Used Ima C 21 for sale (136)

Condition: ready for operation (used), Year of construction: 2005, Control Unit Gijdpsx D I Dvefx Admjl Additional Equipment Automatic insertion table Agregado KFA Return NC insertion system Inclined roller table as inlet section Additional stop ruler, adjustable via NC axis Agregado double 08.376 Radiator 300 lg, 2x1.5 kW Multiple profile/bevel unit Contour milling unit KFA 30 Multiple profile scraper unit This edgebander was manufactured in 2005. It is a single-sided combination machine ideal for formatting, edge gluing, and finishing panel-shaped workpieces made of wood or wood-based materials. Features include an automatic insertion table, NC insertion system, and a 12-compartment edge magazine for roll material up to 3 mm thick. It also boasts a variable feed speed of 5-25 m/min and a PC control ICOS open system. For more information about this edgebander, please reach out to us. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2004, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: 82,10,1606, Spreader for fabric pieces and automatic IMA cutting machine, in perfect working condition until December 2025. Gisdpfx Adjx Tqivemel

Condition: used, machine/vehicle number: 008266, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Gijdpjx A Hfisfx Admol Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 25 m/min Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) Automatic and accurate Panels in-feed system Mod. A1 / 15 In-feed fence, adjustable by N.C. Panels in-feed system Bar Code Reader Pre-milling Unit (vertical joint trimmers) by N.C. 08.379 (2 x Kw 4,0) Lamps to heat the workpieces side Gjdpfxjltmnle Admeil Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 12 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES HSK 25 Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,25 x 4). Free space Milling grooving unit 08.190 (Kw 4,5 x 1)

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Gluing Unit for Hot-Melt Adhesive: Single roll/strip magazine for roll material up to 3 mm and strips up to 12 mm End Trimming Unit: 2 motors, each 660 W, pneumatic swiveling 0° + 25° This IMA Combima/II/390/B/L12 was manufactured in 2010. A robust double-sided edgebander, it features a max feed width of 3,300 mm and handles workpiece thicknesses up to 60 mm. Equipped with ICOS OPEN control for precision, it supports both roll and strip edgebanding materials. Ideal for high-capacity environments requiring flexibility and reliability in edge finishing. Contact us for more information about this machine. Gedpfx Adox D I D Aomeil Application Types Edge Banding

Condition: used, machine/vehicle number: 006017, Position 1: Vertical Storage Systems IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 2: Angular Beam Panel Saws IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 3: Panel Feeding and Loading IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 4: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 5: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 6: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 7: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 8: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 9: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Gsdpfewukzhjx Admoil Position 10: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 11: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 12: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 3 / 12 Panels thickness (min/max) mm 8 / 60 Gsdpfxed Nt N Hj Admeil Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x kW 4,0) Glueing Unit (Hot Melt Glue & PUR-Glue) 283.1513 Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels) No. 1 Snipping (end-cutting) unit 08.415 (2 x kW 0,66) Rough Trimming unit 08.055 (2 x kW 1,0) Copying unit by N.C (fine and contour trimming) SKF-L (2 x kW 0,18) +(2 x kW 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.617-2 ( 2 x kW 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270° OPTIONAL: Panels in-feed system 65.152 (Sliding table, mm 500 x 500) Panels Return System "GELDMEIER" Mod. ? (code Z02009)

Condition: ready for operation (used), Year of construction: 2006, This IMA Combima Systems/I/R75/1370 edgebander was manufactured in 2006. It handles workpieces ranging from 250 to 2800 mm in length and 115 to 1300 mm in width, with thicknesses up to 40 mm. Designed for materials like chipboard and MDF, it features a hot melt adhesive applicator and a servo edge feed system. Ideal for high-quality edge banding, consider the opportunity to buy this IMA Combima Systems/I/R75/1370 edgebander. Contact us for more information about this machine. Gsdpfxox D I Hqs Admjil Application Types Edge Banding

Condition: used, machine/vehicle number: 005635, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Position 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 5: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 6: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/II/650/A/R3 Giodpewuudyefx Admol

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING AND EDGEBANDING FOR BATCH ONE Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open Feeding speed (adjustable) m/min 7-35 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed system A2 / 30 Pre-milling Unit (vertical joint trimmers) by N.C. 75.34 (2 x Kw 6,6) Glueing Unit (P.U.R. Glue + Quick Melt system) 2 - VTG 3-48 + 286.205 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 48 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 (CN horizontal positioning) Spraying Unit (for polishing liquid) Giodpfx Adjifnzdsmol Buffing unit 08.617 (Kw 0,18 x 4) No. 3 Milling grooving units by N.C. 08.190 (Kw 4,5 x 2 + Kw 6,6 x 1)

Condition: ready for operation (used), Year of construction: 1996, This edge processing line was manufactured in 1996. It features a robust double-sided edge processing line, including a gluing unit with granulate pre-melter and a 6-position roll magazine for edging material. Equipped with both flush and fine milling capabilities, it also includes a profile scraper and a buffing unit. Ideal for longitudinal and transverse processing, the IMA COMBIMA offers comprehensive functionality for advanced woodworking tasks. For more information about this woodworking machine, please reach out to us. Gedpfx Aox D R U Dodmsil Application Types Edge Banding

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6 Gedpjwuuciefx Admsil

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips/lippings max) mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 244 / 2300 ca. Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 8 - 40 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Pre-Milling unit 75.30 (Kw 6,6 x 2) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1570 + 283.205 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Fine Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (Kw 0,66 x 2) max 25 m/min Corner Rounding unit (Contour Trimming) 08.465 (Kw 0,18 x 4) max 20 m/min Buffing unit 08.617-2 (Kw 0,18 x 2) Godpfx Aofi Tkvjdmsil Free space

Condition: used, machine/vehicle number: 007514, Position 1: Roller Conveyors IMA-COMBIMA SYSTEM I Position 2: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 3: Roller Conveyors IMA-COMBIMA SYSTEM I Position 4: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 5: Roller Conveyors IMA-COMBIMA SYSTEM I Position 6: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 7: Roller Conveyors IMA-COMBIMA SYSTEM I Gsdpfxowukzns Admeil Position 8: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 9: Roller Conveyors IMA-COMBIMA SYSTEM I

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 3 Edges thickness in stips / lippings max mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 270 / mm 1300 Numerical Control /Software ICOS open Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt SIZING PART (for each side): Pre-milling Unit (vertical joint trimmers) 75.30 (Kw 6,6 x 1) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1569 + 283.205 Pressing roller (revolver) both for straight and shaped edges (softforming) mm 1.050 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Rough Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Fine Trimming unit 08.0582 (Kw 0,66 x 2) 0°-30° Gjdpsfi Tkgefx Admeil Glue scraping unit 08.50 Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: used, machine/vehicle number: 005642, undefinedPosition 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Gisdpfxewuciwo Admel undefinedPosition 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Giodpfxod Scyds Admol Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,2 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.0587 (Kw 1.0 x 2) 4 profiles Multi Function Unit (Profile contour Trimming unit) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Milling grooving unit 08.190 (1 x Kwv 4,5) CNC (90° / 180° / 270°) CNC

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 12 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Numerical Control ICOS OPEN Feeding speed (adjustable) m/min 6 - 30 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space Glueing Unit (Hot Melt Glue) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 2 Snipping (end-cutting) unit 08.42 (KW 0.66 x 2) 0°-25° Fine Trimming unit 08.055 (KW 1 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Gsdod Rcigopfx Admjil Buffing unit 08.612 Free space (to add a Grooving Milling Unit)

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Gjdpfx Aecr U Uredmsil Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30 Gsdpfx Aefi Tg Hjdmoil

Condition: excellent (used), To apply bands on edges of straight, round and shaped workpieces - Manual feeding of the workpieces - With glue tank and glue spreading roller Gijdpfx Ajhgbfaodmol - With coil/reel holding table - Min/Max thickness of the workpieces mm 16 / 40 - Edge tickness range mm 0.4 to 3 - Tiltable table 0°-45° - Total installed power KW 4 (ca.)

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 5 axis (ROBOT head) Goose-neck type Numerical Control ICOS CNC - Software IMAWOP / (OPTION IMAwinCAD) Safety cabin (enclosure) of the working head Working table with pods and rails- No. 8 Support rails LED system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates (No. 8 folds) + (No. 18 folds) Max. useful working area (X - Y - Z) mm 4300 x mm 1300 (mm 1410) x mm 350 No. 2 Working areas - Vacuum pump (capacity m3/h) 140 Separate electric and command cabinet. Total installed power (Kw) 23 WORKING GROUPS (TOP): No. 21 Independent vertical boring spindles No. 4 Independent horizontal boring spindles Godpfsfin Saox Admjil Drilling head motor-power (Kw) Kw 1,2 x 4 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 No. 1 Vertical electro-spindles ROBOT (HSK F63), motor power KW 9 Independent Z-axis with a stroke of 650 mm Axis A arranged / assembled at an angle of 90° to the C axis. Rotating range of the C-axis 420°, rotating range of the A-axis 140°

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Gsdpfjflc Uhsx Admeil Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: as good as new (ex-display), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 8 / 60 (Laser - max 44) Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed system 700.101 (mm 500 x 500) Gedpfx Adsgbug Nemeil Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) 04.0836 + 283.1518 (SERVO-MOTOR band feed) adjustable by CN Glueing Unit (Thermofusion with Laser) Laser System IMALUX Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) Linear 08.428 LKA V30/2(Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 1.0 x 2) 4 profiles Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit DUO (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Milling grooving unit 2 x 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control IMATRONIC 231 (IMAWOP) Max useful working area (without edge banding process) mm 5000 x 1630 x 100 Max useful working area (edge banding process) mm 3900 x 1450 x 60 (panel thickness) No. 8 movable rails (supports) length mm 1200 LED displaying both the axe X and axe Y position Vacuum cups (with No. 1 vacuum pump, capacity 140 m3/h) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 2 Vertical Electro-spindles HSK F63 (1 x Kw 11 + 1 x Kw 7,5) Automatic Tools Changing System, with 18 folds (places) Giedpfx Adsfbmqtsmel No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 6 Independent horizontal boring spindles (1 x Kw 3) Banding group on board - Glueing Unit (Hot Melt Glue) VT 50 Edge coils supporting unit (No. 6 reels) OPTIONALS: No. 1 Circular Saw to cut and for grooving - max diam mm 200 (90°) No. 1 Aggregate Flush-Trimming/Scraping Unit No. 1 Cross aggregate with No. 4 horizontal boring spindles