Used Hydraulic Cold Press for sale (25,388)

Condition: used, Double-column hydraulic press NEFF Type RHS 125 Z Hydraulic drawing press Machine No. 3973 Year of manufacture 1983 Pressing force: 125 tons Column gap: 1050 mm Lateral column clearance: 550 mm Table size: 1000 x 800 mm Ram size: 1000 x 800 mm Ram stroke: 350 mm Installation height max.: 750 mm Table height above floor: 960 mm Blankholder force: approx. 12 tons at 105 bar Blankholder stroke: 100 mm Lhodjguvtlspfx Aaljd Through-hole in table: Ø 202 mm Rapid advance speed downwards: approx. 360 mm/sec Rapid advance speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Oil tank capacity: approx. 1000 liters Main pump motor power: 22 kW Control pump motor power: 4 kW Control pump motor power: 2.2 kW Electrical connection: 400 Volt, 50 Hz - Hydraulic blankholder cushion underneath the table with a through-bore in the table top Ø 202 mm - Precise 4-column guide on the ram corners - Infinitely variable pressing force adjustment - Electrically adjustable fixed stop via hydraulic motor - Cutting shock damping - Two-hand control panel for stroke release on the press - Free-standing control cabinet (1600 x 500 mm) - Documentation such as operating instructions, electrical wiring diagram, and PLC program printout available Required space L x W x H: 2600 x 2400 x 4270 mm Weight: approx. 14 tons Good condition

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) Lsdpfodzqptjx Aalshd - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: Ledsw A Amrepfx Aalohd - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine Lhsdpfx Ajh Uhqyjalsd - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control Lodohrakvopfx Aalehd - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Lhsdpfx Aaerzfh Holod Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Lhodpfx Aor I E Itoaljd Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Lhjdpfx Aaodzp Trjlod Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Lhsdpjdzp Tcofx Aaled Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Spreader and pressing device with WEBER hydraulic unit Type E45 / 59600.0 High-pressure unit + hydraulic spreading tongs, hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic unit Type E45 / 59600.0 Max. operating pressure: 630 bar Delivery rate: approx. 2 l/min Tank capacity: approx. 10 liters Spreader device – tongs WEBER Type SP30 / 59 198.0 Lhjdpfx Ajdzp S Roalod Reach = arm length: 340 mm Spreading distance max.: 610 mm Spreading force in working range max.: 132 kN Closing force: 99 kN - Double hose with quick coupling Nominal power: 0.9 kW Power connection: 220 Volts, 50 Hz Weight hydraulic unit: approx. 40 kg Weight spreader device: approx. 25 kg Very good condition Hydraulic fire brigade rescue set with hydraulic power unit and spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart. Also suitable for compressing or lifting loads. Versatile in use due to the multifunctionally designed spreader jaws made of drop-forged and hardened steel.

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec Ljdpsyif Nrefx Aalohd rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Year of construction: 2018, condition: ready for operation (used), This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information. Application Types Bending Lodox D Rlispfx Aaljhd

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit. Ledpfjxmr Rxjx Aalehd

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue feeders. Technical data: -max.pressure 500T/ adjustable/ -max. batch height 1300mm -max. charge size 1300x2500 -press dimension 3600x1370x4500 mm -Press position ~500mm below floor level Ljdpfx Astutwvoaljhd -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max.power 13,2 kW -CE mark

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Hydraulic frame press Lsdpsxmr Spjfx Aaljhd The machine is complete and fully operational Working range 3000 x 2000 mm

Condition: excellent (used), functionality: fully functional, installation height: 500 mm, pressing force: 120 t, table width: 600 mm, table length: 1,000 mm, operating speed: 59 mm/s, overall weight: 6,000 kg, reverse speed: 180 mm/s, distance table to ram: 800 mm, clearance between the columns: 850 mm, stroke length: 300 mm, operating pressure: 290 bar, pressing speed: 11 mm/s, Used hydraulic press (120t) in good and fully functional condition with modern electrical system. The press is mounted on rollers, allowing for flexible use as a mobile unit. Ljdpfx Ajylk Eaoalehd

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, bending force (max.): 230 t, throat depth: 300 mm, distance between stands: 4,050 mm, back gauge: 600 mm, working length: 5,000 mm, TECHNICAL DETAILS Pressing force: 230 t Bending length: 5,000 mm Distance between uprights: 4,050 mm Installation height: 800 mm Ram stroke: 500 mm Throat depth: 300 mm Backgauge: 600 mm Control: BC 45 Graphic MACHINE DETAILS Total power requirement: 18.7 kW Lhedeyg D Abepfx Aaljd Machine weight: approx. 22.0 t Space required: approx. 6.0 x 2.2 x 3.75 m EQUIPMENT 4 backgauge fingers Crowning device Manual finger height adjustment via crank 140 mm Front groove in the table Various tools

Condition: ready for operation (used), functionality: fully functional, bending force (max.): 200 t, stroke length: 250 mm, throat depth: 315 mm, distance between stands: 3,650 mm, working length: 4,050 mm, The machine's control unit has been renewed! TECHNICAL DETAILS Pressing force: 200 t Bending length: 4,050 mm Frame width: 3,650 mm Stroke: 250 mm Throat depth: 315 mm Maximum tool width: 100 mm Table width: 190 mm Table height above floor: 800 mm Rapid traverse: 100 mm/s Working speed: 8 mm/s Return speed: 75 mm/s MACHINE DETAILS Control system: CYBELEC CybTouch 12 Total power requirement: 18.5 kW Current consumption: 25 A Protection: 50 A Tank capacity: 240 l Dimensions & Weight Space requirement: approx. 4.4 x 1.8 x 3.0 m Machine weight: approx. 17 t EQUIPMENT Swiveling operator panel, front right CNC electric backgauge (X axis) CNC electric depth adjustment (Y1 + Y2 axis) 4x manually adjustable, flip-up backgauge fingers Manually adjustable table crowning, via hand crank Rear and side safety guards Lhodpfxsyg Dtmo Aaled 3x front support arms Free-moving double foot switch Universal die block

Condition: new, functionality: fully functional, throat depth: 225 mm, pressing force: 28 t, table width: 300 mm, table length: 325 mm, stroke length: 150 mm, TECHNICAL DETAILS Pressing force: 28.0 t Throat depth: 225 mm Stroke: 150 mm Table size: 325 x 300 mm Working speed: 2.0 - 9.8 mm/s Return speed: 12.8 mm/s MACHINE DETAILS Total power requirement: 4.0 kW Dimensions & Weight Space required: approx. 1,800 x 900 x 2,000 mm Machine weight: approx. 650 kg Ljdpfxoyg Dr Ae Aalshd EQUIPMENT NC control for adjusting the ram stroke Selector switch for manual or semi-automatic operation Flow control and pressure relief valve Integrated pressure gauge Various tools can be mounted on the ram; there is a 40 mm hole inside for securing the tools.

Condition: ready for operation (used), functionality: fully functional, controller model: Cybelec CypTouch 12 - 3 Achsen, bending force (max.): 125 t, stroke length: 250 mm, table height: 900 mm, working length: 3,550 mm, The machine control has been renewed! TECHNICAL DETAILS Pressure: 125 t Bending length: 3,550 mm Frame distance: 3,050 mm Stroke: 250 mm Ljdeygxk Tspfx Aalohd Throat depth: 320 mm Table width: 120 mm Table height: 900 mm Return speed: 100 mm/s Working speed: 10 mm/s MACHINE DETAILS Control (renewed): Cybelec CypTouch 12 – 3 axes Oil volume: approx. 250 l Total power requirement: 11 kW Dimensions & Weight Space requirement: approx. 4 x 2 x 3 m Machine weight: approx. 11 t EQUIPMENT Hydraulic tool clamping Crowning system Swivelling operator control panel, front right Free-moving foot pedal Side safety guard (safety grille) Rear safety guard (safety grille)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 22613, bending force (max.): 200 t, stroke length: 400 mm, throat depth: 300 mm, distance between stands: 2,750 mm, working length: 3,100 mm, TECHNICAL DETAILS Press force: 200 t Bending length: 3,100 mm Frame gap: 2,750 mm Stroke: 400 mm Throat depth: 300 mm MACHINE DETAILS Control: CYBELEC DNC7000 Total power requirement: 18.5 kW Oil capacity: 330 l Suitability: Suitable only for thin sheet metal Dimensions & Weight Space requirement: approx. 4,300 x 2,400 x 3,600 mm Machine weight: approx. 18,500 kg EQUIPMENT Electric backgauge (X-axis) CNC crowning 4x controlled backgauge fingers 2x front support arms with SLIDING SYSTEM Hydraulic upper and lower tool clamping Side and rear safety guards Tools (3 cabinets) Foot switch Lodpfx Aeygw Azoalohd Operating manual

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, controller model: CYBELEC DNC 880S, bending force (max.): 175 t, stroke length: 240 mm, throat depth: 300 mm, distance between stands: 3,050 mm, TECHNICAL DETAILS Pressing force: 175 t Bending length: 4,050 mm Distance between uprights: 3,050 mm Throat depth: 300 mm Stroke: 240 mm Stroke speed (down, unloaded) max.: 140 mm/s Working speed max.: 9 mm/s Stroke speed (return) max.: 130 mm/s Distance table/punch min.: 370 mm Distance table/punch max.: 610 mm MACHINE DETAILS Control: CYBELEC DNC 880S Total power requirement: 15 kW Controlled axes: Y1, Y2, X, R Dimensions & Weight Space requirement: approx. 5.89 x 3.6 x 3.16 m Machine weight: approx. 15 t EQUIPMENT Lodpfx Ajygw Ahoaljhd CNC crowning 4x backgauge fingers (manually adjustable) Foot switch 1 set of upper tooling 1 set of lower tooling 2x front sheet supports Side and rear safety guards Operating manual

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Ljdpevvkmbefx Aalehd

Condition: used, Year of construction: 1986, pressure 63 t stroke 160 mm throat 270 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 850 mm ram surface 450 x 360 mm oil volume 360 l power requirement 23,0 kW Weight 4,60 t Ljdeylzwgspfx Aaljhd dimensions of the machine ca. 1,2 x 1,8 x 2,9 mxmxm hole in the table 280 x 190 mm SPECIAL DEAL as is where is, electrical control defective WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm Lodpfx Aowvva Sjalehd hole in the table 180 mm yom 1981 - modernization 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F