Used Hydraulic Shears for sale (15,307)

Condition: excellent (used), Year of construction: 2009, Josting Veneer Guillotine with Cross-Cutting Machine Prodpfxjx N A D Rj Aa Eef The machine precisely cuts veneer bundles in a straight and parallel manner. For all types of veneer, tight jointing after cutting is ensured. Technical features: ● Highest cutting quality thanks to an oscillating knife movement, pulling at an angle of approx. 20°. ● Parallel fence with motorized rapid adjustment, fine adjustment, and digital measurement display for cutting parallel widths and strips. ● The green alignment light clearly marks the cutting line. ● Alignment grooves and an angle stop on the machine table facilitate positioning of the veneers. ● The wide pressure beam presses even wavy veneers flat and level before cutting. ● The trim-cut function hydraulically adjusts the knife beam by 0.9 mm. Square cutting edges are achieved by pre- and post-cutting with pressed veneer bundles. ● Cutting veneers across the grain is possible thanks to the powerful crank drive. ● The heavy construction safely absorbs the high pressing and cutting forces. ● Precise and durable parallel guidance of machine components. ● Full utilization of the knife due to 30 mm regrinding capability. ● Low energy consumption and reduced noise levels due to intermittent drive operation. ● Safety features include light curtain interlock, two-hand operation, safety electrical control system, and rear safety guard in accordance with occupational safety regulations. ● The machine can also cut paper, foils, plastics, and other materials. Cutting length: 2800 mm Insertion height: 80 mm Parallel fence range: 20 - 570 mm Pressure beam: 2 pressure stages Knife beam: Brake motor, gearbox crank drive Parallel fence: Three-phase motor, positioning drive Electrical connection: 7.7 KW Footprint (with parallel fence): 414 x 155 cm Height: 170 cm Weight: 3500 kg Includes: KUPER QFS 850 cross-veneer guillotine for trimming veneer packs Location: ex-site customer - immediately available - System must be dismantled by the buyer

Condition: good (used), functionality: fully functional, Please email or call for further details Prodpfx Aoxw Il Tsa Ejf

Condition: good (used), Year of construction: 2000, sheet width 3100 mm Predpfex Ni D Rsx Aa Eof plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes max. 11 Hub/min cutting angle 1°15 work height max. 770 mm column arm ? mm oil volume 300 ltr. control konv. total power requirement 15.0 kW weight 11800 kg range L-W-H 4255 x 2250 x 2400 mm Features: - Robust electro-hydraulic swing pruning shears - Operation, swivels to the front left - Electro-motorized backgauge * on recirculating ball screws * Movement by push-button (forwards backwards) * including ELGO digital position indicator - Manual quick cutting gap adjustment * by eccentric (right side stand) - Machine stand with overhang - 1x long side stop, with mm scale - 2x front support arms, with mm scale - Ball rollers in the front support table - Hinged front finger guard - 1x free-moving foot switch - Rear safety device (protective grille) - 2x front emergency stop button - Operating instructions (PDF)

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press Prjdeg Azptepfx Aa Ejf -Manufacturer: AEG, hydraulic unit from Krauss Maffei KM 250-1200 B injection molding machine -Motor: Bauknecht type AJ 225 MV4 Q4 55 kW / 1460 rpm -Individual components: see images -Dimensions: 1340/650/H760 mm -Weight: 557 kg

Condition: good (used), Field of application: Construction CE mark: yes Technical condition: good Visual appearance: good Fits to following machines: CW 45 Compatible Excavators Bucket type: Excavator bucket Delivery terms: EXW Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information Psdpfx Asx A Hkrea Esrf

Condition: used, Year of construction: 1997, Price: On request Cutting bench, cutting shear Type: Hydraulic Manufacturer: Safan Type: HVR 850-8 Year: 1997 Overhauled: 2021 (also new blades) Controls: Conventional Electrical back-gauge Cutting width: 8500mm Max. thickness: 8mm Back gauge: 1000mm Motor power: 15 kW Incl. documentation Machine dimensions for transport: 9530x2750x2955mm + extra parts Machine as a 550mm Sword; you can also put this machine on blocks (see drawings). Machine weight: 55000kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: B 9329 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 15.0 Prsdpfjwng Nbox Aa Esf - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 8500 - Backgauge type: Electric - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), controller manufacturer: 2D touch, throat depth: 200 mm, operating speed: 11 mm/s, reverse speed: 80 mm/s, total length: 4,100 mm, total width: 2,320 mm, total height: 2,800 mm, power: 11 kW (14.96 HP), empty load weight: 8,500 kg, passage width: 2,050 mm, table width: 180 mm, speciale verlenging van 1000 mm voor een totale buiglengte van 3500 mm 3 assen: Y1 / Y2 / X Psdsx Enfrspfx Aa Eorf achteraanslag van 1000 mm !! lvd-gereedschap Capacity: 100 ton x 2500 mm + 1000 mm Backgauge: CNC Max stroke: 200 mm! Max distance between table -- ram: 430 mm! Locking speed: 100 mm/sec

Condition: used, Revolving briquetting press RUF type RBK 55/2500/120 S Hydraulic pellet press or briquetting press for grinding sludge, metal chips, or similar No. 70002 Year of construction 2009 Briquette diameter 120 mm Briquette length in the pre-compactor approx. 120 mm Pressing force in the pre-compactor 30 tons at 260 bar Briquette length in the main compactor approx. 80 mm Psdpfx Aashg Uz Ie Ejrf Pressing force of the main press cylinder 250 tons at 260 bar Stroke size of the main press cylinder 120 mm Pressing force of the counter-press cylinder 250 tons at 260 bar Stroke size of the counterpress cylinder 15 mm Piston diameter of the main press cylinder 350 mm Press stroke Cycle time approx. 30 sec. for grinding sludge with low residual oil content Hopper size of the screw conveyor 1000 x 600 mm Hydraulic motor power 37 kW Mains connection 400 Volt, 50 Hz, 45 kW - Revolver with 5 stations for high material throughput - Pre-compressor stage for pressing material into the turret disk - 2 opposing main press cylinders with 120 mm and 15 mm stroke - Ejection cylinder for ejecting the finished briquettes from the turret disk - Infinitely variable adjustment of the hydraulic speed for each pressing stage - was used for grinding sludge from metal processing - Material hopper as hopper with screw conveyor - the machine was completely overhauled at RUF in 2018 - a new SIEMENS Simatic touch panel was installed in 2020 - only a few operating hours after the overhaul very good condition Grinding sludge recycling - great savings through cooling lubricant recovery - Large savings in disposal costs due to the reduction in volume and weight of the grinding sludge - Grinding sludge briquettes with a low residual oil content can possibly be classified as "non-hazardous waste".

Condition: used, functionality: fully functional, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, Amada Promecam Guillotine Shear Type GPX 630 Prodoxgpqvspfx Aa Ejf For more information, please contact us BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Outer tube diameter: 168 mm -Piston rod: Ø 80 mm -Stroke: 420 mm -Piston rod mount: Ø 40 mm -Piston diameter: 140 mm -Measurement eye to eye: 770 mm retracted Pedpsb A H Rvefx Aa Esrf -Measurement eye to eye: 1190 mm extended -Quantity: 2 pieces available -Price: per piece -Weight: 75 kg

Condition: used, HYDRAULIC DOUBLE COLUMN PRESS CAMP 250 tn Double column press Pressing power 250 tn Stroke of the piston 500 mm Prjdpfx Aogr Ur Roa Ejf Table size 570 x 570 mm Distance from table to piston 600 mm Distance between uprights 570 mm Approach speed 95 mm/seg Workin speed 7.5 mm/seg Retraction speed 135 mm/ seg Engine power 30 cv

Condition: used, Year of construction: 1996, Technical details: pressure: 6,3 t throat: 170/180 mm stroke: 310 mm power capacity: 3 kW dayligth: 775 mm weight of the machine ca.: 1,5 t clamping table: 470 x 330 mm table height over floor: 800 mm C-Type Pedpfstxdmwex Aa Eerf 1 Station *

Condition: used, Year of construction: 1995, total length: 3,900 mm, total width: 2,100 mm, total height: 1,660 mm, Weight: 5.500 kg - Year: 1995 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 2050 Prodpfsx Hih Rjx Aa Esf - Drive system: Conventional - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 18.5 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 3060 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Manual - Blade gap adjustment: Motorized - Table type: Standard table - Transport dimensions: 3900mm x 2100mm x 1660mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Hydraulic Power Unit, HYTORC Hydraulic Power Pack Mobile hydraulic power unit for hydraulic torque wrenches and hydraulic drives Type: JP 10.3 - 2T-PA Year of manufacture: approx. 2010 Operating pressure: max. 700 bar Flow rate in low pressure range: approx. 6 l/min Tank capacity: approx. 5 liters Motor power: 1.5 kW Power supply: 230 Volt, 50 Hz - Manual control Pedpfxsxf Ux Aj Aa Ejrf - Hydraulic pressure adjustable manually via pressure control valve - Pressure gauge up to 1000 bar - Cable remote control - 2 high-pressure quick-release couplings (1x coupling, 1x plug), CEJN Series 115 Required space (L x W x H): 460 x 320 x 420 mm Net weight: 32 kg Good condition 2 units available, price per unit

Condition: used, functionality: fully functional, Year of construction: 1991, Equipment: documentation/manual, LVD Hydraulic Shears Type HSL40/12.7 Year 12: 1991 Pedowp Rxcopfx Aa Eorf 4 mm by 12 mm

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Integral Hydraulik, hydraulic power unit with pressure switch -Pressure: up to 30 bar -Flow rate: 6 l/min -Pressure switch: Telemecanique XMG-B140 -Hydraulic reservoir: with pressure accumulator and level indicator -Individual components: see photos Pjdpfx Aowmax Hea Eerf -Dimensions: 465/260/H510 mm -Weight: 48 kg

Condition: excellent (used), Brand: SOLING Model: SCR 125 Tipo: Automatic hydraulic shear Maximum cutting diamante: 20 mm Minimum cutting diameter: 6 mm Bar loader up to : 6500 mm Maximum cutting length: 1.000 mm Minimum cutting length : 180 mm Components Automatic bar loader Pjdshymkwepfx Aa Eorf Hydraulic cutting head Electric desk Adjustable cutting length stop Manual

Condition: used, Year of construction: 1982, Technical details: Prodpordlgijfx Aa Eef pressure: 2,5 t

Condition: used, Year of construction: 1990, total length: 3,750 mm, total width: 1,750 mm, total height: 1,750 mm, Weight: 4.500 kg - Year: 1990 - Documentation available: No Pjdpfxsw Hy Smo Aa Esrf - CE certificate present: No - Serial number: 803296 - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Backgauge depth [mm]: 850 - Transport dimensions: 3750mm x 1750mm x 1750mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1969, Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press, press machine, hydraulic punch for Schüco tools, hydraulic press, multifunctional punch, punch, universal punch, punching machine -Handover: in the current condition as viewed -Condition: Cylinder slightly leaky -Hydraulic press: Hydraulic single-column press -Pressing force: 160 tons -Stroke: 600 mm -Insertion height: 800 mm -Table size: 660 x 800 mm -Table hole: Ø 250 mm -Projection: 330 mm Prodpfxow A Rzde Aa Eef -Operation: hand lever -Dimensions: 1780/1090/H2920 mm -Weight: 8000 kg

Condition: good (used), Hydraulic press, workshop press, two-column press, oil hydraulic press -Hydraulic press: pressing force 102 t -Stroke: 220 mm -Operation: Hand lever -Hydraulic unit: VEM 5.5 kW / 325 bar -Clamping table: 1050 x 670 mm -Insertion height: 295 to 1130 mm, lockable in 8 stages via cable pull -Dimensions: 1820/950/H2580 mm Pjdpfxsxwucxo Aa Ejrf -Weight: 2500 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 60 mm -Pipe Ø outside: mm -Stroke: 443 mm -Total length retracted: 540 mm -Recording hole: Ø 45 mm -Ideal for building a hydraulic press Pjdpfx Aeb A N S Ssa Eorf -Number: 7x available -Price: per piece -Weight: 45 kg/piece

Condition: good (used), Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump Psdeg Avqcepfx Aa Esrf -Double hydraulic pump: from KHS Krauss Maffei KM 1000-5000A injection molding machine -Pump 1: Voith type IPH 6/5-125/50 300 bar -Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher 75 kW 1500 rpm -Individual components: filters/valves, see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, swivel cylinders, tilt cylinders Prjdpfsxhfvwox Aa Ejf -Manufacturer: Still, hydraulic cylinder, tilting cylinder, double-acting, stroke 50 mm -Type: 654662 -Piston rod: Ø 22 mm -Hole: Ø 17 mm -Number: 2 cylinders available Price: per piece -Dimensions: 385/68/H85 mm -Weight: 4.1 kg/pc.

Condition: good (used), 4-application chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 330 mm -Clamping force: max. 1500 daN -Thread: M16 Pedof Atptopfx Aa Esrf -Weight: 83 kg