Used Hydraulic Presses For Trimming for sale (30,431)

Condition: excellent (used), Year of construction: 2009, operating hours: 8,100 h, AMADA PROMECAM MODEL HFE 5020 50 TONS CAPACITY X 2000 year 2009 specification 7 AXIS CNC HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 50 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 Chsdozn Afvepfx Ap Djd BENDING LENGTH 2000 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 SERIAL NO.V090090 GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED year 2009 price POA specification

Condition: refurbished (used), Single-column hydraulic press (completely overhauled) PYE 250 S1M with draw cushion - Pressing force: 2500 kN - Installation height: 800 mm - Stroke: 500 mm - Speed: downwards 200 mm/s Cjdsycl Evopfx Ap Dohd - Draw cushion: 1000 kN, stroke: 200 mm - Drive: 20.5 kW - Dimensions: 3500 x 2000 x 1200 mm can be retrofitted with: - new control system, new control cabinet, light curtain (1 cycle, 2 cycles, protection), new hydraulics, - new seals - new occupational safety inspection

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1.20 mm Table size: 2.050 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum distance from mounting surface to slide: 1.350 mm Minimum shut height: 250 mm Chsdpfxoz S H U Uo Ap Ded Power requirement: 55 kW Tank capacity: 1.200 l Total weight: 55.000 kg Press height: 5.800 mm

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Chodozvfqkepfx Ap Djd Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Clamping table changed! Not an original table!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, pressing force: 5 t, operating speed: 300 mm/s, table width: 450 mm, table length: 320 mm, throat depth: 180 mm, oil tank capacity: 9 l, overall weight: 270 kg, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Chedpfxovbdpys Ap Dod Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Cedpfx Aon Awd Rjp Djhd Brand SMG Type HZPU 8000-3000/2100-S1 Year 1995 Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm

Condition: like new (used), Year of construction: 1991, input voltage: 200 V, pressing force: 3 t, operating speed: 47 mm/s, table width: 410 mm, table length: 320 mm, throat depth: 125 mm, oil tank capacity: 6 l, total length: 735 mm, total width: 505 mm, total height: 987 mm, for sale in new condition ATSUGI 3 ton Hydraulic Press Atsugi Model AP-3-M Used load range: 6-30 (kN) Stroke: 150mm Down speed: 46.7 (mm/s) Up speed 56.7 (mm/s) two-handed operation mobile workbench Operating area: Open height: 250mm open depth: 125mm table size: 410x320mm Motor specification 3 phase AC200V 4P 1.5KW two-handed operation . mobile workbench Operating oil / quantity: 6 Liter Chodpfx Aov Sd Ansp Dod Total weight (kg) 200 Body size ​ Height (mm) 987 width (mm) 505 Depth (mm) 735

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Brand : Schuler Chsdpshcnxrefx Ap Djd Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 New hydraulic presses for sale

Condition: used, Year of construction: 2001, total length: 5,650 mm, total width: 3,750 mm, total height: 7,000 mm, overall weight: 96,000 kg, EXNER EXSBRD 500ET Hydraulic Press General Data Manufacturer: Maschinenfabrik EXNER GmbH & Co. KG Type: EXSBRD 500ET Year of Manufacture: 2001 Machine No.: 10461 Technical Data Press Force: 5,000 kN / 500 t Max. Stroke Length: 1,300 mm Max. Opening: 1,800 mm Min. Opening: 500 mm Table Size: 2,550 × 2,000 mm Column Clearance: 2,570 mm Tool Data Max. Tool Dimensions: 2,200 × 1,800 mm Max. Tool Weight: 25,000 kg Speeds Working Speed: 26 / 50 mm/s Rapid Traverse Speed: 400 mm/s Additional Technical Data Overrun Distance: 97 mm Overrun Time: 158 ms Safety Distance: 252 mm Drive Power: 159 kW Chedpfx Asz Swm Iop Dod Oil Capacity: approx. 2,800 l Dimensions (LxWxH) approx.: 5650 x 3750 x 7000 mm Weight approx.: 96,000 kg Control: Siemens SIMATIC OP37 Year of construction: 2,001 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, pressure 100 t stroke 400 mm daylight longitudinal/sideways 1010 x 300 mm Motor output 4,0 kW liter capacity 11,0 l dayligth 900 mm table surface area 1010 x 560 mm feed down 4,8 mm/sec feed up 7,5 mm/sec weight of the machine ca. 0,9 t dimensions 1320 x 900 x 2450 mm High-quality hydraulic press can be operated manually or by motor. Csdpfx Aevu E Uwop Djhd Cylinders can be moved sideways. Safety valve at cylinder end position. CE marked

Condition: excellent (used), Year of construction: 2014, Hydraulic Press Bunorm 4S-500 Manufacturer: Bunorm AG Model: 4S-500 Year of Manufacture: 2014 Pressing Force: 500 kN Maximum Pressure: 225 bar Weight: 3,200 kg Electrical Connection: 3×400 V + N + PE Frequency: 50 Hz Protection: 20 A Control System: Siemens Simatic HMI Touch Safety System: SICK C4000 Light Curtain Chedpfx Apexfl Axs Ded SCOPE OF DELIVERY Includes, among others (non-exhaustive list): Hydraulic Press Bunorm 4S-500 Exact scope of delivery as shown in the photo series. The Bunorm 4S-500 hydraulic press impresses with its robust construction and a pressing force of 500 kN at a maximum pressure of 225 bar. With its solid build and a weight of 3,200 kg, the press is suitable for demanding production applications. The integrated Siemens Simatic HMI Touch control system enables precise and user-friendly operation. Thanks to the modern SICK C4000 light curtain safety system, a high level of operator protection is ensured. This machine is the ideal solution for companies that value reliability, precision, and safety. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, Year of construction: 1961, pressure 025 t table-size 450 x 500 mm Chsdpfx Apexukpco Dsd stroke 500 mm dayligth 550 mm throat 200 mm table height over floor 800 mm hole in the table 130 mm

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm Chedpfxow D Awme Ap Ded passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Chsdpfx Apsv Rwu Us Dod Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: used, Technical specifications: - nominal force: 6300 kN - slide stroke: 1000 mm - slide speed at idle stroke: 30-40 mm/s - slide speed at working stroke: 1.2-2.5 mm/s Chsdpfxo Agi Sde Ap Dod - slide speed at reversal stroke: 40-55 mm/s

Condition: used, Year of construction: 2021, Technical details: voltage: 400/50 V/Hz Chsdoy N R Hmspfx Ap Dsd air-pressure connection: - bar control: - capacity: 150 kg/h protection class: IP 20 temperature range: 0 - 40 °C sound level:

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm Chsdpfx Apeu Nfvuj Ded total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 1966, Technical details: pressure: 16 t distance between columns: 450 mm stroke: 350 mm total power requirement: 3 kW Cjdpfsz Dgczsx Ap Djhd dimensions of the machine ca.: 1,2 x 0,8 x 2,5 m

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Csdpfstrpiisx Ap Dshd Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: new, functionality: fully functional, type of input current: three-phase, Equipment: CE marking, documentation/manual, OMCN 100-ton electro-hydraulic press, Model 164/R Made in Italy DOUBLE-SPEED ELECTRO-HYDRAULIC PRESS Chodpfx Apofh R Nye Djd AUTOMATIC, COMPLETE WITH PRESSURE GAUGE Hydraulic press with rapid-action motor, pressure gauge, and double-speed hydraulic power unit achieved with a vane pump for rapid approach and return, and with an axial piston pump for the working phase. Equipped with a calibration valve and a three-position control distributor (forward, idle, return). The machine is complete with oil. Supplied with a winch for lifting the worktable. The ram is made of special steel, treated, and chrome-plated. The machine is equipped with two-hand control and synchronization as per current regulations. Complete with protective panels, rear and side. CE approval, including electromagnetic compatibility. Ram stroke: 310 mm Internal width: 1,010 mm

Condition: new, Year of construction: 2026, pressure 150 t throat 300 mm stroke 400 mm dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm ram surface 1000 x 600 mm working feed 5 - 15 mm/sec Chedpfxeyfwxts Ap Ded speed down 130 mm/sek speed up 180 mm/sek power requirement 18 kW weight of the machine ca. 12,0 t dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, Year of construction: 2026, pressure 100 t throat 250 mm stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve Cedoyfwywspfx Ap Dshd - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Csdpfx Apez A Ia Sj Djhd Pressing force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS control system with back gauge Own weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are likely lost. Weight 7300 kg (on the nameplate) Weight 8800 kg (weighed on the crane) in good condition

Condition: excellent (used), CATALOGUE NUMBER 7926 TECHNICAL DATA - working length 6200mm - working width 150mm - working height 1350mm - 12 vertical hydraulic cylinders - dimensions (L/W/H) 6580/1270/2350mm - weight approximately 4000kg ADVANTAGES - very good condition - used press - unpainted - designed for professional use Csdpfx Aps Af I Tyo Dehd Net price: 69900 PLN Net price: 16256 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Chedpfeu Nfmyex Ap Dsd Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *