Used House Connection Column for sale (19,769)

Condition: used, Hydraulic Double-Column Press Double-Column Hydraulic Press SCHÖN Type TES 25 Machine No. 1847 Year of manufacture: 1977 – Retrofit in 2019 Fully overhauled by Schön in Hattingen in 2019 – Excellent condition Press force: 25 tons Column gap: 500 mm Side clearance between columns: 120 mm Table size: 440 x 320 mm Table opening: Ø 50 mm Ram surface: Ø 140 mm Clamping pin: Ø 40 mm Rsdpeyg Rfpsfx Aa Uep Max. ram stroke: 100 mm Max. installation height: 330 mm Table height above floor: 910 mm Motor output: 4 kW Electrical connection: 400 V, 50 Hz - Complete hydraulic system replaced during 2019 overhaul - Entire electrical control system (contactor-based) renewed in 2019 to new machine standard - Stroke release via two-hand control, electric foot switch, or light curtain - Operating modes: setup, single stroke two-hand, single stroke via foot switch, control via light curtain - SICK light curtain, Type C 4000 with single- and dual-cycle, and safety function - Rapid approach and working stroke - Pressure- or stroke-dependent stroke limitation - Mechanically adjustable fixed stop - Manual press force regulation via knurled knob - Press dwell time extension: 0.5–3 sec. (pressure holding time) - Stroke counter - UVV safety inspection in accordance with BGR 500 (for manual loading) performed in 08/2019 - Full documentation available (user manual, hydraulic diagram, circuit diagram) Required floor space (L x W x H): 1100 mm x 1050 mm x 2100 mm Weight: 900 kg Very good condition

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: Rjdpfx Aaogpxc Sj Ujp - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: good (used), Year of construction: 1989, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Redod E U Nnepfx Aa Uep Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Year of construction: 1996, condition: excellent (used), machine/vehicle number: MBMA2021, Technical data: 1 steel column slewing crane NL 250 KG Available 3 times Payload at full radius 250KG payload Height: approx. 3.5m, UK boom: approx. 2.95m Projection: approx. 2.2 m, hook height: approx. 2.5 m Weight completely approx. 350KG Rjdpfx Aeqwn Ukja Uep with 250kg chain hoist with floor control Connection to 400V 16A, swivel range 270° Crane is dismantled and packed on a pallet Good condition, see pictures Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Shipping by courier or collection by appointment

Year of construction: 1992, condition: like new (used), machine/vehicle number: Div1, Technical data: 1x Demag KBK 1 pillar slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125to payload Height: about 3.5m UK outrigger: approx. 3m Outreach: approx. 4m Hook height: approx. 2.55m Weight complete approx. 450 kg Rsdpjng H T Usfx Aa Ujp with steel or Demag chain hoist 125 kg depending on stock incl. bolts, drag cable, chassis, end cap etc. Various cranes are available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Dispatch by forwarding agent or pick-up only by appointment

Condition: used, Year of construction: 1973, pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Redpfxeyn R Elo Aa Uop Cut Shock absorption hydraulic weight of the machine ca. 280 t The machine was overtaken 1999.

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm Rjdpeyn R Efofx Aa Usp ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled

Condition: used, Year of construction: 1973, pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock absorption hydraulic Rsdjyn R D Uepfx Aa Ujp weight of the machine ca. 280 t The machine was overtaken 1999.

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005 Rjdpfx Aaeyn R D Is Uop

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t Rjdpfx Aajyn R Dzj Uop stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm Redjyn R Duspfx Aa Uep stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm Rsdpfxetqm Dmj Aa Uop column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Condition: good (used), Year of construction: 1992, machine/vehicle number: 92-1003, Offer 26005 Technical data: - Max. pressing force: 100 t Rodpfxeylifle Aa Ujp - Max. ram stroke approx.: 300 mm - Working speed: 8 m/sec - Installation height approx.: 400 mm - Throat depth to ram center: 270 mm - Ram clamping area: 680 x 410 mm - Ram clamping shaft: 50 mm - Table size: 1000 x 600 mm - Table bore / thru-hole in table: 110 mm - Table height above floor: 930 mm - Drive: 400 V / 7.5 kW - Space requirement approx.: W 1150 x H 2300 x D 1250 mm - Weight approx.: 3500 kg

Condition: used, Year of construction: 2017, x-travel 5850 mm y-travel 2500 mm z-travel 1000 mm Control 840D sl feeds x- + y-axis 20 m/min feeds z-axis 20 m/min acceleration 5 m/qs spindle drive - main spindle 60 kW spindle turning speed - stepless 24.000 U/min max. torque on the working spindle 87 Nm tool taper HSK-A63/F80 c-axis +/- 360 grad a- axis +/- 100 grad tool changer 20 stück coolant tank 2300 l surface area 6.000*2.500 mm number of T-slots 18 flute distance 125 mm dimensions of the machine ca. 14,8x7,3x5,8 m Machine table Width 2,500 mm Length 6,000 mm Number of T-slots 20 Distance of T-slots 125 mm Dimensions of T-slots 18H8 mm Max. table load 8,000 kg Travels Cross rail: X axis 5,850 mm Cross slide: Y axis, horizontal 2,500 mm Z axis, vertical 1,000 mm Feeds X-, Y- and Z-axes Feed rate 20 m/min Rapid traverse rate 45 m/min Acceleration 5 m/s² Vertical Slide Cross section 560x420 mm Motor spindle Drive power S1 (100% ED) 60 kW Max. speed 24,000 rpm Max. torque 87 Nm Tool interface HSK-A63/F80 Redpfjycln Dsx Aa Uop C-axis Swivel range ±360 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm A-axis Swivel range ±100 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm Total dimensions Length 14,800 mm Width 7,300 mm Height 5,800 mm

Condition: new, Year of construction: 2025, neu 2025 070145 prompt, Zwischenverkauf v Türkei 44500 € 849.95 € 1 40 to 4 mm 630 mm 450 mm 160 mm 3 - 75 mm Rsdpfx Ajxcg D Sea Uop 154 1/min 420 x 275 mm 8 75 mm 40 mm 230 mm 293 mm 4 kW 1174 mm 1540 mm 2200 mm 2850 kg 8-fold ram guide 2-hand control panel and foot pedal Automatic central lubrication Front light guard Vibration pads User Manual in German with CE Declaration of Conformity

Condition: new, Year of construction: 2026, neu 2026 070126 prompt, Zwischenverkauf v Türkei 48500 € 926.35 € 1 60 to 3.5 mm 500 mm 700 mm 190 mm 1 - 100 mm 65 1/min 4 70 mm 45 mm 260 mm 365 mm Rjdpfxowwwtij Aa Uop 5,5 kW 1250 mm 1350 mm 2400 mm 3500 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Automatic central lubrication Equipment in accordance with CE regulations OPTIONS: vibrations pads bolster plate

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 33700 € 643.67 € 30 to 2 mm 400 mm 600 mm 150 mm 1 - 60 mm 140 1/min 4 60 mm 40 mm 200 mm 300 mm 3 kW 1300 mm 1150 mm Rodpswirbxefx Aa Uop 2050 mm 1670 kg welded steel construction body frame 4-fold ram guide pneumatic clutch-brake combination photocell light barriers mechanical overload protection two hand and foot pedal control manual adjustable stroke manual central lubrication according to CE rules Options: vibrations pads € 132,- bolster plate € 720,- picture incl. optional available bolster plate

Condition: new, Year of construction: 2026, neu 2026 070125 prompt, Zwischenverkauf v Türkei 40200 € 767.82 € 1 40 to 2.5 mm 450 mm 650 mm 150 mm 1 - 80 mm 125 1/min 4 75 mm 40 mm 225 mm 300 mm 835 mm 4 kW 1350 mm 1370 mm 2330 mm 2100 kg Welded steel frame construction 4-fold ram guide Rjdpfowiqvzex Aa Usp Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual rammer adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations OPTION: Vibration pads € 192,-- Bolster plate € 830,--

Condition: used, Year of construction: 2000, travel distance X-axis: 9,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table width: 1,200 mm, table load: 5,000 kg, table length: 9,500 mm, Bed Milling Machine 5-axis Table size 9500 x 1200 mm. Movement x-Axis 9000 mm. y-Axis 1500 mm. z-Axis 1500 mm. Max table load 5000 kg/mtr Swiveling of vertical milling head 1°x1º CNC Control Heidenhain TNC 430 CB Redpox Tucmjfx Aa Ujp If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, overall weight: 221 kg, total length: 400 mm, total width: 400 mm, total height: 540 mm, Cross tooling column with Gressel Rodex Ttzzepfx Aa Ujp Mounting holes 4 Pitch fixing holes 320 mm Length 400 mm Width 400 mm Height 540 mm Weight 221 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, overall weight: 208 kg, total length: 400 mm, total width: 400 mm, total height: 470 mm, Erowa ER-051145 FL-AA0324 Double side tooling column with Erowa Mounting holes System Erowa Length 400 mm Width 400 mm Redpfxjx Ttzbe Aa Uep Height 470 mm Weight 208 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: AGH633, Technical data: 1 ABUS LS column slewing crane, rated load 1000 kg Capacity at full outreach: 1000 kg / 1 t Height: approx. 3.4 m Underside of jib: approx. 2.55 m Outreach: approx. 4.5 m Hook height: approx. 2.15 m Total weight approx. 1000 kg incl. anchor plate, diameter 110 cm Incl. Abus GM chain hoist 1000 kg Slewing range 270°, connection 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes available, capacity from 80–5000 kg, please inquire See pictures Rodsxdvk Repfx Aa Uep Shipping by freight forwarding or collection by appointment only

Condition: like new (used), Year of construction: 2001, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,500 mm, position of the milling head: 0,001, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 15,000 m/min, rapid traverse Z-axis: 15,000 m/min, spindle speed (max.): 3,000 rpm, table length: 9,000 mm, table width: 1,500 mm, year of last overhaul: 2025, ZAYER 30KCU 8000 Milling Machine Travel: 8000x1250x2500 mm Heidenhain 430 CNC Rsdpoyivdvefx Aa Usp 45° Head, 6000 rpm, thousandth precision Direct output head, 6000 rpm Fixed table, 9000 mm 60-tool magazine Chip extractor Rotary table 2000x2000 mm

Condition: good (used), Year of construction: 1982, machine/vehicle number: 340, Offer 25032 Rsdpfx Aasyk Dp Nj Uep Technical data: - Drilling capacity in steel ST 60: 50 mm - Maximum drilling capacity in steel ST 60: 65 mm - Thread cutting device up to: M 60 - Drill spindle taper: MK 5 - Drill spindle stroke: 240 mm - Throat depth: 400 mm - Table with 2 T-slots: 720 x 560 mm - Max. distance table – drill spindle approx.: 850 mm - 4 feeds: 0.1 - 0.2 - 0.3 – 0.4 mm/rev - Feed gearbox infinitely variable with change gearbox - Spindle speeds infinitely variable: 40 - 1,600 rpm - Drive: 400 V / 5.5 kW - Space requirement approx.: W 850 x H 2,480 x D 1,350 mm - Weight approx.: 1,450 kg

Condition: good (used), The scope of delivery includes: 01x support post, used Material color: blue total length: approx. 1.660 mm profile dimension: U: 70 x 30 mm material thickness: approx. 2,00 mm number of drill holes: 02 pcs. Drill hole Ø: approx. 11 mm Base plate dimension: approx. 130 x 130 x 3.00 mm Weight / pcs. : approx. 3,570 kg Rodpfek Uufxex Aa Uop