Used Hydraulic Hacksaw for sale (14,197)

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Lsdpfxst Ac D Us Aalshd Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 pieces hydraulic sheet metal hold-down device - front angle fence left 1300 mm - 3 front table extensions 1300 mm - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Good condition

Condition: good (used), mileage: 680,015 km, power: 485 kW (659.42 HP), first registration: 06/2009, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro4, suspension: steel-air, Year of construction: 2009, Equipment: AdBlue, central locking, = Additional options and equipment = - Rear work lights - Front work lights - Heated mirrors - Leaf suspension - Windscreen - Cab - Pre-heating system - PTO (Power Take-Off) = Remarks = Volvo FH16.660 Globetrotter 6x4 - PTO/Hydraulics - Hub reduction - Leather MY: 22-6-2009 KM: 680,015 YV2AUJ0D29A682779 PTO and hydraulics Hub reduction 3.20 m wheelbase Leather interior Etc. = Further information = Technical information Number of cylinders: 6 Engine displacement: 16,000 cc Gross vehicle weight: 30,000 kg Transmission Transmission: I-Shift, 12-speed, automatic Axle configuration Front axle: Tyre size: 385/65R22.5; Max. axle load: 9,000 kg; Steering axle; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: leaf springs Rear axle 1: Tyre size: 315/80R22.5; Twin tyres; Max. axle load: 10,500 kg; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40%; Reduction: outboard planetary axles; Suspension: air suspension Rear axle 2: Tyre size: 315/80R22.5; Twin tyres; Max. axle load: 10,500 kg; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40%; Reduction: outboard planetary axles; Suspension: air suspension Functional Body manufacturer: Volvo Ljdpfeyhbttex Aalshd Condition Technical condition: good Visual condition: good Further information Please contact VAEX The Truck Traders for more information.

Condition: good (used), mileage: 1,307,107 km, power: 340 kW (462.27 HP), first registration: 12/2014, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,920 mm, total width: 2,550 mm, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, parking heater, = Additional options and accessories = - (Roof) spoiler - Aluminum fuel tank - Sleeper berth - Radio/CD player - Electrically adjustable side mirrors - Sun visor - Digital tachograph = Further information = Lhjdpfxsyugqqe Aalod General information Cab: single Registration number: 21-BFK-4 Technical information Number of cylinders: 6 Engine displacement: 12,902 cc Unladen weight: 8,040 kg Axle configuration Brakes: disc brakes Front axle: Tire size: 385/65 R22.5; Max. axle load: 8,000 kg; Left tire tread: 20%; Right tire tread: 20%; Suspension: leaf spring Rear axle: Tire size: 315/70 R22.5; Max. axle load: 11,500 kg; Left tire tread: 30%; Right tire tread: 30%; Suspension: air suspension Condition Technical condition: good Optical condition: good Damage: none

Condition: excellent (used), mileage: 277,422 km, power: 316 kW (429.64 HP), first registration: 06/2001, fuel type: diesel, tire size: 315/80 R22,5, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, suspension: other, total length: 6,000 mm, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2001, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, fridge, power assisted steering, = Additional options and accessories = Lodoyivuhspfx Aalshd - Tipper hydraulics - PTO - Radio/CD player - Sleeper cab - Sun visor - Pre-heating automatic system = Remarks = TRANSPORT TO ANTWERP €390 = Further information = Tyre size: 315/80 R22.5 Front axle: Steering; Suspension: Parabolic springs Rear axle: Twin wheels; Suspension: Air suspension Unladen weight: 7,720 kg Bodywork brand: ZF Technical condition: Very good Visual condition: Very good Reference number: 58

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total height: 4,600 mm, total width: 3,400 mm, total length: 1,900 mm, pressing force: 200 t, table width: 2,000 mm, table length: 1,000 mm, overall weight: 26,000 kg, die cushion stroke: 300 mm, with 60-ton draw cushion Lsdpfx Asyv A Ipjalehd Herblitz feed: Max. material width: 550 mm Max. material thickness: 6 mm Siemens control SPS7, 1500F

Condition: used, Year of construction: 1998, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm Ljdoyq Szmjpfx Aaljhd down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions

Year of construction: 1997, condition: used, functionality: fully functional, load capacity: 45,000 kg, 20/40‘ Hydraulic Spreader Condition: Ready for use and fully functional Technical Condition: very good Description: In addition to this ELME model, we have about 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Hire purchase & financing on favorable terms are always possible for us. We are also happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this CH 20-40. P.S.: Our master forklift workshop specializes in repair, restoration, overhaul, and custom-built forklifts from 8 tons upwards. We are also happy to put your vehicle on sale for you on commission at our place. Ljdpfx Aaswpm E Soljhd

Condition: excellent (used), Year of construction: 2007, Technical specifications: Max. cutting width: 4050 mm Max. cutting capacity for steel (ST40): 8.0 mm Max. cutting capacity for stainless steel: 6.0 mm Max. cutting capacity for aluminium: 8.0 mm Lhedoywd Ndspfx Aalod Motorized adjustable backgauge: 1000 mm Cutting gap adjustment Cutting angle adjustment: 2.2° Sheet support device Motor power: 15 kW Dimensions (L x W x H): approx. 4800 x 2200 x 2150 mm Weight: approx. 11.5 tons The seller is not liable for typographical or data transmission errors. The machine is in condition, technically and visually, corresponding to its age; used machines are sold without any warranty.

Condition: like new (used), functionality: fully functional, control type: manual, actuation type: hydraulic, roller (bottom) diameter: 255 mm, roller (top) diameter: 255 mm, roller diameter: 255 mm, roller length: 2,500 mm, sheet thickness (max.): 17 mm, power: 5.5 kW (7.48 HP), input voltage: 380 V, Dear Sir, We can offer you a ROUNDO (Sweden) electro-hydraulic plate roller Model: PS-255 Prebending capacity: 2500 x 8 mm Bending capacity (diameter 3 x top roll dia.): 2500 x 14 mm Bending capacity (diameter 5 x top roll dia.): 2500 x 15 mm Bending capacity (diameter 3–5 meter): 2500 x 17 mm Machine no.: 976504 Delivered: 04-1997 Dimensions: 4 x 1.18 x 1.4 m Net/Gross weight: 6200 / 6800 kg Diameter of all rolls: Ø 255 mm Motor power: 5.5 kW Hydraulic machine 3 driven rolls Including: Push button control Digital readout (DRO) Dutch manual Price of the ROUNDO hydraulic plate roller, model PS-255: on request by e-mail This offer remains valid as long as the machine is unsold. The machine has original paint and has seen very little use. Offer is valid subject to prior sale. You can find other machines on our website. We are happy to provide additional information or answer any questions. If you would like to inspect the machines, please schedule an appointment, as we are frequently visiting customers. Delivery terms: Delivery time: from stock Delivery: ex works Baarle-Nassau Payment: prior to collection Prices are net, excluding VAT. Machinehandel De Leeuw BV is one of the few companies in Europe specialising in stocking and selling mainly used Kardex Remstar automatic lift and rotary storage systems. We have been assembling and/or dismantling these systems safely with VCA-certified technicians for over 33 years. Lhjdpeyt Hqnefx Aalod Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse Lodpfxoyupulj Aalshd - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Year of construction: 2008, sheet width 3050 mm plate thickness 12 mm rear stop 1000 mm cutting angle 0,5 - 3,0 ° down holder 18 Stk no. of strokes 7 - 14 Hub/min oil volume 350 l total power requirement 22,5 kW dimensions of the machine ca. 4200 x 2000 x 2250 mm weight 8500 kg Equipment: - Haco SP 8 control unit - electro-hydraulic guillotine shears - "guided by a guide rail" - electric backgauge - electric cutting gap adjustment - electric cutting angle adjustment - 1x side stop Lsdpfxjypv Uze Aalohd - front finger guard - rear safety device ( light barrier ) - emergency stop device - 1x freely movable foot switch - operating instructions

Condition: used, Year of construction: 2005, serial number 1106479 400 Lhodpfoyn R Nqox Aaled miter ja cooling ja

Year of construction: 2018, operating hours: 3,550 h, condition: good (used), fuel type: diesel, Kubota RTVX900 UTV Gator 4X4 Diesel with hydraulic tipper bed, 2018, 3550 hours Video available via WhatsApp. Ongoing stock, see website. Prices ex Nuland. Van de Wert Trading B.V. offers a changing inventory of machines, trucks, trailers and attachments. Ledoyt Nr Uspfx Aaljhd All our supplies are at trade prices and sold AS-IS without any guarantees. (see our general terms and conditions) For a viewing and/or test drive, you can schedule a non-binding appointment. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 1977, sheet width 3050 mm plate thickness 6 mm weight 7.000 kg Lhsdpfxjyv Nzce Aalod range L-W-H 3450x2200x1750 mm Equipment/accessories: - adjustable support table - Sheet support - angle stop - Sheet support arms - foot switch

Condition: used, Year of construction: 1990, sheet width 2500 mm plate thickness 4 mm cutting angle 1,49 ° 40-80 column arm 200 mm Number of hold downs 13 Stück back stop - adjustable 5-1000 mm table height 750 mm oil volume 85 l air pressure - required 5 bar Lodpfjyv Nx Iex Aaljhd range L-W-H 3100x1900x1500 mm weight of the machine ca. 3.600 kg Accessories: -Control RAS Multicut 2000 -Sheet metal holding device -Foot switch -Angle stop -Sheet metal support arms -Side protective grilles

Condition: new, pressure 20 t stroke 150 mm dayligth 700 mm 500 mm 195 mm weight of the machine ca. 200 kg Overall size 670x870x1900 mm Domestic equipments: - Stable welded construction - manually via hand lever Lhedpfxjyv Nuve Aalod - Pressure gauge via pressure gauge - CE mark

Condition: new, sheet width 1350 mm 3 mm sheet thickness for stainless steel 1,5 mm rear stop 600 mm total power requirement 3 kW weight of the machine ca. 1150 kg dimensions 2030 x 1940 x 1220 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale Ljdpfjyv Nt Sjx Aaljhd - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity

Condition: used, 60 to stroke 400 mm dayligth 900 mm 825 mm 295 mm Heads 150x95 mm feed up 5,6 mm/sec feed down 9,4 mm/sec total power requirement 4 kW weight of the machine ca. 700 kg Lhjdpfx Aeyv Nm Sjalsd Overall size 1460x850x2400 mm Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark

Condition: used, Year of construction: 1971, sheet width 2550 mm plate thickness 3,5 mm Lsdpfx Aasyv Nmxoljhd range L-W-H 3200x1300x1400 mm weight of the machine ca. 3.000 kg

Condition: new, pressure 200 t stroke 400 mm cylinder diameter 170 mm work height max. 900 mm Front light range 1330 mm Lateral light range 450 mm total power requirement 7,5 kW weight of the machine ca. 2600 kg dimensions of the machine ca. 2500x1100x2800 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder Ljdsyv Nd Dspfx Aalshd - CE mark

Condition: new, pressure 160 t stroke 400 mm 1100 mm 350 mm feed down 6,2 mm/sec feed up 9,8 mm/sec total power requirement 6 kW weight of the machine ca. 1.300 kg dimensions of the machine ca. 1640x1000x2550 mm Accessories / equipment: - stable welded construction Lhsdpfx Asyv Ndqsaled - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark

Condition: new, pressure 80 t stroke 400 mm 930 mm 295 mm total power requirement 4,0 kW 7,4 mm/s 11,5 mm/s Heads 160x95 mm weight of the machine ca. 725 kg dimensions of the machine ca. 1560x850x2400 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable Lodpfxoyv Nbcj Aalshd - CE mark

Condition: used, Year of construction: 1994, sheet width 4000 mm plate thickness 6 mm distance between columns 4010 mm Ljdpfeyv Nncex Aalshd machine weight ab. 7.500 kg total power requirement 16 kW rear stop 700

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? Lsdpfx Aajfxyh Rslehd :1200 ? :1200 ?

Condition: excellent (used), mileage: 1,028,872 km, power: 331 kW (450.03 HP), first registration: 05/2014, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 5,900 mm, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2014, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, fridge, power assisted steering, retarder, spoiler, = Additional options and accessories = - Roof spoiler - Tipper hydraulics - Air horn - PTO - Radio/CD player - Sleeper cab - Side skirts - Sun visor - Pre-heating automatic system = Notes = TRANSPORT TO ANTWERP 390 EURO = Further information = Front axle: Tyre size: 385/65 R22.5; Steered; Suspension: parabolic suspension Rear axle: Tyre size: 315/80 R22.5; Twin tyres; Suspension: air suspension Lsdpfjyt I Rpox Aalehd Unladen weight: 7,932 kg Technical condition: very good Visual condition: very good Reference number: 65