Used Ikamag Reo for sale (39)

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW Pedpfx Adjzvq Rcjzsra The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: used, Stereomicroscope, projection enlarger, microscope, projector MOTIC type SL-41 Series Year of manufacture: approx. 1995 Magnification lens W10X/20 Power supply 230 Volts, 50Hz - Table stand with power supply for reflected light - Height-adjustable objective head - Round column stand with large outreach, inclinable extension arm - Light source for incident light 12 Volts, 10 Watts Space requirement (L x W x H): 500 x 140 x 350 mm Predpoxtq Aajfx Adzsa Weight approx. 10 kg Good condition

Condition: used, SGARCAR SRL Pedjzidtwspfx Adzsra ASTRA HD9 84.52 ANDREOLI ROUND-BED DUMP TRUCK YEAR 2013 - MANUAL TRANSMISSION / RETARDER

Condition: used, SGARCAR SRL Pjdpfxozidt Ro Adzjra ASTRA HD9 84.50 ANDREOLI DUMP BODY WITH ROUND TANK MANUAL GEARBOX AND RETARDER YEAR 2015 – EURO 6

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 430 mm Bowl internal height: approx. 100 mm Sorting track width: approx. 12 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 min-1 Psdpfjzrzygsx Adzera Power connection: 230 volts, 50 Hz - Control unit REO Type Reovib RS6 439-459 for adjustable vibration speed Space required: Ø x H: 430 x 390 mm Weight: 52 kg Good condition A spiral conveyor always consists of two essential components. 1) Sorting bowl, in which the parts are aligned. 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations, thereby setting the parts in motion.

Condition: used, functionality: fully functional, empty load weight: 7,200 kg, maximum load weight: 29,600 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 10/1998, next inspection (TÜV): 08/2027, loading space volume: 26 m³, total length: 7,400 mm, total width: 2,550 mm, suspension: hydraulics, tire size: 315.80 r 22.5, color: brown, Year of construction: 1998, Equipment: ABS, Used Andreoli rock-carrying tipper semi-trailer, 26 m3 capacity, 10 tires, year 1998, adjustable hydraulic suspension, reinforced tank for transporting boulders and rocks, tilting rear tailgate, ABS, manual tarpaulin system, inspected and serviced, INTERDRIVE SRL - PARMA dealership. Pjdpfjzvy Dljx Adzera

Condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, Prsdpfx Ajpcmtzjdzsa -Manufacturer: Rexroth, hydraulic unit -Hydraulic pump: Rexroth PV7-17/10-20REO1MCO-10 -Pressure: 60 bar -Flow rate: 36 l/min- -Motor: Siemens 3 kW / 1425 rpm -Hydraulic tank: with level indicator -Pressure storage: -Individual components: see photos -Dimensions: 1160/700/H600 mm -Weight: 293 kg

Condition: used, Year of construction: 1999, High-performance Wire-O coil cutter from Renz Adjustable number of loops Adjustable speed Pedjtp Ra Ispfx Adzsra incl. various guide rails for the most common Wire-o diameters 5/8 , 7/8 , 3/4 , 3/16 etc. ..... + transport gears 2:1 and 3:1 Price plus VAT. EXW. All information without guarantee. Subject to prior sale. Dealer transaction. The sale takes place under exclusion of any warranty.

Condition: good (used), Year of construction: 2005, functionality: fully functional, working width: 1,300 mm, passage height: 2,000 mm, total length: 2,500 mm, Automatic pallet wrapping machine with automatic plastic top sheet application and film wrapping around the load. Psdsy U Iguepfx Adzsra 1350 mm powered roller conveyors, 18 meters in length, max. pallet size 2500 x 1300 mm, max. height 2000 mm.

Condition: new, SGARCAR SRL Psdpfx Adozf Iq Sjzera NEW VEHICLES AVAILABLE FOR IMMEDIATE DELIVERY

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Model / description: “MAGNUS 400 FIBER, SHIPPABLE KMAT” (Creo label) Serial: M41243 Manufactured: June 2008 Power (platesetter): 200/210/220/230/240V, 16A, 50 Hz (on the label) Prodeyxl N Iepfx Adzoa Laser safety: marked Class 1 laser product (normal for enclosed CTP systems) Max plate size: about 685 × 762 mm (around drum × along drum) Min plate size: about 300 × 228 mm Resolution: up to 3048 dpi Throughput: often listed around ~16 plates/hour (depends heavily on plate type + sensitivity and configuration) Machine size / weight: roughly 135 × 176 × 145 cm, ~750 kg The Magnus 400 Fiber system with Shippable KMAT configuration is a professional industrial imaging solution designed for high-precision production environments. This type of equipment is commonly used in the printing and graphic industry for processing and imaging printing plates with high accuracy and consistent performance. The system is built for reliable operation in industrial facilities where stable production processes and dependable equipment are essential. Machines of this type are widely used by printing houses, packaging manufacturers and companies involved in graphic production workflows. The system includes industrial electronic components such as the Hu.q CSG-86 module, manufactured in July 2006, operating at 200–240 V AC, 50/60 Hz with CE and UL certification. These components are designed for long-term operation in demanding industrial environments and ensure stable system performance. The Magnus 400 Fiber CTP system is suitable for companies that require dependable equipment for plate imaging and preparation within professional printing and industrial production environments. The machine can be inspected on site and prepared for shipment. Loading and international transport can be arranged depending on the buyer’s,

Condition: used, Used 3D Printer EOSINT M 270 low operating hours (4910) Psdpewd Ulvefx Adzjra

Condition: ready for operation (used), Kodak Thermal Imaging Head Part-Number R507-00134A Prodpfxoiy Nx Aj Adzja • 50W 630nm • 10mW 680nm

Year of construction: 2014, condition: not inspected (used), Distribution board CTP_PWR2_400 Magnus interlock board Drum drive module Output rollers Pjdpshcz Hxefx Adzjra