo Full enclosure with generous workpiece workpiece change door and maintenance door 2-color paint finish CE comparable to Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat

Condition: refurbished (used), Your competent service partner for overhauling assemblies! Our service includes the overhaul of assemblies such as workhead, grinding headstock and tailstock of the Karstens and Bahmüller brands. Our service also includes the repair of the friction gear of Karstens workpiece headstocks. Cylindrical grinding machines are too heavy and too large to be easily transported. Their individual assemblies can usually be easily dismantled and shipped by a forwarding agent. We can dismantle, clean and measure these assemblies and replace parts. Hjdpfouu Enajx Aacjnu Or they can be upgraded and expanded with new technology. After completion, the assemblies are then sent back and the cylindrical grinding machine can resume its work after assembly.