Used Internal Cylindrical Grinding Machine for sale (89,655)

Year of construction: 2003, condition: ready for operation (used), Control Unit Brand FAGOR This Reform AR 40/7 was manufactured in 2003. A robust horizontal grinding machine with a working length of 4000 mm, ideal for extensive grinding tasks. Consider the opportunity to buy this Reform AR 40/7 horizontal grinding machine. Contact us for further details regarding this machine. Application Types Nwsdjxx Dwuopfx Aghep Grinding

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Nwedpfjw T Sc Nox Aghop Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: used, Year of construction: 2000, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Photo of machine already delivered in similar scope: -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Nwedpfx Agoxzk Niehjp Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: good (used), Year of construction: 1988, Ref. -No.: 10396 Manufacturer: KELLENBERGER Type: 600 U - Nr. 40 Year of construction: 1988 Type of control: Konventionell Control: N/A Nwjdpfx Agjxvw E Tshop Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500/1700/2200/3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400/10-400 Max. Grinding length: 900 mm

Condition: good (used), grinding length: 1,000 mm, grinding diameter: 350 mm, We are selling our cylindrical grinding machine Kellenberger 1000U Grinding diameter: 350 mm Grinding length: 1000 mm This machine features a reinforced headstock and can be elevated. Remarks: Njdpfjxzqivox Aghowp - The price does NOT include any accessories! - Collection by the buyer, ex works. - The collection date will be arranged in consultation with the seller. - No warranty - Advance payment (invoice) or cash payment upon collection.

Condition: used, Year of construction: 1998, functionality: fully functional, workpiece weight (max.): 150 kg, grinding length: 1,000 mm, grinding wheel diameter: 455 mm, grinding diameter: 300 mm, workpiece weight between centers: 150,000 g, workpiece diameter between centers: 300 mm, grinding wheel width: 75 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 7,500 W, overall weight: 5,600 kg, Equipment: rotational speed infinitely variable, The machine is fully operational and can be inspected under power. OKAMOTO Model OGM-3100 P NC Year of manufacture: 1998 Control: Fanuc 18 GCA Maximum swing diameter: 320 mm Maximum distance between centers: 1,000 mm Maximum workpiece diameter to be ground: 300 mm Maximum workpiece weight between centers: 150 kg Grinding wheel: diameter x width x bore: 455 x 75 x 127 mm Wheel speed: stepless Peripheral speed: 45 m/sec Grinding spindle head (X-axis): max. travel 300 mm Swivel angle of workpiece table: not swiveling Nwjdoxy Hvpjpfx Aghep Workpiece table (Z-axis): travel: 1,150 mm Swivel angle: 0 – 10° Workpiece spindle head: fixed/rotating type Spindle mount: MT 4 Spindle bore diameter: 20 mm Spindle speed: 10 – 500 rpm Swivel angle of grinding spindle: not swiveling Tailstock type with manual fine taper adjustment Quill stroke: 30 mm Mount: MT 4 Grinding wheel drive: 7.5 kW Dimensions/Weight Length x width x height approx. 4,243 x 2,490 x 1,860 mm Machine weight approx. 5,600 kg Standard equipment: - Complete FANUC keyboard with radius compensation for creation of ISO programs - Shop floor programming graphical software for grinding and dressing cycles with teach-in function - GAP eliminator - Shoulder positioning - Lamp - Documentation - Leveling screws and mounting plates Accessories: - Marposs measuring control Ø 8 – 92 mm - Various flanges - Various grinding wheels - Band filter All information subject to change; intermediate sale reserved. Prices: plus VAT Terms of payment: net, payment before loading

Condition: used, Year of construction: 2007, oil mist extraction ja Nwjdpfx Aewgi Rfeghjp serial number 2342-11

Condition: excellent (used), functionality: fully functional, Kellenberger cylindrical grinding machine in very good condition. Available at a favorable price. Price significantly reduced !!!!! Njdpfx Asxzi Idjghswp

Condition: defective spare-parts repository (used), We offer you: Cylindrical grinding machine Manufacturer: Karstens Nwjdjxxxrtjpfx Aghjp For spare parts The main spindle grinding head is missing Accessories, illustrated tools, and clamping devices are only included if stated in the additional information. Subject to changes and errors in technical data and details, as well as prior sale!

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, workpiece weight (max.): 130 kg, center width: 600 mm, grinding wheel diameter: 450 mm, total width: 2,110 mm, total length: 3,120 mm, total height: 1,435 mm, grinding diameter: 350 mm, quill stroke: 30 mm, grinding wheel width: 50 mm, grinding spindle speed: 2,000 rpm, overall weight: 3,100 kg, Max. Sanding diameter: Ø350mm Max. Workpiece weight: 130 kg Sanding length between centers: 600 mm Sanding spindle speed: 1500 or 2000 rpm (manual belt change) Standard grinding wheel: Ø 450 x Ø127 x 50 mm Grinding wheel width: from 25 to 50 mm Z-axis travel: 750 mm Nwjdpfx Asc Tnq Ijghjp X-axis travel: 265 mm Grinding spindle power: 3.7 kW Including the following standard accessories: - 120 liter coolant tank with 0.4 kW pump (200 l/min) and magnetic separator - Hydraulic tailstock - Removable splash guard - Hydraulic unit - Standard grinding wheel Ø 450 x Ø127 x 50 mm - 1 grinding wheel flange - 1 grinding wheel flange Dresser - Dressing holder with dressing diamond on tailstock - 2 centering centers - Dial gauge for table adjustment to 0 - Machine light - 3 unscrewable hooks for transportation by crane - Leveling screws with mounting plates - Machine documentation Including the following special accessories: - Internal grinding device - Inverter (Mitsubishi) for speed control on the work spindle - Inverter for speed control on the grinding spindle with 5.5 kW motor, incl. display - 2-axis digital display Heidenhain ND 780

Condition: used, center height: 100 mm, grinding length: 500 mm, Cylindrical grinding machine FORTUNA R 500 for sale. The machine was last operated in 2017 and has been stored in a warehouse since then. Therefore, it is being sold as defective – without warranty. Loading is possible. Nwedpfxexx T Ezo Aghop

Condition: like new (used), Year of construction: 1995, functionality: fully functional, center height: 225 mm, workpiece weight (max.): 100 kg, grinding length: 1,600 mm, CNC cylindrical grinding machine STUDER S40, year of manufacture 1995. The machine is in good used condition. Technical data: • Control: Fanuc Series 16-GC • Required space approx. (Height/Length/Width): 250 cm / 650 cm / 320 cm Axes: • Distance between centers: 1,600 mm • Center height: 225 mm • 4 axes (X, Z, B, C) • Max. workpiece weight approx.: 100 kg Equipment: Nwsdpfxjt N Ivco Aghjp • 2 grinding wheels + 1 internal grinding stone (selectable via control) • Face, plunge, internal, and cylindrical grinding • Magnetic chuck, three-jaw chuck, collets, between-centers grinding • Automatic dressing device • Steady rest • Resolution: 0.0001 mm • Polygon grinding • Static balancing unit • Grinding wheels available in corundum, diamond, and CBN • Cycle control • DXF import possible

Condition: used, Year of construction: 1998, centre height 125 mm centre distance 400 mm Control FANUC 21i Nodexwdwfepfx Aghswp Capstan diameter max. 406 mm wheel dimensions 406 x 127 x 40 mm workpiece weight 30 kg longitudinal slide -travel 483 mm cross slide - travel 254 mm total power requirement max. 20 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 3,0 x 2,0 x 2,1 m including 2 Pcs. internal grinding spindle incl. B axis 1° Hirt, controlled incl. C-axis incl. Quick-Set Probe including Sensitron including Magnetic Jaw including hydraulically foldable dresser including other small accessories including documentation without a coolant system, as it was previously connected to a central unit Power On hours approx. 71,000 h Spindle hours approx. 25,900 h

Condition: excellent (used), functionality: fully functional, Used Kellenberger cylindrical grinding machine for sale in very good condition. Price significantly reduced !!!!! Nedpfx Agjxzi Htshjwp

Year of construction: 1971, condition: ready for operation (used), A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible. Nodpfx Ajxyk S Uoghjwp

Condition: good (used), grinding length: 500 mm, A Studer cylindrical grinding machine of the type RHU 500 is for sale The machine is in good condition and fully operational, the guides show hardly any signs of wear. Technical data Grinding wheel diameter: Ø 250 mm Sanding length: 500 mm Sanding wheel size: 400 x 50 mm On request, dismantling, loading and transport can be organized throughout Europe for an additional charge Prices plus VAT Glnld8 Nwjdpfxjqzh Elo Aghep Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 12000 kg Movement X-Axis Movement 450 mm Z-Axis Movement 850 mm Nwodpfx Agoxvt Anohjp This STUDER S242 was manufactured in 2008, a cylindrical grinding machine known for its robustness and precision. It features a swing diameter of 180 mm, max workpiece weight of 20 kg, and grinding spindle speeds up to 50 m/s. The machine includes shaft automation, grinding wheels, and is still powered up and fully functional. Annual maintenance by Studer ensures reliability. For more information about this machine, please reach out to us. Application Types Grinding

Condition: used, Year of construction: 2017, grinding length 1000 mm Nwodpfswp Tumjx Aghjp centre height 180 mm length 3600 mm width 1650 mm height 1800 mm weight of the machine ca. 3,7 t

Condition: good (used), Year of construction: 1968, Cylindrical grinding machine, manufacturer: STANKOIMPORT, type: XC3, year 1968, with accessories. Model: 3A 161. Centre height: 161 mm, grinding diameter: 322 mm. Centre distance/grinding length: 1000 mm. In good condition. Nsdpexq Tlrjfx Aghowp

Condition: refurbished (used), functionality: fully functional, Kellenberger 1000U cylindrical grinding machine with many accessories available at a favorable price. A total of 3 machines are for sale. All machines are in very good condition and fully operational. One machine was purchased as fully overhauled in 2019. Prices are negotiable. Nwodpfexzi E Nsx Aghsp

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,073 h, functionality: fully functional, machine/vehicle number: 80171, grinding diameter: 500 mm, overall weight: 10,000 kg, controller model: FANUC SERIES OI-TF, Equipment: bar feeder, No reserve price – guaranteed sale to the highest bidder! Payment for the machine is due by 04/12/2025! Placing a bid obligates you to collect the item within the specified period between 10/12/2025 and 12/12/2025! The machine can be inspected on 25/11/2025! TECHNICAL DETAILS Nwjdpfxexvbufe Aghep Grinding diameter: 500 mm Lining width: max. 32 mm Cut-off wheel permitted diameter: max. 520 mm Cut-off wheel lining width: max. 3 mm Cut-off wheel lining height: max. 5 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 8,500 x 3,500 x 2,900 mm Total weight: 10,000 kg Control model: FANUC SERIES OI-TF Operating hours Machining hours: 5,073 h Run time: 12,219 h Control power-on hours: 32,335 h EQUIPMENT FMB Minimag 20 bar feeder Extraction system Various documentation

Year of construction: 2002, condition: ready for operation (used), General Data Machine weight 11000 kg Control Unit Brand FANUC Main Drive Number of axis 2 Spindle motor power 24 kW This JUNKER jucam 5002/51 cylindrical grinding machine was manufactured in 2002. It features a FANUC control system, MARPOSS verification, and a robust 24 kW main drive motor. Capable of grinding lengths up to 1000 mm and diameters up to 280 mm, it supports workpieces from 20 to 80 mm. Weighing 11,000 kg, it ensures stability and precision. Contact us for more information about this machine. Application Types Grinding Nwedpfexwqtysx Aghep

Condition: used, Year of construction: 1999, grinding diameter 120 mm centre height 100 mm Stirnschleifeinrichtung Nedpfx Asw Sybdoghewp Kein Typenschild auffindb

Condition: used, Year of construction: 2017, grinding length 1500 mm Nodswm Rqgjpfx Aghewp centre height 180 mm weight of the machine ca. 3,9 t dimensions of the machine ca. L: 4900 x 1650x 1800 m

Condition: used, Year of construction: 1960, grinding diameter ca. 360 mm grinding length 1500 mm Nodpfx Agsw Sya Tohswp serial number 12013