Used Infotec Cnc for sale (8,613)

Condition: refurbished (used), functionality: fully functional, Cold Radial Forging Machine GFM SX-10 YOM: 1971/2024 CNC: Siemens SINUMERIK ONE with PLC 1500 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Lodjq U R Ruopfx Aalohd Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx: 9100 mm Width (with electrical cabinets and control panel) approx.: 4500 mm Height forging machine approx.: 2150 mm Forging height above floor: 1250 mm Weight (forging machine) approx.: 29000 kg The machine is completely revamped with a new Electrics, Hydraulics, new Control and with functionality test before delivery.

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Lhodjq U Sa Sepfx Aalsd Machine net weight: 124.490 kg

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Lhedpfx Aasq U R T Nolod Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: used, Year of construction: 2012, Model Year: 2012 Width: 1,050 mm Length: 515 mm Lhedpex Tuddefx Aaljd Height: 600 mm Number of Axes: 3 Holder: BT40 Spindle Speed (RPM): 8,000 Processable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: good (used), Year of construction: 2008, spindle speed (min.): 4,000 rpm, travel distance Z-axis: 500 mm, throat depth: 300 mm, Year of manufacture: 2008 Chuck diameter: 8" Number of axes: 3 Lhodpfx Aaox Nvm Soled Length: 500 mm Neck diameter: 300 mm Spindle speed (rpm): 4000 Machinable material types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Derlin, Peek

Condition: good (used), Year of construction: 2008, spindle speed (min.): 4,000 rpm, travel distance Z-axis: 500 mm, throat depth: 300 mm, Model Year: 2006 Chuck Diameter: 8" Number of Axes: 3 Lhedpjx Nvm Esfx Aalsd Length: 500 mm Swing Over Bed: 300 mm Spindle Speed (RPM): 4000 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: good (used), Year of construction: 2008, spindle speed (min.): 5,000 rpm, travel distance Z-axis: 600 mm, throat depth: 300 mm, Year of manufacture: 2008 Chuck diameter: 10" Number of axes: 3 Lhedpfx Ajx Nvmrjalsd Length: 600 mm Swing diameter: 300 mm Spindle speed (rpm): 5000 Processable materials: Steel, Aluminium, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: used, Year of construction: 1995, functionality: limited functionality, bar diameter (max.): 75 mm, cnc old machine spindle hole 75 mm Lhodpsyv Uplofx Aalsd

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1235, controller manufacturer: Germany Beckhoff, working width: 1,200 mm, bending angle (max.): 90 °, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, total length: 1,685 mm, total width: 1,262 mm, type of input current: three-phase, workpiece length (max.): 1,200 mm, workpiece height (max.): 430 mm, nominal power (apparent): 3 kVA, number of spindles: 6, opening width: 400 mm, - Germany Beckhoff System, Closed-loop control, High bending accuracy. - Italy GIVI MEASURE precision linear encoder. -High strength machine body after heat-treated. - No need to change bending tool. - The Blank-holder tool can automatically change the length basic on the sheet length. - Multilateral automatic continuous bending. -Automatic programming software can finish all the process Lsdpfxewfwkqs Aalehd - Automatically check and optimize. the process -All servo motor control, fast and energy saving - Automatically control pressing force.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1032, warranty duration: 12 months, total width: 2,300 mm, total length: 1,685 mm, bending angle (max.): 90 °, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, nominal power (apparent): 4 kVA, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, type of input current: three-phase, -Complete machine frame processing -Double-cylinder electro-hydraulic synchronous control -A variety of electro-hydraulic CNC systems are optional Lsdpewfwkwefx Aalshd -Mechanical compensation -Segmented mold -High-precision back gauge structure -Scalable number of axes

Condition: new, functionality: fully functional, Year of construction: 2025, controller manufacturer: Self-developed brand, workpiece length (max.): 2,000 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, machine/vehicle number: 2016, Product Features: The KaFe manual Panel Bender (Bending Center) is a next-generation, fully automatic multilateral bending center, offering high precision and efficiency. It represents a benchmark for automated production in the sheet metal manufacturing industry. It significantly reduces labor costs and boasts a bending speed three times that of CNC press brakes, reaching 0.5 seconds per cycle. Full servo control ensures product accuracy within 3 seconds. Product Function: Lodpjxu Uhvefx Aalshd The KaFe Manual Panel Bender (Bending Center) can bend sheet metal into various complex shapes without the need for molds. Equipped with a pure electric servo system, it replaces hydraulic drive and offers environmentally friendly, high-speed, high-precision, and maintenance-free features. This high-tech product was developed and manufactured to improve production efficiency, reduce labor intensity, and enhance corporate image in the sheet metal industry.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm Ljdpfxsxdmgvo Aaljhd CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar passage: 34 mm, controller model: Fanuc 21T Modell B, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bar capacity: 34 mm MACHINE DETAILS CNC control: Fanuc 21T Model B EQUIPMENT CS axis left CS axis right Approx. 26 fixed tool holders 2x driven tool holders (1x axial, 1x radial) Ledpfx Ajyrf Enoalohd Hainbuch collet chucks left and right Chip conveyor Manuals Note: The bar feeder is not included in the offer.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150602, turning length: 1,190 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 440 mm, TECHNICAL DETAILS Travel X-axis: 230 mm Travel Z-axis: 440 mm Turning diameter: max. 320 mm Turning length: max. 1,190 mm Bar capacity diameter: max. 51 mm Swing diameter: max. 320 mm Spindle nose: A2-6 Draw tube thread: M60 x 2 Main spindle speed: 35–5,000 rpm Driven tool speed: 4,500 rpm Rapid traverse speed: 30.5/33 m/min Ledpfx Aoypdw Dsalohd Turret stations: 24 Tool holder / Turret type: VDI MACHINE DETAILS Electrical and Safety Voltage: 400 V Protection class: 1 Connected load: 77.4 kW Footprint & Weight Footprint: 6.5 m² Machine weight: 7,900 kg EQUIPMENT Portal loader GL 100 F

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, empty load weight: 8,400 kg, Lathe with gantry loading! Lhsdpeypc Ibsfx Aalsd MACHINE DETAILS Weight: 8,400 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 538 mm, turning diameter: 350 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 535 mm, controller model: Mazatrol PC Fusion 640T, Mazak Super Quick Turn with IEMCA TAL/AUTO 65/32 bar feeder! The machine operated in single-shift mode at 80% utilization! TECHNICAL DETAILS Turning length: 538 mm Maximum turning diameter: 350 mm Maximum turning diameter from feeder: 70 mm Maximum swing diameter: 525 mm Ljdpoytcmxjfx Aaljhd X-axis: 190 mm Z-axis: 535 mm Spindle speed range: 35–5,000 rpm Number of tool stations: 12 positions Bar feeder Maximum bar length: 3,200 mm Minimum bar length: 400 mm Maximum bar diameter: 32 mm Minimum bar diameter: 5 mm Bar feeder weight: 850 kg MACHINE DETAILS Control: Mazatrol PC Fusion 640T Voltage: 400/230 V 50 Hz Control voltage: 230 V / 24 V Dimensions & weight Dimensions (L x W x H): approx. 4,000 / 5,700 x 1,800 x 2,000 mm Total weight: approx. 5,000 kg EQUIPMENT Chip conveyor KSF 60/S4 bar chuck IEMCA TAL/AUTO 65/32 bar feeder Note: The machine is sold without tool holders.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 1,500 mm, turning diameter: 500 mm, spindle speed (max.): 3,000 rpm, quill stroke: 150 mm, controller model: Siemens 802 C, No reserve price – guaranteed sale to the highest bidder! Lhodeyuymfepfx Aalod TECHNICAL DETAILS Turning diameter: 500 mm Turning diameter over cross slide: 280 mm Turning length: 1,500 mm X-axis travel: 295 mm Z-axis travel: 1,435 mm Spindle bore: 82 mm Spindle speed: 20 – 3,000 rpm Longitudinal feed: 5,000 mm/min Cross feed: 5,000 mm/min Rapid traverse longitudinal: 5 m/min Rapid traverse cross: 5 m/min Quill stroke: 150 mm Bed width: 350 mm MACHINE DETAILS Control: Siemens 802 C Main motor: 7.5 kW Dimensions & Weight Footprint: approx. 3.23 x 1.47 x 1.73 m Machine weight: approx. 3 t

Condition: not inspected (used), functionality: unexamined, turning diameter over cross slide: 160 mm, turning length: 1,000 mm, turning diameter: 315 mm, spindle speed (max.): 3,300 rpm, bar passage: 52 mm, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nTurning diameter: 315 mm\nTurning diameter over cross slide: 160 mm\n\nTurning length: 1,000 mm\n\nSpindle speed range: 30 – 3,300 rpm\n\nSpindle bore: 52 mm\n\nNumber of tool changer positions: 12\n\nMACHINE DETAILS\n\nControl model: Siemens Sinumerik 802 D\n\nMachine weight: approx. 6 t\n\nNote: The machine has been overhauled! Ledpfsyv Aucex Aalohd

Condition: good (used), Year of construction: 2011, Swing 806mm, maximum cutting diameter 533mm, 762mm between centres, 660mm maximum cutting length, 76mm Bar capacity, 254mm 3 jaw chuck, 22.4kW Spindle Motor, 3400rpm spindle, Lodpfx Aasywuvhjlshd 12 Station turret, tailstock, coolant, tool setter.

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 550mm, swing over bed 950mm, Swing over cross-slide 715mm, spindle speed 3,500rpm, Lsdpfx Aasywuibslshd Y axis +80/-60mm, distance between centres 898mm, milling speed 12,000 rpm, main spindle bar capacity 78mm, 16 station turret, spindle power 40/25Kw, Fanuc I series control, 3 jaw chuck main, tool setter, swarf conveyor,

Condition: excellent (used), Year of construction: 2018, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: KC1811242, turning diameter over cross slide: 325 mm, turning length: 1,285 mm, turning diameter: 570 mm, spindle bore: 80 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 40 rpm, travel distance X-axis: 310 mm, travel distance Z-axis: 1,285 mm, spindle motor power: 7,500 W, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 10 m/min, rotational speed (min.): 1,600 rpm, rotational speed (max.): 40 rpm, total height: 1,700 mm, total length: 3,070 mm, total width: 1,300 mm, quill travel distance: 150 mm, quill diameter: 75 mm, quill stroke: 150 mm, swing diameter over cross slide: 325 mm, turning diameter over bed slide: 570 mm, turning diameter over top slide: 325 mm, type of input current: three-phase, overall weight: 2,560 kg, swing diameter over bed slide: 570 mm, bar passage: 75 mm, chuck outer diameter: 300 mm, swing diameter over top slide: 325 mm, center height: 280 mm, bar diameter (max.): 75 mm, mount diameter: 32 mm, Equipment: documentation/manual, 2018 Dugard Lunan 570MF CNC Lathe – Excellent Condition 📍 Location: Ireland 🔧 Machine Type: CNC Lathe 🛠️ Manufacturer: Dugard 📅 Year of Manufacture: 2018 ⏱️ Machine Hours: Only 2,300 ✅ Condition: Very Good / Fully Functional 💡 Why Choose This Machine? The Dugard Lunan 570MF is a solid, well-built CNC lathe designed for medium to heavy-duty turning applications. With Siemens 828D control, only 2300 working hours, and a complete set of chucks, steadies, and accessories, this machine is ideal for general precision engineering, subcontractors, and educational/training use. It’s well maintained, ready to work, and represents excellent value. Buy a 2018 Dugard Lunan 570MF CNC Lathe in excellent condition. Featuring 570mm swing, Ø80mm spindle bore, 400mm chuck, and 7.5kW power. Available now from Used Machine Tools Ireland. International delivery available. 🧰 Machine Includes: Siemens 828D CNC Control System 320 mm 3-Jaw Chuck 400 mm 4-Jaw Chuck Travelling Steady Fixed Steady Coolant Equipment Tailstock Operator Manuals Selection of Tool Holders & Chuck Jaws 🔹 Technical Specifications Max Swing Diameter Over Bed: Ø570 mm Max Swing Diameter Over Slide: 325 mm Ledowv Sx Rjpfx Aaljhd Distance Between Centres: 1500 mm Span of X/Z Axis Guide Rails: 420 mm Max Turning Length: 1285 mm Center Height: • To Bed: 280 mm • To Ground: 1170 mm Spindle Bore Diameter: Ø80 mm Bar Capacity: Ø75 mm Spindle End Type: D8 Chuck Size: Ø300 mm or Ø400 mm Spindle Speeds: 3-Speed Manual Ranges: • 40–150 rpm • 130–470 rpm • 450–1600 rpm Taper of Spindle: Metric 90, 1:20 Turret: 4-Position Electric Turret Tool Size: 32 × 32 mm Tailstock: • Quill Diameter: Ø75 mm • Stroke: 150 mm • Taper: MT5 End Bracket: Hand-operated type Screw Model: • X-Axis: FFZD2504-3-P3 • Z-Axis: FFZD4008-5-P3 Rapid Traverse (X/Z): 6 / 10 m/min X-Axis Stroke: 310 mm Minimum Set Unit: 0.001 mm Main Motor Power: 7.5 kW Power of Main Supply: 12.5 kW Net Weight: 2560 kg Dimensions (L×W×H): 3070×1300×1700 mm 💡 Features & Benefits: Robust and versatile CNC lathe ideal for medium to heavy-duty turning High-torque spindle and large bore suitable for tough materials Reliable FANUC control system with user-friendly interface Well maintained and fully serviced – ready to run Ideal for sub-contract machine shops, tool rooms, and general precision engineering 🚚 Delivery Options Available We offer nationwide & International delivery Dugard Lunan 570MF CNC Lathe for sale Used Dugard CNC lathe Ireland 2018 Dugard Lunan CNC lathe CNC lathe Ø570mm swing Large bore CNC lathe used Heavy-duty CNC turning lathe CNC lathe with 80mm spindle bore 4-position turret CNC lathe CNC lathe with tailstock and 12.5kW power supply CNC lathe for shaft turning manual turret CNC lathe industrial CNC lathe for metal turning Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: S2T238, turning diameter over cross slide: 210 mm, turning length: 1,000 mm, turning diameter: 330 mm, spindle bore: 42 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 7,500 W, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 6 m/min, feed length X-axis: 180 mm, feed length Z-axis: 1,000 mm, quill travel distance: 110 mm, quill diameter: 42 mm, quill stroke: 110 mm, swing diameter over cross slide: 210 mm, turning diameter over bed slide: 330 mm, type of input current: three-phase, swing diameter over bed slide: 330 mm, bar passage: 42 mm, spindle nose: D1-4, center height: 167 mm, bar diameter (max.): 42 mm, travel distance cross slide: 180 mm, Equipment: documentation/manual, rotational speed infinitely variable, 🔹 For Sale: 2003 Harrison Alpha 1330S CNC / Manual Lathe – 2-Axis, Fanuc Control 🔹 Make: Harrison Model: Alpha 1330S Year: 2003 Type: CNC / Manual Combination Lathe Control: Fanuc Series 21i-MB Condition: Very Good Location: Ireland 📌 Machine Overview: The Harrison Alpha 1330S is a versatile 2-axis CNC/Manual lathe, offering the perfect balance between traditional manual turning and modern CNC precision. Built in the UK and controlled via a Fanuc 21i-MB, this machine is ideal for small batch production, toolrooms, maintenance departments, and educational use. With a compact footprint and generous turning capacity, it’s a reliable and easy-to-use solution for both skilled machinists and CNC programmers. Whether you're running single parts manually or repeat jobs with CNC automation, the Alpha 1330S delivers flexibility and accuracy. ✅ Key Features: Combination CNC/manual functionality Compact, easy-to-install design Fanuc 21i-MB control – intuitive and reliable Dual spindle speed ranges for versatile applications Suitable for one-offs, training, and batch work Quickchange tool post system for rapid setups Comprehensive manuals included 🔧 Technical Specifications: Axis Configuration: 2-Axis Max Turning Diameter: 330 mm Max Turning Length: 1,000 mm Swing Over Bed: 330 mm Swing Over Cross Slide: 210 mm Height of Centres: 167 mm Spindle Bore: 42 mm Spindle Nose: D1-4 Spindle Taper: MT3 Spindle Speed Ranges: Range 1: 0 – 2,000 rpm Range 2: 0 – 3,500 rpm Main Spindle Motor: 7.5 kW Feedrate (Manual): 0.03 to 0.6 mm/rev Feedrate (CNC): Up to 5,750 mm/min Rapid Traverse: X Axis: 3,000 mm/min Z Axis: 6,000 mm/min Cross Slide Travel: 180 mm Tailstock Quill Diameter: 42 mm Tailstock Quill Travel: 110 mm Tailstock Taper: MT3 Electrical Requirements: 415V / 3-phase / 50Hz Power Supply Needed: 19 kVA 🧰 Included Accessories: Quickchange Tool Post & Tool Holders Set of Manuals 📈 Applications: General Turning Prototyping Educational Training Repair & Maintenance Work Toolroom Operations Short Batch CNC Machining Harrison Alpha 1330S for Sale CNC Manual Lathe with Fanuc Control Used CNC Lathe Ireland 2-Axis CNC Lathe for Sale Combination CNC and Manual Lathe Harrison Alpha Lathe with Fanuc 21i-MB Precision CNC Lathe for Small Batch Work Used Harrison Alpha 1330S UK / Ireland Educational CNC Lathe with Manual Option Compact CNC Lathe for Toolroom Ljdpfx Ajwtq T Ioalehd Used CNC Lathe for Sale in Ireland CNC Machinery Dublin / Cork / Galway Buy Harrison Alpha Lathe Europe Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 918106, turning diameter over cross slide: 500 mm, turning length: 560 mm, turning diameter: 420 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 600 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,260 mm, total length: 3,430 mm, total width: 1,810 mm, feed length X-axis: 230 mm, feed length Y-axis: 110 mm, feed length Z-axis: 600 mm, swing diameter over cross slide: 500 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, turning diameter over bed slide: 650 mm, workpiece weight (max.): 230 kg, turning diameter over top slide: 500 mm, type of input current: three-phase, torque: 287 Nm, overall weight: 5,800 kg, swing diameter over bed slide: 650 mm, bar passage: 65 mm, chuck outer diameter: 250 mm, center width: 560 mm, spindle nose: A2-8, bar diameter (max.): 65 mm, Equipment: rotational speed infinitely variable, 🔹 FOR SALE: 2006 Goodway GS-260MYS CNC Lathe – Very Good Condition – Ireland 🔹 Make: Goodway Model: GS-260MYS Year: 2006 Control: Fanuc Series 18i-TB Machine Type: CNC Turning Centre with Sub Spindle, Driven Tools, Y Axis & C Axis Condition: Very Good Location: Ireland Availability: Immediately available 📌 Description: For sale is a 2006 Goodway GS-260MYS CNC Lathe, a powerful multi-axis CNC turning centre equipped with live tooling, Y-axis milling, and a sub spindle. This robust machine is ideal for complex turning and milling operations in a single setup — perfect for modern precision engineering environments. Maintained in very good working condition, it includes a selection of manual and driven tool holders, 2 chucks, and a swarf conveyor. 🔧 Technical Specifications: Main Spindle: Chuck Size: 10" (250 mm) Bar Capacity: 65 mm Spindle Nose: A2-8 Max Swing: 650 mm Swing Over Saddle: 500 mm Max Turning Diameter: 420 mm Standard Turning Diameter: 205 mm Max Turning Length: 560 mm Max Part Weight: 230 kg Hole Through Drawtube: 65.5 mm Hole Through Spindle: 76 mm Spindle Drive: Direct Belt Drive Spindle Speeds: 40 – 4,000 rpm Continuous Spindle Motor: 11 kW 30-Min Spindle Motor: 15 kW Spindle Torque (Cont.): 210 Nm Spindle Torque (30 Min): 287 Nm Axes: X Axis Travel: 230 mm Z Axis Travel: 600 mm Y Axis Travel: ±55 mm X/Z Rapid Traverse: 20 m/min Z2 Axis Travel (Sub Spindle): 600 mm Z2 Rapid Traverse: 24 m/min Tooling: Turret Stations: 12 OD Tool Shank Size: 25 mm ID Tool Shank Size: Up to 40 mm Live Tooling Stations: 12 Live Tool Drive Motor: 4.5 kW Live Tool Torque: 22 Nm Sub Spindle: Chuck Size: 6" Spindle Nose: A2-5 Hole Through Spindle: 46 mm Continuous Motor Output: 5.5 kW 30-Min Motor Output: 7.5 kW Spindle Speed Range: 60 – 6,000 rpm Drive: Built-in Motor Lodpfx Aajwtpdfolehd Construction: Slideways: Hardened & Ground Box Ways Machine Dimensions: 3430 x 1810 x 2260 mm Machine Weight: 5,800 kg 🧰 Included with the Machine: Selection of Driven Tool Holders Selection of Manual Tool Holders 2x Chucks Swarf Conveyor Note: Tools shown in photos are not included – only the holders are provided. 🛠 Suitable For: Precision turning, mill-turn applications, production of complex components in aerospace, medical, automotive, and general engineering sectors. Used CNC Lathe Ireland, Goodway GS-260MYS for Sale, CNC Lathe with Y Axis and Sub Spindle, Live Tool CNC Turning Centre, CNC Turning Machine Europe, Fanuc CNC Lathe for Sale, Multi-Axis Lathe Machine Used Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 2025, condition: like new (used), functionality: fully functional, 2025 BCAMCNC 5 Axis CNC Router – Like New, Never Used For sale is a 2025 BCAMCNC 5 Axis CNC Router, installed but never put into production. This machine is in as-new condition, making it an excellent opportunity to purchase a state-of-the-art 5 axis router without the lead times or cost of a brand-new unit. The BCAMCNC 5 Axis Router is designed for high-precision machining of complex parts, ideal for industries such as aerospace, automotive, furniture, marine, signage, mould making, and advanced composites. ✅ Key Features & Benefits 5 Axis CNC machining – full simultaneous interpolation for complex 3D parts Like new – installed but never used Heavy-duty welded frame for stability and long-term accuracy High-speed spindle for efficient cutting across a wide range of materials Automatic tool changer (ATC) for maximum productivity User-friendly CNC control with advanced software integration Vacuum table for secure workpiece holding Perfect for wood, plastics, composites, foams, aluminium and non-ferrous metals 📐 Technical Specifications (2025 BCAMCNC 5 Axis CNC Router) Table Size: 3000 × 1500 mm X-Axis Travel: 3000 mm Y-Axis Travel: 1500 mm Z-Axis Travel: 1200 mm A-Axis Rotation: ±120° C-Axis Rotation: ±360° continuous Spindle: 9kW High-frequency HSD (18,000 RPM) Tool Changer: 8 position automatic tool changer (ATC) Drive System: Servo motors with helical rack & pinion on X/Y, ball screw on Z Table: Vacuum table with powerful 7.5kW pump, multi-zone clamping Control System: Syntec 610MA-ES industrial CNC controller Max Cutting Speed: Up to 25 m/min Repeat Accuracy: ±0.05 mm Lsdpfx Aexddk Sealjhd Power Supply: 380V / 50Hz 📦 Included with Machine Full extraction-ready setup Includes tooling package Documentation & manuals 🌍 Condition Installed but never used – machine is like new 2025 model – latest generation technology Available immediately – no waiting times 🔑 Summary This is a rare chance to purchase a 2025 BCAMCNC 5 Axis CNC Router in unused condition. With full 5 axis capability, a heavy-duty structure, and precision control, it is the perfect solution for companies requiring high accuracy and productivity in machining complex 3D parts. Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, MORI SEIKI TL-5 CNC LATHE MAKE MORI SEIKI, MADE IN JAPAN MODEL TL-5 YEAR 1980 RETROFITTED 2016 CONTROL FAGOR 8055 I SWING OVER BED 520.0 mm SWING OVER CARRIAGE 380.0 mm MAX MACHINING DIA 280.0 mm MAX WORK LENGTH 2000.0 mm CHUCK DIA 300.0 mm SPINDLE RANGE 17 – 2000 RPM SPINDLE NOSE A2 - 8 SPINDLE BORE 75.0 mm TURRET 8 STATIONS TAILSTOCK YES PLUS Lhedpfx Ajyuxvljaljd RETROFITTED WITH MODERN FAGOR 8055i CONTROL. 3 SPEED GEARBOX HYDRAULIC STEADY SWARF CONVEYOR COMPLETE SET OF MANUALS FULLY WORKING ORDER