Used Index B 60 for sale (135)

Condition: good (used), Year of construction: 2007, Details will be provided via email upon request. The following repairs were carried out on this machine by Index: Bljdpfxo Af Uzzo Afmsp  New collet chuck  New clamping cylinder  New part removal system  New PCU (presumably referring to a Programmable Control Unit)  New display screen  New synchronization spindle

Condition: good (used), Internal item no.: 25088 Tool holder Thread whirling holder incl. cutting inserts Index / Traub No.: 12068219 The tool was used on a Traub TNL18 Bsdoxu Dcvepfx Afmjlp Very well-maintained condition!

Condition: excellent (used), Index MS42C HBF rod guide Blodpfx Aefdr R Uefmep Oil distributor Flaps with tensioning screws

Condition: good (used), Year of construction: 2006, Number of working spindles: 6 pieces Bar spindle diameter capacity: 32 mm Working spindle maximum speed: 6000 rpm Spindle chuck diameter: 40 mm Boderqzzpepfx Afmelp Maximum number of tool carriers: 12 pieces Tool carrier travel distances: X = 72 mm, Z = 100 mm Part catcher receiver available in 6.1 position KNOLL chip conveyor In-machine air intake filtration system available (ventilation) Weight: 7,200 kg Magazine: IEMCA 3300 mm capacity bar feeder

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 1, Equipment: documentation/manual, Machine in perfect working order, primarily made of brass. IEMCA loader included. Blsdpfe Abkz Ajx Afmep

Condition: used, Year of construction: 2011, Offers considered prior to auction Bledpfjz H Uzwex Afmep Index MS32C Multi-Spindle Automatic Lathe. Serial No. 150759 (2011) with Siemens Sinumerik/Index C 200-4D Control, Imeca Sir-MS32 Bar Feed, Riedel Chiller Location: These lots are located in Barnstaple, Devon UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Forkardt 2-Jaw Chuck 1629034, Double-Jaw Chuck, Ø 160mm Index G200 Adapter, Ø140mm ZWS140-K5 Index G200 Used, as shown in the pictures, in excellent condition From warehouse stock (may have storage marks) Please refer to the pictures for further technical information. Scope of delivery as shown in the pictures. With invoice. Bodpfxozk Iy Rs Afmelp The invoice will be enclosed with the shipment.

Condition: good (used), Year of construction: 2014, See documents. Blodpfx Aozqtg Ajfmep List of individual machines with operating hours, etc. – see documents.

Year of construction: 2008, condition: ready for operation (used), Two Index CNC turning and milling centers are available. 1) Index G250, year of manufacture: 2008, swing diameter: 560mm, turning length: 800mm, bar capacity: 90mm, spindle diameter: 140mm, spindle speed: 3500rpm, spindle power: 43kW/57kW, torque: 275Nm/363Nm, indexing: 2.5°, tool speed: 6000rpm, tool drive power: 11kW, X/Z travel: 300mm/800mm, rapid traverse X: 30m/min, rapid traverse Z: 22.5m/min, feed force X/Z: 7200N/9000N, quill diameter: 65mm, machine dimensions X/Y/Z: approx. 7300mm/4000mm/2600mm, weight: approx. 14000kg, control: Siemens 840D C200-4D. 2) Index G300, year of manufacture: 1998, retrofit: 2022, turning diameter: 270mm, turning length: 710mm, max. swing diameter: 590mm, main spindle bore: 65mm, spindle diameter: 110mm, spindle speed: 5000rpm, torque: 275Nm, power: 43kW, tailstock center distance: 740mm, max. thrust force: 10kN, short slide travel X/Y: 215mm/180mm, short slide travel Z: 710mm/1250mm, feed force X/Y/Z: 8kN/16kN/13kN, rapid traverse: 20m/min, tool stations: 12. Documentation available. An on-site inspection is possible. Bedpfxjznmxmj Afmelp

Condition: used, Year of construction: 2007, Offers considered prior to auction Index MS32C Multi-Spindle Automatic Lathe. Serial No. 150551 (2007) with Siemens Sinumerik/Index C 200-4D Control, Imeca SIR-MS32/33/P Bar Feed, Riedel Chiller Location: These lots are located in Barnstaple, Devon UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Bljdpoz Ialqsfx Afmop

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 23109, CNC 6-Spindle Lathe Index MS42C Year of manufacture: 1998, Serial number 23109 Control: Index Bar loader: Index/Hydag Maximum bar diameter: 42 mm Chip conveyor and fleece filtration system: Knoll CO2 extinguishing system: Kraft & Bauer ----- Blsdpfoyzicwsx Afmop Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailor-made financing solutions that suit your needs. Whether you prefer a down payment, installment plan, or custom financing model – together we will find the right solution. Upon request, we will also handle the entire transportation logistics for you. From planning to reliable delivery, we ensure a smooth and timely process so that you don’t have to worry about a thing. 📞 Please contact us for further information or a non-binding quote. We offer you professional and personalized advice.

Condition: used, Year of construction: 2011, controller manufacturer: Siemens, controller model: C200-4D SL, _____ Description: Year of manuf. : 2011 Blsdpsy Sq T Ssfx Afmjp Control : Siemens C200-4D SL In General: Year of construction:2011 Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up

Condition: good (used), Year of construction: 2004, machine/vehicle number: 2420701, CNC multi-spindle automatic lathe, make Index, type MS52C2-1, year 2004, serial no. 160024, - robot cell, - 7 clamping devices, - 3 rigid tool holders simple, - 3 rigid tool holder multiple, - 4 powered tool holders, - Suction Büchel Handlings and assembly robot cell Stäubli Unimation incl. basket translator with basket stack for raw and finished parts, two shuttles on top of each other for supply/removal baskets, Integrated measuring station Commissioning 2021 Connected load 24 kW, control, make Index, type C200-4D (Siemens 840 D basis), - 2 steering positions, - 6 spindles, - travel X/Y 300 x 500 mm, Bodpfxslmkucs Afmjlp - bar diameter max. 52 mm, - - spindle speed max. 5000 rpm, -12 tool carriers, coolant system, - Industrial robot, make Stäubli, - programming panel, - extraction device, - settling device, - Accesories

Condition: used, Year of construction: 2015, Technical details: number of spindles: 6 spindle passage: 22 mm Bljdpoxc Idmjfx Afmep ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools! *

Condition: used, Multispindle lathe INDEX MS25E Bjdpfjz I Utiox Afmslp

Condition: used, Cnc multispindle lathe INDEX MS16C Bledpfx Asztk A Tefmep

Condition: ready for operation (used), Year of construction: 2011, operating hours: 27,865 h, bar diameter (max.): 24 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 6, This 6-axis Index MS 22 multi-spindle turning machine was manufactured in 2011. It features a Siemens Sinumerik 840D control system and includes a bar loader system with a maximum pressure of 6 bar. The machine is equipped with a Knoll coolant/filter system and various tooling attachments for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Index MS 22 machine we have for sale. Contact us for further details. - Nominal Voltage: 400 V- Rated Current (In): 99 A- Short Circuit Current (Icu): 50 kA- Peak Current (I2): 3.6 kA- Maximum Backup Fuse: 100 A- Rated Power: 64 kW- Connected Load: 67 kVA- Frequency: 50 Hz- Control Voltage: 24 VDC- Operating Hours: 124,075 h- Hydraulic Operation Hours: 61,189 h- Operating Time: 37,971 h- Production Time: 27,865 h- Control System: Siemens Sinumerik 840D powerline (Index C200-4D) with Dual NCU- Bar Loader System: IEMCA / SIR MS22 P flat loader, Type 33 (YOM: 2011, Pressure: 6 bar, Mass: 100 kg, Voltage: 400 V / 50 Hz, Current: 7 A)- Material Feeders: 1 set Ø12 with reducer tubes, 1 set Ø18 with reducer tubes, 1 set Ø24- Clamping Heads: Ø9, Ø10, Ø12 – Ø18, Ø20 – Ø22- Knoll Coolant/Filter System (YOM: 2011): 1x high-pressure pump (80 bar, 24 l/min), 1x high-pressure pump (40 bar, 55 l/min), 1x low-pressure pump (300 l/min at 4 bar)- Tooling Drive Connections: 2x electrical connections on NCU 1, 3x electrical connections on NCU 2- Tooling Attachments: 1x polygon turning device, 3x powered tool holders ER11 (i = 1:2, max speed 12,000 rpm), 1x powered tool holder VDI25 (i = 1:1, max speed 6,000 rpm)- Back-machining Unit: on slide 6.3 (with 2x powered tool holders, 1x fixed holder, i = 1:2, max speed 12,000 rpm)- Optional Equipment: Fire suppression system, Coolant mist extraction and filtration system (SH 2000-PEV-T/TR, two-stage design), Integrated ARTIS process monitoring system Technical Specification Counter Spindle Yes Bledpsz Ahy Isfx Afmep

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 800 mm, spindle motor power: 57,000 W, overall weight: 14,000 kg, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This 3-axis Index G250 horizontal turning machine was manufactured in 2008. It features a maximum swing diameter of 560 mm and a turning length of 800 mm. The machine is equipped with a Siemens 840 D control system and offers a spindle speed range of up to 3,500 rpm. If you are looking to get high-quality turning capabilities, consider the Index G250 machine we have for sale. Contact us for further details. Blodezzmdcepfx Afmep - Maximum Swing Diameter: 560 mm- Turning Length: 800 mm- Control System: C200-4D Siemens 840 D- Spindle Head: 8 DIN 55026/55021 ISO 7027/1- Bar Capacity: 90 mm- Spindle Diameter at Front Bearing: 140 mm- Drive Power – Spindle Motor (100% / 40%): 43 / 57 kW- Torque: 275 / 363 Nm- Indexing: 2.5°- C-Axis: 0.001°- Speed Range – Driven Tool Stations: ~6,000 min⁻¹- Drive Power – Driven Tool Stations: 11 kW- Torque (Driven Tools): 21.5 Nm- Rapid Traverse X/Z: 30 / 22.5 m/min- Feed Force (X): 7,200 N- Feed Force (Z): 9,000 N- Quill Diameter: 65 mm- Total Power Requirement: 51 kVA- Footprint: approx. 7.3 x 4.0 x 2.6 m- Optional Equipment: KNOLL chip conveyor system attached to the rear/side Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2012, swing diameter 560 mm turning length 800 mm control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Bodpfxjx Emp No Afmjlp Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° Number of Turrets 1 number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 40 x 63 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -z axis 800 mm rapid traverse X/Z: 30 / 22,5 m/min feed power X: 7.200 N feed power Z: 9.000 N dia. of quill 65 mm Cone SK 30 longitudinal travel 800 mm rapid traverse 10 m/min total power requirement 51 kVA weight of the machine ca. ca. 14 t dimensions of the machine ca. 7,3 x 4,0 x 2,6 m CNC Turning- and Milling Center INDEX - G 250 - Precision package for main or counter spindle - Selected spindle housing - Bearingless clamping cylinder - Precision balancing of work spindle, clamping cylinder, and collet clamping

Condition: used, Cnc multispindle lathe INDEX MS32C Blsdpjzpznlofx Afmsp

Year of construction: 2004, condition: ready for operation (used), Two identical Index CNC lathes including peripheral equipment and accessories are available. Main spindle: D90/Size 8, max. main spindle bore: 90mm, max. workpiece diameter: 340mm, max. workpiece length: 450mm, max. workpiece weight: 100kg, speed: 4200rpm, power: 35.5kW, torque: 550Nm, front bearing diameter: 140mm, clamping stroke: 32mm, clamping pressure: 80bar, travel X/Z: 1500mm/340mm, rapid traverse: 30m/min, feed force: 8kN, tool stations 1/2: 10/10, mounting plate dimensions X/Y: 300mm/490mm. Including coolant system, tool holders, clamping equipment and angle toolholders. Documentation available. An on-site inspection is possible. Expected to be available from autumn 2026. Individual sale possible. Bledpfx Aszkld Tsfmjp

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 10 - Number of turrets : 3 MAIN SPINDLE - Spindle nose : AD140 - Spindle power : 25 / 33 [kW] - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] - Max. chuck diameter : 160 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : AD140 - Spindle power : 25 / 33 [kW] - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 160 [mm] - C axis indexing precision : 0,001 [°] - Travel : 700 [mm] - Rapid traverse rate : 50 [m/min] - Spindle / counter-spindle distance : 710 [mm] UPPER LEFT TURRET - Number of positions : 14 - Number of motorized positions : 14 - X/Z stroke : 110 / 320 [mm] - Y stroke : 100 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 6,5 [kW] UPPER RIGHT TURRET - Number of positions : 14 - Number of motorized positions : 14 - X stroke : 180 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 6,5 [kW] LOWER LEFT TURRET - Number of positions : 14 - Number of motorized positions : 14 - X/Z stroke : 110 / 550 [mm] - Y stroke : 100 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 6,5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 64 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 6.618 x 1.794 [mm] - Machine height : 2.139 [mm] - Machine weight : 9.000 [kg] MACHINE HOURS - Number of hours under power : 59431 [h] - Number of spindle hours : 29663 [h] EQUIPMENT - CNC : C200-4D (SIEMENS 840D) - Interface : Ethernet / USB - 3 colors status lamp - Options : Transmit / Tracyl - Tool breakage detection - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Spindle cooling unit Bjdpfxjzz Aymo Afmjlp - Coolant through spindle : et tourelles - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : INDEX MBL capacité 3.000 [mm] - Collet chuck : 2 HAINBUCH Spanntop Kombi Axfix Ø65

Condition: used, Cnc multispindle lathe INDEX MS16C Bsdpfx Afjztk A Hemelp

Year of construction: 1998, condition: used, A CNC lathe with bar feeder is offered. Equipped with an IRCO Breuning PROFImat bar feeder and KNOLL 400 S - 1/200 chip conveyor. Control: INDEX C200-4D / Siemens SINUMERIK 840C. Condition: in need of repair, maintenance required. Hoses and guide channels of the bar feeder are defective. The emergency stop currently cannot be reset. The oil pressure/air pressure switch trips the circuit breaker. Inspection possible by appointment. Blodpfx Aez Hzdxefmop

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 6,000 rpm, bar passage: 65 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Tool turret Number of turrets: 3 Bodpjz Ibf Ejfx Afmelp Tool holder: VDI 25 W-gear Main and counter spindle Main and counter spindle speed: up to 6,000 rpm Bar diameter: 65 mm MACHINE DETAILS Coolant tank: 600 l Coolant pressure: 8 / 18 bar EQUIPMENT Gantry removal device Hainbuch HS Axzug / GS Axfix Chip conveyor Coolant tank with strainer basket Coolant pump Coolant cooling unit FMB Turbo 10-65, 3-meter bar feeder