Used Horizontal Hydraulic Press for sale (29,288)

Condition: used, pressing force: 30 t, machine/vehicle number: DF0139, pressure:30 t passage width:1000x1000 mm stroke:800 mm total power requirement:3 kW weight of the machine ca.:5 t dimensions of the machine ca.:3360x1300x1360 mm return capacity:3 t column diameter:75 mm traversing speed:bis 200 mm/sec. :0-10 mm/s :200 mm/sec table height over floor:900 mm distance table - lower edge of ram:1000 mm :126 mm Blodpfxefxykhs Acvsf diameter of piston:71 mm

Condition: new, Year of construction: 2019, machine/vehicle number: DF0329, pressing force: 350 t, pressure:350 t passage width:3000 mm stroke:900 mm total power requirement:75 kW weight of the machine ca.:60 t dimensions:2660 x 5400 x 5700 mm return capacity:35 t Table dimensions:3610 x 1600 mm :3610 x 1600 mm table height over floor:900 mm Blodpfx Aofxygzjcvef pre-running speed:230 mm/sec return speed:170 mm/sec :2000 l max. working heidht:1700 mm pressure speed:21 mm/sec speed rapid traverse:200 mm/sec Oil cooling (electric):3 kW (max) :S7 1500 Monitor:WEG 12 Zoll

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. Blsdpfx Acsfxyh Aevef :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressing force: 63 t, pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Blodpfxsfhcc Ue Acvof Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: used, Year of construction: 2001, machine/vehicle number: H01-3129, pressing force: 200 t, pressure:200 t passage width:1300x1300 mm stroke:1000 mm total power requirement:37 / 5,5 kW weight of the machine ca.:29500 kg dimensions of the machine ca.:2600x3000x5200 mm Bledpsfhcc Nofx Acvsf speeds::450 mm / freier Fall speeds::20 mm/sek tracking travel:130 / 60 ms oil pressure :283 bar capacity of oil tank:2200 L

Condition: used, Year of construction: 2017, pressing force: 500 t, pressure:500 t passage width:1300x800 mm stroke:600 mm weight of the machine ca.:18 t dimensions of the machine ca.:2400 x 2400 x 5500 m draw back pressure:50 t Controll:Zweihandbedienung cylinder:1 Stück motor:50 kw Oil Cooling:elektrisch column diameter:200 mm work height max.:700 mm Table dimensions:1900 x 800 mm table height over floor:1000 mm pestle plate:1300 x 800 mm pre-running speed:150 mm/sec work speed:5-10 mm/sec. Bodpfed E Irmsx Acvolf return speed:150 mm/sec :1500 l quantity of oil:1400 l

Year of construction: 2020, condition: like new (used), pressing force: 150 t, pressure:150 t stroke:500 mm Weight of machine approx.:ca. 8,5 t dimensions:1200x1800x3100 mm Engine Output:10 kW Max Working height:1000 mm Approaching Speed max. :9,9 mm/sec Pressure Speed:100t = 9,9 bis 0 mm/sec Table height above ground level (approx.):1000 mm Blodpfodxvfisx Acvef :Schmiernippel column diameter:230 verchromt mm Return Speed:25 mm/sec :500 l demand for oil:ca 400 l Maintenance Balcony:5800 ? :3900 ? :2800 ? :4800 ? :29000 ? :8200 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

Condition: new, Year of construction: 2018, machine/vehicle number: DF0116 - Rev.00, pressing force: 110 t, pressure:110 t passage width:1300 mm stroke:1500 mm Weight of machine approx.:12 t dimensions:ca. 2300 x 2090 x 4200 mm Blsdpfxedxvfle Acvsf return capacity:11 t Max Working height:1500 mm pestle plate:1730 x 1100 mm table plate:1730 x 1100 mm table height over floor:700 mm column diameter:140 mm Thickness of ram plate:100 mm thickness of clamping plate:100 mm Noise Level (Max.):67 dB Color machine body:7035 RAL Color moving parts:2009 RAL Colour other components:7021 RAL Colour of balcony and casing:1021 RAL motor capacity:18 kW Approaching Speed max. :300 mm/sec pressure speed:15 mm/sec Oil Tank Capacity:150 l Siemens Control System:S7 1200

Condition: new, machine/vehicle number: DF0279, pressing force: 1,000 t, pressure:1000 t Blsdpsfxyiyefx Acvof passage width:1500 mm stroke:800 mm total power requirement:91 kW weight of the machine ca.:68 t dimensions:3850 x 2900 x 6000 mm return capacity:100 t Table dimensions:1500 x 2250 mm :1500 x 2250 mm table height over floor:1300 mm pre-running speed:200 mm/sec return speed:200 mm/sec Pressure Speed:10 mm/sec :1200 l Oil cooling (electric):1,5 kW (max) Max Working height:1000 mm :200 mm/sec Monitor:12 Zoll

Condition: new, Year of construction: 2017, pressing force: 150 t, machine/vehicle number: DF0149, pressure:2x 75 / 150 t passage width:2050 x 965 mm stroke:800 mm total power requirement:Hauptmotor 22 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:1500 x 1025 m :150 mm :150 mm :72 mm :2 kW :870 x 350 x 150 mm :1500 x 600 x 150 mm :1500 x 1025 x 75 mm :1500 x 1025 x 150 mm :120 mm :80 mm :350 l demand for oil:320 l :350 mm max. open height:1600 mm :15-0 mm/sec :100 mm/sec Bodpfxsd Aftpe Acvelf :2050 x 965 mm :6 mm :0,5 mm

Condition: new, Year of construction: 2019, machine/vehicle number: DF0277-Rev06, pressing force: 10 t, pressure:10 t distance between columns:200 mm stroke:200 mm weight of the machine ca.:1,5 t dimensions of the machine ca.:2000 x 1420 x 760 m heating plates :660 x 210 mm :200 mm :200 mm Bedpoffamyjfx Acvjlf Oil Tank Capacity:70 l Table Height:1100 mm :125 mm Ram Height:250 mm

Condition: good (used), Year of construction: 1997, machine/vehicle number: 97013, Offer 26056 Technical Specifications: - Pressing force: 30 t - Infinitely adjustable pressure: 0 - 25 t - Stroke length approx.: 0 - 200 mm - Max. installation depth approx.: 200 mm - Tool height up to approx.: 150 mm - Bending capacity e.g.: – Flat steel approx. 150 x 15 mm – Square steel approx. 30 x 30 mm - Positioning control: SIEMENS OP 5 – A2 - Drive: 400 V / 4.0 kW Bjdeyv D U Rjpfx Acvolf - Required space approx.: W 1400 x H 1100 x D 700 mm - Weight approx.: 900 kg - Bending beam - Various round bending tools

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 052302303, Bobst Easypress 142, for the format 102x142cm to carry out models, test punching, preparation work for the production machine. excellent condition, year of construction 1997 Bedeuk I Nxjpfx Acvslf

Condition: used, input voltage: 380 V, pressing force: 100 t, Hydraulic press Brand: Francisco CAMP Force: 100 tons Maximum piston stroke: 150 mm Motor: 2 HP Power: Three-phase 380V Operation by pedal/control panel Blsdex Syc Nopfx Acvjf Table dimensions: 780 x 330 mm Clear press width: 780 mm Clear height from table to piston base: 400 mm

Condition: good (used), Year of construction: 2004, pressing force: 450 t, overall weight: 40,000 kg, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Blsdeu Au U Tspfx Acvof Motor power: 30KW

Condition: new, MVD SERIES B - 3,100x135Tn SERIES B - 4 Axes Bledpfx Aexfzpzocvef Large press brake for achieving outstanding bends and flawless workpieces The body and upper beam are of steel construction, designed according to minimum and optimum strength criteria. Model: B135/3100 Bending force: 135 tons Bending length: 3100 mm Distance between uprights: 2600 mm Ram stroke: 260 mm Daylight: 465 mm Throat depth: 410 mm Table height: 940 mm Length x Width x Height: 4690 x 2340 x 2980 mm Approach speed: 210 mm/s Return speed: 130 mm/s Bending speed: 10 mm/s Oil tank capacity: 180L Main motor: 11 kW Weight: 7,750 kg Standard features: CNC 3 axes Y1, Y2, X 260 mm stroke, 410 mm throat depth ESA S630 CNC control unit ± 0.03 mm precision SERVO-driven, motorized rear gauge X = 750 mm Promecam quick-release punch holder Sliding front sheet support arms Special narrow bottom table by MVD (European type) GIVI optical linear scales Standard punch tooling (H: 67, 850 R:08) Standard die tooling (60x60 mm, 4 Vee V=16-22-35-50 mm, 85°, H:60) LED lighting in RAM Optional features: Choice of X-axis backgauge options with 2-4-6-8 stops Wide bottom table for Multi Vee forming dies Anti-deflection crowning with original Wila wedges AKAS or DSP front laser safety systems Additional backgauge fingers Front laser safety

Condition: used, Year of construction: 2003, pressing force: 120 t, overall weight: 12,000 kg, Hydraulic Press Brake Brand: Hidrogarne / Ermaksan Model: AP 4100-120 Year: 2003 Power: 11KW Weight: 12,000kg Bending length: 4100mm Blodpfx Aex Tp Auscvef Force: 120t Approach speed: 80mm/s Working speed: 8mm/s Y-axis and X-axis back gauge control with ELGO control system. PROMECAM punch holder. Supplied with: - 4m one-piece die, 90x90mm with several V openings - 4m gooseneck punch, 90mm height, in 835mm sections and some additional smaller pieces - Also comes with sets of straight and 30-degree punches (see pallet photos of punches)

Condition: used, Year of construction: 1988, Max. pressing force: 1,600 kN Main drive: 30 kW Speeds: Rapid down I: 290 mm/sec Rapid down II: 130 mm/sec Working down I: 39 mm/sec Working down II: 17 mm/sec Rapid up I: 290 mm/sec Rapid up II: 130 mm/sec Alternatively, infinitely variable drive: Drive power: 37 kW Rapid down, variable: 360 mm/sec Working down, variable: 23–48 mm/sec Rapid up, variable: 360 mm/sec Bsdpfx Acoyxqt Sovjlf Ram stroke, max.: 150 mm Max. installation height: 450 mm Ram area: 700 × 700 mm Table area: 700 × 700 mm Table through-hole Ø: 180 / 150 mm Clear spacing between uprights (front): 750 mm Clear spacing between uprights (side): 250 mm Table height above floor: 850 mm Ram bore Ø H7: 60 mm T-slots in table and ram H12 (DIN 650): 22 mm T-slot arrangement: to be defined Machine footprint, approx.: 1,500 × 1,700 mm Machine height, approx.: 3,150 mm Machine weight, approx.: 14,000 kg

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Bodpfxoudph Io Acvslf

Condition: excellent (used), I sell a Lukas baler in very good condition. Blsdpfxoum Htzj Acvjf

Condition: excellent (used), Year of construction: 1992, Hydraulic Press Brake Manufacturer: DARLEY Model: EHP 150 - 43/37 Very good condition, Year of manufacture: 1992 Technical specifications Brand: DARLEY Model: EHP 150 - 43/37 Year: 1992 Working length: 4,300 mm Press force: 150 t Distance between uprights: 3,700 mm Bedpfxoh U A Ibe Acvjlf Ram stroke: 175 mm Motor power: 11 kW Dimensions: approx. L 4.7 x W 1.6 x H 3.1 m (transport height 2.85 m) Weight: approx. 16 t Equipment: • Delem DA 58 CNC control • Block die: V14, V60, V40, V24, V12, V30, V22, V10 • Straight punch, height 195 mm, sectioned • Controlled axes: Y1, Y2, X, R, Z • Motorized crowning • 2 support arms • Operating manual + inspection books All information provided without guarantee. A powered demonstration is available at any time in our showroom.

Condition: good (used), Year of construction: 2015, functionality: fully functional, pressing force: 2,500 t, table width: 2,500 mm, table length: 5,000 mm, total length: 8,000 mm, total width: 8,000 mm, total height: 9,000 mm, overall weight: 55,000 kg, Equipment: safety light barrier, LOIRE SAFE Hydraulic Press – High-Performance System for Toolmaking and Heavy-Duty Forming This high-performance hydraulic press in a robust 4-column gantry design has been specifically engineered for demanding applications in toolmaking (tryout/spotting) as well as for large-format forming processes. The stress-relieved, annealed welded construction ensures maximum rigidity and long-term process stability. Bedpfx Acjyw Ah Eovolf The machine is equipped with three main cylinders featuring multi-cylinder parallel control, achieving high repeat accuracy within ±0.1 mm. Its powerful hydraulic system, based on Bosch Rexroth components, operates at a maximum working pressure of approximately 450 bar, enabling precise and forceful processing. Control is provided via a Siemens S7-317F PLC, combined with servo-controlled axes (Rexroth MLC) and visualization via Siemens WinCC. This setup allows for fully programmable press cycles, storage of tool parameters, and user-friendly operation with diagnostics and fault monitoring. In terms of safety, the press is comprehensively equipped: light curtains at the front and rear (Category 4), ram parallelism monitoring, emergency stop with defined response time, and optional two-hand operation ensure maximum operational safety. The system is CE-compliant and meets current safety standards. Features include a hydraulic, three-section draw cushion, a hydraulic ram cushion, as well as a movable table with approximately 4,000 mm stroke. The machine is complemented by a DIN-standard ram plate and integrated cutting impact damping for challenging forming processes. Toolmaking (Tryout / Spotting)

Condition: used, Year of construction: 1972, machine/vehicle number: 703, input voltage: 380 V, type of input current: three-phase, pressing force: 200 t, stroke length: 620 mm, table width: 1,200 mm, table length: 730 mm, table height: 1,160 mm, distance table to ram: 870 mm, clearance between the columns: 1,280 mm, oil tank capacity: 300 l, total length: 2,000 mm, total width: 1,600 mm, total height: 3,200 mm, overall weight: 11,280 kg, control cabinet height: 670 mm, control cabinet length: 300 mm, drop-through hole in table: 30 mm, working height: 1,160 mm, working range: 1,280 mm, Equipment: documentation/manual, Hydraulic Press GIGANT (Costruzioni Oleodinamiche) 200-ton, operational and available for sale. Machine equipped with drilled/slotted worktable for clamping and setups, complete electrical cabinet, and hydraulic system. Documentation available (manual/schematics). Main specifications: - Pressing force: 200 t - Overall dimensions (W×D×H): 1600 × 2000 × 3200 mm - Weight: 11,280 kg - Table height from floor: 1160 mm - Max opening (daylight): 870 mm - Min opening (daylight): 250 mm - Ram stroke: 620 mm (870–250) - Usable clearance between columns (X): 1280 mm - Usable clearance front/rear (Y): 600 mm - Usable working area: 1280 × 600 mm Table / clamping: - Through holes: Ø 30 mm - T-slots: 2 × (730 × 20 mm) + 2 × (1200 × 20 mm) Electrical / hydraulic system (nameplate data): - Power supply: 380 V – 50 Hz (three-phase) - Motors: 15 + 15 HP - Oil tank: 300 L (schematics/manual) GTP 200/2-E configuration with dedicated circuit and available electrical/hydraulic diagrams. Electrical cabinet (external dimensions): - 670 × 500 × 300 mm (H×W×D) Condition: used Bljdpfx Aceyl Nrrjvjf Documentation: yes (manual/schematics). Transport: at buyer’s expense, loading by seller.

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Bljdpjfxygwjfx Acvjf Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: excellent (used), Year of construction: 1960, pressure 25 t Bedpfxjyrtwfe Acvjlf weight of the machine ca. 25 t