Used Hot Water Regulator for sale (11,269)

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, The HDT50 in the hot water trailer version covers a pressure of 230 to 500 bar at a flow rate of 33 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. Durability and corrosion resistance are ensured, among other things, by the frame inside the trailer, which is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very attractive appearance. The frame can be pulled out very easily for maintenance. The CD50 in the trailer version can be configured with numerous options, such as a hot water boiler, electrically operated hose reel, remote control, etc.. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Models available: ----- Model Pressure Flow rate HDT50-230 230 bar 80 Lpm HDT50-400 400 bar 40 Lpm HDT50-500 500 bar 33 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 Cyl. water cooled Drive motor power: 37.3 kW Drive motor speed: 1900 rpm Tank capacity: 90 L Dsdpfx Afjhgbkusnsun Max. Fuel consumption: 11.0 L/h Loudness (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900 mm (2000 kg)

Condition: ready for operation (used), Year of construction: 2020, Cooling output: 420kW, connected load: 7.1kVA, weight: 4.9t, with Cooling Tower Baltimore Aircoil International TXV 237R and Desalination Control System Chemie + Wasser Lohbeck DS6, with documentation, an inspection is possible. Djdpfxsu Rn Age Afnjun

Year of construction: 2020, operating hours: 1 h, condition: new, - Pressure washer PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, ... - cold water / hot water / steam 32 bar up to 140°C / high pressure steam 150 or 200 bar up to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and empty weight : 110x64x98cm, approx. 150kg - incl. 10 m high pressure hose, spray gun, lance and flat jet nozzle 25°. Dujdpfjfh Skasx Afnen

Condition: like new (used), Year of construction: 2018, Dynajet 500th Pressure Washer Year of manufacture: 2018 Max. temperature range: 95°C Brand: Dynajet Mobile: yes Serial number: 62005720 Duodpeyigr Ujfx Afnen Type: 500th Maximum working pressure: 500 bar With remote control; water tank 1000 l; unladen weight 1420 kg; approx. 30 m high-pressure hose; approx. 25 m filling hose; operating hours: 597 hours; tested and fully functional

Year of construction: 2014, condition: good (used), Cryovac STE96-600 hot water shrink tunnel Dsdpfomx Sknox Afnjun Serial: SN00422 2014, Stainless hot water shrink tunnel, steam, belt dimensions 1300mm x 600mm, max product height 220mm, HMI touch screen control, 3Ph

Condition: good (used), Year of manufacture 2008, 3,160 operating hours, newly serviced, very well maintained, NEW HD pump by FALCH Dedpfx Aewy Elljfnoun

Condition: excellent (used), Year of construction: 2005, Hot water tank/heat storage tank made of V4A, upright Technical data / dimensions Available quantity: 1 Volume: approx. 164,000 liters Tank type: Storage tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 3,900 mm External diameter: approx. 4,200 mm Cylindrical height: approx. 13,000 mm Total height: approx. 17,220 mm Weight: approx. 10,500 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: unpressurized Wall thickness shell / cylinder: approx. 5.3 - 7 mm mm Ground clearance: approx. 1,800 mm Operating temperature: -10°C/+90°C degrees Celsius Material / properties Material inner jacket: V4A (1.4571) Material double jacket: Stainless steel Inner surface: 2B Weld seams ground on the inside Insulation Insulation available Insulation thickness: approx. 100 mm Insulation material: Mineral wool Insulating jacket material: Aluminum Insulating jacket: screwed/riveted Notes: Cone roof cladding: Stainless steel Cylinder cladding: Aluminum trapezoidal sheet Cone cladding: Aluminum smooth sheet Equipment Stand form: foot ring/stand frame Fastening: fixed Top shelf type: Conical base Bottom shelf type: Conical base Top floor: 1 x dome DN 200 with insulating cover 1 x flange DN 32 welded in the dome (CIP) 1 x DN 32 dome drainage 1 x DN 50 cable conduit 1 x overflow DN 150 2 x crane eye Jacket: 1 x inlet pipe DN 100 1 x filling pipe DN 100 4 x thermometer sleeve (ø 26 mm) with insulation box 1 x CIP line DN 32 1 x type plate 1 x access door (approx. 2,000 x 1,000 mm) 1 x DN 100 outlet nozzle Underbody: 1 x swivel cone DN 450, ending in smooth flange DN 100 Notes: Otherwise as per pictures and drawing Duodpeqagl Hefx Afnon documentation Drawing

Year of construction: 2020, operating hours: 1 h, condition: as good as new (ex-display), PTC JTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only version 350 bar) Trailer similar but no Dynajet, Oertzen, Falch, DIBO, ... - Single-axle trailer on hot-dip galvanized frame with support foot with wheel, parking brake, automatic reverse, parking feet, rear lights and reflectors, towing eye for 50 mm coupling, 13" tires and ABS. The following hot water models are available: JTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12,6kW JTR-H 23/350 | 23l/min. at 350bar | Motor: Kohler KDW 1404 26kW JTR-H 20/500 | 20l/min. at 500bar | Motor: Kohler KDW 1404 26kW Dusdpfx Aofdvkzjfnsn JTR-H 30/500 | 30l/min. at 500bar | Motor: Kohler KDW 2204 37,5kW - Dimensions: 3.370 x 1.640 x 1.540 - empty weight: approx. 650 kg - High pressure pump: Comet RW/TW Premium - HD reel: manual with max. 30 m. 1/2" or 100 m. 3/8" hose (included) - Water supply reel: manual with 50 m. 3/4" hose - Water tank: 600 l - Diesel tank: 75 l - Anti-lime pump with tank - 75 kW heating module - Options and accessories on request

Condition: good (used), Top-maintained Falch Trail Jet 15 500 bar Djdpfx Aeuvd N Ssfnoun 1790 hrs Year 2019 Purchased from Falch Hot water Service maintained by Falch Various accessories optional

Condition: good (used), Trail Jet 30 500 bar, 30 liters 2600 operating hours Dedpfjxcx Tfjx Afnsun

Condition: used, Year of construction: 2019, Insulated, upright stainless steel tank with heating jacket (+temperature control) and pressure booster pump (3 m³/h at 3 bar). The tank is also equipped with a drain pipe, level indicator and pressure gauge. Additional title: vertical, insulated, heatable stainless steel tank Gross volume: 2000 l Height: 2100 mm Duodpexwy Aqjfx Afnsn Material: Stainless steel 1.4404 (AISI 316 L) with insulating cladding made of 1.4301 (AISI 304) Base construction: standing on 4 feet Features: Insulation (insulation thickness 50 mm); heating jacket; temperature control; pressure booster pump (Grundfos); outlet pipe; hose level indicator; pressure gauge

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High pressure cleaner PTC Torpedo Compact 21/250, 21/350 and 15/500 similar but no Dynajet, Oertzen, Falch, .... - Cold water / hot water approx. 95°C and steam 32 bar up to 140°C + high pressure steam up to 150°C at 200 bar (only versions with 250 and 350 bar) and chemical free weed killing function with approx. 99°C The following models are available: - Torpedo Compact 23/250 | 23l/min. at 250bar | Diesel engine: Kohler KDW1003 18,9 kW with electric starter - Torpedo Compact 23/350 | 23l/min. at 350bar | Diesel engine: Kohler KDW1003 18,9 kW with electric starter - Torpedo Compact 16/500 | 16l/min. at 500bar | Diesel engine: Kohler KDW1003 18,9 kW with electric starter - Torpedo Compact 16/250 HP (high pressure steam) | 16l/min. at 250bar | Diesel engine: Kohler KDW1003 18,9 kW with electric starter - Torpedo Compact 16/350 HP (high pressure steam) | 16l/min. at 350bar | Diesel engine: Kohler KDW1003 18,9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High pressure pump: Comet RW/TW three plunger pump with ceramic plungers - Operating hours counter - pressure gauge - pressure regulator - safety valve - High quality painted steel frame with forklift lugs - Stainless steel covers - Magnetic descaling device - incl. 20 [...] Dsdpfxedqkrwe Afnsun

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 5 h, - High-pressure cleaner PTC Torpedo Eco Compact 16/200, similar to but not Dynajet, Oertzen, Falch, DIBO, etc. - Cold water / hot water approx. 95°C, steam 32 bar up to 140°C, and chemical-free weed control function with approx. 99°C TECHNICAL DATA: - Torpedo Eco Compact 16/200 | 16 l/min at 200 bar | Diesel engine: Yanmar L100N 8.5 kW - Dimensions and unladen weight with 500 l water tank: 2000x1050x1100 mm, approx. 350 kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW triple plunger pump with ceramic plungers - Hour counter - Pressure gauge - Pressure regulator - Safety valve - High-quality frame made of painted steel, also available with forklift sleeves - Stainless steel covers Dusdpfx Aofdkcgsfnsn - Magnetic descaling device - incl. frame for water tank, 500 l water tank - incl. basic accessories such as 20 m high-pressure hose, spray gun, lance, and 25° fan nozzle - Optional accessories such as water-sandblasting kit, surface cleaner, rotary nozzle, weed control lance and trolley available on request

Condition: as good as new (ex-display), Year of construction: 2025, PTC CTR-H Hot Water 95°C, Steam 140°C/32 bar, and High-Pressure Steam 150°C/200 bar (only for version 16 l/min and 350 bar). Trailer similar but not Dynajet, Oertzen, Falch, DIBO, etc. - Single-axle trailer on galvanized frame with jockey wheel, parking brake, automatic reverse, support legs, rear lights and reflectors, towing eye for 50 mm coupling, 13" tires, and ABS. The following hot water models are available: Duodpfxefdkakj Afnjn CTR-H 21/200 | 21 l/min at 200 bar | Engine: Kohler KDW702 12.6 kW CTR-H 20/350 | 20 l/min at 350 bar | Engine: Kohler KDW1003 19 kW CTR-H 16/350 | 16 l/min at 350 bar | Engine: Kohler KDW1003 19 kW | High-pressure steam 150°C at 200 bar - Dimensions: 3,045 x 1,390 x 1,190 mm - Unladen weight: approx. 400 kg - High-pressure pump: Comet RW/TW Premium with integrated gearbox - HD hose reel: manual, max. 60 m 1/2" or 80 m 3/8" hose (included) - Water supply reel: manual, 35 m 3/4" hose - Water tank: 200 l - 75 kW heating module - Options such as warning light, automatic hose reel, and accessories available on request

Condition: used, Vertical hot water tank with internal heating coil for heating with steam. Capacity approx. 30 hl. Additional title: Heatable tank Content approx.: 3000 l Width: 1400 mm Height: 2800 mm Material: stainless steel Position: free standing Dedjw Tdx Aepfx Afnsun Base construction: Cylindrical tank on pipe feet Features: 1 tank with heating device, temperature gauge, outlet in the centre of the base, manhole at the top, overflow

Condition: good (used), Falch T3H, 600 operating hours, new service, 300 bar hot water, very well maintained, 1996 Duedpowxm Ewjfx Afnen

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. Dodpfx Afjtywzqsnoun At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: excellent (used), Item: D-10800-BacTerminator BacTerminator BTM10FD11001 Water Disinfection Equipment Inclusive pumps, Control and other accessories. Dodpoh Dxqvefx Afneun Nice condition

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: DC, warranty duration: 24 months, compressed air connection: 2 bar, overall weight: 20 kg, filling weight (max.): 1,000 g, filling weight (min.): 100 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: new filling machine suitable for dispensing liquids, pastes, and semi-viscous products, such as: - Disinfectants - Shampoos & lotions - Creams - Honey & jam - Milk & yoghurt - Water & alcohol - Sauces (e.g., pesto) - Etc. Simple, reliable, and immediately deployable This filling machine operates on compressed air and 220V and is fully plug & play. As a result, the machine is very user-friendly and particularly suitable for filling small to medium-sized batches. A small compressor is sufficient to run the machine; one can be supplied if desired. Flexible filling (100 – 1000 ml) Dodpfjrivwfox Afnsun The machine is equipped with a 1000 ml cylinder, allowing for a maximum of 1000 ml to be filled per cycle. - Minimum fill quantity: 100 ml - Any quantity between 100 and 1000 ml can be dispensed in a single stroke - Larger volumes can easily be achieved by multiple cycles Large hopper & expansion options Standard supplied with a 30-liter stainless steel hopper. There is also the option to connect to an IBC container or 200-liter drum, enabling quick and efficient handling of larger filling volumes. Manual or automatic operation The machine offers: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher volumes Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high-quality construction - Weight: approx. 15–20 kg - Easy to place on a table - Fully made of high-grade stainless steel - Robust, industrial build quality More information For questions, feel free to email us; we are happy to assist you with this or other machines. Additionally, we also offer a labeling machine, which is an excellent combination with this filling machine for a complete filling solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, total width: 42 mm, total length: 101 mm, total height: 67 mm, compressed air connection: 2 bar, overall weight: 17 kg, filling weight (max.): 500 g, filling weight (min.): 50 g, input voltage: 230 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: New filling machine suitable for precise dispensing of liquids, pastes, and semi-viscous products. Suitable applications include: - Disinfectants - Shampoos & lotions - Creams & gels - Honey & jam - Milk & yogurt - Water & alcohol - Oils & sauces (such as pesto) And many other products Dodpoyfg Scofx Afnsun Reliable, simple, and efficient This machine operates entirely pneumatically and requires only compressed air. As a result, it is very low-maintenance, reliable, and immediately ready for plug & play operation. A small compressor is sufficient to operate the machine; a compressor can be supplied upon request. Flexible fill volume The filling machine is equipped with a 500 ml cylinder, allowing a maximum of 500 ml to be dispensed per stroke. - Minimum fill quantity: 50 ml - Any volume between 50 and 500 ml can be dispensed in a single stroke - Larger volumes are easily achievable by conducting multiple strokes consecutively Large hopper & expansion options The machine features a 30-liter stainless steel hopper. It can also be connected to an IBC container or 200-liter drum, allowing for swift and efficient processing of larger filling batches. Manual or automatic operation The filling machine comes with: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher throughput Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high quality - Weight: approx. 20 kg - Easily placed on a table - Fully constructed from high-grade stainless steel - Excellent industrial build quality Interested or have questions? Do you have questions or would you like more information? Please feel free to contact us via email — we are happy to assist you. We also offer a labelling machine that combines perfectly with this filler for a complete filling line solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Year of construction: 2017, condition: ready for operation (used), Cutting heads: 2, cutting head type: AWJ 2D, abrasive feed: system SM4000, pump type: KMT Streamline SL-VI Standard, max. pump pressure: 3800bar. Table dimensions X/Y: 3200mm/1710mm, cutting dimensions X/Y: 3010mm/1510mm, travel range X/Y/Z: 3010mm/1510mm/250mm, travel speed: 12m/min, cutting head distance range: 90mm-450mm, positioning accuracy: +/-0.075mm, repeatability: +/-0.035mm, control: Fanuc 0i-MF, operating hours: 4866h. Includes oil cooler, water treatment, and safety zone. Documentation available. On-site inspection possible. Duedpfx Aexp Rcfjfnsn

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Dusdpsxhfl Eofx Afnsn Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: used, This listing is for the Veolia/Elga PC1ANRXM2 Purelab Chorus The unit is in full working condition and is ready for immediate release The Veolia ELGA PURELAB Chorus 1 Complete is a high-performance water purification system engineered for laboratories demanding the highest water purity. It is ideal for supporting analytical research, quality control (QC) testing, and pharmaceutical manufacturing processes, delivering reliable Type I ultrapure water. Key Specifications Water Quality: 18.2 MΩ·cm resistivity (Type I) Flow Rate: Up to 20 litres per hour Features: Advanced PureSure® deionization for consistent water quality Fully recirculating system to maintain microbial purity Real-time TOC monitoring to ensure organic purity Integrated filtration for endotoxins, proteins, particulates USB data capture for performance validation Dusdpfjxv A Uajx Afnon Optional ELGA Biofilter for biologically active impurities Cost-effective design supporting QC testing to validate drug purity in pharmaceutical manufacturing Consumables engineered to minimise cost and environmental waste Ideal Applications Analytical Research Life Sciences Pharmaceutical QC Testing Glassware Washing and Ultrapure Feed Systems

Condition: excellent (used), Nordson Hot Melt Heated Hoses 4 qty 8 ft long heated hoses Dedpfxswuqfye Afnjun Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included In excellent working condition

Condition: used, Nordson Problue 7 Hot Melt Pump Model Problue 7 Dusdpfowq S Eyox Afnsn