Used Hurco Vmx 42 T for sale (156)

Condition: used, Hurco VMX30m for sale Years of manufacture 2007 Ultimax Control system Dcjdowl I Sfopfx Afnsc Offline programming system Tooling Conveyor Great machine with great spec please feel free to contact if any additional information required.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition Dedpjw Nklhsfx Afnjcc

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Dcsdstrhq Hspfx Afnec Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,500 h, General Data Measurements width 3921 mm Measurements depth 5059 mm Measurements height 3240 mm Machine weight 7950 kg Dsdpjx D E Acofx Afnjcc Control Unit Brand HURCO Model WINMAX Main Drive Spindle speed range 12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 1270 mm X-Axis Rapid Traverse 32 Y-Axis Movement 660 mm Y-Axis Rapid Traverse 32 Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 Table Number of tslots 6 Table load 2000 kg Tools Max weight 7 kg Max tool diameter 80/75 mm Max tool length 300 mm This 3-axis Hurco VMX50i was manufactured in 2021. It features a robust SK40 spindle, capable of reaching speeds up to 12,000 rpm, and a large table surface of 1500 x 660 mm supporting up to 2000 kg. With X/Y/Z travels of 1270/660/610 mm and rapid traverse rates of 32/32/24 m/min, it's ideal for dynamic machining tasks. Includes a 30/40 position automatic tool changer. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min Dcjdpextfz Djfx Afnec auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2014, turning diameter over bed 0508 mm turning length 724,5 mm control Ultimax Hurco turning diameter over bed slide 336 mm spindle turning speed - stepless 0- 4500 U/min- rpm spindle bore 65 mm feeds 0-30 m/min rapid power traverse in X-and Z direction 30 m/min voltage 400 V connected load 30 KVA face slide travel 203,2 mm longitudinal travel 580/640 mm dimensions of the machine ca. 4,3 x 2,1 x 2,6 m toolpiece turning speed range 0- 5000 U/min work piece power 5,5 kW main drive motor 15/22 kW weight of the machine ca. 5,6 t c-axis 360 x 0,001 ° With 12 position turret head with live tooling (C- axe), sub spindle, power Dodov T Np Aspfx Afnjcc chuck, cooling arrangement and chip conveyor. Control: Hurco Ultimax. With many accessories.

Condition: used, Year of construction: 2007, Milling machines Travel distance X: 610 mm Travel distance Y :510 mm Travel distance Z: 610 mm Number of axis: 4 milling machine / machining center spindle revolutions: 12000 rpm table size X: 760 mm Djdpfjxdnkcjx Afnocc table size Y: 510 mm max. workpiece weight: 1000 kg input Power : 9 kW Control unit Ultimax 4

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 2300 mm Measurements depth 2800 mm Measurements height 2700 mm Machine weight 4500 kg Main Drive Spindle speed range 10000 Spindle motor power CAT40 / SK40 Number of axis 4 Movement X-Axis Movement 762 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 m/min Table Tslots size 18 mm Number of tslots 5 Table load 750 kg This 4-axis Hurco VMX30 was manufactured in 2004. It features a CNC milling machine with a rotary table for 4th axis capabilities. Key specs include a 762 mm X-axis travel, 508 mm Y-axis travel, 610 mm Z-axis travel, and a table size of 1,016 × 508 mm. It supports a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24. Consider the opportunity to buy this Hurco VMX30 vertical machining centre. Contact us for more information. Application Types Dcodex D Ikpopfx Afnsc Milling

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 704-0101-809, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 32, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Control: ULTIMAX 4 X-axis: 800 mm Y-axis: 700 mm Z-axis: 510 mm Rapid traverse (X/Y/Z): 35 m/min A-axis: ± 30° / 110° Rapid traverse A-axis: 16.5 m/min C-axis: 360° Rapid traverse C-axis: 16.5 m/min Spindle Dodpfx Afsxamfksnecc Speed range: 10 - 12,000 1/min Spindle motor: 18 kW Tool Tool holder: SK 40 Tool stations: 32 Working area Max. table load: 300 kg Table size: 610 mm x 5 mm x 5 mm MACHINE DETAILS Machine weight: 12,500 kg Space required (LxWxH): 2.700 m x 4.000 m x 3.250 m

Condition: used, Year of construction: 2004, HURCO VMX 64 Dcodpfx Aswyna Sefnec X-axis travel: 1625 mm Y-axis travel: 865 mm Z-axis travel: 760 mm CNC control: Ultimax 4 table size: 1680 x 890 mm max. table load: 2000 kg spindle taper: SK 40 rapid traverse x/y/z: 18 / 18 / 13 m/min drive capacity – spindle motor: 15 kW tool magazine: 40 positions max. spindle speed: 10,000 rpm machine fully operational

Condition: excellent (used), Year of construction: 2011, HURCO TMX8MYS H-TS8034 Year of manufacture: 2011 Dcjdoxg D A Hspfx Afnjc

Condition: excellent (used), Year of construction: 2011, operating hours: 2,400 h, functionality: fully functional, turning length: 340 mm, turning diameter: 254 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 170 mm, travel distance Z-axis: 355 mm, Working length 340 mm Max. working diameter 254 mm Swing over bed 405 mm Spindle speeds 6.000 rpm Spindle bore 45 mm Number of tools 12 pcs X-axis travel 170 mm Z-axis travel 355 mm Control MAX Running hours 2400 Main motor power 11 Kw Dcjdjxcx I Njpfx Afnjc

Condition: good (used), Year of construction: 2006, functionality: fully functional, You are bidding on a Hurco Winmax V9 package, suitable for Ultimax 4 machines built from 2006 onwards. The package has been properly uninstalled and can be reinstalled on all Ultimax machines built from 2006 onwards. The price includes hardware and installation on site. All prices are exclusive of VAT. We also have other options in stock for Winmax machines. Dedotu Uc Ejpfx Afnecc We will be happy to assist you with the installation. Please get in touch with us. You can no longer get service for your used Hurco milling machine? No problem! We offer service and retrofitting for ALL Hurco milling machines, regardless of the year of manufacture.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 19,299 h, functionality: fully functional, spindle speed (max.): 4,500 rpm, travel distance X-axis: 290 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 55 mm, turning diameter over bed slide: 508 mm, Submitting a bid obligates the buyer to collect the machine by 05.08.2025! No reserve price – guaranteed sale to the highest bidder! Lathe with main and sub-spindle – unrefurbished spare spindle included in delivery! TECHNICAL DETAILS Travel X-axis travel: 290 mm Z-axis travel: 560 mm W-axis travel: 640 mm Y-axis travel: ±55 mm Main Spindle Main spindle power: 28 kW Main spindle torque: 242 Nm Spindle nose: A2-6 Bar capacity: 64 mm Max. turning diameter: 508 mm Chuck diameter: 203 mm Spindle speed: 4,500 rpm Feed Rates X-axis feed: 24 m/min Z-axis feed: 30 m/min W-axis feed: 30 m/min Y-axis feed: 12 m/min Turret Turret stations: 12 Tool holders: VDI40 Max. boring bar diameter: 40 mm Shank cross-section: 25×25 mm Driven Tools Driven tool speed: 4,000 rpm Driven tool power: 5.4 kW Driven tool torque: 24 Nm Indexing time: 0.16 s Sub-Spindle Sub-spindle max. speed: 6,000 rpm Sub-spindle torque: 70 Nm MACHINE DETAILS Electrical connection: 66 kVA / 95 A / 400 V Air supply: 7 bar / 150 l/min Weight: 7,000 kg Operating Hours Power-on hours: 60,496 h Spindle running hours: 19,299 h EQUIPMENT Dcsdpsw A Hpdjfx Afnjc Bar feeder IRCO/Breuning SIMAG 80.1-2R-3000 Various channel guides Chip conveyor Tool setting arm (tool setter) Transformer Coolant unit Coolant tank Fixed and driven tool holders Spare main spindle (unrefurbished) Various clamping heads, size 65 Documentation (circuit diagrams, operator manual, etc.) Note: The main spindle produces noise. An unrefurbished spare main spindle is included in the scope of delivery.

Condition: used, Year of construction: 2017, operating hours: 1,200 h, functionality: fully functional, turning diameter over cross slide: 256 mm, turning length: 527 mm, spindle bore: 52 mm, spindle speed (max.): 4,800 rpm, Equipment: rotational speed infinitely variable, Description: For sale is a HURCO TM8i VDI CNC lathe with MAX5 single control, year of manufacture 2017, with only approx. 1,200 operating hours. The machine is in excellent condition, has been regularly serviced, and is immediately ready for operation. Ideal for precise turning applications in small and medium-sized batch production. Accessories / Equipment: • Tool presetter • Chip conveyor • Coolant system • Three-jaw chuck • Collet chuck with various collets • Mist extraction unit Condition: Dedexfgkkjpfx Afnecc • Lightly used (only 1,200 hours) • Regularly serviced • Immediately available • Inspection by appointment possible

Condition: used, Hurco Hawk Model 5D, with Dynapath Delta CNC control, 70-3800 RPM, 1000mm x 330mm table. Bt 40 Spindle. Immaculate condition from University. Dcsdpfx Afjya Hrrensc

Condition: used, Year of construction: 2022, x-travel 1350 mm y-travel 950 mm Dcedpfexfwg Nox Afnjc z-travel 600 mm Control MAX 5 total power requirement 35 kW weight of the machine ca. 14 t dimensions of the machine ca. 3100x4535x3495 m

Condition: used, Hurco VM30 Vertical Machining Centre. New 2012 Machine ready with transit clamps in position. Specifications: X: 50" Y: 20" Z: 20" Power: 20 hp RPM: 10,000 RPM # ATC: 20 Dcedpsx Rkyvofx Afnec Table-W: 52" Table-L: 18"

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 22 kVA, torque: 11 Nm, controller manufacturer: Milltronics, controller model: CNC 9000, total height: 2,565 mm, total length: 3,722 mm, total width: 3,210 mm, table width: 508 mm, table length: 1,168 mm, table load: 1,710 kg, overall weight: 4,300 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 610 mm, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 230 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, => Price of the machine within Germany. => Machine available ex stock. Transport from warehouse in the Netherlands or Italy to be arranged by the buyer. Further machine sizes available. => Installation and commissioning available upon request. Including auger chip conveyor and all software options such as: • Milltronics 9000-DGI CNC incl. all options for desktop, programming, milling strategies • 15" color LCD touchscreen monitor • 120 GB solid state drive • 4 GB RAM • Two USB ports • Productivity software ChipBoss, DSA, MSV, 9000-DGI Desktop Optional accessories: IKZ – Through-spindle coolant 20 bar, with rotary union and auxiliary tank with filter Programmable air cooling via spindle IKZ pre-installation for Milltronics IKZ system allows easy on-site installation of the Milltronics IKZ system IKZ pre-installation for ChipBlaster® IKZ system allows easy on-site installation of the ChipBlaster® IKZ system Programmable minimum quantity lubrication Programmable air cooling LCM 4th axis Model TDE-MV-200 complete with controller and motors LCM 4th axis Model TDE-MV-250 complete with controller and motors 5AX LCM-BSC-200 complete with controller, motors, and cables 4th axis electrical package with 1kW servo controller Milltronics M-170 (170mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics M-200 (200mm) rotary table with servomotor and cable (requires 4th axis electrical package) Dcjdpfxoxwyzyo Afnec Milltronics M-250 (250mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics TS-A135 tailstock for M-170 rotary table Milltronics TS-A160 tailstock for M-200 rotary table Milltronics TS-B185 tailstock for M-250 rotary table 180 mm three-jaw chuck with adapter flange (only for Milltronics M-170 and M-200 rotary tables) 230 mm three-jaw chuck with adapter flange (only for Milltronics M-250 rotary table) Tsudakoma 4th axis Model RNE-160R with motor (4th axis electrical package must also be ordered) Tailstock for Tsudakoma RNE-160R Tsudakoma 4th axis Model RNE-200R with motor (4th axis electrical package must also be ordered) Tailstock for Tsudakoma RNE-200R Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros OTS tool setting probe with optical signal transmission and macros Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros Renishaw OMI-2T included OTS tool setting probe with optical signal transmission and macros Renishaw NC4-F300 non-contact tool measurement DIN / CAT tool holders Hinged belt chip conveyor External keyboard uses 1 USB port Electronic spindle cooler Additional work light Additional "M" functions block with 4 units Programming manual in paper format Machine manual in paper format

Condition: ready for operation (used), Year of construction: 2021, This 3-axis Hurco VM 10i was manufactured in 2021, featuring advanced capabilities like MAX5 control with dual 19" LCD displays, Ethernet and USB interfaces, and a solid-state drive for enhanced performance. It includes high-pressure coolant systems through the spindle, integrated hydraulic tool clamping, and a chip auger for efficient chip management. Consider the opportunity to buy this Hurco VM 10i vertical machining centre. Contact us for more information about this machine. • Includes MAX5 control with detachable electronic handwheel • 2 × 19" LCD color displays (text + graphics) • Network interface • 2 software units for programming • Internal self-diagnostics • Windows platform • Integrated hydraulic tool clamping system • Cooling flood through spindle with ICS (20 bar) • High-pressure cooling flood system • Spindle cooler • Chip auger • Chip splash guard cabin • LED machine light in the work area Djdpfx Afox H A I Rsnjcc • Indicator light for machine operating status • Trochoid milling cutter function for higher machining performance • Tool and workpiece measurement • Collision protection with islands • Synchronous thread cutting • ISNC extended NC mode

Condition: ready for operation (used), Year of construction: 2000, operating hours: 5,374 h, travel distance X-axis: 610 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 540 mm, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Hurco BMC 2416 vertical machining center was manufactured in 2000. It features a robust Ultimax control system, a spindle speed of up to 8000 rpm, and rapid traverse rates reaching 24003 mm/min. With a tool magazine of 24 positions and generous travels in X, Y, and Z dimensions (610, 406, 540 mm respectively), consider the opportunity to buy this Hurco BMC 2416 vertical machining center. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max rapid traverse: 24003 mm/min • Max contour feed: 7620 mm/min • Tool positions: 24 Extra Information Machine still under power Djdpfjx D Nz Njx Afnocc

Condition: good (used), Year of construction: 2012, • Spindle: 30,000 rpm • Taper: BT30 • Control: Hurco WinMax • Working hours: 13'000 Condition / equipment: • 5-axis simultaneous positioning • Tool changer: 20 tools • Spindle chiller • Tool measurement • Tooling negotiable Dedpfjya D Sisx Afnecc • Compressed air gun

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1270 x 508 x 508mm, 20 station tool changer, Dsdpsxzt Sasfx Afnjcc Table 1321 x 457mm, 15kW Spindle Motor , Spindle Taper DIN40, spindle speed 40 - 8000rpm, Hurco WINMAX Control, Low Volt Light, Coolant

Condition: good (used), Year of construction: 2015, Table size 3000 x 1700mm, Traverses X Y Z 3200 x 2100 x 920mm, Table load 11,000kgs, spindle nose to table 164 – 1084 mm, spindle bored Din 50, spindle speed 6000 rpm, Dcedpjwu Dlaofx Afnoc 40 station ATC, Hurco Winmax 5 control. swarf conveyor

Condition: good (used), Year of construction: 2004, operating hours: 21,000 h, Hurco 3 axis vertical machining center in good condition with ca 21000 operating hours. Ready for immediate delivery (dismantled and transport ready). Cnc control Hurco Ultimax X-axis 600 mm Djdpfxex Uqm Do Afnjcc Y-axis 355 mm Z-axis 455mm Motor 7.4 KVA Frequency 50 Hz Full load 13 KVA AC volts 3 phase 400 Capacity Tool Magazine 16 positions Type of tool holder SK40 Max spindle speed: 8000 rpm Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.