Used Induction Heating for sale (15,647)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: Hodszp Rmqjpfx Akijw - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: used, Year of construction: 2009, functionality: unexamined, power: 196 kW (266.49 HP), total height: 2,570 mm, total length: 3,500 mm, total width: 1,200 mm, 2G / WEIER Gas CHP – Engine/Generator Set Gas-powered combined heat and power plant from 2G. The unit is housed in a soundproof enclosure and features a gas control system, heating and engine circuits, and a heat exchanger. Unit/Engine: WEIER Type: GEN.DASGM 250/4L Year of manufacture: 2009 Hodezzbhpjpfx Akisw Voltage: 400 V Frequency: 50 Hz Rated current: 400 A Power: 196.0 kW Speed: 1,514 rpm Power factor: cos φ 0.86 Protection class: IP54 Insulation class: F Max. ambient temperature: 70 °C Max. operating pressure: 6 bar Marking: CE / EN 60034/05 Ignition system: Manufacturer: Altronic Inc. Type: CD200 – Programmable Ignition P/N: 791070-6 S/N: 3218 Supply: 12–24 V DC Max. ambient temperature: 105 °C Location: Neuenkirchen-Vörden, Germany An inspection of the unit is possible after prior arrangement. If you are interested or have any technical questions, please feel free to send us an inquiry. We will provide you with further information and documents upon request.

Condition: used, Year of construction: 2011, functionality: fully functional, nominal heat output: 850 kW (1,155.68 HP), tank capacity: 7,350 l, Equipment: documentation/manual, hot water, type plate available, Hot water boiler system Polzenith 850 kW – Year of manufacture 2011 – fully functional For sale is a hot water boiler system from the manufacturer Polzenith, manufactured in 2011. The system is currently in operation and fully functional. It will be available from mid-2027. Technical data • Manufacturer: Polzenith • System type: Hot water boiler system • Machine type: 05.617 • Year of manufacture: 2011 • Rated thermal output: 850 kW (more depending on the fuel) • Water volume: 7,350 liters • Special function: LUVO 3 (oxygen control via lambda sensor) • Electrical connection power: 55 kW / 125 A • Electrical rated power: 58 kW / 120 A • Electrical documentation: available • Operating condition: fully functional, currently in operation • Overall condition: The system is in used condition, appropriate for its age. • Expected availability: from mid-2027 Hodpfx Ako Aaz Eceisw Scope of offer The following system components are included in the offer: • Hot water boiler • Chimney • Ash auger & scraper (without container) • Fuel feed system • Fuel bunker with four hydraulic slides • Pressure maintenance • Automatic make-up water supply Not included in the offer • External water storage tank • Dismantling of the system and all components • Transport and delivery Dismantling and collection The dismantling of all components will be carried out on site by the buyer. The handover of the system is expected to be possible from mid-2027 after prior coordination. Inspection and contact An inspection of the system is possible after prior appointment arrangement, as long as it is still in operation. If you are interested or have any questions, please do not hesitate to contact us.

Condition: excellent (used), For sale is an industrial gas burner, Weishaupt WM-G10/3-A monarch®, in ZM design, complete with DUNGS gas fittings and accessories as shown in the pictures. With a thermal output of 100–1000 kW, this burner is suitable for installations requiring high performance, such as industrial boiler rooms, heating and process boilers, after selecting the burner according to the equipment's parameters. A key advantage of this offer is the extensive range of included equipment: in addition to the burner, you also receive a double gas valve DUNGS DN65, a pressure regulator, flange components, and a Weishaupt control panel. The entire set is sold in the configuration shown in the photographs. Burner data from the nameplate: Manufacturer: Max Weishaupt GmbH Series: monarch® Model: WM-G10/3-A Design: ZM Year of manufacture: 2010 Serial number: 5970155 Type of gas indicated on the nameplate: N Thermal output range: 100–1000 kW Gas connection pressure range: 15–500 mbar NOx class: 2 Main power supply: 400 V, 3~, N, PE, 50 Hz Control voltage: 230 V, 1~, 50 Hz Electrical power: 1.86 kW Protection class: IP54 Country of manufacture: Germany CE marking: CE-0085BQ0027 Fittings and equipment shown in the pictures: Double gas valve DUNGS DMV 5065/12 Hedpjz Spgpjfx Akisw Nominal valve diameter: DN65 Maximum valve pressure: 500 mbar Valve catalog number: 245099 Valve marking: class A, group 2, EN161 Gas pressure regulator Presostat DUNGS GW 50 A2 Weishaupt / Berger Lahr STE 50 actuator, 24 V DC power supply Weishaupt control panel with display Manometer Tubular elements, flanges, connectors, and wiring shown in the pictures Condition and scope of sale: The unit has visible signs of use, dirt, and localized corrosion on the steel components. The pictures show the actual item offered and serve as the basis for determining the scope of delivery. This offer includes the burner together with the shown accessories. Selection for a specific boiler, installation, and adjustment should be entrusted to a gas burner service company.

Condition: excellent (used), For sale: an industrial gas burner, Weishaupt WM-G10/3-A monarch®, ZM version, from 2011, complete with DUNGS gas valves and accessories as shown in the photos. The burner’s thermal power range is 100–1000 kW, and its German manufacture and extensive valve set are the key advantages of this offer. This burner is suitable for industrial boiler rooms, as well as heating and process installations – after being adapted to the boiler and gas installation parameters. The offer includes not only the burner but also a double gas valve, a pressure regulator, a gas filter, pressure switches, and connecting elements. The exact scope of the sale is visible in the photographs. Burner technical data – according to the nameplate: Manufacturer: Max Weishaupt GmbH Series: monarch® Model: WM-G10/3-A Version: ZM Year of manufacture: 2011 Factory number: 40018116 Gas type – designation on the nameplate: N Thermal power: 100–1000 kW Gas connection pressure: 15–500 mbar NOx class: 2 Main power supply: 400 V, 3~, N, PE, 50 Hz Control voltage: 230 V, 1~, 50 Hz Electrical power: 1.86 kW Protection class: IP54 Designation: CE-0085BQ0027 Country of manufacture: Germany Gas valves and accessories: DUNGS DMV 525/12 double gas valve Maximum pressure: 500 mbar Class: A, group 2 Standard indicated on the nameplate: EN 161 DUNGS catalog number: 255248 DUNGS FRS 520 gas pressure regulator Maximum inlet pressure: 500 mbar Output pressure range indicated on the label: 5–20 mbar DUNGS catalog number: 223382 Weishaupt article number: 640679 Weishaupt 520/1 gas filter Connection: 2″ Maximum working pressure: 0.5 bar Designation: CE-0085AS0538 Other equipment visible in the photos: DUNGS GW 50 A5/1 gas pressure switches Pressure switch mounted on the burner Pressure gauge Control actuator Burner head assembly with electrodes and cables Pipe elements, elbows, flanges, and fittings Wiring and connecting plugs Hodpfx Akez Spgvsijw Condition and scope of delivery: Used burner, with visible signs of use and storage. The elements have some dirt and localized corrosion marks. The photos show the actual item being offered.

Condition: good (used), Year of construction: 1997, functionality: fully functional, We are offering a boiler from the renowned company Urbas. The boiler has a heating output of 500 kW. Type: UR-RR-500. The boiler burns biomass (Bark, wood chips, and sawdust). Year of manufacture: 1997 Wiring, complete valve and pump set included. Multicyclone. Excellent technical condition. Optionally, for an additional fee, the boiler is available with a movable floor and chimney. Hedpszvxv Tefx Akiow

Condition: like new (used), Year of construction: 2013, For sale is a functioning and very well-maintained gas burner from the Weishaupt brand, including gas piping (Dungs DN 80). 1. Burner type: WM-G30 Output: 600-5700 kW Design: ZM Year of manufacture: 2013 Hedpfjzamd Usx Akijw Connection pressure: 15-500 mbar

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: WL-01990-21, Industrial heater for oil & gas, 19,000 m3 per hour. Consumption: 302 kW. The burner is a Riello burner, and the gas valve unit is from DUNGS. In new condition. Hedjzyubyopfx Akiow

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 13276/1694, type of input current: three-phase, total height: 2,500 mm, total width: 3,000 mm, total length: 5,000 mm, input voltage: 380 V, control voltage: 24 V, input current: 250 A, input frequency: 50 Hz, Equipment: documentation/manual, Inductotherm 150 kW induction furnace; comes with 3 new crucibles. Aluminum capacity: 60 kg, melting time: 30 min. Bronze capacity: 200 kg, melting time: 60 min. Hodpfx Akezfif Rsiow

Condition: used, pressure: 5.5 bar, input voltage: 230 V, nominal heat output: 380.2 kW (516.93 HP), heating capacity: 373.8 kW (508.23 HP), temperature: 110 °C, tank capacity: 680 l, input frequency: 50 Hz, operating pressure: 5 bar, We are offering this used Buderus Centra 1740 B2 heating and fan unit, year of manufacture unknown, for sale. Maximum firing heat output Qn (H): 373.8 kW Nominal heat output Pn 50/30 °C gas: 366.0 kW Hodpfx Asz Eiwdjkiow Nominal heat output Pn 80/60 °C gas: 380.2 kW Nominal heat output Pn 50/30 °C oil: 364.8 kW Nominal heat output Pn 80/60 °C oil: 364.8 kW Operating pressure pMS: 5.5 bar Test pressure PT: 7.9 bar Maximum temperature Tmax: 110 °C Volume: 680.0 l Nominal voltage: 230 V Nominal frequency: 50 Hz Nominal current: 10.0 A If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2019, operating hours: 50 h, condition: used, functionality: limited functionality, heating capacity: 50 kW (67.98 HP), The system is designed for the automatic induction hardening of screws and bolts in sizes M8 and M10. Manufactured by Grimm Zuführtechnik, the system is capable of processing approximately 70-80 parts per minute (depending on the component) and offers various monitoring features (temperatures, component heights, component types, rotation monitoring, etc.). Parts are conveyed from a bunker belt via a steep conveyor to a linear sorter, from where they are precisely positioned and transferred into an 8-position indexing table, with two nests per station. A 50kW high-frequency generator from IDEA is connected, featuring additional monitoring functions (energy output, earth fault detection, inductor water flow and temperature monitoring, etc.). The system includes its own quench water tank, from which the parts are discharged using a magnetic conveyor belt. The parts are then demagnetized. Quench medium filtration is handled via a cartridge filter. Both the system and the generator are prepared for connection to a central cooling system. Hodpfx Akexlii Aoijw Due to the currently unconnected cooling, the system is only partially operational; however, it can be inspected by interested buyers. The system was built in 2019 and, unfortunately, has never been run continuously due to the impact of the Covid-19 pandemic and associated order cancellations. As a result, it is in like-new condition. Should you require additional photos, we also welcome you to visit and inspect the system on site.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,613 h, functionality: fully functional, machine/vehicle number: B4/19-002/LV, total height: 2,591 mm, total length: 2,990 mm, total width: 2,438 mm, fuel: liquefied natural gas (LNG), overall weight: 5,000 kg, type of cooling: water, empty load weight: 4,900 kg, Equipment: documentation/manual, As part of the demonstration, the compression in all cylinders can be shown to be 15 bar. Electrical power – 50 kWe Thermal power – 80 kW Gas consumption – 14.6 Nm3/h Engine manufacturer – MWM Hodpfez Rxgyex Akiow Number of cylinders – 4 Generator manufacturer – Marelli Type – MJB 225 SA4 Power – 62.5 kVA Rated power – 50 kW Frequency – 50 Hz Voltage – 400 V

Condition: used, Unused approximately 15 square metre vertical shell and tube heat exchanger. Unit has approximately 17.4mm diamater x 2000mm long stainless steel 316 tubes. Unit has a design pressure of 6.0 bar / full vacuum shellside and 10.0 bar / full vacuum tubeside. Unit has a design temperature of 150°c. Unit has a stainless steel 316 shell approximately 2000mm diameter x 330mm straight side. Unit has mounted side support lugs for easy usage. Unit is designed to ASME VIII standard. Specifications: Surface Area: 15 m² Material of Shell: Stainless Steel Material of Tubes: Stainless Steel Hjdpfx Asyh I Uhekisw Shell Side Max. Pressure: 6 bar Shell Side Max. Temp.: 150°C Tube Side Max. Pressure: 10 bar Tube Side Max. Temp.: 150°C Configuration [Vertical/Horizontal]: Vertical Weight: Actual: Kg550.0 Dimensions: 650 X 3000

Condition: excellent (used), Year of construction: 2018, operating hours: 123 h, power: 770 kW (1,046.91 HP), heating capacity: 810 kW (1,101.29 HP), temperature: 110 °C, Equipment: hot water, Mawera Type FFU700RIA, fully automatic wood chip heating system with underfeed stoking. Output: 810 kW. Domestic hot water system, supply temperature max. 110°C. Year of manufacture: 2018. Components: boiler body, combustion chamber and pneumatically cleaned heat exchanger, screw conveyor, automatic ash removal screw, ash separator, multi-cyclone, flue pipes for connection to the chimney, flue gas fan, operating manual, machine manual, control unit, control cabinet. It can be inspected on-site in Germany. Already dismantled; the firebox is to be relined with refractory bricks. Hsdpfx Ako Abayuoijw

Year of construction: 2021, condition: used, Alfa Laval T10 Plate Heat Exchanger Industrial Alfa Laval gasketed plate heat exchanger, suitable for efficient heat transfer in industrial process applications. Hodpfx Aoz Dix Eekijw The unit consists of a plate pack mounted in a heavy-duty Alfa Laval frame with inlet and outlet connections. Product details: Manufacturer: Alfa Laval Type: T10 Equipment: Gasketed plate heat exchanger Quantity available: 2 units Heavy-duty steel frame Removable plate pack Multiple process connections Industrial configuration Condition: Used industrial surplus Both heat exchangers are available individually or together. The units are currently installed and can be inspected prior to purchase. Location: The Netherlands This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for additional information, dimensions, or to make an offer.

Condition: used, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,320 °C, inner dimension length: 950 mm, inner dimension width: 500 mm, inner dimension height: 400 mm, overall weight: 900 kg, number of chambers: 1, Equipment: CE marking, documentation/manual, Electrically heated chamber furnace for hardening or preheating forged parts. The furnace is in excellent condition and has been used very little. Maximum temperature: 1,320°C Power: 30 kW Thermocouple: Type S with a 0.35mm diameter in the ceramic support tube Temperature control: JUMO dTron 304 controller Usable dimensions: 950 x 400 x 500 mm (length x height x width) Hsdpfx Ajz H I N Iskiew

Condition: excellent (used), Novumax H2R 625 / 600 kW heating boiler Buderus/Viessmann Hjdpfoywzx Aex Akijw

Condition: ready for operation (used), Year of construction: 2017, operating hours: 45,699 h, functionality: fully functional, machine/vehicle number: 81248168054807, power: 530 kW (720.60 HP), type of cooling: water, nominal power (apparent): 660 kVA, Equipment: documentation/manual, We are offering a used MAN E3262 LE202 combined heat and power (CHP) plant, manufactured in 2017. Hjdpfxo Agu Tij Akijw For sale is a standard-production CHP plant with an electrical output of 530 kW, designed for operation as a biogas plant or with natural gas. The plant is based on a MAN gas engine and a Leroy Somer synchronous generator. The corresponding manufacturer's data sheet is available. The unit is ready for operation and has been functioning perfectly up to the present. The entire plant is for sale, including the CHP unit, container with antechamber and switchgear cabinet, fresh and used oil tanks, plate heat exchanger, exhaust stack, exhaust gas heat exchanger, and some consumables. History & Maintenance: • Commissioning: 17.10.2017 • Major overhaul: carried out on 11.12.2025 - Replaced: cylinder heads with the latest version (M18), piston assembly including pistons, liners, connecting rods and all bearings, main cooling circuit pumps new • Last maintenance: turbocharger replacement in April 2026 - Technical data: • Plant type: CHP biogas plant 530 kW • Drive engine: MAN gas engine (internal combustion engine) • Engine number: E 3262 LE 202 • Electrical output: 530 kW • Thermal output: 559 kW • Firing heat output: 1358 kW • Power factor: 0.95 • Efficiencies: Electrical efficiency 39 % | Thermal efficiency 41 % • Heat extraction: Cooling water heat 264 kW + mixed heat HT 75 kW + exhaust gas heat up to 250°C / 220 kW Generator specifications (synchronous generator): • Manufacturer: Leroy Somer • Type: LSA 49.1 S4 C6S/4 • Rated apparent power: 660 kVA / I = 630A • Rated voltages: 400/230V • Grid connection / rated current: Star / 795 A • Protection functions (grid protection relay): AMG 2 (Leonhard/Woodward Stuttgart), including overvoltage/undervoltage protection, overfrequency/underfrequency protection, phase jump and vector jump. Complies with the BDEW guideline Chapter 2.5.3.

Condition: used, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 22 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,400 °C, inner dimension length: 400 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 1,020 mm, total width: 810 mm, total height: 1,510 mm, overall weight: 400 kg, Equipment: CE marking, 2 electrically heated chamber furnaces, manufacturer Thermconcept. Hedpfx Akozmfvneiow Type: KC 64/14 Maximum temperature: 1400 °C Internal dimensions: 400 x 400 x 400 mm (W x D x H) External dimensions: 810 x 1020 x 1510 mm (W x D x H) Volume: 64 l Power: 15.0 kW Current consumption: 22 A

Year of construction: 2024, condition: used, Manufacturer: Ziemex Processing Equipment Year: 2024 Model: Z-compact Serial number: 1403204 Type: Welded plate heat exchanger Material: 1.4404 stainless steel (316L) Fluid: Oil (circuit B) / Water (circuit A) Circuit B volume: 59 L Circuit A volume: 6 L Permissible pressure: 0 to 6 bar Permissible temperature: 0 to +200 °C (circuit B) / 0 to +110 °C (circuit A) Test pressure: 9.5 bar (circuit B) / 8.7 bar (circuit A) Fluid group L1G GR2 Heat exchange surface area: 4.2 m² Unladen weight: 142 kg Hodpfx Asz Iubmjkisw The Z-compact® welded plate heat exchanger combines the thermal efficiency of a plate heat exchanger with the mechanical robustness of a shell-and-tube heat exchanger. L'échangeur de chaleur à plaques soudées Z-compact® allie le rendement thermique d'un échangeur de chaleur à plaques à la robustesse mécanique d'un échangeur de chaleur à calandre et tubes. Under equivalent operating conditions, the Z-compact® offers better heat transfer than a conventional tube-and-shell heat exchanger. Its heat transfer surface is more efficient and its pressure drops are lower.

Condition: used, Year of construction: 2018, Wood chip boiler Schmid UTSK 550, manufactured in 2018, hot water system, output 550 kW, underfeed firing with a moving grate, including pneumatic cleaning, including infeed auger with backfire protection, including multi-cyclone separator mounted directly on the heat exchanger, including ash removal with an auger, including control system, the system is fully functional! Including electrostatic precipitator, brand Meister, matched to the system, including ash removal for the electrostatic precipitator, including control system for the electrostatic precipitator, including flue gas fan. The system is being sold due to connection to a district heating network. Dismantling can be included as part of the offer. Hedpovgf Ibefx Akiow

Condition: used, LÁNG Scraped Surface Heat Exchanger with Electric Motor Drive, Rotary Heat Exchanger, Scraper Blade Heat Exchanger, Used Equipment Manufacturer: LÁNG Engineering Works Co., Budapest, Hungary Type / Professional Term: Scraped Surface Heat Exchanger / Scraped Wall Heat Exchanger Serial No.: 11423 Year of Manufacture: 1980 Overall Dimensions (Width x Depth x Height): 2480 x 600 x 1300 mm Weight: 354 kg Heating Space / Jacket Working Pressure: 3 kp/cm² Heating Space / Jacket Testing Pressure: 4 kp/cm² Liquid Space / Process Fluid Zone Working Pressure: 5 kp/cm² Liquid Space / Process Fluid Zone Testing Pressure: 6 kp/cm² Hjde Afunuopfx Akiew Internal Structural Elements and Drive: Scraper Blade Screw / Scraper Augering Element Drive: Electric motor drive with V-belt transmission

Condition: ready for operation (used), Year of construction: 2022, operating hours: 29,570 h, functionality: fully functional, fuel: domestic gas H, type of cooling: water, input frequency: 50 Hz, Equipment: rotational speed infinitely variable, Used, containerized Jenbacher J612 GS-N.L natural gas generator set, rated at 2,002 kW, 690 V, and 50 Hz. The unit was originally manufactured in 2012 and underwent a short block replacement in 2022. A total of 29,570 operating hours have been recorded since the short block replacement. The unit includes the Stamford alternator, sound-attenuated container, auxiliary control cabinets, DIANE XT3 control system, container-mounted gas train, cooling system, and available documentation. It was shut down while operating at full load, and a running video is available. Currently stored in Spain and ready for inspection and loading. Manufacturer: Jenbacher Model: J612 GS-N.L Rated electrical output: 2,002 kW Fuel: Natural gas Speed: 1,500 rpm Hsdpo Agvawofx Akisw Frequency: 50 Hz Output voltage: 690 V Generator manufacturer: Stamford Original year of manufacture: 2012 Short block replacement: 2022

Condition: new, Year of construction: 2026, functionality: fully functional, input thermal power: 115 kW output thermal power: 93 kW heating capacity: 80,000 kcal/h Hsdpfx Aoz Rm Uxjkisw fan motor power: 1.1 kW fan capacity: 6300 m3/h fuel: solid fuel of wood origin weight: 365 kg year of manufacture: 2026, new voltage: 400 V CE marking

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, Nominal thermal capacity of 2.900.000 Kcal/h. Effective capacity on exit is 2.400.000 Kcal/h. Feeding system and container for wood chips were bought in 2012. It has in total worked for 5 years, while feeding system and container or wood chips had worked for 2 months. Hsdpfxez Sy Ris Akijw Feeding system is with screw conveyor.