Used Horizontal Shaper for sale (6,687)

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table width: 1,270 mm, table length: 1,400 mm, table load: 4,535 kg, overall weight: 20,800 kg, spindle speed (max.): 7,500 rpm, CNC Haas with 15-inch LCD screen Table size: 1400x1270 mm Maximum table load: 4,535 kg Spindle ISO 50, power 22.4 kW Maximum spindle speed: 7,500 rpm Travels: 1626x1270x813 mm Tjdeypv T Rjpfx Akied 50-position tool changer Chip conveyor Weight: 20,800 kg

Condition: used, Camam horizontal and vertical double mortising machine Tsdpfx Ae Ahgp Aekisd

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Todjzb Il Njpfx Akiod Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, Year of construction: 1990, cutting diameter 340 mm saw band length 5800 × 41 × 1,3 mm mm cutting width 700 mm turning speeds 17-120 m/min 700 x 340 mm mm total power requirement 4 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 3,0 x 1,8 x 1,5 m The BEHRINGER HBP 340/700 G is a semi-automatic horizontal band saw designed specifically for cutting flat profiles, beams, and solid materials in heavy steel construction and metalworking. The "G" in the model name denotes an integrated miter-cutting function, which allows for precise angled cuts. Todpfxs Agckyj Akiod

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 49149, operating hours of spindle: 39,072 h, number of slots in tool magazine: 280, Equipment: chip conveyor, For sale is an extremely robust and reliable horizontal 4-axis machining center, Heller MCH 250, manufactured in 2008. The machine is designed for high-precision heavy-duty machining and is in operational condition. Equipment: - Horizontal spindle - 2-position pallet changer - Rotary table - Additional 4-position rotating pallet changer (Keppeler, SN: M4.4914900) - Siemens 840D control - 280-position tool changer - Chip conveyor Knoll 330S-1/150 - Coolant/lubricant treatment system with band filter, Siemens Simatic control - Cooling unit BKW Accessories: - Workbench (4 drawers, 1 door) - Swivel chair - Shelf - PC, mouse, keyboard, monitors Tjdpfx Akj Afxw Heiod Attractive offer – flexible and worry-free We offer not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together, we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, Year of construction: 2018, Müga H 250-5 horizontal CNC machining center" Horizontal CNC machining center Müga Type/Model: H 250-5 Condition: Used New spindle with currently 0 spindle hours Year of construction: 2018 Tjdpoz Syxtsfx Akied Technical data Travel distances X / Y / Z: 380 mm / 250 mm / 350 mm B-axis: Swiveling round table: Ø 250mm Rated voltage: 400 V, 3 phases 50 Hz Circuit 1: 250 V 50 Hz Circuit 2: 24 VDC Installed power: 30 kW Pre-fuse: 50 A Pneumatic connection: 6 bar Weight approx.: 60,000 kg Machine dimensions (L x W x H) approx.: 1.7 m x 4.1 m x 2.5 m Equipment - Siemens Sinumerik S 828 D control system - FMB bar loader - Additional coolant filtration for the internal cooling system - Chip conveyor Inquiry item: Transport costs in a customized offer.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, SPINNER H500-A HORIZONTAL CNC MACHINING CENTER SPINNER H500-A (YEAR OF MANUFACTURE 2012) Travel ranges: X = 700 mm, Y = 650 mm, Z = 650 mm Horizontal milling and drilling Multi-sided machining in conjunction with a rotary table as the 4th axis Dual-pallet changer, 2 x 500 x 500 mm Todpfx Aoz Ri Rvokijd 60-tool changer, automatic workpiece measuring probe Glass scales in all axes, laser tool measurement SK 40 with 12,000 rpm and 40 bar through-spindle coolant

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 48014, Equipment: chip conveyor, For sale is a horizontal, high-performance machining center, HELLER MCH 280, in operational condition. This machine, manufactured in 2007, is specifically designed for high-precision series production and demanding heavy-duty machining. Thanks to its robust construction and powerful spindle, the center guarantees maximum stability and durability. Equipment: - Horizontal spindle - 2-position pallet changer with rotary table - Siemens 840D control system Todo Afwh Dspfx Akisd - BKW cooling unit - Knoll chip conveyor - Knoll coolant/lubricant treatment system, Siemens OP7 control - 2nd operating unit - Tool changer Accessories: - Table with mounted clamping device (Diebold) - Telescopic drawer cabinet Contents: Hand tools, machine accessories Attractive offer – flexible & hassle-free We offer not only a high-quality product but also customized financing options that can be tailored to your needs. Whether it's a down payment, installment payments, or individual financing models, we will work together to find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please feel free to contact us for more information or a non-binding offer. We will provide you with personal and expert advice. Subject to prior sale, changes, and errors!

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 49063, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 69,700 h, For sale is a highly productive, horizontal 4-axis CNC machining center, type Heller H 4000, manufactured in 2008. This machine comes from a plant closure and is characterized by its exceptional stability, high precision, and maximum reliability in series and single-part production. It is fully functional and can be inspected while powered on, by arrangement. Equipment: - Horizontal spindle - Pallet changer with rotary table - Additional 4-position rotary table Keppler SN: M4.4906301 (each with a rotary table) - Chip conveyor Knoll 600K-1 - Fine chip removal system - Coolant/lubricant treatment with band filter Accessories: - Workbench (8 drawers) - Telescopic drawer cabinet - Storage shelf Contents: Hand tools, various analog and digital measuring instruments, machine accessories Attractive offer – flexible & worry-free We offer you not only a high-quality product but also customized financing options that are tailored to your needs. Whether it’s a down payment, installment payments, or individual financing models – together we will find the right solution. On request, we can also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don’t have to worry about anything. 📞 Feel free to contact us for more information or a non-binding offer. We will provide you with personal and competent advice. Todpfxe Afva Es Akiod Subject to prior sale, changes, and errors!

Condition: good (used), Year of construction: 2006, CNC machining center - horizontal Manufacturer: HELLER Machine model: MCH 250 Control: Siemens 840 D – Powerline Year of construction: 2006 TECHNICAL DATA - X-axis mm 800 - Y-axis mm 800 - Z-axis mm 800 Travel range along the center of the table, X-axis mm +400 to -400 Travel range vertically above the pallet clamping surface, Y-axis mm +120 to +920 Travel range transversely to the center of the table, Z-axis mm +150 to +950 Feed forces - X-axis at ED S3 – 40% N 15000 - Y-axis at ED S3 – 40% N 15000 - Z-axis at ED S3 – 40% N 17500 Speeds - Feed rate in X, Y and Z axes mm/min 1-50000 - Rapid traverse speed mm/min 50000 - Acceleration in X, Y and Z axes m/s² 4.0 - B-axis (360 x 1° rotary table) max. speed 1/min 25 Rotary table - Division degrees 360 x 1 - max. permissible clamping weight daN 800 - Max. tangential moment Nm 20000 - max. tipping moment Nm 18000 Spindle - Speed range 1/min 45 – 6000 - Tool holder DIN 69893 HSK 100 Form A - Motor Three-phase spindle motor - Drive power max. at the spindle at ED S1 - 100% kW 40 -- at ED S6 - 40% kW 60 -- at ED S6 - 25% kW 70 --- from speed 1/min 500 - Torque max. at the spindle at ED S1 - 100% Nm 765 -- at ED S6 - 40% Nm 1145 -- at ED S6 - 25% Nm 1340 -- up to speed 1/min 500 Tool magazine - Magazine type Rack - Magazine places incl. 2 x 7 setup positions 405 places - Magazine places for max. tool diameter 23 places Pallet changing device - Pallet size mm 630 x 630 - Workpiece dimensions: Swiveling diameter in the working area x height mm Ø900 x 1000 - Pallet changing accuracy in X, Y and Z axes mm 0.01 - Pallet changing time at 500 (800) daN s 12 (14) - Rotary storage RSP 4-fold - Pallets in the system, number 6 EQUIPMENT FEATURES + Coolant system ++ with vacuum rotary filter - high pressure 50 bar (Knoll VRF 250) ++ Coolant tank capacity l 1500 ++ Coolant pump 3 bar flow rate l/min 170 ++ Coolant pump 2 bar flow rate l/min 40 ++ High-pressure pump 70 bar flow rate l/min 22 + Chip removal ++ Conveyor spirals in the machine bed number 2 ++ Diameter mm 160 ++ Transverse chip conveyor ++ Conveyor speed m/min 1.5 ++ Discharge height mm 1200 + Rotary storage RSP 4-fold + Pallets in the system, number 6 + Integrated tool monitoring IPM + Drill breakage control + Measuring probe Renishaw + Status lamp 3 colors + Remote diagnostics via modem Tsdpfxs Agvffj Akisd Machine weight daN 19000 Space requirement basic machine L x W x H approx. m 6.3 x 4.9 x 4.0 Power requirement basic machine kVA 85 Maximum power requirement (including all options) kVA 131 Subject to changes and errors in technical data and specifications.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, CNC horizontal machining center with pallet changer DECKEL MAHO DMC 55 H duoBLOCK Tedpfxs Agn H Uo Akiod Year of manufacture: 2008 Control system: Siemens Sinumerik 840D Machine type: CNC horizontal machining center Number of axes: 4 (X, Y, Z, B) Spindle hours: approx. 46,000 h Travel distances X-axis: 560 mm Y-axis: 600 mm Z-axis: 600 mm B-axis: 360° NC rotary table Rapid traverse X/Y/Z: 40 m/min Positioning accuracy according to manufacturer: ± 0.003 mm Repeatability accuracy according to manufacturer: ± 0.001 mm Main spindle Spindle speed: 12,000 rpm Tool holder: HSK-A63 Spindle power: 20 kW (40% duty cycle, standard version according to manufacturer) Spindle torque: 110 Nm (standard version according to manufacturer) Tool changer Tool magazine: 40 tool positions Tool holder: HSK-A63 Maximum tool diameter: 80 mm Maximum tool diameter with free adjacent positions: 160 mm Maximum tool length: 330 mm Automatic tool change Work table and pallet changer Automatic 2-position pallet changer Pallet dimensions: 400 × 400 mm Maximum pallet load: 500 kg Maximum workpiece height: 850 mm NC rotary table with 360° B-axis Equipment Siemens Sinumerik 840D CNC control system HSK-A63 main spindle with 12,000 rpm 40-position tool magazine Automatic 2-position pallet changer NC rotary table / B-axis Internal cooling (IKZ) Chip conveyor Measuring probe Coolant system Electrical connection data Mains connection: 400 V / 50 Hz Connected power: approx. 58 kVA Maximum fuse rating: approx. 100 A Dimensions and weight Length: approx. 5,000 mm Width: approx. 3,000 mm Height: approx. 2,800 mm Machine weight: approx. 11,000–13,000 kg The machine has been regularly maintained. All hydraulic and air hoses have been replaced. Emergency stop switch on the control panel is defective. Clamping devices and tool holders are not included.

Condition: used, Year of construction: 2006, operating hours: 6,526 h, functionality: fully functional, machine/vehicle number: SN0575, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, nominal power (apparent): 40 kVA, controller manufacturer: Fanuc, controller model: 16i, total height: 2,800 mm, total length: 4,800 mm, total width: 2,800 mm, table width: 400 mm, table length: 400 mm, overall weight: 10,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 6,526 h, spindle motor power: 18,500 W, spindle nose: BT 40, number of spindles: 1, number of slots in tool magazine: 210, Equipment: chip conveyor, documentation/manual, MITSUI SEIKI precision machining center with very few spindle hours, as it was only put into operation in 2017. Tsdez R Rcbspfx Akied Matrix magazine with 201 positions. High-pressure coolant system KNOLL 200/1400. Scraper conveyor chip removal system Knoll 450K-1/290. Fanuc 16iMA. Can be inspected while powered on.

Condition: used, Year of construction: 2004, Technical details: x-travel: 560 mm y-travel: 560 mm z-travel: 600 mm control: Fanuc 16 iMA rapid travel x/y/z: 84 / 84 / 94 m/min feeds x/y/z -stepless: 50000 mm/min spindle drive: 22 kW spindle speed:: 50 - 14000 1/min max. torque on the spindle: 156 Nm size of pallet: 400x400 mm numbers of pallets: 2 table load: 500 kg working diameter: 630 mm workpiece - installed height: 1000 mm change time of pallets: 10 sec distance spindle center to table: 80 -640 mm Distance spindle nose - pallet centre: 70-670 mm tool magazin:: 60 x HSK-A 63 tool changing time: 1 (4) sec max. tool weight: 8 kg max. tool diameter: 70 / 170 mm tool length - max.: 360 mm total power requirement: 64 kVA weight of the machine ca.: 9 t Tedpfx Ae Afyu Tskisd dimensions of the machine ca.: 15 m² Accerories Tool life management Macro B 600 Variables Chip conveyor scraper type Coolant through Spindle 50 bar Knoll VRF unit This well maintained horizontal machining center has a full 4th axis, twin pallet changer, 60 tools magazine for HSK-A 63 toolholders and coolant through spindle 50 bar. An external hydraulic pressure control system for fixtures is provided. A Video of the machine you can see on youtube *

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Machine type Travel distance X Horizontal CNC machining center 1,626 mm* Travel distance Y Travel distance Z 1,270 mm* 1,016 mm* Table size Max. table load approx. 1,626 × 914 mm* up to approx. 4,536 kg, evenly distributed* Spindle drive Tool holder Geared spindle; 7,500 rpm SK 50 Tool magazine Cooling through the spindle (internal coolant) 30 tools Available Measuring probe Axis equipment Available 4th axis or preparation for 4th/5th axis Control Older Haas control Previous approximate value approx. 16 t Tjdpfj Aa Npiex Akijd

Condition: excellent (used), Year of construction: 2014, operating hours: 56,100 h, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, controller manufacturer: Siemens, controller model: 840 D sl, table width: 500 mm, table length: 400 mm, table load: 500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,310 h, spindle nose: HSK-A 63, number of slots in tool magazine: 42, Equipment: chip conveyor, Horizontal Machining Center We offer you: Tsde Agr Nhepfx Akijd Manufacturer: Starrag Heckert Model: HEC 400 D Year of manufacture: 2014 Control system: Siemens 840D sl Operate Technical Specifications: Travel ranges: X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 680 mm Main spindle: Speed range: 8,000 rpm Tool holder: HSK-A 63 NC swivel rotary table: Number of tables: 2 Table clamping surface: 400 x 500 mm Max. table load: 500 kg Tool changer: Number of tool positions: 42 Operating hours: approx. 56,100 h Spindle hours: approx. 5,310 h Technical Features & Accessories: - IKZ - Paper belt filter - Chip conveyor - 2 pallets There are 3 identical machines available. Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 2011, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, 4-axis machine X-axis travel: 650 mm Tedj Afxqbopfx Akied Y-axis travel: 650 mm Z-axis travel: 680 mm Rotary table, swiveling: 360 degrees Operating hours: 55,000 h Tool holder: HSK 63 Spindle speeds: 20,000 rpm Torque at the spindle: 85 Table size: 400 x 500 mm Table load capacity: 0.5 t Chain magazine: 60 positions Chip conveyor Pallet changer Coolant filtration system High-pressure coolant through the spindle

Operating hours: 1,323 h, condition: used, total length: 2,550 mm, total width: 1,850 mm, total height: 1,830 mm, Year of manufacture: 2006 Colour: Grey Empty weight: 4.000 kg Price: On request Tedpfxo Afuqve Akiod - Year: 2006 - CE marking present: Yes - Serial number: 3075777 - Operating hours: 1323 - Drive system: CNC - Control system brand: Haas - Swing over bed [mm]: 584 - Carriage turning diameter [mm]: 241 - Distance between centres [mm]: 508 - Max. spindle speed [rpm]: 4000 - Options: Three-jaw chuck, C-axis, Live tools, Turret - └ Tool magazine [pcs.]: 10 - X-axis travel [mm]: 215 - Z-axis travel [mm]: 508 - Transport dimensions: 2550mm x 1850mm x 1830mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: Fusion 640M, workpiece height (max.): 710 mm, workpiece diameter (max.): 730 mm, workpiece weight (max.): 500 kg, total height: 3,050 mm, total length: 10,145 mm, total width: 9,850 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 11,600 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 15 bar, spindle motor power: 30 W, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak FH 5800 with the Mazak Palletech system. This machine was manufactured in 2001 and is fitted with the Mazatrol Fusion 640M control system. It is a robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. The Mazak Palletech automation system enables more efficient and unmanned production. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 10 Table load capacity: 500 kg X-axis travel: 710 mm Y-axis travel: 610 mm Z-axis travel: 660 mm Table indexing: 360° in 1° increments Spindle mount: DIN 69871A/40 Spindle speed: 35 – 15,000 rpm Spindle motor: 30/22 kW Magazine capacity: 120 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: Tsdpfx Akez Rmq Toisd With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, Year of construction: 2023, operating hours: 1,594 h, functionality: unexamined, machine/vehicle number: 6000030, total height: 3,400 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 27,523 kg, number of spindles: 1, Equipment: chip conveyor, Installation dimensions: 8000 x 6000 x 3400 mm Weight: 27,500 kg Operating hours: 2,594 h KNOLL aerosol extraction system Tedjzbt D Depfx Akied AerosolMaster 4000 ATS S/N 1580192 Year of manufacture: 2022 KNOLL chip conveyor 750 K-1 S/N 1591356 Year of manufacture: 2023

Condition: used, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal arm design, intended for the precise measurement of medium to large-sized workpieces such as components and assemblies. The machine concept is based on a stable cast iron or granite base plate serving as a measuring table, with a guide system attached to the side, which allows for open loading from three sides. Technical Key Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing System: Renishaw PHC10-3 PLUS (interface/controller for motorized rotary/swivel head PH10) Design: Horizontal Arm Measuring Machine (Column Measuring Machine) with integrated base plate Measuring Accuracy (MPE): 15.0 μm + (L / 45.0 mm, total maximum length measuring error in the measuring range is approximately 50.0 micrometers) Sensor System (Standard Configuration): Delivery without PC Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Unrestricted Accessibility: Due to the side-mounted guide of the horizontal arm, the measuring table is freely accessible, which facilitates the loading of heavy workpieces by crane or forklift. Tedpjzz Hywjfx Akied Multisensor Technology: In addition to tactile probing systems (such as the TP20), the series can often be equipped with optical line lasers or scanning sensors by the manufacturer. "One-stop shop: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1998, Ref. -No.: 10671 Manufacturer: TOS VARNSDORF Type: WH 105 CNC Year of construction: 1998 Type of control: CNC Control: Heidenhain TNC 426 PB Storage location: Halberstadt Country of origin: Czech Republic Todpfx Ao Ahky Nekijd Further information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement

Condition: used, Year of construction: 2004, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 670 mm, controller manufacturer: MORI SEIKI, controller model: MSX-501, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 11,400 kg, Features a double pallet system, Mori Seiki MSX-501 control unit, but lacks the pallet lifting motor and the door guide. Workholding fixtures and tools are not included. Tjdozxr U Ijpfx Akisd COLLECTION MUST TAKE PLACE BY SEPTEMBER 2026.

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Fence on the left side Cutting length: 4300 mm Cutting width: 4300 mm Saw blade overhang: 95 mm Motor: 13.5 kW Tjdpez Rrb Dofx Akijd Saw blade diameter, max.: 380 mm With scoring unit Feed rate, max.: 130 m/min With label printer With 7 clamping chucks With veneer trimming stops Control system: Holzma Cadmatic 4.0 professional Availability: approximately July 2027 Location: North Rhine-Westphalia

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Todpe Aduqmofx Akiod SPINDLE Speed range: 240–2,240 min⁻¹ MILLING TABLE Table dimensions: 730 × 200 mm Number of table slots: 3 MACHINE DETAILS MACHINE Machine type: Horizontal milling machine Manufacturer: Hermle Model: FW710 DIMENSIONS AND WEIGHT Length: 1,500 mm Width: 1,200 mm Height: 1,600 mm Weight: 400 kg EQUIPMENT 3-axis digital display, Heidenhain

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Fusion 640M, workpiece height (max.): 1,000 mm, total height: 3,050 mm, total length: 9,850 mm, total width: 10,145 mm, overall weight: 11,600 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 22 W, Equipment: chip conveyor, documentation/manual, We are pleased to offer this very well-maintained Mazak PFH 5800 with the Mazak Palletech system. This horizontal machining centre is a flexible, automated production system and is suitable for unmanned production. The machine was manufactured in 2004 and is fitted with the Mazatrol 640M control system. Tedpfx Aez Rmh Ejkiod Technical specifications: Pallet table size: 500 x 500 mm Number of pallets: 10 Table load: 700 kg Movement X-axis: 730 mm Movement Y-axis : 730 mm Movement Z-axis : 740 mm Table indexing: 360 x1 ° Spindle Taper: CAT 40 Spindle speed: 12.000 1/min Spindle motor: 22/15 kW Magazin capacity: 80 Required floor space: 9850 x 10145 mm We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!