Four Column Press - Hydraulic

OTT 300K300-50

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 160 t, Hydraulic 160 T double cylinder insertion press Double column press- two cylinder press with 160 T capacity at 250 bar. a) idle speed downward 9,8 mm/sec. b) upward speed up to 15,0 mm/sec. c) table size 1500x600x100 mm, height adjustable d) ram plate, 1500x600x100 mm e) year of construction 12/2020 f) motor power 11 KW g) pump capacity 22 L/minute h) travel limitation by cam switch i) Open height 700 mm j) ram travel 500 mm k) Remote control via two-hand operation l) Pressure setting via rotary control from approx. 30 to 160 T Dwedpfxegz H Dho Acysd m) Approx. height 2800 mm n) T-slots according to customer requirements o) Weight approx. 4,200 kg p) Oil tank with approx. 200 L volume q) Painting in RAL 5005 ( royal blue ) or according to customer's request. r) For safety reasons the ram plate is painted orange RAL 2009 or signal yellow RAL 1023 s) Assembly, commissioning, instruction can be provided at a separate charge. The travel can be adjusted by cam switches. The ram/table size of the machine shown is 1600x600x100 mm.

Year of construction: 2004, condition: good (used), Newsmith Crate / Tray Washer Up to 800 crates / hour All stainless steel Wash pump with detergent or soap agent facility Rinse pump with rinse agent facility Adjustable wash temperature controls Drive conveyor with 3 speed control selector Dwodpfx Aema E Hcecyod All safety controls and e-stops Gas burner (can be changed to oil) Complete with extractor fan Ready for use

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Dwodpfx Aog Rn Efscysd Without transport costs.

Condition: new, Balkaya Profile Ring Bending Machine HBM 80 Technical Specifications: Tool holder, shaft: 80mm Tool: 245mm Working speed: 4.5m/min Motor: 4kw Hydraulics: 30 tons Dimensions L-W-H: 1450x1050x1800 mm Weight: 1400kg 3 driven rollers Hardened standard rollers Hardened and ground tool holder, shaft Mobile control panel Horizontal and vertical working position Digital display Complies with CE standards Dodpjh T Ulnsfx Acyswd

Condition: used, Year of construction: 1991, pressure 400 t stroke 300 mm table surface area 1200 x 700 mm ram surface 1200 x 700 mm dayligth 500 mm adjustment of stroke 300 mm return capacity 348 kN capacity of ejector 100 kN ejector stroke 100 mm control SIEMENS Simatic S 5 total power requirement 65 kW weight of the machine ca. 28 t dimensions of machine L x W x H 4,4 x 2,75 x 4,0 m = hydr. punching and embossing press Dwedpotqqlcjfx Acyod Accessories: tool changing table - with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 m

Condition: new, Year of construction: 2026, HT1C Scissor Lift Pallet Truck The HT1C Scissor Lift Pallet Truck is a functional and durable material handling solution designed for lifting and transporting loads up to 1000 kg. Thanks to its scissor lift mechanism, the truck not only enables pallet transportation but also raises loads to a working height of up to 800 mm, making it particularly useful for assembly operations, goods packing, and order picking areas. The HT1C is an excellent choice for workshops, service centers, warehouses, loading docks, and delivery vehicles. Key Advantages of the HT1C Pallet Truck Dsdpfx Ajricw Ascyowd 1000 kg load capacity – enables safe handling of heavy loads in various working environments. 800 mm lifting height – raises loads to an ergonomic working level, improving comfort during processing, loading, and unloading operations. Scissor lift mechanism – provides a stable construction with a simple and reliable fork lifting and lowering system. 1150 mm fork length – compatible with standard Euro pallets. 540 mm fork spacing – allows versatile handling of different types of loads. Compact design – enables easy maneuvering in confined warehouse and workshop spaces. Construction and Technology – Durability in Practice The HT1C is manufactured from high-quality steel, ensuring excellent durability and resistance to dynamic loads. The reinforced scissor mechanism provides a long service life while maintaining safe and stable lifting performance. The minimum fork height of 85 mm allows easy access underneath pallets and loads. Thanks to its compact overall dimensions of 1600 × 540 × 1210 mm, the truck requires limited storage space and is convenient to handle in everyday operation. The HT1C is equipped with 180 × 50 mm steering wheels and 78 × 70 mm load rollers, providing smooth movement, stable guidance, and reliable operation on various surfaces, including areas with limited working space. Applications – Efficient Material Handling The HT1C is designed for applications where pallet transportation must be combined with temporary lifting of loads to a comfortable working height without the need for additional lifting equipment. It is ideal for: Workshops and service centers Assembly and quality control stations Loading and unloading areas for delivery vehicles Warehouses and production halls Packing and order preparation lines Its ergonomic design reduces operator effort, improves workplace safety, and minimizes the risk of injuries caused by improper lifting posture. Standard Equipment Scissor frame made of hardened steel High-quality steering wheels and load rollers for improved mobility and stability Hydraulic lifting system with manual pump Standard 1150 mm forks for Euro pallet handling Technical Specifications – HT1C Specification Value Lifting height 800 mm Load capacity 1000 kg Fork length 1150 mm Fork spacing 540 mm Minimum fork height 85 mm Steering wheel diameter 180 × 50 mm Load roller diameter 78 × 70 mm Weight 110 kg Overall dimensions 1600 × 540 × 1210 mm

Condition: refurbished (used), Year of construction: 2020, pressing force: 500 t, pressure:500 t passage width:1100 mm stroke:600 mm weight of the machine ca.:ca. 22,8 t Table area:1100 x 800 mm ram surface:1100 x 800 mm Daylight Opening:800 mm Hydraulic:300 bar closing speed:60-200 mm/sec pressing speed:0 - 9,5 mm/sec opening speed:28-200 mm/sec Table height above ground level:900 mm height over floor:5100 mm workpiece weight max.:2000 kg workpiece weight top:1000 kg halls height:min. 6500 mm Number of pressing cylinders:1 St. Dwjdoffamvopfx Acyjd number of driving cylinders:2 St. :ca. 270 Lt./min. Oil Tank Capacity:600 l main drive:75 kW Control technology from Siemens:S 7 Safety control:PILZ Multi

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 22-009, Rotary spray cleaning machine YM-850 The YM-850 rotary spray cleaning machine is designed for efficient cleaning of industrial parts with hot pressurized water and biodegradable cleaning agents. This machine has very low running costs and low consumption. The machine frame and body are made of high quality corrosion-free stainless steel. This machine is the right choice for cleaning oil, grease and production residues on the surface of workpieces as well as for corrosion protection applications. The YM machine has stainless steel pump, spray nozzles, heating elements and motorized basket design as standard. - Spray cleaning system for small to medium batch sizes, - for workshop, maintenance or intermediate cleaning - Cleaning with hot water - Spray cabin as a top loader Dwodpfjtwmxyex Acyjd Technical details: Basket diameter: 700 mm Loading height: 380 mm Tank capacity: 120 liters Pump pressure: 8 bar Heating: 7.5 kW maximum loading weight: 120 kg Connection: 220-380 volts - 3 phases Timer: 0-30 mins Thermostat: 0-60 C° Stainless steel body: 430 AISI Filter cups: 2 pieces - 2-3 mm perforation Internal filter: 100µ

Condition: used, Year of construction: 2010, Mazak VCN 510C-II (Vertical Center Nexus) With Mazatrol Matrix Nexus control, 12,000 RPM 18.5KW BT40 spindle, with tool setter and swarf conveyor. Due into Bristol in March 2026 when more pictures will be uploaded. Specification: Control System: Mazatrol Matrix Nexus Djdpjyh N Aajfx Acyswd Table Size: 1300 mm x 550 mm Maximum Table Load:1200 kg X-Axis Travel: 1050 mm Y-Axis Travel: 510 mm Z-Axis Travel: 510 mm Spindle Speed: 12000 RPM Spindle Taper: BT40 Spindle Motor: 18.5 kW Tool Storage Capacity: 30 tools (Standard) Tool Change Time (Chip-to-Chip): Rapid Traverse (X/Y/Z): 36 m/min Weight: ~ \(6900\) - \(7100\) kg Machine Dimensions 3870 x 2819 x 2842mm Control System: Mazatrol Matrix Nexus Specs: X 1050 Y 510 Z 510 / 12,000RPM / BT40 Accessories: Tool setter and swarf conveyor

Condition: excellent (used), Year of construction: 2013, operating hours: 2,579 h, functionality: fully functional, input voltage: 380 V, We are offering this well-maintained JUKI GKG-GL, KE2070, KE2080, RS800N + Chiller SMT placement line, year of manufacture 2013. The line has low operating hours and was used exclusively for our own products. We are not a service provider; only single-shift operation. The line has been serviced annually by JUKI and is in excellent condition. KE2070 operating hours: 5751 h KE2080 operating hours: 2579 h Due to circumstances, sale only as a complete line, no cherry-picking. Loader and unloader are included, but not the ones shown in the video – instead, units from Rommel will be supplied. Manufacturer: JUKI Model: GKG-GL, KE2070 (5751h), KE2080 (2579h), RS800N + Chiller Year of manufacture: 2013 Machine type: SMT placement line Dodpfxjy Axcvs Acyswd Available from the end of July 2026. We are happy to assist with dismantling and loading by a local specialist company. If you have any questions or need further information, please do not hesitate to contact us by message or phone.