Used International 955 Xl for sale (28,587)

Year of construction: 2012, condition: ready for operation (used), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible. Dodowty Etspfx Ac Hocn

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Dcedehg Rcxspfx Ac Hjn Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 70 kW (95.17 HP), type of input current: three-phase, overall weight: 750 kg, total length: 2,200 mm, total height: 2,300 mm, power: 70 kW (95.17 HP), Air-cooled Hitema chiller – 70 kW cooling capacity Also available for rental Dodjw Ufnhspfx Ac Hjcn R410A

Condition: good (used), Schmedt PraLeg HHS 1840 XL Case in machine Machine in perfect condition, purchased from the national library. Practically unused. The machine suspends the book block in a prepared hard cover. Two gluers, smooth adjustment of glue thickness. The machine has full documentation with a CE certificate. Format: Djdpfx Acewud S Ts Hjcn Block height: 80 – 440 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Efficiency approx. 200 – 300 pcs/h Power supply 230V Weight 300 kg

Condition: used, Year of construction: 2012, High-speed polyethylene extrusion line, used for single-side polyethylene coating on paper cups and other paper containers. This is an industrial extrusion coating line designed for laminating polyethylene onto paper substrates. The machine produces PE-laminated paper, commonly used in the manufacturing of food packaging (paper cups, trays, boxes, etc.). It is a specialized piece of equipment for the paper packaging industry, providing barrier properties against liquids and grease. Main technical specifications Melt slot length: 1200 mm Finished product width: 500–1150 mm Dcodpfx Acoxdimfs Hen Operating speed: 100–150 m/min Extruded film thickness: 0.01–0.08 mm Maximum roll diameter: 1200 mm Maximum extrusion capacity: 120 kg/h Installed power: 97 kW Dimensions: 7500 × 7800 × 3200 mm Weight: 14 tons

Condition: used, Year of construction: 2013, Overview  This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  Capacity: 9,000 bph to 12,000 bph Formats: Cork caps for cider and champagne glass bottles (75cl) Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of Delivery  Wirehooder Operator platforms Dodpfx Acowhk Dve Hjcn

Condition: used, functionality: fully functional, In this offer you buy a used accessory ‘Canon POD Deck Lite XL-A1’ Object of sale: 1 x Canon POD Deck Lite XL-A1: For various Canon imagePRESS models Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Dcjdpfx Aev R Tx Nsc Hsn Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: repair required (used), Year of construction: 1999, The machine offers an opportunity for hobbyists or can be used as a spare parts donor. The machine is already disassembled, meaning the body and conveyor belt are separated. The total length of the conveyor belt is approximately 12 m and consists of plastic link chains with supports and side guides, each approximately 120 mm wide. The four Leister blowers (type 5000, rarely used) are separate and functional. A wide range of accessories is included (see also photos). Please contact us if you are interested. The price is ex works and unpackaged. Djdpfx Aewmy Eyjc Hocn

Condition: new, New device MASS International NS3 Speciale Angle conveyor belt with separator available at short notice Description: L-conveyor belt with double roller separator Feed section 600 mm Rising section 1300 mm Useful width 450 mm Outside width 505 mm (without motor) Dcodpsd Tidxjfx Ac Hsn Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the feed section, as well as in the incline PU belt black with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m / min Mobile on steerable stop rollers Side collecting plates in the feed section Double roller separator with covered belt drive Coated with Super Grip Adjustable discharge chute

Condition: new, Year of construction: 2024, functionality: fully functional, The conveyor belt is for sale and has the following dimensions; infeed : 600 mm Ascending belt: 1300 mm Useful width: 450 total width: 505 mm height adjustable: 750 - 1.050 mm Belt speed constant: 3m /min Dcodolikx Ispfx Ac Hjn

Condition: new, New device MASS International Angled conveyor belt / Conveyor belt L - Conveyor belt with fixed angle 35° available at short notice MASS International NC1 angled conveyor belt Fixed angle conveyor belt with collecting plates in the feed section Dedpfx Ashm Axgec Hjcn Example: NC 1 Feeding section 600 mm Rising part 1300 mm Effective width 250 mm Outer width 305 mm (without motor) Height-adjustable delivery height 750 - 1050 mm Fixed angle between feed and riser sections Variable inclination adjustment Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m /min mobile on steerable stop rollers Optional: Dimensions on customer request FDA compliant belt Modified belt speed etc.

Condition: new, Year of construction: 2022, - Delivery 500 mm Dedpfx Acsg Arxvs Hecn - Climbing belt 1300 mm - Feed 600 mm - useful width 450 mm / total width 505 mm - delivery height : min: 700mm max : 1000mm - cleats 30 mm high (from a useful width of 350 mm the cleats are divided in the middle) - cleat spacing 500 mm Possible on request: - Special size - cycle control - frequency converter (485 €) - Corrugated edge (492 €)

Condition: new, New device MASS International Conveyor belt NI 1 Conveyor belt/unloading conveyor Angle-adjustable conveyor belt with hopper in the feed section available at short notice Example: NI 1 Length 1500 mm Effective width 250 mm Dsdoh Nyp Uepfx Ac Hecn Outer width 305 mm (without motor) Height-adjustable dispensing height 600 - 1000 mm Variable inclination adjustment Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m /min mobile on steerable stop rollers Optional: Dimensions on customer request FDA compliant belt Modified belt speed etc.

Condition: new, Year of construction: 2022, For sale is a CTM CT 200 tank from MASS. Dedpfx Asip Ucnjc Hecn This is available in different sizes (see pictures).

Condition: new, New device MASS International Deposit conveyor NCRS1 available at short notice Adjustable angled conveyor belt, for picking up finished parts from handling or manual depositing and feeding of parts to working height or container Example: NCRS 1 Feeding section 600 mm Descending section 1800 mm Effective width 350 mm Outer width 405 mm (without motor) Pick-up height feeding section 1000 - 1500 mm Discharge height of descending section 500 - 1000 mm Adjustable angle between feed and discharge sections Variable inclination adjustment Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m /min mobile on steerable stop rollers Optional: other sizes see standard list Dimensions on customer request FDA compliant belt Modified belt speed Dcodsh Nytijpfx Ac Hon etc.

Year of construction: 2022, condition: new, Task: 600 mm Climbing belt: 1.800 mm delivery: 500 mm useful width: 450 mm Dedpfx Aceiq U S Tj Hecn Total width: 505 mm Height: 1.000-1.300 mm

Condition: new, New device MASS International Deposit conveyor NPS Conveyor belt/deposit belt Available at short notice Deposit area without side wall Height adjustable, movable on steerable stop rollers Example: NPS 1 Length 1500 mm Useful width 250 mm External width 250 mm (without motor) Deposit area without side wall, therefore full usable width Height adjustable Delivery height 200 - 400 mm PU belt Smooth, black Belt speed 3 m /min Movable on steerable stop rollers Dedpfx Ajizi S Dec Hocn Optional: Dimensions on customer request FDA compliant belt Changed belt speed etc.

Year of construction: 2022, condition: new, - Delivery 500 mm - Climbing belt 1300 mm - Feed 600 mm - useful width 350 mm / total width 405 mm - delivery height : min: 700mm max : 1000mm - cleats 30 mm high (from a useful width of 350 mm the cleats are divided in the middle) - cleat spacing 500 mm Possible on request: - Special size - cycle control - Frequency converter Djdpjf U Eu Hefx Ac Hecn

Condition: new, New device MASS International Z-conveyor belt NDZ3 Angle conveyor belt / conveyor belt Dcedeiz S Htopfx Ac Hsn available at short notice Description: Height-adjustable angle conveyor belt with adjustable angles Feed section 600 mm Rising section 1300 mm Discharge section 500 mm Useful width 450 mm External width 505 mm (without motor) Height-adjustable discharge height 700 - 1000 mm Adjustable angles for feed section and discharge section Adjustable incline PU belt Color black L studs Stud spacing 500 mm Stud height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on steerable stop rollers Side collecting plates in the feed section

Condition: new, New device MASS International Z-conveyor belt NDZ1 Z conveyor belt/angled belt available at short notice Description: Height-adjustable angled conveyor belt with adjustable angles Feeding section 600 mm ascending section 1300 mm discharge section 500 mm Useful width 250 mm Outer width 305 mm (without motor) Height-adjustable delivery height 700 - 1000 mm Adjustable angles for feed section and discharge section Adjustable inclination PU belt Dcedpfjk Ixlmsx Ac Hen Color black L Cleats Cleat spacing 500 mm Cleat height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button mobile on steerable stop rollers three-part hopper plates for feed section

Condition: new, New device MASS International Angle conveyor belt NC3 available at short notice Description: Feed section 600 mm Rising section 1300 mm Usable width 450 mm Outside width 505 mm (without motor) Height adjustable discharge height 750 - 1050 mm Angle between feed section and rising section fixed 45° L - studs Stud height 30 mm Stud spacing 500 mm Dcodek Ixlujpfx Ac Hon PU belt Color black Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on steerable stop rollers Side collecting plates in the feed section

Condition: new, New device MASS International NS3 Speciale Angle conveyor belt with Supergrip belt and separator available at short notice Description: L-conveyor belt with double roller separator Dcsdpfx Acolrqiue Hjn Feed section 600 mm Rising section 1300 mm Usable width 450 mm External width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the feed section, as well as in the incline PU belt Black Supergrip Belt speed 3 m / min Mobile on steerable stop rollers Side collecting plates in the feed section Double roller separator with covered belt drive Coated with Super Grip Adjustable discharge chute Can be ordered optionally: Belt with FDA approval Other dimensions etc..

Condition: new, New device MASS International Dedper A D Ihjfx Ac Hocn Angle conveyor belt NS3 L-conveyor belt / assembly line available at short notice, Description: Feed section 600 mm Rising section 1300 mm Usable width 450 mm Outside width 505 mm (without motor) Height adjustable Discharge height 750 - 1050 mm Angle between feed section and rising section adjustable 30 - 50° L - studs Stud height 30 mm Stud spacing 500 mm PU belt Color black Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on steerable stop rollers Side collecting plates in the feed section

Condition: new, New device MASS International Dodpsr A D S Eefx Ac Hecn Angle conveyor belt NDS 2 L conveyor belt/conveyor belt available at short notice Angle conveyor belt with adjustable angles incl. paddle separator and collecting plates in the feed section Feed section 600 mm Rising section 1300 mm Discharge section 800 mm Useful width 350 mm Outside width 405 mm (without motor) Height adjustable Discharge height 700 - 1000 mm Adjustable angles for feed section and discharge section Adjustable incline PU belt Super Grip Belt speed 3 m/min Mobile on steerable stop rollers Side collecting plates in the feed section Paddle separator separately controllable and height adjustable

Condition: new, New device MASS International Model NS1 Angle conveyor belt / L - conveyor belt / assembly line available immediately Dsdpfx Acsuip Ils Hocn adjustable angle conveyor belt NS1 with collecting plates in the feed section Description: Feed section 600 mm Rising section 1300 mm Usable width 250 mm Outside width 305 mm (without motor) height adjustable discharge height 750 - 1050 mm adjustable angle between feed section and rising section variable inclination adjustable Stud height 30 mm Stud spacing 500 mm belt speed 3 m /min mobile on steerable stop rollers three-part funnel plates for feed section Other angle conveyor belts can be ordered in other dimensions, see list in Figure 4. Dimensions according to customer requirements are no problem.