Used Infeed System for sale (1,716)

Year of construction: 1993, condition: used, The REGA 6 indexer notches and prints directories onto pocket diaries, small books, or stapled/glued booklets. The machine is equipped with four processing stations and two magazines. The books are transferred from the input magazine to the processing stations and to the unloading magazine using an advancement system. Books to be notched must be manually stacked in the feed magazine. At the first processing station, a counting device and an opening finger open the book at the correct place. The index is notched in the second processing station, where each sheet is taken separately, placed on the blade, and notched. The third and fourth stations are intended for printing the directories. The use of two printing devices allows for two-color printing. Then, the book is closed and advanced to the unloading magazine to be stacked. The transport, opening, notching, printing, and stacking all occur automatically. The notched and printed books are manually unloaded from the stacking magazine. Equipped with: Infeed station Opening station Index cutting /notching station Printing station 1 Printing station 2 Delivery Various printing units/knifes etc, see pictures. Hjdpfxsxdxnfe Aacjnu Technical details: Book formats: Height: 70 - 170 mm Width: 70 - 115 mm Thickness: 1 - 15 mm Paper weight: Content: 30 - 120 g/m² Cover sheet: up to 180 g/m² Tabs Number: 1 - 40 (per book) Tab width: 15 mm Tab positions: Individually programmable, up to 40 positions Number of sheets per tab 1 - 35 sheets/tab Individually programmable for each tab Notching performance Number of notches per second: 2 - 7 tabs

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2024, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Hnodpfx Aeu Th D Rsacou Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: new, Heavy duty splicing press for producing long lengths of timber Hsdpopahmhefx Aacjnu Simple to use Top and bottom plates press simultaneously Very quick cycle time 35 tonne capacity hydraulic pack 7.5Kw motor Pneumatically operated head Maximum timber section 75 x 300mm Two hand control unit Manual eccentric side clamping Optional 2m infeed and outfeed tables

Condition: used, Year of construction: 2014, machine/vehicle number: 0101-250007, The Behringer Eisele HCS 160 MF Straight Cut Fully Automatic Metal Circular Saw is a high-quality, robust machine specifically designed for professional use and maximum cutting performance in metalworking, additionally engineered for multi-shift operations. It offers an excellent combination of power, precision, and versatility, making it particularly suitable for large production runs. The fully automatic saw comes equipped with a comprehensive material loading and unloading system. The loading magazine is positioned on the infeed side, while on the outfeed side, short pieces can be discharged from the conveyor into designated containers at three different positions using a pusher via the unloading device. Hnodpfoxl R Nkex Aacou

Condition: excellent (used), Year of construction: 2023, EXp Carton Sealer / Box Taper Hnodpfx Aow H D A Asacju Top and bottom tape heads Suitable for 28mm or 48mm wide tape Gravity infeed roller conveyor Outfeed gravity roller conveyor Outfeed gravity flexi expandable roller conveyor 230 volts power

Condition: used, Year of construction: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Hnodpfsxlzrcox Aaceu Technical Specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming Station - Schleicher P03 control system - Automatic tooling infeed and removal function - Top heater with ceramic elements and 5-zone control - Bottom heater with ceramic elements and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal crossbars for use with fixed-format frames - Lower clamping frame for frame installation from below, central clamping via electric motor - Bottom table pneumatically operated, rapid/creep speed adjustable by percentage - Upper stamp rapid/creep speed adjustable by percentage - Pre-blow automation adjustable by percentage - Pre-vacuum adjustable by percentage - De-moulding automation adjustable by percentage - Sheet sag control by light barrier with support air - Six-fold cooling fan - Large front opening for tool changes - Vacuum pump Sheet Feeding - Automatic sheet feeding system - Finishing heater in feeding area for pre-heating or final heating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustable transport width

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: MH-FJ-1AW_Vorführ, Our VOGEL MH-FJ-1AW demonstration case sealer is equipped with a side drive belt system. An infeed and outfeed table is available as an option. Hsdpfx Aoxf Dg Ajacjnu Carton formats: Length 150 - ∞ mm Width: 100 - 480 mm Height: 120 - 480 mm Technical data: Length 1,090 mm Width 890 mm Weight 180 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Hjdpju Tha Isfx Aacjnu Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 4 pieces Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredders were an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machines are in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2002, Immediately available ex location: Kaltenbach saw–drilling unit Type KBS 750 DG plus APS 1050 Year of manufacture 2002 3-axis drilling station equipped with NENOK coolant channel drills Infeed roller conveyor 16 m Outfeed roller conveyor 12.5 m Central control renewed 2 years ago Price: EUR 49,000.—plus VAT ex location Hnjdpfx Aoxn Rx Rjacju

Condition: used, Mitre Cold Circular Saw EISELE Type VMS-II-S Model No. 421 Serial No. V 2295 Year of manufacture: 1984 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (rectangular): 120 x 90 mm Saw blade diameter max.: 350 mm Blade speed: 40 - 80 rpm, 2-step Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 1.4 and 1.9 kW Power supply: 380 Volt, 50 Hz - Two cutting speed stages via two motor speeds - Manual saw carriage lowering via adjustable lever - Manual material vice, side-adjustable - Coolant system with electric coolant pump integrated in machine base - Equipped with one saw blade, approx. Ø 350 mm - Outfeed roller conveyor 750 mm with simple length stop up to 1000 mm, fixed to the machine base - Infeed roller conveyor 2350 mm with simple length stop up to 2500 mm, free-standing - Usable roller width: 180 mm Space requirement of base machine with outfeed roller conveyor (L x W x H): 1400 x 850 x 1700 mm Base machine weight: approx. 450 kg Infeed roller conveyor weight: approx. 140 kg Good condition Hnsdpfxjxk Uune Aacou

Condition: excellent (used), GARVENS S2 Checkweigher up to 300 g This Checkweigher is designed to check-weigh packages, such as cartons filled with product, against pre-set parameters. Capacity: approx 100 cartons/min Weighing range: 5 - 300 g Precision: d 0,1 g / e 0,1 g Infeed conveyor: 420 x 150 mm Discharge conveyor: 420 x 150 mm Manufacturer: Garvens Year of construction: 2006 Floor Space: 130 x 70 x 150 cm Hnsdpfx Asxl Szboacou

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Technical description: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, borehole 30 mm, Z=60 hollow roof tooth Blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Hnedpfx Aaswka Nteceu Measurement reading for: horizontal cuts: via scale and strip cutting stop vertical cuts: via scale from 0 – 1,300 mm Extraction port: 100 mm Features: - 5 material support rollers per meter of cutting length - 1 infeed and 1 outfeed roller - Pneumatic workpiece clamping device between the support rollers - 1 intermediate support element per meter of cutting length - Torsion-free, freestanding machine frame - Pneumatically retractable slatted support - Round bar guide for vertical and horizontal movement - Fine-adjustable flip stop - Fine adjustment for horizontal cuts via handwheel - Strip cutting stop - Manual programming rail with 5 T-nuts - Pneumatic plunge of the saw unit - Pneumatic saw head lock - Switch unit on the saw assembly: start button, stop button - Operator panel with template holder Including electronic digital display for the saw unit Including electronic digital display for the flip stop Incl. automatically swivelling saw head Location: Flörsheim Availability: short notice

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: MH-FJ-1AW_Vorführ, Our VOGEL MH-FJ-1AW demonstration case sealer is equipped with a side drive belt system. An infeed and outfeed table is available as an option. Carton formats: Hnedpfxexf Ddzj Aacju Length 150 - ∞ mm Width: 100 - 480 mm Height: 120 - 480 mm Technical data: Length 1,090 mm Width 890 mm Weight 180 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: Hnsdpeu Tg I Djfx Aacou The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, This is a universal dishwasher/rack conveyor machine from the manufacturer Hobart, type UXTHL 10A/SEF. Thanks to its increased loading height of 880mm, this unit is perfectly suited for washing standing bakery trays (800 x 400 mm) and, for example, for stacking and washing bakery baskets. It is extremely versatile for large dishware and particularly attractive for bakeries, butcher shops, and caterers. The automatic hood lift proves to be very advantageous, making work easier for your staff. The hood dishwasher comes with a sturdy infeed table, a new pre-rinse spray arm, a generously sized sink, and a closed underbase. The entire dishwashing unit has been completely overhauled in our in-house workshop and is sold with a 6-month warranty on all electrical components. Included in the offer is the pictured Hobart water softener, compatible with the machine. You will receive an invoice with VAT shown separately. Condition: used, overhauled, fully functional Further information: - VISIOTRONIC control: single-button operation with remaining cycle time display, combined with text and graphic display - SENSO-ACTIVE resource management: The control system continuously monitors the level of contamination in the tank and individually adjusts the rinse water consumption in real time according to the degree of soiling - POWER washing: Guarantees removal of even stubborn soiling thanks to increased wash pressure - Increased loading height - Capacity: up to 30 racks/h, 120 GN 1/1 trays/h, 90 Euronorm crates/h - 5 automatic programmes: short, standard, intensive, hygiene, and continuous cycle - Cycle duration: 120 / 240 / 360 sec and special programs - Tank volume: 130 litres - Rack size: 1240 x 700 mm - Loading height: 880 mm - Multi Setting: Heater power can be reduced when using a hot water supply on-site - Filter contamination sensor - Level indicator (detergent/rinse aid) - Hygiene program - Completely ready for connection: supply and drain hoses, power cable, detergent/rinse aid dosing pumps, rinse pump, drain pump, backflow preventer - Tank, rack, wash arms and housing made of CrNi steel 1.4301 Technical data: - Hood dishwasher (W x D x H): approx. 1447 x 936 x 1984 mm - With hood open: 2900 mm - Infeed table right: 1450 x 900 x 920 mm (sink 800 x 600 x 300 mm) - Total length machine + infeed table: 2850 mm - Power connection: V: 400 / kW: 21.6 / Hz: 50 - Year of manufacture: 2018 - Weight: approx. 500 kg - Serial number: 866414070 Our used equipment service for you: - 6 months warranty on all electrical components - High-quality branded equipment at fair prices - Professional refurbishment/inspection & expert cleaning - Tested & fully functional – or your money back - Flexible shipping or self-collection options - Expert advice – before and after your purchase - Provision of operating instructions, wiring diagrams & spare parts - Inspection in accordance with DGUV V3 Shipping: - Delivery or collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement Do you have questions, require advice, or would like to view an item on site? You can reach us by phone during our business hours: Hnsdpfx Aexhdh Eoaceu Monday-Friday 09:00 – 13:00 and 14:00 – 17:00 Sales are conducted exclusively based on our general terms and conditions (AGB).

Condition: used, Year of construction: 2010, functionality: fully functional, Well-maintained Octofrost IQF 7/2 LH tunnel freezer operating on ammonia (NH3). IQF stands for Individually Quick Freezing, specially designed for rapid freezing of small food items. This process helps to prevent ice crystal formation in the structure of products such as vegetables, berries, cheese, meat, and fish. The freezer is complete with infeed/outfeed, control panels, evaporators, and a Siemens Simatic panel control system. Of course, we can also supply other refrigeration technology, such as compressors and condensers. Please feel free to contact us for more information! Products are placed onto the infeed conveyor at a height of approximately 1560 mm. The products are then transported through the Octofrost via a vibratory belt. The belt features a drop section to separate products and remove excess external ice. The belt is approximately 8100 mm long and 850 mm wide. Once the product is frozen to the correct core temperature, it exits at a height of 1250 mm. The freezer has three inspection hatches for checking product quality while it is on the belt. The OctoFrost is equipped with two NH3 evaporators, ensuring products are frozen to the desired core temperature of -18°C. There are 7 centrifugal fans, each directly driven by an ABB M3AA 132 MB electric motor, specified as: 50 Hz - 11 kW - 1450 rpm - 630 mm diameter. These fans blow air from below through holes in the belt, preventing products from freezing onto the belt. The side panel is extendable for easy inspection and cleaning of the evaporators and fans as needed. Additionally, the Octofrost comes with the corresponding control cabinet, which features 7 ABB frequency inverters for the conveyors, 3 Key Technology MFS 268 XL frequency inverters for belt vibration, and a Siemens panel for freezer controls. The IQF tunnel freezer has the following dimensions: 8100x3000x3250 mm (LxWxH) Effective belt length: 8100 mm Effective belt width: 850 mm Infeed height: 1560 mm Outfeed height: 1250 mm Tunnel freezer performance specifications: Hodpfx Aexgcvxoacsnu Product: Green peas Capacity: 3,600 kg/h Infeed temperature: +10°C Outfeed temperature: -18°C Evaporation temperature: -40°C Product: Cauliflower Capacity: 2,520 kg/h Infeed temperature: +10°C Outfeed temperature: -18°C Evaporation temperature: -40°C Piece size: 25 to 40 mm Product: Tomatoes Capacity: 1,440 kg/h Infeed temperature: +10°C Outfeed temperature: -18°C Evaporation temperature: -40°C Piece size: approx. 30 mm Product: Strawberries Capacity: 2,520 kg/h Infeed temperature: +10°C Outfeed temperature: -18°C Evaporation temperature: -40°C Piece size: 25 to 35 mm Product: Potatoes Capacity: 1,800 kg/h Infeed temperature: +10°C Outfeed temperature: -18°C Evaporation temperature: -40°C Piece size: approx. 25 mm Product: Meat Capacity: 2,340 kg/h Infeed temperature: -3°C Outfeed temperature: -18°C Evaporation temperature: -40°C Piece size: 20 mm cubes Do you want more information or have any questions? Feel free to contact us—we are happy to assist you! *Why choose HOS BV? We are not only the largest specialist in used refrigeration technology in Europe, but we only deliver after thorough testing and industrial cleaning. If desired, we can also handle your logistics.

Condition: used, Year of construction: 1998, Working width: 510 mm Cutterhead: strip knives Number of knives: 4 Jointer table length: 2250 mm Jointer fence angle adjustable: yes Lifting of jointer tables: manual Maximum thicknesser pass-through height: 220 mm Hedpoxnhpaofx Aacenu Thickness table height adjustment: handwheel Planing thickness display: mechanical counter Feed speed: 4 / 6.5 / 10 / 16 m/min Infeed roller: steel Outfeed roller: steel Pressure bar: continuous Table rollers: no Motor power: 5.5 kW Motor brake: yes Extraction connection: 120 mm Machine length: 2250 mm Machine width: 1100 mm Weight: 800 kg

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Machine number: 133 Machine has been completely overhauled New Glue Jet 301 gluing system (top section, 1 mm) All units inspected All cutters re-sharpened All knives replaced - Electrical system for stepless feed, 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode Hnjdpfowka Iisx Aacsu - Infeed fence 1350 mm, motorized adjustment - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 jointing cutters for trimming panel edges - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit 1801 / 1802 - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit 1801 / 1802 - Edge feed 1901 fully automatic - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - Granulate supply hopper - Pressure unit 1913 MOT - Pneumatic end trimming unit 1918 (60 mm) - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW) - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profiling unit 1833 MOT4 - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2 - HW reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1,400 rpm) Availability: short-term Location: Flörsheim

Year of construction: 2018, condition: good (used), Belshaw Mark VI Automatic donut fryer Serial: 22682 2018, 4 wide automatic fryer for donuts, 1000+ donuts per hour, adjustable speed, timer and temp controls, with infeed conveyor, 1Ph Hsdpfxjqnvyys Aaconu

Condition: excellent (used), Year of construction: 2013, Type: OptiDipper 650 Serial number: 87 Year of construction: 2013 Hnjdpfoxc Ncdex Aacsu Belt width: 650 mm Product height: max 50 mm Filling: min 40 L Infeed conveyor length: 600 mm Outfeed conveyor length: 950 mm Power: 3 x 400V, 50Hz, 1.8kW Dimensions: 3850 x 1400 x 1350 mm Weight: 850 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 11/2027, Baguette - long roller Model: UNIC with 3 rollers Capacity: min 50 - 1200 g max (depending on the type of dough) Unrolling width: up to max. 750 mm stainless steel design, Connection: 400V, 1.1 kW, 16A-CEE plug Dimensions: 966 x 855 x 714 mm, WxDxH NEW machine with 24 months warranty Option: base infeed conveyor discharge tours Discharge belt with drive feed guides Visit our large bakery machine park! Hodpfohwzkcex Aacsnu

Year of construction: 2021, condition: used, Configuration: · upright transport | single-lane · manual format adjustment · infeed · 90° curve · intermediate section · 90° curve · Exit Technical specifications: Total width: 4.300 mm Hnsdpoxc I A Ajfx Aacou

Condition: used, Year of construction: 1992, working width: 630 mm maximum workpiece thickness: 230 mm cutter head: Leitz - Centrofix number of blades: 4 height adjustment: elektrisch read out thickness: Digitalanzeige feed speed: 7 / 14 m/min infeed roller: Stahl outfeed roller: 2 x Gummi table roller: nein motor power: 7,5 kW suction connection: 160mm machine length: 1200mm Hnsdpfx Aaoxnhpyscou machine width: 1100 mm weight: 1000kg

Condition: good (used), Year of construction: 1985, functionality: fully functional, ELB - SWN 5 VA II Surface Grinding Machine Hedpfxexn Szye Aacjnu - Grinding area X/Y/Z: 525x375x255 mm - Magnetic chuck: 700x300 mm - Table clamping surface: 900x250 mm - Table longitudinal travel: 10-625 mm - Max. table load: 280 kg - Table feed: 1-30 m/min - Reciprocating grinding: 3-30 m/min - Distance, table to spindle center: 525 mm - Vertical feed speed: 2-180 mm/min - Adjustable infeed: 0.001-2 mm - Grinding wheel speed: 3000 rpm - Coolant system - Machine feet - Documentation - COMPLETE TECHNICAL DATA SEE PHOTOS Dimensions: LxWxH 2.7x2.2x2 m / Weight 3500 kg Subject to errors and input mistakes.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 11/2027, Baguette - long roller Model: Ultima with 3 rollers Capacity: min 50 - 1200 g max (depending on the type of dough) Unrolling width: up to max. 750 mm stainless steel design, Connection: 400V, 1.1 kW, 16A-CEE plug Dimensions: 966 x 855 x 714 mm, WxDxH NEW machine with 24 months warranty Option: base speed controller infeed conveyor discharge tours Hnodpfx Aehwzkgeacju Discharge belt with drive feed guides Visit our large bakery machine park!